1,706 models
The Eiffel Tower showed up with some stringing. This Test Model is intended to vary parameters Print instructions PLA Prusament 0,15 Standard Quality Mode
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Stringing Test für PETG mit unterschiedlichen Temperaturen. Von unten 260°C bis 235°C
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
You can show off your love for Peeps and add some Easter flair to your hoodie drawstrings! They make a perfect gift for your co-workers! Print a pair in every color! Print one pair in 30 minutes and uses under 5 grams of filament! They…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
A very useful tool, when you have to exchange strings on many guitars Nothing special about the print. Standard PLA, Standard Settings. Used Brim, but not sure if it's needed. Found at https://www.thingiverse.com/thing:2842644
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Another stringing test, prints fast, requires little filament. Prints in 10-15 minutes.
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Guitar string winder drill bit (standard 1/4 inch) for use with accu drills / screwdrivers. The included f3d file uses user parameters if you need to adjust anything.
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
The Centring Square is an essential tool for precision work. It helps you easily find the center of round diameters – perfect for drilling, marking, or alignment tasks. Why choose this tool? ✔ Always useful in the workshop and for 3D…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
A replacement for a common type of ball-shaped, spring-loaded stopper, for tightening drawstrings on clothes, bags, etc. You'll need: 1x print included “Body” model 1x print included “Plunger” model 1x spring +-11mm long, +-7.5mm outer…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Be sure to upload makes!
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Next time the drawstring comes out of your garment, instead of struggling to get it back in, print this model and easily fead it back through (almost like a giant needle!). This is very fast to print and uses very little filament. This…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Designed to fit comfortably on finger or held in hand, this lightweight and portable gadget is perfect for stress relief, focus enhancement, or simply showing off your 3D printing skills. Printing advice: Print oirentation: print it on…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
diameter : first circle:3mm second circle: 5mm square:4x4mm and last random shapes separated by 2mm the whole is 80x20x41mm (without a base 40mm)
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
🧵✨ If you are tired of struggling with re-threading drawstrings on your clothes, you need to try this 3D printed version of a Drawstring Threader ✨ Available in five different widths (6mm, 9mm, 12mm, 15mm, and 18mm), our threader needles…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
This is a print in place model of a moving gingerbread man. No glue required, only some string ! 🍭🍪 You can also try a more difficult little Elf or maybe the Nut Cracker . This Gingerbread man is the easiest one to print :) You can do a…
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for one variant
Prusament PLA Galaxy Purple Fillamentum PLA Crystal Clear Smaragd Green Height: 270mm Staff Inset Diameter: 35mm Scale Accordingly No Supports Required Printed with 5% Infill
Print approx. €4.13–€5.05 excl. taxPreliminary estimate for one variant
UPDATE 22.2.2022: added lock with honeycomb protection agains fingers (kids friendly) - inspiration here Info: just like original (thanks for upload Mikolas Zuza!) added eyelet , so it can hang somewhere (like your neck for example) kids…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
This is another “string winder” to wind and manage the line for flying a kite. Most designs I have seen were too small for my taste. That is why I made my own design. When you like a smaller „winder“ you can scale it. Of course you are…
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant
Transforms your Einhell Single-Blade Trimmer into a string trimmer. Use at your own risk, the wire might get loose and fly off at high speeds, which can lead to injuries, always make sure to wear proper safety gear. Printing Choose an…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
Version 2.2 now available Minor errors fixed (see version release notes below). Assembly Guide finished! The assembly guide has now been been completed, containing 38 pages with over 60 diagrams to assist in creating the banjo from start…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Temp of nozzle is the main cause of stringing. Print this gcode before trying other adjustments. It starts at 220C, and automatically decreases 5C after each 5mm increments, ending at 180C The picture shows the results when filament is…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
This is a remix of a string art design by 3DPrintBunny ; I have added the base with spiral pattern and hanging ‘notch’ on the back. I am including all files. However, I strongly recommend you do not change any print settings. They are 3D…
Print approx. €6.25–€7.64 excl. taxPreliminary estimate for one variant
The model can test your stringing and oozing behavior quite efficient up to 5 colors. The 3mf file has already sliced the 5 colors for you. It's sliced in the Alpha 2.7 Slicer version with Inputshaper, be aware about that. It's at the…
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant
Roll up your string of tree lights on this reel. It will reduce the anxiety next year when unraveling the lights. During the unroll this year, the tangled lights brought me anxiety. So, I am going to try this in January and December 2023.…
Print approx. €3.86–€4.72 excl. taxPreliminary estimate for one variant
Print in place Droid that moves when you pull the bottom “zipper” This model prints in place and no assembly is required. You can also do a simple color change in a certain height to get a visually interesting effect and nice contrast.…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for one variant
This is the spool cover for a Toro string trimmer. My trimmer is a model 51486 (24 Volt lithium) but I have seen a lot with this same cover. If yours looks similar, give this a try and let me know in the comments if it works for you. It's…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for PETGSource material: PET
Printing a floating spiderweb mid-air and direct print a spider on it, all without support? Is it possible? The original idea. I can't remember exactly when this idea originated in my brain (probably short circuit), but after the many…
Print approx. €0.32–€0.40 excl. taxPreliminary estimate for one variant
Shank size is 8 mm. It can easyly be changed into the file (centring-mandrel.scad). This is my first model with OpenScad.
