Search results: whetstone

Whetstone Tray for (1"x2"x6")

A tray for a standard (1"x2"x6") whetstone. A dolly for sharpening 30° wood chisels is in beta.

Whetstone Knife Sharpening Aid

About the tool A simple whetstone knife sharpening aid. Helps when getting started sharpening blades using a whetstone. 4 Different angles for different types of blades. 14°, 17°, 20°, 25°. Common Sharpening Angles: Pocket Knives- 20°…

IMPOREVED Whetstone Knife Sharpening guide

Better Cleaner overhangs! Teardrop shaped hole with horizontal ring edges. Stronger parts! Weak point at the top eliminated. Rounded edges on contact surfaces! Helps reduce friction between the tool and working surface reducing wear and…

Whetstone Knife Sharpener Slider

Remixed Whetstone block, to be used with knife to slide along the block maintaining the correct knife angle. 4 x different angled sliders to get suitable angle. Common Sharpening Angles: Pocket Knives- 20° Hunting Knives- 25° Fillet…

Knife sharpening helper guide for 60 x 180 mm whetstones

Knife sharpening helper / guide for 60 x 180 mm whetstones. Remix of "Whetstone sharpening helper" by Rejd (thingiverse.com/thing:2493459). Sliders, slider angles and base plate shape were modified. Max stone height: 30 mm Angle…

Whetstone angle guide(Knife sharpening aid)

I added text to it so you can remember the use. PLA, 0.15 mm layer height , 10%infill.

Whetstone sharpening helper

Sharpening jig using a whetstone. Baseplate has guiding rails, knife just gets inserted either in the 25° slot or laid on the 20° flat of the slider. Not even quite sure what to use the 25° for besides pocket knives that get heavily…

Whetstone sharpening angle guides (customizable)

Customizable sharpening guids for whetstones / sharpening stones. There are various other versions of such guides available, but none of them made me 100% happy. This one is customizeable in size and keeps the rubber band safe in its…

Angle-Assistant for Whetstone / Knife Sharpener

A simple assistant to keep a constant angle while sharpening knifes with a whetstone. Technical Data: for Whetstone 180x60x30 for Whetstone 182x62x30 for Whetstone 200x50x25 Print Settings: no supports required printed with normal PLA…

Angle Pyramid Whetstone Knife Blade Sharpener Sharpening Stone Angle Guide (15, 25, 30, 40 degrees)

I recommend scaling up to 1" on the sides (166%).

Whetstone / Sharpening Stone Case for Ruixin

I bought a 9-piece set of sharpening stones for Stefan's CNC Kitchen knife sharpener ( https://www.printables.com/model/81237-knife-sharpening-tool-v21-with-video ), but needed a way to store them. There are cases for smaller sets but not…

Knife sharpener - Wusthof whetstone

Custom made for my Wusthof whetstone (ref 704773), here is my sharpening device ! Inspired by some i found here, i made my own, according to my tastes and needs. I purchased the stone online on knivesandtools (24€ + shipping) , very happy…

Knife Sharpening Guide for 60 x 180mm whetstones, sized for smaller printers

I wanted to print the original model on my Prusa MINI, but it wouldn't fit the smaller build plate even when rotated...so I edited the file by chopping off the corners so it would fit! You will still need to rotate the model to fit…

Rugged Box with stronger hinges (still Parametric) + whetstone box UPDATED

NOTE (UPDATED VERSION): When I was cleaning the Fusion's file from redundant sketches I accidentally lost a couple smaller holes that allow M3's thread to bind, so some people could have had problem with screws staying in place. I re-did…

Whetstone sharpner

Needed an whetstone model that would fit my whetstones. Created an remix of another model with inspiration from linked remix model. The narrow sledge is made for knives whit a long handle. printed with 0.6 nozzle and 0.2 layer height.…

Adjustable Sink Bridge and Whetstone Holder

Update 15/09/2025 - I've rebuilt the model in Onshape and provided an updated set of stls, a .step file, and a link to the onshape document for easy customisations. This fixes the issues from earlier comments. Description updated to…

Sharpening Stone / Whetstone case

I like to keep my knives sharp. However, finding where to soak my sharpening stone was always a pain. So I decided to develop a case that can accommodate multiple tasks. Soak a whetstone and don't take much space. Hold a whetstone and its…

DMT 6" Diamond Whetstones & Holder Box

The box is based on my parametric “ Rugged Box ” and holds up to three DMT 6" diamond whetstones and the holder you can find here: https://www.printables.com/model/610107-dmt-6-diamond-whetstone-holder Support my work For non-Prusa parts…

Work Sharp Alternative Diamond Whetstone Holder

Wanted to use different (and much cheaper :) ) diamond whetstones in my Work Sharp Benchtop knife sharpener which I really like. Adapter is designed to insert 160x20mm magnetic baseplate for 150x20mm diamond whetstones. These can be…

