Counting matching models…
Reinigungskorb für Ultrasonic Cleaner. Druckt etwas langsamer: Sieb mit Honeycomb Waben, dafür aber mehr Siebfläche als mit runden Löchern. Filament: PETG Flashforce PETG white
Dieser hochwertig 3D-gedruckte Sensorhalter wurde speziell für den HC-SR04 Ultraschallsensor entwickelt und sorgt für eine sichere, stabile und passgenaue Befestigung in deinen DIY- und Elektronikprojekten. Ideal geeignet für den Einsatz…
There are plenty of displays out there, but almost all of them are designed to showcase objects that have a relatively flat bottom, such as a phone or a tablet and hence will stay put even when it gets slightly perturbed. However, these…
Simple holder for floor brush and extension tube. Print instructions ============== Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20% ==============
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . WARNING: This is a dog whistle and not a toy! It's very loud which can harm the ears, so please protect your ears and don't use it…
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . After a lot…
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . WARNING:…
Print settings (example) Raft or Brim: None Supports: No Layer height: 0.2 mm Infill: 100 % Screw hole is 4mm diameter.
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . WARNING:…
Currently refining a small obstacle avoiding mecanum robot for an introductory robotics club and needed a simple mount for a servo driven ultrasonic sensor. This design is a single piece print with no supports that printed quickly in PLA+…
Just added the smile like on the original design https://www.thingiverse.com/thing:1364024 :-) Fits perfectly Ultrasonic HC-SR04 sensor and standard servo mount Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2…
Ultrasonic Sensor Holder for arduino
This is the case for HC-SR04 ultrasonic sensor (RED VERSION). The blue one has diffrent dimensions and is not compatible with this case. Print Settings Rafts: No Supports: No Filament: Doesn't matter Category: DIY
Remix of "Ultrasonic Sensor Housing" by Ivanchew to fit an RCW-0001 sensor instead of the original SR-04 sensor. If you don't know, the RCW-0001 is a 3.3V ultrasonic sensor which is ideal to use with an ESP8266 :) Onshape model can be…
Print with 20% infill After printing, the case is ready to slide onto the transmitter and receiver on the HC-SR04.
I just flattened the foot and added a groove for a servo mount instead at the bottom. A great tutorial on how to make a arduino radar can be found here: http://howtomechatronics.com/projects/arduino-radar-project/ Category: Engineering
Arduino compatible Ultrasonic sensor Buy the HC-SR04 Sensor HERE
5° tiltet holder to correct the tilt of the sensor
I've had a cheap water atomising module for a long time that has not been used for any purpose yet, so I decided to design a DIY humidifier set. It can be used both with and without a PET bottle. The model is pretty small (only 11 x 6.5 x…
For when the 1.2L 3d case isn't small enough. Important information and disclaimer (read): It only works with Deskmini x300 and the ID-Cooling IS-30. It will not be compatible with anything else. The IS-30 is not perfectly compatible with…
Use M3 screw for installing
This is a housing for a NoceMCU v3 and an HC-SR04 ultrasonic distance sensor. The lid will stay on when held upside down, but it's easy to remove. I designed this together with my son as an introduction to 3D modeling. Print Settings…
Edit: Added full basket 9/9/2020 lhas not been printed, drop me a message if it's good. I goofed up my parts basket so I made a new one for my Harbor Freight Ultrasonic Cleaner. Part shown in use about 18:00 into the video. Fusion360…
its just another holder for HC SR04 Category: Electronics
This is a printable design to mount the HC-SR04 ultrasonics sensor to the Micro SG-90 To make this design work you'll need four small screws (or two - for each opposing corner) to mount the ultrasonics sensor to the print. And you'll need…
a toy ultrasound probe for medical professionals to use while explaining procedures to kids. also for use a a toy in order to normalize medical procedures so kids are more comfortable in the medical environment. THIS IS A TOY MODEL ONLY;…
These are realistic models of ultrasound probes commonly used in the emergency department for bedside ultrasound. They’re an excellent way for students to become familiar with probe handling before using the real (and expensive)…