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Just a simple bookmark 3 layers (of 0.2mm) thick with fantasy strings. Easy fast print. The central line is added for strength. The extra bulge (can be folded over with V1 and is present in fixed form in V2) is to prevent the bookmark…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
A string winder for my basses/guitars, 100% fill, printed with PETG and Prusa slicer. It can also be used with an electric screwdriver.
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
This generator will make all common size elastic threaders (also known as tape threaders and bodkins). It will also make a drawstring threader for round cord. How to use the Generator You may customize just about every dimension to create…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Change strings on your ukulele faster and easier. Internal dimensions for the tuning peg are 9x19 mm - will fit most ukulele brands. Only 10 grams of filament. Designed as print in place, prints as 1 piece, no assembly needed. Just…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
A perfect model to test your printers ability to properly retract filament, and test its bridging capabilities. This is done with two small towers either side causing the printer to have to travel across the middle on each layer. If the…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
This adorable little creature is a simple mechanical toy that takes only 10 minutes to print. Thread a piece of string through the holes on the reverse side and hook it onto anything. Then by alternating pulling the left and right end…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
As much as I like string lights, I think they don’t really fit the vibe of the spooky season. I was thinking about how I could add a little halloween flair to my battery-operated LED string lights and this is the result. I’ve used…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET
I made this model to secure our Philips Hue Festavia string lights to the top of our terrace fence. The top of the fence has the following dimensions: H: 4 cm (1.5748 in), W: 2.9 cm (1.14173 in). The fence also has a small 2mm indentation…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
With this sturdy and versatile mount, you can easily hang string lights for a warm, inviting atmosphere. Perfect for restaurants, patios, or home decor, these mounts keep your string lights securely in place while allowing for…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
Centring angle for marking the centre or a 45 degree angle on round or square workpieces. There are two hexagonal holes on the underside for pressing in or gluing Ø7x1 magnets. Zentrierwinkel zum Anzeichnen der Mitte oder eines…
Print approx. €2.37–€2.90 excl. taxPreliminary estimate for one variant
A simple string art model to display on your desk. This is an 80mm x 80mm x 20mm circle with delicate strings. The strings form a curve on on side with a good amount of negative space. There are two versions, one with and one without a…
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for one variant
Crochets à visser pour fixer des tringles ou barre à rideau. Buse 0.4 mm PLA ou PETG Couche 0.2 Remplissage 15% gyroïde 3 périmètres Assemblage: Visserie / quincaillerie Vis TF 3,5 x 20 Qté 4 pour une paire de support un rond de diametre…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Christmas challenge Challenge yourself and print this Christmas tree and share your results. Design This tree was carefuly designed to be fully printable without supports. Printing tips? no supports higher retractions lower speed lower…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
Jeep logo clothes button. Comes in two pieces, one is the button and the other is the Jeep logo that snaps into place of the button holder to hide the button strings.
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Mount a reel of badminton strings to an Ikea Skadis board. Printing Instructions A complete set of this model requires: 1 print of the reel holder 2 prints of the lock clip No supports needed for printing. I used PETG for my prints but…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
A mod kit for the TF2 pistol by methanejuice. Please rate, like, and download so I can get free filament and keep making models. Adds: Picatinny rail on the blaster prime, a larger tip, sight, and a larger mag. Aravage Range: 196.55in…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for PETGSource material: PET
Test the Circle Kalibration
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
I've searched for quite a while and can't really seem to find any good, modern, 12mm humbucker bobbins for 7 string. So I took the time to learn Fusion and made some myself. Hope these work for everyone, it WAS my first experience…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant
Flower for keychains or necklaces. This model has a bigger hole than my others so you can put a bigger string, twine or anything through it. The pink/black one is made on my Bambu X1C and the multicolored is on my Prusa Mini. Enjoy!!!