DMT 6" Diamond Whetstone Holder

Just print and add some rubber feet. A box to store three whetstones and this holder: https://www.printables.com/model/610119-dmt-6-diamond-whetstone-holder-box Support my work For non-Prusa parts and filaments, check out 3DJake (…

Cheap whetstone box

This is a box for small cheap whetstone like this one : https://www.amazon.com/Whetstone-Stainless-Scrubber-Sharpening-Multi-use/dp/B09YNTBLVR Approximately 150 x 50 x 22 mm The base has a tighter fit compared to the top. You'll need 8…

Atoma or Shapton Glass Sharpening/Whetstone Holder

A lid to cover your expensive sharpening stones is in the works I finally got some Shapton Glass ceramic whetstones, along with an Atoma diamond stone, and I wanted a simple way to store them without the fear of them hitting each other.…

Simple Parametric Whetstone Knife Sharpener

Customisable whetstone size and sharpening angle (Edit VarSet in FCstd file and recompute) Deafult parameters: Angle: 20 Whetstone: 109x38x20.5

Sharpening Stone Holder / whetstone holder

This is 1st version of the whetstone holder, designed for stone di. 224 x 72 mm. tightening screw di. 4 mm The screw knob is a remixed design (https://www.printables.com/model/242353-diamond-knob)

Whetstone Knife Sharpening Aid (NORTON 52mm India oil stone

Hello, thanks to idea of Mr. by DevonRogers https://www.thingiverse.com/thing:5955359 , i remix it in order to fit to my stone and added a Neodimio magnetic disks 8x2 mm. Add bicomponent glue to fix it. Additional version called V2 is…

RUIXIN Pro RX-008 whetstone platen set for use with Wicked Edge sharpener system

If you have the Wicked Edge system but also like to use stones, combines these platens with the Riuxin Pro stones. The guide hole has been set to maintain the same distance from the surface of the stones as the original Wicked Edge…

Truing Jig for Whetstone Sharpener - Tormek TT-50 Style

Whetstone guide

This model is for a whetstone guide of 20 degrees grind angle. The model is made to fit a 103 x 32 x 6 mm stone. The example is printed in PETG. 0.1-0.2 infill Print without supports. The sled is best printed on its rear end. Edit: If…

Whetstone Guides

These guides where designed for a 60mm wide whetstone block. I have included the Fusion 360 file is you want to make it thinner or wider. I recommend printing them with the label side down and to use a smooth plate if you can. There is no…

Angle guide for whetstone - (The Uterus / The Bull)

UPDATE 2025-05-03: Added a longer “ball-rod” that could be used for thicker stones and/or larger knives. UPDATE 2025-03-06: Version 2 has gotten an additional clamp, a lot sturdier clamp that will not work for small knives but will be…

Horl to China-Whetstone Adapter

This Adapter allows to use cheap Whetstones from Aliexpress on a Horl Rolling Knife Sharpener. https://www.aliexpress.com/item/1005005998138458.html?spm=a2g0o.order_list.order_list_main.28.14461802Khu5MZ BOM: 2x Magnets 10x3 1x M6x8…

King Whetstone Guide 186mm x 65 mm (16deg updated)

Fixed the 16 degrees slider by removing part of it so that it fits around the plastic of a KING KW65 1000/6000 Whetstone

Whetstone Enclosure

This is simple enclosure for my RUIXIN whetstones... Just use 2 rubber bands to hold the stones in place. Also made a lot of opennings to let the whetstones dry after use. Print instructions Category: Hand Tools Summary This is simple…

Tray for whetstone sharpening helper

A tray for the sharpening helper from https://www.printables.com/de/model/147202-whetstone-sharpening-helper. Snuggles around the rails and has a tub to catch the water for the sharpening stone as well as fixing points to clamp the tray…

Whetstone Bracket

A simple Whetstone Bracket, which works great :) BOM: 2pcs 30cm M6 threated rod A2 4-6pcs M6 nuts A2 4-6pcs M6 washer A2 Print: 2x End-Bracket 1x Mid-Bracket 2x Thumbscrew M6 4x Endcaps M6 (optional) Happy sharpening Print instructions…

Whetstone Storage Box

This is a storage box for the most common sizes of whetstones you can get on Amazon/Temu/Aliexpress. This will hold 2 stones and the bamboo stone holder. The stones I designed around are 30mmx60mmx180mm. The bamboo holder is…

Whetstone sharpening guide for wooden base

The guides are designed for a popular wooden base which often comes with sharpening stones. The added lips prevent the guide left-right and rotational movement so you can focus on sharpening. I prefer using the smooth base edges for…

