Search results: trow

Fugenglätter/ silicone trowel

Perfekt für Silikon Fugen glatt zu ziehen. Perfect for pulling silicone joints smooth.

Travis Scott Astroworld Head

Here is the Astroworld head, double-sided! I printed this head both times using “everywhere” supports in PrusaSlicer. It was very difficult to remove the support material without damaging the pieces of Travis's hair, so I recommend…

travis scott astroworld head

travis scott astroworld head

Drywall corner trowel

Rohová špachtle na sádrokarton

Silicone trowel / Silikonabzieher

Hello, i always have trouble to create nice silicone joints and startet to look for some handy tools. I saw some good tools in wood, but they were very expensive (4€ each size). Good we have 3D printers, so i designed some and tested…

Fliesenkelle, Zahnspachtel | Tile trowel, notched trowel

Einfache Fliesenkelle/Zahnspachtel falls man mal ein paar Fliesen verlegen möchte und seine vorhandene gerade nicht findet oder man gar keine besitzt. Abstand der Zähne 3mm, auf Anfrage kann ich auch Variationen davon hochladen.…

Gardening trowel

Should be useful in planting and potting. Print instructions Print with supports for better inner surface.

Gardening Tool Set-Shovel,Rake,Trowel

This is a super garden tool set - your key to effortless gardening! With three adjustable, print-in-place digging tools, you can now cultivate and nourish your garden with ease. No supports needed, just simple printing. Enjoy your time in…

Hiking Trowel

I needed a new trowel for a long hike, but unfortunately my local outfitter only had expensive trowels in stock. I designed this with hiking/backpacking in mind-- the trowel is lightweight, comfortable to use digging small holes, and can…

Hand Spade / Trowel

I wanted to test my skill at making usable tools, and have created this. This design needs minimal supports, with them only needed under the handle. I used a 25% infill, and it feels nice and strong so I dont see a need to go too much…

Concrete edge trowel rounded

Just a modified version on DGA's model.

Outer corner trowel, fast, cheap and sturdy

Needed a outer corner trowel for my garage isolation project. Couldn't find anything that would fit my needs, so I created this. No supports Quick print (around 2 hours) Can be easily printed in .28 layer height to reduce print time…

Camp Trowel & Scooper

Ultralight-ish backpacking/camping trowel. Weighs in at 70 grams of material. This is considered V1, will put it through its paces and see where i can shave off some weight, while keeping it robust enough to dig catholes. 3MF file…

Glue Trowel

you know you have no life, when on a Friday night you stay in a design a glue trowel for work LOL XD updated to v2, has thinner teeth to get into corners better Category: 3D Printing

Roblox Trowel (500 DOWNLOADS SPECIAL!!!)

Epoxy Trowel

When floating epoxy coat on a table top its hard to get the perfect thickness. The epoxy will self level but to get it really good you need to have a pretty constant thickness. I found some epoxy trowels online but they were only a few…

Garden Trowel

Garden Trowel

simple and strong plastering trowel

simple and strong plastering trowel

Multi-Notch Resin Spreader / Trowel

A simple 100mm (4"), flat, flexible resin spreader with one flat edge and three notched edges with notch sizes approximately 3.3mm (1/8″) 5mm (3/16″), 6.7mm (1/4″). It's a lot like the similar looking spreaders that you can buy for a few…

Trowing Knives

Good quality throwing knives mainly for adults. Please leave reports and problem so we can all help each other out, Than

Corner Trowel with angle adjustment

Exact angle trowel adjusts to suit the task you are working on from 90 to 160 degrees. Thank you for every review, like and donation, It motivates and helps to implement new projects! Print Settings Rafts: No Supports: No Resolution: 0,2…

Corner Trowel

I printed this at 0.2mm layer height without any supports. Had to fix the corners on the printer cabinet I'm building with joint compound. This print gave me the perfect rounded corners!

Masonic Trowel

Model of a Masonic Trowel.