I recommend printing with 0.4mm nozzle at slow speeds(15mm/s) without supports. The piezo element should be placed with wire first trough the hole at the top, and the piezo should be inserted diagonally then press fitted in place and wick…
This is a set of mounts you can print to hold your HC-SR04 Sonar Range Finder in the front (or back) of an Arduino Smart Car. The images show how to mount it. Please note that the three of them have different mount shapes to match the…
IMPORTANT NOTE: This is the first published version of the ongoing ULTRASOFT project. The aim is to replicate as many of the weapons from the videogame Ultrakill as possible in a way that allows for their use in airsoft matches. The…
purpose this mount offers rugged angular adjustment even on rocking platforms for sensors AJ-SR04M / JSN-SR04T, used in many arduino/raspi-zero etc projects. material if you platform is used in direct sunlight, don't use PLA, as it will…
This is my latest attempt to get the HC-SR04 to measure reliably the water level in a tank. Previous attempts with the waterproof JSN-SR4T ended in erratic results due to multiple reflections from the tank walls especially at low water…
Description This case is designed to house a Wemos D1 Mini and a JSN-SR04T ultrasonic distance sensor. It’s ideal for use with ESPHome and Home Assistant to measure distances, such as monitoring the level in a water tank. Design Overview…
** Update 2024-01-08 ** I've added a larger version of the model that can accommodate phones with a case. This has been tested with an iPhone 13 Pro + case and it works well. See file: dell-monitor-phone-mount-lrg.stl or…
With this mount you can mount an Ultrasonic Sensor module on to a Stepper motor with a 3mm*5mm shaft.
This is concept of cheap 3D scanner with lidar ( http://www.benewake.com/en/tfmini.html ). I use Arduino Nano with CNC shield + A4988 driver for stepper motor. Scanner write position (x,y,z) to SD card. buttons for home H(orizontal), for…
This mount is used for mounting JSN-SR04T water level ultrasonic sensor on top of the IBC lid.
This 3-part 3D printable housing system allows you to install an ESP32 and HC-SR04 sensor into a waterproof container or tank lid for use as a smart fill level sensor. It’s perfect for home automation projects using ESPHome and Home…
[EN] Multi-colour ultrasound photo frame adapted for printing without MMU by changing filament layer by layer (M600 or by hand). The model is adapted for printing with a layer height of 0.2mm (then 3 layers per colour which is enough to…
Hello! This is my first robotic project, so keep in mind it's not perfect and is created especially for beginners. Also please keep in mind you will need some soldering skills for this project and the assembly won't take a few minutes.…
Summary Ultrasonic vinyl record cleaner: For cleaning 33 rpm vinyl records in a 6L ultrasonic cleaner tank.…
This is a case/mount for a arduino ultrasonic sensor.
This is a case for the HC-SR04 ultrasonic sensor. I made it especially for outdoor use because I need a sensor for measuring the water level of water tanks. The sensor cable can be fixed with a cable gland (M12). If you fill the case with…
This supports are designed to hold the HC-SR04 ultrasonic sensors to the wall. It is ideal for monitoring the level of your tnaks or your wells. The two pieces are holded together with two screws and the cable of the sensors passes…
Made with PTEG at 15% infill. Ultrasonic jewelry cleaner bath water is slimy. This will keep your rings in one place and easy to retrieve when cleaning cycle is finished. No wet, slimy fingers and rings don't bounce around on the bottom…
an open robotics platform ( https://openroboticplatform.com/ ) compatible holder for the HC-SR04 ultrasonic sensor. attaches with 2 M3 flatheaded screws (height of the head of the screw should be around 2mm). sensor is easy to mount,…
Print without supports - it should be fine
DA-968 is a cheap Chinese ultrasonic cleaner, but it comes without basket. So, to avoid metal objects to be in contact with the container and permanent damages, I made a little basket to fit in the container. Designed such that it doesn't…
The original model by @Jurgols was too small of a tube for the cotton tubes to fit so i modified his model to make it work. Also I designed multiple different connectors (2x2, 4x1, 3x1, 2x1) to connect multiple holders together. Also for…
I printed in 0.2 mm nozzle on a p1p with a basic autogenerated tree support
Ultrasound wand meant as a medical play toy for education and normalization for patients in the medical setting. Not intended for any real medical needs.