Whetstone Dryer - reupload

2023/6/11 - NEW Reupload!! I'm very sorry for the complications, I had to reupload all the models. Print instructions: I decided to use PETG. Printing the model does not require any special settings. See the attached 3MF file for detailed…

Whetstone Bridge

First iteration of a 3D printable whetstone bridge, for manual knife sharpening over the sink. There are similar designs, where this one differs most is the use of metal channel rather than threaded or linear rods. I went with aluminum…

fallkniven dc4 whetstone holder

This is a simple holder for fallkniven DC4 whetstone, but will fit similar whetstones of similar size. Could be scaled to fit whatever size you have. I printed it in PLA and TPU, both work great. If you need a similar holder for any other…

Sharpening chisel station - Whetstone/Diamond holder

Use is as project

Whetstone Sharpening Stone Angle Reference Blocks

This is a set of angle blocks that can be attached to the edge of a whetstone or other sharpening stone to provide a reference of the desired angle before taking each stroke on the stone. This helps beginners get used to holding an angle…

Whetstone holder Wetzsteinhalter

182mm length 63mm broad 25mm high

Knife sharpener for DMT Mini Diamond Whetstone 70 X 25mm

Knife sharpener for DMT Mini Diamond Whetstone 70 X 25mm Model is split for easing, no-supports printing. I attached the “clamp” stl to the “stone_holder” stl using 1.75 filament and super glue (CA). I did have to clean the holes with a…

Knife Sharpener with Fixture, Sled and Basin for Whetstones

Place your whetstone (here 200,50,25) into the fixture. Put your knife on the sled using the angle (here 15°) to keep stable. Move forth and back, Move your knife along. I provide the OpenSCAD model aside so that the whole fixture can be…

Whetstone Clamp

With this clamp, you can secure a whetstone at a 20 degree angle and use it like a V-Rod sharpening system/Crock Sticks. Instead of worrying about the angle, you just have to hold the knife straight. See these videos for the technique:…

Edge Pro Whetstone Enclosure

This is a simple enclosure for the wet grinding stones from Edge Pro. Three stones can be inserted.

Rugged Box for Whetstone Knife Sharpener

Rugged Box for Whetstone Knife Sharpener Made to fit the Work Sharp whetstone knife sharpener (Kitchen Series) Additional hardware 6x M4x30mm screws for the rugged box It also works with 6x M3x30 Printing Print box and latches with flat…

Fallkniven DC4 Diamond/Ceramic Whetstone Holder

This is a holder for the Fallkniven DC4 Diamond/Ceramic Whetstone. The stone should fit tightly into the slot. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 60 Filament: Generic PETG…

Worksharp Pro Dual-Use Whetstone Adapter

Like Staafi, I faced challenges with the costs of diamond whetstones, but I also noticed limited motion when using 150 mm whetstones.…

210x70x30 Whetstone Sharpening Helper

My whetstone is too big for Rejd's sharpening guide, so I increased the size and divided it into parts that fit diagonally on an Ender 3 style (220x220 mm) printer. I had to disable "Skirt" and print one part at a time. I've included my…

Whetstone Holder

It's a portable sharpening rack for those nice afternoons where you need to sharpen your blade on the front porch. Securing your honing/whetstones right on top a 10" water pot. For water access all in a arms reach. Enjoy. Used no supports…

Parametric whetstone case (Apex)

Parametric case for Apex sharpening stones. Among the STL files of the case for 5 stones measuring 160mm 25mm 10mm. You can change the parameters in the .f3d file. It is possible to change: Number of sharpening stones Width of sharpening…

Box for whetstones (Skerper proffesional/Knifewear/naniwa standard)

I have 3 skerper whetstones, they come in a carton packaging, so I designed a small box to keep them safe. I put some tpu at the bottom to hold them in place so I can use the box while sharpening aswell. I desinged them to be stackable…

Japanese Whetstone Holder

This is a minimalist base designed to hold standard Japanese whetstones sized 180x60x28mm The baseprovides stable support, proper water drainage, and a clean aesthetic suitable for workshop or kitchen use. Designed for resin 3d printing…

Whetstone 20° sharpening guide

Designed for use on a whetstone makes it easy and quick to get a good angle for beginners. most common / best angle to sharpen at from the quick search I did. Category: 3D Printing

Whetstone holder

Holder for a 180x60mm whetstone, with a silicone holder, that can be attached with screws to a bench, table or whatever. I attached it to a block of wood so I can move it as needed. If you like it or even make one, please post it, like,…

Whetstone sharpener bench holder

a holder for a commonly available 6"x2"x3/4" sharpening stone (the real dimensions of the stone slightly under size) , it holds the pictured stone snuggly but it is easy to pull out to clean or reverse. if you are using a different brand…

Whetstone holder for Fällkniven D3

Disclaimer: Due to the recent incidents (things appearing on ebay) I just want to make something very clear: I do not allow any commercial use of my STL-files, my designs and my photos! Description: I like my knifes sharp, so I am using a…

whetstone holder with guides

whetstone holder with guides that slots into the holder the guides go along the length of the stone you glue the two holder pieces together to the width of you whetstone/s

Whetstone Holder

Whetstone holder for 50x150mm whetstones. Helps keep it wet longer. STEP file provided for adaptation to other sizes!