Garden Trowel No Supports Required

A very simple garden trowel that can be printed without any support and joined without glue. Light sanding may be required on the base grip's top surface depending on how accurately it is printed. The dovetail joint does the trick to join…

Concrete hand float and trowels variety pack

Printed in PETG, the float uses KREG square drive screws for mounting the handle, printed on a glass bed for a smooth finish. The trowel's are modified versions of DGA's hand trowel. I added tapers to both ends and made one with a sharper…

Trowel

No supports need If you use ABS it works well

Gardening trowel - cyberpunk version

Super cool and modern cyber version of the simple gardening trovel. You still didn't print one?

Optical Illusion Box - Jastrow

A simple box inspired by the Jastrow illusion ( https://en.wikipedia.org/wiki/Jastrow_illusion ). What better way to experience an optical illusion than by having a tangible object to manipulate? I printed the lids without the first and…

Notched trowel

I did some decor tiles in the room. To apply the bond evenly, I needed a tile scraper. I could buy them and use them, but I have a 3D printer so I'll have to make them. It was modeled to be approximately 4 inches by 6 inches in size.

Backpacking Trowel

Small lightweight backpacking trowel with teeth on one side and a slot for a clip.

Ultralight Camping Trowel and Pick

I designed this with a minimalist vision in mind. The holes reduce weight slightly and allow for clipping or cord usage as you like. The asymmetrical design leaves one side smoother for comfort, while the other is hooked for light-duty…

Number 2 Ounce Trowel

In order to protect our wilderness, human waste should be deposited in catholes dug 6-8 inches deep at least 200 feet from water, camp, and trails. This is difficult to do with sticks or hands, so I recommend this trowel. Due to it's…

Surveyor's trowel

This is a tool for surveyors and other people who have to dig out pits, services and similar small holes in the ground. Can also be used as an enormous ice-cream scoop. :P

mini trowel hubba ledge

measures 3 inches tall 10 inches long and 2 inches wide.

Concrete Curb Shaper/Trowel

The model is not very beautiful designed, but well, it has to be functional, not beautiful. I haven't tried it myself, its for a friend, if i know that it works, ill write it here. But until then: Printing at your own risk hahaha. If the…

Notched trowel || Zahnspachtel

175mm notched trowel for large format tiles, with hook 8*8mm spacing 3-4 Top / Bottom Layers 3-4 Perimeters

Fugenglätter, Silicone Trowel

A simple model for smoothing silicone joints . Average print time: 17 min. No supports

silicone trowel / Silikon Glätter / different sizes

silicone trowel / Silikon Glätter / different sizes → Sizes ca. 6mm | 8mm | 10mm | 12mm → 0.4 Nozzle → 0.2 mm Layer Height → 30% infill → TPU → Cleaning →water | paper | toothstick | dish soap → it's not a silver bullet, but it helps to…

Square Notch Glue Spreader/Trowel

1.2mm thick. Notches are 2mm 3mm 6mm and 6x3mm. Enjoy 8mm hole for hanging.

Glättekelle, Zahnkelle, Zahnspachtel, Notch Trowel

Für eine kleine Fläche Fliesen wollte ich keine Zahnkelle/Glättekelle kaufen. Gedrucktes Modell war erfolgreich im Einsatz. Habe verschiedene Varianten mit unterschiedlicher Zahnung hochgeladen. ----------------------------------- I…

Concrete edge trowel sharp

I modified DGA's model and gave it tapered ends and a harder edge.

Cap for Vargo Dig Dig Trowel

This is a cap specifically designed for the Vargo Dig Dig Titanium trowel. This trowel (as is the case with most titanium backpacking trowels) can be a bit rough on your palms, especially when digging hard or rocky ground. This cap slips…

Survival Trowel

A very sharp digging implement.

