744 models
Interlocking storage drawer system that uses dove tails for the connectors. The set files have 4 of each piece To connect the handle to the drawer I recommend just using a drop of super glue.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
The scope mounts allow you to quickly and easily find the proper height. The mounts fit on an 11 mm dovetail and fit scopes with a tube diameter of 1" (25.4 mm). Have now added the mounts in 30 mm as well. The heights correspond to those…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
These saw guides are designed to help you cut accurate dovetails. Each jig includes all of the angles required to cut both the tails and the pins. You'll need some 8 mm diameter, 3 mm thick magnets (8 per jig), which get superglued into…
Print approx. €1.82–€2.22 excl. taxPreliminary estimate for PETGSource material: PET
Cute little containers with hinged lid and dovetail groove to combine them to a complete small part storage system. I designed this originally for my beloved girlfriends jewelry but discovered very quickly that these little containers…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
The design is sturdy and saves about 800 g compared to a metal version. The dovetail uses the Losmandy mount points (3'') of the Celestron AVX mount and has alignment stops for easier mounting at reproducible positions. The parts are…
Print approx. €3.30–€4.04 excl. taxPreliminary estimate for PETGSource material: PET
This model is inspired by the Dovetail Puzzles shown by Chris Ramsay . I love the impossible triangular dovetail design so I made it as a small box but left out the puzzel part. My take on this looks impossible but is much less impossible…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
This is a redesign of the dovetail connectors from ‘Gridfinity Master Collection.’ Based on the file name, and the owner of the collection, I believe credit is due to GlitchPrinter for the original idea here. These are slightly smaller…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Dovetail Gridfinity Base - Multiple Dovetail Options
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
This remix of the Prusa Core One dust filter offers a sturdier and more user-friendly solution for the vent openings. Improvements over the original design: Reinforced cover construction for better durability Increased clearance between…
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
I have printed two of them, one that fits in my mobile toolbox, the other in the drawer of my workbench. That way, those guides are always where I expect them to be, I know exactly how to position them on my work piece even without…
Print approx. €3.04–€3.72 excl. taxPreliminary estimate for PETGSource material: PET
This is a 15x15x40mm bubble level holder for Vixen-styled dovetail bars. And the hole pattern fits dovetail bars made by MoreBlue. p.s. A slim version V2 is added.
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
This is a mounting plate for the GMKtec NucBox5 mini PC. The mini PC has two M2 screw holes on the bottom, which I use to attach the plate. The plate itself provides two positions for M4 hexagon nuts, allowing it to be mounted with the…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
Big lithopane of St.Nikolina.Monastery Nimnik
Print approx. €14.07–€17.20 excl. taxPreliminary estimate for one variant
This is a top-side mounting plate/bracket for these 4 in. Stacking Tilt Bins from Harbor Freight . Two versions are offered: single dovetail mount: designed for 1 storage bin double dovetail mount: designed for a pair of connected storage…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
Small icon of St.Nikolina,monastery Nimnik
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
This model is based on Zack Freedman's Gridfinity and Kyle Warren's screw together adaption. My version uses a dovetail connection to connect individual modules into any configuration. A step file is included for modification and…
I designed this for my specific toolbox drawer (US General 44" top chest), and the specific pliers I own. It probably won't be perfect for you unless you happen to own exactly the same stuff. But I am sharing it anyways, because some…
This model is based on Zack Freedman's Gridfinity and Kyle Warren's screw together adaption. My version uses a dovetail connection to connect individual modules into any configuration. The connection is tight and requires a tool to gently…
At first, this piggy bank appears impossible to open, with a dovetail joint on all four sides. In reality, this is a simple box with two parallel dovetails, spanning the same direction as the coin slot. Print Instructions: Print both…
Thanks for checking out my model! You'll find all the details, instructions, and recommended print settings below. If you enjoy my designs and would like to support my work, feel free to buy me a coffee . I'd really appreciate it! Happy…
This is a simple dovetail joint with a snap fit connector. It is handy for connecting two pieces together. It isn't very useful by itself (except to admire how cool it is). But you can integrate it into other models. I am going to use it…
The Microjig Matchfit system is endlessly useful for custom jigs, storage, organization, etc, but the bits and knobs are on the expensive side. I modeled and tested a number of variations to land on these, which are fully compatible with…
I like to print without supports. But the hooks for Skadis where allways hard to place in way, the didn't need andy support. That's why I decided to print them on their own and mount them with a sort of dovetail. This is the download for…
Overview. Wavetable is a customizable, 3D printed speaker stand for your desktop. Adjustable for height, width, tilt angle and more. The cantilevered design allows you to partially reuse the negative space below your speaker. Despite the…
Organize screws, bolts, nuts, electronic components, and small hardware with these 3D‑printable modular drawers , designed to be stackable and connectable using a dovetail sliding system on all sides. The design is compact, sturdy, and…
A series of Dovetail Vises with several variants based off of Chris Borge's design. Includes a Short-Body and Standard-Body version and three sets of jaws: Flat, PCB, and Fractal. Bill of Materials and Assembly Instructions can be found…
After Watching Mr.Puzzles video on youtube and needing a money gift box for a friend I decided to make this seemingly Impossible Dovetail Puzzle Box and it worked really well and it is a really fun print. The "bottom V.2" has a much…
A simple design for an AM/PM pill organizer, with a hinged lid and each AM/PM day detachable via dovetail joints. Going on a 3-day trip? Just bring what you need. Recommend PLA, 0.1 or 0.2mm layers. 3+ walls, infill as desired. No…
Simple Dovetail Wall Hook with hidden screws Don't forget to- like share print and follow!