This model is made for LED metal atomizer I found on Aliexpress with 46mm base diameter (see attached images). Other atomizers can have different dimensions and may not fit. For best results, use transparent PETG. Enjoy :)
Pointed at 10 degree angle, to look down at stuff
The Flextail Zero comes with a pile of adapters for various sleep mats. But, there is no adapter for the Rab Ultrasphere sleep mat. Now there is one! Printed in TPU with 0.2mm quality, it weights in at only 4g.
Arduino Ultrasonic sensor adaptor. 2 models: Generic and DFRobot module
This JSN-SR04T Ultrasonic Sensor Lid Insert is designed for use with IBC water tanks. It's an easy way to install an ultrasonic sensor to measure water levels accurately.
Case for ultrasonic RCWL-1670
A bracket to hold an ultrasonic sonar sensor to a stepper motor. Category: 3D Printing
This is a little stand for a phone or a device of your choosing that will use 2 Ultrasonic Sensors to try and follow you. It is inspired by this project:…
Tired of refilling or overfilling your halloween fogger? Then this is the print for you! Introducing my innovative Automatic Water Filler designed specifically for ultrasonic misters and foggers! This practical device automatically keeps…
Rámeček na fotku z ultrazvuku- ve stylu těhotné ženy
Ultrasonic Sensor HC-SR04.STL
This is a case for the Qwiic Ultrasound Sensor https://www.sparkfun.com/products/17777 that can be mounted from behind. It also works with the identical (apart from colour) Zio Ultrasound Distance Detector…
This is was designed to connect a Ultrasonic Sensor to a Servo Motor with a blade. Specifically a HC-SR04 Ultrasonic Sensor and SG90 Servo Motor. The original connecter broke so I designed a stronger one. The tank and electronics is from…
Thanks to Marugg for the Electrolux end: https://www.thingiverse.com/thing:4156831
A mount for distance sensor based on SR04T such as this one: Tested on this version: https://www.amazon.fr/Youmile-Capteur-Distance-Ultrasonique-JSN-SR04T/dp/B07YDG53MC Here is a end-to-end howto:…
Threaded cone for ultrasonic distance sensors. Thread diameter: 28 Thread pitch: 2mm Heigth: 66mm Outer diameter: 44mm Inner diameter: 21.8mm Category: Parts
The blade holder when printed was loose on my Ultrasaber 24" blade so much there was a gap around the blade and the emitter would not tighten against the blade. I modified the original Blade_Holder STL as well as the Blade_Holder (Short)…
Measure distances from your smartphone! Full assembly instructions on PCBway: https://www.pcbway.com/project/shareproje
The US-025A is an ultrasonic sensor like the SR04, yet it can work at 3.3V, so suitable for ESP32 & ESP8266. This design includes the sensor (to allow the holes in the carrier), and a carrier for the US-025A, with also suitable to connect…
Recommended for tower print is stone or concrete-textured filament. For inner parts, I used phosphorescent material for a stunning glow effect in the dark. Additional ultrasonic atomizer (mist generator) is required for printing, such as…
I extended up the sides of my Harbor Freight basket and it turned out so nice my wife put fruit in it. It was printed in PETG which may be food safe and it is quite strong. I did a diamond shape on the sides so only the handle area's will…
I made this for one of my projects, so I designed it specifically for Grover ultrasonic V2. Prints Without Any support, you will need M3 screws to attach it to the base. If you need it with a different configuration ping me, I would be…
This is a series of drainage accessories designed for the CO-Z 6L ultrasonic cleaner, but I'm sure it would fit any other of the cheap ultrasonic cleaners that look like the one sold by CO-Z. They're all designed to print on the plate of…
Es handelt sich um die gängigsten Ultraschallköpfe für Trainings und Simulationen. Genutzt für medizinische Trainings und Simulationen, wie dem Schockraumtraining. In das Loch kann ein Band oder eine Schnur geklebt werden. Drucken am…
This is a recreation of the part that comes with those cheap ultrasonic cold fog humidifier modules. The ones that came with mine are soluble in chloroform so they couldn't be used in my pla vapor smoothing setup. Print in petg and you…