Small Trowel (no supports)

This is a small hand trowel that prints without supports. Works well for digging small holes and is very lightweight. I printed it in PETG at 0.1mm layer height on a Prusa i3 Mk3 and it came out nicely. I did sand it a bit to make it nice…

Vzduchovka / Wiatrowka / Air gun wall holder

Ceramic tools ( Tile spacers and trowels )

THIS IS STILL A WORK IN PROGRESS, ITS NOT FINISHED YET!!

Trowel/spreader

Spatula handle/ trowel or spreader i don't know what's it called, but here it is. Hight. 100mm Wide. 150mm Thooth. 2mm

135° Drywall trowel/tool for knee walls

If you are adding a 45-degree knee-wall, but still need a tool to help with mudding/taping, you can print this one. Hold it flat to fit the 135 degree angle perfectly. Hold at an angle to use the edges independently. I printed mine with…

Notched trowel 3m adhesive scraper

a 3mm notched trowel / scraper for spreading applying adhesive

Gardening Tool - Mini Trowel and Fork for Seedlings

Styled on the cheap tools you can get from supermarkets, but this costs about 13p to print and if you break it you just print another :o) Works fine for separating out young seedlings for potting on or planting out in the garden. I used…

Cat Litter Scoop Trowel Holder v.2

I have adapted the idea of SIMBAKATZE to my needs. I had to be able to use double-sided tape to attach it. Thanks Revision 2 Improvement: Better fit between body and wall mount Better cleaning with rounded inside corners Category: Other

HDHomeRun Quatro & 4k QuatroWall Mount

Wall mount for the HDHomeRun Quatro & 4k Quatro. I use Spax #6x5/8" screws for mounting. Print instructions .2mm layer height, 15% gyroid infil

2 in x 3 in Notched Trowel for Tile

Square notches in 1/8" and 3/6" on the 2" sides and optionally ¼" notch on the 3" side.

Splatula / Trowel

Flexible spatula for cleaning and treatment of plaster and stucco. Print on PETG with 5 perimeters, 15% infill, Gyroid recommended.

JOINT TROWEL-SET

Joint spatula set for silicone and acrylic. Set of square and round pullers. Works great with TPU.

Cat Litter Scoop Trowel Holder v.3

Review, added bag holder Category: Pets

Trowel Van Mount (For All Sized Trowels)

This is a mount for all sized trowels. 10% - 15% infill. countersunk holes for screws.

3D Printable Archaeology Trowel (Remixed from Photogrammetry Scan, Two-Part Print)

I was looking for an archaeological trowel to 3D print as a toy , but I could not find any printable models. While searching, I came across a detailed photogrammetry model of a real archaeology trowel , so I decided to adapt it to make it…

Linoleum Flooring Adhesive Trowel

I am rebuilding the bathroom in my camp trailer and don’t own a trowel for spreading flooring adhesive so I designed a printable (and disposable) model. Given that it was going to be thrown away I wasn’t worried about it being rather…

Camping Trowel - Short Handle

A small camping trowel with a short handle for backpacking

Cement trowel

A simple trowel for smoothing and shaping cement.

Drywall Inside Corner Trowel, Hole Repair, View Hole Cover

Drywall Inside Corner Trowel, Hole Repair, View Hole Cover

Sand Trowel

I made this trowel for building sandcastles on the beach. The STL is for my hand size, reduce the scale for children or people with smaller hands. I printed 75% scale for my 7 year old son. I paused the print and changed filaments to get…

Jastrow Illusion Bowls

A classic illusion: Print two of these bowls and put them next to each other. It will look as if the top one is much larger. Then you switch positions and the other bowl, now on top, appears to be larger. Magic!