This is a perfect replica of the Dovetail System by Microjig. Here two types of Track Nuts bots need to be used with M5 Insert Brass Nuts and two kinds of track screws: one for M5 Bolts and the other one to be used with M5 Insert Brass…
22mm picatinny rail adapter to use in 11mm rail. Needs: 1x 20mm m3 screw 1x m3 nut
Remix of https://www.printables.com/model/42109-bike-wheel-truing-tool Redesigned wheel truing tool for bike with w dovetail between two main parts to eliminate a need for gluing parts together. Can be used to trim the front or rear…
Thanks for checking out my model! You'll find all the details, instructions, and recommended print settings below. If you enjoy my designs and would like to support my work, feel free to buy me a coffee . I'd really appreciate it! Happy…
Secure it with three 4-5mm grub screws. The CAD files are included.
This design can be incorporated into anything that requires to be attached to a dovetail-style NVG mount. Category: Sport & Outdoors
Standard Gridfinity with a dovetail connection detail. Minimalist with a twist. As with my other dovetail models, no tools or fasteners required. These have a small bump bar in them to “grip” the bin/tray inserted into them; friction fit,…
This is a set of dovetail pegs that can be used to mount other models to the IKEA Skadis pegboard system. Utilizing this system bypasses the awkward nature of Skadis pegs and allows both the pegs and the parent part to be printed in the…
A prototype 3d printed replacment slider for the Rhino " NVG mount to convert it to the Dovetail interface. V2 included with a reworked pocket for the nut, which holds the screw in place that secures the mount. This should prevent the nut…
This is a series of clamp pads for the Microjig MATCHFIT dovetail clamps. The green rendered pads are for the swivel end of the clamp. The blue rendered pads are designed for the dovetail end of the clamp. Simply invert the clamp and use…
Drawer to organize screws Gaveta para organizar tornillos
This clamp was designed for easy mounting of ASIAir onto a vixen dovetail clamp. You need to install a threaded insert onto the moving jaw for smooth movement (I used the ones from CNC Kitchen) and provide a ¼ - 20 long thumbscrew for…
Remodelled from https://www.thingiverse.com/thing:3728184 I found the original version a bit stabby and didn't work well with M6 hardware. Category: Tools
A headphone holder for the IKEA Skadis system that utilizes my dovetail system for the actual Skadis pegs. This system allows the parts to be printed with almost no support material needed.
I have a bunch of Jig making nuts, bolts, knobs that use ¼-20 size, and I wanted to use them with the Matchfit system. Remixed to allow use of the bolt heads and another for flat heads/T-bolts. UPDATE 02/24/25 - Reuploaded the STLs to fix…
This losmandy-style dovetail is intended to be mounted on top of a telescope for accessories like minipcs, dew heater controllers and power-distro. All threaded holes are M6x1 threading. This bar is intended ONLY for top mount use, do not…
Vixen-style universal dovetail plate (150mm long) for telescopes. Print upside down so you won't need supports. Center thread is ¼-20 UNC. Best to print with plenty of solid perimeters for strength.
This is taking SamHain07's dovtail style socket rail and slap in onto gridfinity 1x5 baseplate. I have included 1/4 and 3/8 sized socket holders.. I do not use 1/2 sized socket so can't test the fit for that size. If you use 1/2 sized…
Dovetail track pieces that can be used either with an M5 bolt or an M5 nut. These work well with MatchFit workbenches. I've included three sizes: 40mm, 50mm, 100mm Print with the narrow side down, no supports.