This is a custom-designed scanning mount for the HC-SR04 Ultrasonic Distance Sensor , specifically engineered for obstacle-avoiding robots and Arduino projects. The design consists of two parts: Servo Base: A cylindrical housing designed…
A bracket for the US-100 Ultrasonic Distance Sensor. It is designed for mounting on an 80020 Series 10 extrusion but can be used standalone on a desktop. The holes are 1/4-20. Print instructions Unassociated tags: Distance Sensor,…
Este modelo que hice fue para mejorar la eficiencia del soporte, sacandole relleno del medio y poniendoselo en lo ancho para que sea mas resistente y no se rompa
This design is an enclosure for an UltraStik analog joystick so it can be used either as a USB joystick or mouse. This joystick can help people that cannot use a traditional mouse or a traditional gaming controller. It can be plugged…
English: Introducing the UltraSlim IceScraper - the ultimate solution for those unexpected frosty moments. This credit-card-sized ice scraper is designed to slide seamlessly into your wallet, ensuring you're always equipped to handle icy…
For my first robot project I want to use the URM37 ultrasonic distance sensor from dfrobot. So the first thing to do was to design a good housing for the sensor and make it attachable to a servo. Category: Robotics
hc-sr04 sensor compatible with an arduino It's easy to attach the model to a contruction with bolt and nut or screws. No specefic printing instruction needed.
This is a mounting bracket that holds a JSN-SR04T ultrasonic sensor and waterproof DS18B20 temperature sensor for mounting to a 1" square tube. This is part of a project to measure the water level of a creek. The sensor will be extended…
You need 12V DC 5RPM motor https://www.amazon.de/gp/product/B0752T2WHC/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 PWM speed controller…
Wanted to measure my oil level so went looking for a solution. I found this ( https://www.thingiverse.com/thing:2775608 ) which after reading the description pointed me in the right direction so I followed those instructions to make one…
A cute Alien design for an ultrasonic sensor (HCSR04) enclosure. It's a snap-fit box and doesn't need any screw..
Can be printed from pretty much any material. I used PET-G, but it was not the best choice due to the stringing in the holes.
This is a remix of a parabolic reflector in which I modified the receiver holder mount to accept an ultrasonic ~16 mm diameter receiver. Used Cyanoacrylate glue (Krazy Glue) to glue the 2 halves and hot-glue to secure the receiver to the…
My webcam hang into the screen area of my Dell Ultrasharp monitors as they have only a small frame. So i decided to design these small “spacers” to get rid of the “notch” of my displays.
20x20 aluminium profile HC-SR04 Ultrasonic Distance Sensor holder. Printing instructions: 0.2 speed profile. Supports active from the print bed. Happy printing =)
Why I needed a replacement for the Duct / Nozzle on the top of my TaoTronics-Ultrasonic-Cool-Mist-Humidifier . The Duct does not lock in place but just sits inside a pocket on the top of the humidifier. Because of this deign mine fell out…
A friend of mine bought an ultrasonic record cleaner for his vinyl collection but it only came with 4 spacers. after searching all over the internet he couldn't find any additional spacers without buying the whole cleaner again. So a long…
Hello and welcome, this model is designed to float on water and to provide optimal water delivery for up to 4 ultrasonic foggers (16/20mm ceramic piezeo). This can be used in a fogponic setup to grow e.g. different types of lettuce.…
A simple low profile 1/4-20 magnetic mount for a Dell Ultrasharp Webcam (WB7022). More information available here Category: Office
This is TS-FT002 holder suitable for inside of the retention tank. I recommend ABS, supports required only on build plate. When you will put TS-FT002 inside retention tank, ensure you at least coat the PCB eg. with nail polish, eg. like…
designed to put on my nespresso essenza mini lateral wall, taking as little space as possible. total height is 6mm. the back wall is 1.5mm high. you may "sink" the model 1mm into the hotbed, if you want it even thinner (that's what I did,…