Top Coat trowel tool for Epoxy River Table

This is a notched trowel for the final hard coat of an epoxy table. Made with 1/8" x 1/8" grooves for a smooth and level finish coat. I couldn't find one out in town made of a softer material (don't want a metal one that might leave…

RetroWave OPL3 Express Shell

3D printable shell for the RetroWave OPL3 Express with a volume knob

Concrete Trowel Stamp

This STL file is designed to create a custom concrete trowel stamp, perfect for adding unique branding or decorative designs to concrete surfaces. The file includes a fully functional base trowel stamp template, allowing you to easily add…

Concrete Edging Trowel 0.25" Radius

Incorporated feedback from other designs here. Will have to glue handle to top or drill your own screws. It's a 0.25" radius. 1.8" wide, 4" long. Edger side is about 1" deep. Leading edges on both sides are 1/8" chamfer. How I Designed…

LEGO Speed Champions Lamborghini Countach Retrowave Wall Mount

This is a wall mount to display your LEGO Speed Champions Lamborghini Countach. There is a “FULL MODEL” that should be printed at a .3mm layer height and has a color change every 3 layers. See screen shot on how to print for multicolor…

nozzle trower of antwerp belgium

This model is base on the statue on the “ grote markt" in Antwerp. The statue is based on a myth of brabo who cuts of the hand of a giant who did block the “Schelde”. Some times we all want to trow away a nozzles/ 3d printer because a…

sorbian easter egg - jutrowne jejko

Deutsch: Herzlichen Dank das Sie das sorbische Osterei gedruckt haben. Zusammenbau: Zum Zusammenbau kleben Sie die zwei Hälften einfach zusammen. Bitte beachten Sie die korekkte Ausrichtung. Richtig: Falsch: Bitte laden Sie Makes und…

9mm U-Notch Trim Trowel

This is a 9mm U-notch trowel that I designed for tile trim. It is the equivalent of a 1/4 x 3/8 notch trowel and leaves about a 3/16 (4.76mm) bed of thinset. Here is the A360 downloadable file if you want to customize it to make your own…

Retrowave Sun Art

Retrowave Sun Art for your wall or desk

TPU Grip Cushion / Hand Protector - Naceture Ultralight Backpacking Trowel

This does what it looks like it does. Fits Naceture Trowel (#1 on Amazon) https://www.amazon.com/gp/product/B09D9RZ71H/ref=ewc_pr_img_1?smid=A31CDLOEH2EGX3&th=1 Features comfortable roll-top end and nubbin detent what for keeping it…

A simple replacement trowser button

After a large lunch I realised my trouser button had done a runner. So, a quick design in TinkerCad, 10 minutes of printing and a needle and cotton and I was good to go. No more holding my trousers with one hand and paying for the lunch…

Ergonomic 3D Printed Garden Trowel | Lightweight Hand Gardening Tool

I designed this garden trowel for everyday gardening and potting tasks. It features an ergonomic handle for a comfortable and secure grip. The lightweight design makes it easy to use for digging and planting. The model is 3D printable,…

Trowel Holster

The trowel holsters were designed to hold multiple trowels. Version 3 can be used with a belt but also has a hole that can be used with a carabiner instead. Version 4 only has a carabiner loop. I used TPU, but due to the height of the…

RetroWave 98 — Case Retro para Framework Laptop 12 Mainboard

RetroWave 98 Case inspirado en las computadoras retro de los 90, diseñado para darle una segunda vida a la Framework Laptop 12 Mainboard . Características: Sujeción segura mediante los 4 puntos de montaje captive de la mainboard Los 4…

Backpacking Trowel Palm Protector

This cap fits over the top of a backpacking trowel to protect your palm from sharp edges. Credit for the idea goes to https://www.printables.com/model/510991-lixada-camping-shovel-hand-protector This model is original, designed to fit the…

notched trowel

A mini trowel I modeled for putting in a tile backsplash.