Remixed "Parametric customizable hand knob" (credit: cschwarz) to fit Hex Nut hardware specified by "Dovetail Track Nuts (MatchFit Style)" (credit: JAREDSMOOT) and further altered the knob to closely match original MatchFit hardware.…
This is a classic wood working trick. A dovetail is usually used to joint two pieces of wood together. This box is a "modern" printable version of it, print it and let your friends figure out how to open the box. For the locking mechanism…
The spacer prevents the PTFE tube from scratching the cover. However, as all the spacers I found were made of four individual parts or had to be glued, I created a version where you can attach two parts together with a dovetail and also…
Use this to attach two things to your telescope, such as a red dot finder and a finder scope, as pictured. Marked as a remix to link to the main project. Features Two dovetail slots hold your accessories steady side-by-side Uses the same…
Connector to add parts to dovetail void side of base modules.
Remix of https://www.thingiverse.com/thing:2886695 While the original large laptop stand was perfect for my large Dell 5501, I didn't like how the parts had to be glued together with little guidance. So I made the parts snap together…
This is as simple dovetail style joint that you can adapt to fit your models needs.
What up nerds, here's a plate to add an optic to your sweet Taurus G2/G2C/PT111, etc… It dovetails into the stock rear sight mount, and uses the original screw to make sure it doesn't slide out on ya. I have the spacing for a cheap…
This part was designed to replace a picture hanger and nail that my key hook hangs on. The hanger always pivoted when the weight wasn't balanced and was easy to knock off the nail. This design will fit snugly, fixing that issue. The…
Dovetail key inserts and knobs for CNC workholding, using M5 hex head bolts. Designed for grooves using a 1/2", 14° dovetail bit. I'm using 3/4" MDF but other material work better. Knobs use captive 5m nuts by pausing during print.…
Useful if you need to mount two accessories onto one dovetail saddle onto your telescope. https://a360.co/3a6fCNv fusion 360 model
This cupholder is intended to work with our wheelchair clamp found here: https://www.printables.com/model/877736-medline-and-universal-wheelchair-clamp-for-cuphold This cupholder has a dovetail insert that can easily be added to or…
Print the model as oriented in the STL. You will need 2x M3 x 6mm screws to attach the mount to the computer.
Do you like castles? I love them. I like them so much, I decided I wanted to make a set of tiny little 3D castle parts so that I can build and rebuild castles of many different arrangements. So I made these, and they are just the cutest.…
Print with a small support on the Female side of the dovetail.
Create parametric dovetail. You want to print a OpenSCAD design too large for your 3D printer ? Try to cut them with a dovetail ! Updated version : https://github.com/hugokernel/OpenSCAD\_Dovetail Example // Your amazing design you want…
This adapter allows you to mount your PVS-7 to modern dovetail interfaces. included are 2 versions, to either place the Dovetail on the under- or upperside of your NVG. with this it is possible to attach your PVS cheaply and pretty…
If you have an enclosure for your 3D printer or just wanted to mount your Orange Pi 3 LTS on a wall, this is the model for you. Along with the remixed case, this enclosure allows you to attach a dovetail styled quick release system where…
tight fit tapered dovetail rails - to glue or remix as connection mount
Mounting plate with snap lock - 180° rotatable
A simple dovetail print
Vixen-style universal dovetail plate (75mm long) for telescopes. Print upside down so you won't need supports. Center thread is ¼-20 UNC. Best to print with plenty of solid perimeters for strength.
Once you have an initial relief groove cut you can use the relief guide with the Makita router plunge base to add more grooves at 4" intervals. (Swap out the original sub-base for the 3D print). Change to the dovetail bit, check the bit…
11mm / 3/8th inch dovetail rail to picatinny rail adaptor. I like the options available on Thingiverse for rail adapters, but most of them raise the scope too much. This design gives me the ability to mount picatinny optics easily without…
This is an original design I made for my telescope shop. Feel free to print it and give me feedback for suggestions. This model is printed in FormFutura Carbonfil (PETG with 15% carbon fiber re-enforced) I modeled M8 threads into this,…
Gaveteiro simples para duas gavetas grandes. Pode ser empilhado ou colocado lado a lado com utilização de imã.