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
I use r0tring isograph technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that friction…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
I saw 3dPrintBunny's Layer String art and wanted to replicate it, this is my version designed with a hexagonal theme. Print using: .2mm Layer Height .4mm nozzle (.6 may work) My Print (Core One): Creality Hyper PLA (Spring Lake) Note: You…
Print approx. €3.61–€4.41 excl. taxPreliminary estimate for one variant
Economical and fast to print string test for quick iteration over different parameters that might influence stringing on your printer. Printing Parameters Print this in the layer heigth you want to use or a medium setting, something like…
If you like these maybe you also like my Stringart Stars or the bigger Stringart Flower
Print at 0.3mm layer height. Print without supports. You should be able to see the strings in your slicer preview If using Bambu Studio make sure your wall generator is set to Arachne. See a video of the artwork here:…
I designed these to be printed very quickly so you can test your retraction settings without wasting a lot of time/filament.
Hello fellow nerfers! This is SKLEP mk1, my free time project I've been working on for the past month. This is a single firing string blaster that uses (and ejects) Flypoint/ Kirin shells. It fires half length darts. You can still use it…
Cute skull drawstring beads for your clothes.No glue needed, just slide them up the drawstring. Easy to print! Only 2g filament per set! Three sizes available (diameter of the hole): 4mm 6mm 8mm 4mm and 6mm are properly the most common…
Everyone's favorite low poly skull beads! Properly test-printed and optimized for the best results. Hole size is 3, 5, 7, and 9mm. Print settings: Filament: PLA Nozzle: 0.25, 0.4mm Layer height: 0.10 - 0.20mm Support Type: Organic (Tree)…
If you've ever needed to re-thread a drawstring for a hoodie, you know it can be tricky. After struggling with this once I designed these drawstring threader needles to make the process much easier. Simply pass the end of the string…
Rather than setting layer temperatures manually for a temp tower, just include one line of G-custom code in PrusaSlicer's “before layer change G-code" section to do it automatically. You can use the attached .3mf file as a starting point…
Since I could not find the ideal temp tower that meets my expectations, I designed my own. Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the…
Activate firmware retraction in your slicer. Activate firmware retraction in klipper by adding this to you printer.cfg : [firmware_retraction] retract_length: 0.8 retract_speed: 60 unretract_extra_length: 0 unretract_speed: 60 Slice the…
A fragmented skull suspended in a string frame. Print at 0.24mm layer height without supports If using Bambu Studio make sure your wall generator is set to Arachne If using Cura make sure 'print thin walls' is checked. If you want to…
For STL user : You can print in full but to reduce support cut at horizontal below the stand with a support blocker on the stand side starting at 2mm (full plate) Experience the thrill of aviation with this meticulously crafted model of…
No fancy settings, simple design. You can Support me by making a small donation: https://www.paypal.me/sharad1209
This test part is optimized so that you can print it quickly to achieve many iterations in a short period of time without wasting too much filament.
Couldn't find a decent mount for these so I made it myself. They are not perfect, but work great for me. Only caveat is being that these tools weren't designed with mounting in mind actually placing them on the mount is a little tricky.…
Very good string test. It does not have problems with slicing it in Prusaslicer anymore.
File for testing retraction
This is a very long snake (over a meter long), which has a small hole in the head to insert fishing line through. I personally use this as a cat toy, but it could be used to scare some friends! In the pictures, the model is scaled down to…
petit test pour le stringing Print Settings Printer: Alfawise U30 Rafts: No Category: 3D Printing Tests
I designed a 3D printable string action gauge/ruler that can be used to measure the string action on a guitar or ukulele. It features measurements in both millimeters and fractions of an inch. It can be optionally printed in two colours…
New Dual Colour version! I recently redesigned the text label to make the most of owning a multi colour printer. This prints well on a 0.4mm nozzle, just make sure you have good 1st layer adhesion. Set of 5 common radius, and some less…
Introduction A multifunctional tool that allows the following 4 main functions for use in the workshop: 1: Protractor, measurement and drawing of angles. (0 to 180 degrees)*. Debossed legends are included to indicate the angle#. Radial…
A String Biplane model with spinning propellor and wheels. Print the Biplane file at 0.3mm layer height and if using Bambu Studio make sure your wall generator is set to Arachne. All parts are printed without supports I found a brim…
Remix to fit my EGO string trimmer better. The original mount worked well for a trimmer that had a round shoulder, but this fits better with trimmers that have a rounded off square shoulder.