Nescafe 200ml Glas Trowel and Tamper

Kelle um in dem Glas ganz unten an das Pulver zu gelangen und Tamper fuer Nespresso Caps Wiederbefüllbare Nespresso Kaffeekapsel aus Edelstahl zum Nachfüllen - Wiederverwendbare Refill-Kapsel für umweltbewusste Kaffee-Liebhaber kompatibel…

Hřebínek na obklady/Notched trowel for tiling

Potřeboval jsem rychle obložit kus zdi a nebyl čas shánět všechno potřebné vybavení v obchodě. Tak jsem si hřebínek na obklady navrhl a vytiskl. Průměr i výška zubu 5 mm. Na takové to domácí žvýkání celkem v pohodě. [ENGLISH] I needed to…

Maurer Kelle Brick Trowel

Eine Maurer Kelle für den Feuerungsbau. Noch nicht getestet. Würde ASA oder ABS zum drucken empfehlen.

Case for Retrowave OPL3 Express

Tool-less case/enclosure for the niche Retrowave OPL3 Express card. Photos depict the case printed in multi-color PLA Matte (Bambu Labs filament on a Bambu Labs P1S) without supports or prints. The logo and top case were centered (the…

Retrowave LED Sun

Hi all, This is my first ever model, and I had to learn Fusion 360 to create it….. so be kind, there's bound to be mistakes, but it works. As an 80s child, and fan of all things 80s and retro, I wanted to try to recreate a Retrowave Sun…

Mini plastering trowel

A mini plastering trowel can be used in modeling for applying, spreading, and smoothing materials like putty, filler, or

Edge Trowel

I needed to repair some stairs but, since I don't plan on doing it ever again, I didn't want to buy an edge trowel. So I designed and printed one. It worked great.

Sandbox Trowel

A sandbox trowel I've been iterating on for my kid. It's been getting regular use at the playground with a range of kids (aged 1-6yo) and durable enough so far. The overhangs are set so it can be printed without support on MK4S with only…

Trowel Box

It is 2 pieces that should fit on a 3d printer with a print bed at least 8"x8". You will need to split the file inside of your slicer. The blade attaches to the base using 3 M6 screws. The ones I used were 16mm long. There are hexagonal…

Astrowl astrophotography camera carry case

Hard case with soft TPU liner for the Astrowl astrophotography camera off Cloudynights.

Double Ended Thermal and Solder Paste Spreading Trowel

Double-ended trowel used to spreading thermal or solder paste onto either a PCB. PCB Stencil or a CPU. Two separate files one with the label of our website and a second unlabeled one. Dimensions: 122mm x 24mm x 5mm

Small trowel for plaster lists

I have created a small trowel designed to ensure a precise distance between the bottom of the tile and the surface of the plaster (eg https://www.pinterest.it/pin/21532904457891450/ ). This tool ensures a uniform and leveled plaster…

Narrow 8mm Notched Trowel

Needed a narrow trowel for adding thin tiles along the edge of the floor. Standard notched trowel was too large to fit 8x8mm notches 72mm wide Printed in PETG

Outer Corner Trowel Drywall

Features: Ergonomic Handle: Comfortable grip designed for steady single-handed passes. Precise $90 Angle: Formed specifically for smoothing external wall corners without sagging or distortion. Functional DIY Design: Perfect for quick home…

Garden Trowel Handle

The example was printed in PET-G. You can use a socket head bolt and nut to hold the metal part in place.

Strowler grip extension

Im a tall guy, so i needed a Strowler grip extension

Dirt trowel

A trowel to make levelling the soil in your microgreen trays. The trowel has two dowels the fit into holes located at the bottom. The dowels in the file can be sized to the height you require by simply changing the z height in the slicer.…

Sportstech WRX700 modification for SmartRow Waterrower

DISCLAIMER: This modification includes sawing a part of your Sportstech WRX700 in half. I won't take any responsibility if you screw that up. However, if I have time for it, I would help you find a solution. BOM: The 2 printed parts 4x M3…

гладилка для бетона-concrete trowel

3D‑модель для работы с бетоном (concrete trowel), мастерком или гладилкой для бетона.

The Jastrow illusion

How It Works Two identical curved placards sit close together. One shape's short inner edge touches the other shape's long outer edge. The brain compares the touching edges instead of the whole shape. The short edge makes the neighboring…