Clamp to attach a Mele MiniPC (eg Quieter 3) to a Vixen Style dovetail rail. I have designed this clamp to attach a Mele Mini PC, which is a popular choice amongst astronomers for telescope control, to a vixen style dovetail. The hole…
Ich habe eine Schablone zur Herstellung von Schwalbenschwanzzinken konstruiert. In der mitgelieferten Fusion-360-Datei kann die Schablone an eigene Bedürfnisse angepasst werden. Mittels der Parameter können die Fräsereigenschaften sowie…
This was a test for another project that I repurposed as a money gift box. Print at 0.2mm and then use.
Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…
Fully parametric box with sliding dovetail lid. The included stls are for a 100 x 60 x 30 mm box with 2 mm walls and 2mm corner radius. To modify, simply download the f3d file and open it in fusion 360. Then click modify > change…
Vixen dovetail bars for ZWO Seestar S30 and S50 smart telescopes. I made these in both 60mm and 90mm lengths. The 60mm lengths are good for most of the EQ wedge adapters on the market and the 90mm length is good for the William Optics EQ…
Could not found something useful to mount on my AEA HP Max. So I created a little adapter for the Dovetail. Very tight fit! I used a little hammer to push it in. My goal was to not use screws to save space but have it fixed at the same…
A long case with a slide on locking band - now with 1 less dovetail for easier operation! https://youtu.be/ia2_srxa-og Printing No supports needed. This is a very tall print, add brim if bed adhesion is an issue. In some cases, printing…
In the video below I show you how to build a router table sled. This page contains all the plastic parts I used in the process.
this is a mod of the gb22. the barrel and frame are 1 piece. the slide is in 2 pieces that go together via a dovetail. the slide is moved forward via a rubber band attached at the end of the slide and connects at the trigger guard. these…
This is a font for use with a pantograph machine for engraving. This version has dovetails for mounting in a clamping rail. The font size is 1", and the overall height of the blocks is 1.75". The template is designed to guide a 1/8"…
Box with dovetail lid and four compartments. Size: 80x60x30mm (scaleable) Material: PLA Layerheight: 0.2mm Infill: 15%
Simple front sight that slides onto any 11mm dovetail rail as an end piece. Should fit very tightly without any play. Has a slot for a short piece of 1.75mm filament or optical fiber to serve as the dot. Designed to shoot a Steel Breech…
Vixen-style universal dovetail plate (200mm long) for telescopes. Print upside down so you won't need supports. Center thread is ¼-20 UNC. Best to print with plenty of solid perimeters for strength.
Vixen-style universal dovetail plate (100mm long) for telescopes. Print upside down so you won't need supports. Center thread is ¼-20 UNC. Best to print with plenty of solid perimeters for strength.
Do your heart beat? This is a puzzle box. Give it to your friend and see, if he/she can open it. If yes, I'm pretty sure that he/she will be happy about that little surprise you put into the box before... Need a little hint? Just read the…
Vixen-style universal dovetail plate (250mm long) for telescopes. Print upside down so you won't need supports. Center thread is ¼-20 UNC. Best to print with plenty of solid perimeters for strength.
This is a parametrically designed holder for drills and drill-like objects. The design incorporates dovetails, so each unit can be securely connected to it's neighbor as you add more drills to your collection. The version uploaded here…
Solar finder for Vixen/Synta-style finder dovetails used with most telescopes. Get ready for the April 8, 2024 total solar eclipse! This simple device can help you align your telescope (with appropriate solar filter) towards the sun. This…
You need an m5 bolt and nut
Here's an impossible dovetail box that I designed. A fun little twist (literally) to this box is the inner compartment that allows the box to have a full-length dovetail but also ensure that whatever gets stored inside will not interfere…
This is an accessory to mount a red point finder on a Hadley telescope. No modification needed on the telescope. The fixation is using an existing hole. It's compatible with Ø12mm rod. You need : 2x M4 screw L15mm 2x M4 nuts
I designed an all-in 3D printed table saw throat insert. It features changeable dovetailed zero clearance strips that are easy to make from 1/4″ birch plywood. The insert allows full range of movement of blade and splitter (height and…
Remix of CY's 3d tilted base to split the print into dovetailed sections so it fits on the smaller bed of my Prusa MK3S+. Dovetails have a 0.2mm gap which may be printer specific. This gap was a little too large on my Prusa MK3S+, but the…
This is a holder for the Pegasus Pocket Powerbox Micro (PPB Micro), generally used to distribute power to the devices mounted on astrophotography telescopes. The PPB can be fixed to the 3d printed holder with two 20mm M3 screws. The…
I wanted to design a better modular wall mounting system. This system uses a french cleat style approach with a dovetail profile thrown in for easy mounting and alignment. The cleat mounts to the wall. There are multiple versions. The S…