Read the guide on stringing and oozing: https://help.prusa3d.com/en/article/stringing-and-oozing_1805 Test different retraction lenghts and temperature settings. About 8 minutes print time.
Heart suspended in strings artwork. Single and dual colour versions available Print at 0.2mm layer height If using Bambu Studio make sure your wall generator is set to Arachne. See a video: https://vimeo.com/860773935?share=copy
The Modular Fiddle is a platform for violin-family instruments. I make professional quality electric violins using the Modular Fiddle platform. The files listed here make the latest-and-greatest 4-string acoustic Modular Fiddle. V4 is the…
For handing your Milwaukee Quik-Lok string trimmer head. Print at .15-.2 mm and mount to wall.
A Star Wars String Artwork. Print at 0.3mm layer height without supports. Set wall generator to Arachne if using Bambu Studio)
NOTE: The STL of this model is free for non-commercial use - you are free to print as many as you want for yourself or friends, so long as there is no monetary exchange. Feel free to use this model as a basis for remixes to make grips of…
Updated to change print orientation along the diagonal axis and extend diagonal brace into holder cup for greater strength. Can also be printed along top axis with some support. Also fits EGO Power+ Powerhead PH1400 Printed 0.4 nozzle, 4…
Printed on my MK3S with a 0.4mm nozzle. I used the 0.3mm draft profile, the only changes I made were to check ‘detect thin walls’ and to change ‘seam position’ to rear. If when you slice the vase with the above settings it says there are…
Have you ever accidentally pulled the drawstring out of your favorite pajama pants? Trying to push a floppy string back through a long fabric channel just so you can keep your pajamas tight along your body can be incredibly frustrating.…
String art featuring an Icelandic horse. Print at 0.3mm layer height without supports. If you are using Prusaslicer check the 'detect thin walls' box and make sure the 'wipe while retracting' is unchecked in your printer settings.…
VANOCE | String Art Flat Ball, Christmas Tree The flat string art ball from my collection of Christmas Tree decorations . It prints 100% without supports , despite the strings floating in mid-air. Just make sure to check the recommended…
Circle String Art Print at 0.3mm layer height. If you are using Bambu Studio set wall generator to Arachne You should be able to see the strings in your slicer preview
MODEL DETAILS This Valentine's Day-themed model doubles as a stress test for your 3D Printer. If you liked this model, why not try our other stress tests too? Warning: This is meant to be extremely difficult. Keep an eye on your printer…
Guitar string winder tool. fit with bearing 608 without any tools. Manivelle pour mécanique de guitare se monte avec un roulement 608 sans aucun outil.
A twisty string decorative vase Print at 0.3mm layer height without supports If using Bambu Studio check that wall generator is set to Arachne.
S.I.M.P. is a fully 3d printable Half Dart stringer pistol with an internal magazine that requires no extra hardware other than the elastic string. This Blasters fps will depend on the elastic put in it but it should have the fps as a…
I've messed around with a new cad/modelling software and just ended up with a pistol somehow… Hardware needed: A bit of 4mm bungee and maybe some tape for the bungee where it interfaces with the lever to avoid too much flex Assembly, put…
*** Updated version with additional bracing for stability *** I had good success with my steel string guitar , but it required a huge printer. For folks wanting a more manageably sized project, I decided to try a mandolin instead. The…
Improves grip on string launcher handle. Can pull the loop or just hold as normal with some more surface area. Snaps on and off if needed. Let me know your thoughts or suggestions!
Beads for hoodie strings with Celtic symbols and a 5mm hole for the string to thread through. I printed them in black PLA and then used metallic Sharpie pens to colour the top and bottom. A small tree support was used for the top of the…
A small but effective Stringing test
J'ai eu besoin de changer toutes les cordes de ma guitare, et je me suis dit que c'était le moment de dessiner ma propre Manivelle pour tendre les cordes de guitare. Je me suis inspiré d'un modèle Dunlop adapté à mon besoin. Il ne…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Hardware requirement: #4 x 0.375in Thread-Forming Flat Head Screw, QTY 9 Two sections of 4mm elastic string Talon Magazine spring Secure the Magholder with one #4…
INFO: Instructions available as a PDF in the attached files. -------------------------------------------------------------------------------------------------------------------------------- Hello hello Nerfers! The Silica-5 is a massive…
![Wireframe Christmas Tree [no supports] - Bridging and No stringing challenge](https://media.printables.com/media/prints/655442/images/5166896_79daec47-c56b-4714-a9fe-e8b3f3ae71c2_a6a220e6-3731-44b5-a6be-cbd25e714454/snimek-obrazovky-2023-11-22-022708.png)