Whetstone Base for Kitchen Knife Sharpening Guide 17 Degrees

What it is This is a base for the Kitchen Knife Sharpening Guide 17 Degrees by Meuon: https://www.printables.com/model/1800114-kitchen-knife-sharpening-guide-17-degrees The guide needs the stone top at a set height above the surface its…

Whetstone Sink Bridge

A whetstone holder designed to be mounted over a sink. Also called a sink bridge. Besides the 3d printed parts, it also requires 2x50cm M10 threaded stainless steel bars and 12 nuts to fix things on them. Optionally, it also includes…

Whetstone wet box and stand for @firstgizmo's Knife Sharpener

To simplify the use of the Knife Sharpener, I designed a storage container for the whetstone. It allows you to store the whetstone and soak it before use. Additionally, the Knife Sharpener can be placed on top. To prevent leaks, proper…

Whetstone base 20x5x2.5

This is a base or a holder for a 20x5x2.5 whetstone, i didnt print it yet so sorry for the shitty preview

Whetstone Wedge

Yet another wedge for whetstone but this wedge sits rather tight (for 25x50 cross-section whetstone) and can be printed without support. Printing: lay flat side down no supports 3 walls (outer, inner, outer) 7% infill PLA+ Rule of Thumb:…

Remix: Set screw relocation - Adjustable Sink Bridge and Whetstone Holder

These changes do increase the amount of material required and print time of course. Ideally, I would have reduced the height of the top face(s) an equal amount to keep overall height the same, but I was working from the .step file in…

Sharpening aid for DMT diamond whetstone

Years ago, I bought a DMT diamond whetstone to replace a worn out ceramic whetstone. Since then I’ve been happily using it for freehand sharpening of tools and knives. It is hard to get consistent angles when freehand sharpening. So when…

Whetstone Storage Box

I created this 3D model to store my Naniwa Chosera, Shapton Kuroaku, Shapton Rockstar, and Atoma Diamond Whetstone. I printed it using Prusament Army Green PLA, but unfortunately, I ran out of filament near the end, so approximately the…

Magnetic plate for dimond whetstones

Ideally, created to have 4 9mm coin neodymium magnets to fix 115*75mm diamond coated steel sheets to be mounted flush on top and it has a base that can accommodate another sharpening stone inside its base both pieces are meant to allow…

Slider for Whetstone guide

Slider for Whetstones oriented in two ways featuring a sharpening angle of 15 degrees and turned 60degrees

Scythe Whetstone Holster [Pochva na brousek] (a.k.a. Honing Stone Sheath)

Introduction A practical belt-mounted holder for a traditional scythe whetstone (honing stone). When mowing with a scythe, the blade is regularly touched up using a wet whetstone carried at the waist. This holder keeps the stone immersed…

Whetstone Gridfinity holder

This Gridfinity-compatible holder is designed to securely hold and dry your Suehiro #3000 SKG-21 and King Deluxe #1000-S sharpening stones. It includes a base to collect water, a TPU gasket for a snug fit, a stand to keep your stones…

Knife Sharpening Angle Guides - 15, 17, 20 and 25 Degree Whetstone Wedges, No Supports (OpenSCAD)

Get a consistent angle when sharpening on a whetstone. Stand a wedge on the stone, lay the blade against its sloped face to set the angle, then hold that angle as you sharpen. WHICH ANGLE? • 15 degrees: Japanese kitchen knives. • 17…

Whetstone working tray and drying rack (storage case)

This is a worktop / storage / drying rack all in one combo for whetstone. Whetstone dimensions: 185x65mm. I bought one that did not come with "worktop" and when wet and put to use, it gets quite messy. So I designed my custom worktop that…

Whetstone holder

We’ll need a lot of support. A great deal of it. All the support we can get. 17g, 1h 20m, Petg

Whetstone Holder

Somewhere out there is a circular whetstone (knife-sharpening block) with a concave groove around the edge of the circle. It'd probably help if I knew what brand it was, but I don't. On the off-chance that you have such a whetstone, this…

Whetstone case for KEENBEST 400/1000 + 3000/8000 set with bamboo base

Storage case for the KEENBEST 400/1000 + 3000/8000 whetstone set with bamboo base: https://www.amazon.de/dp/B09FL3LY51 Holds everything except the leather strop, each part in its own pocket with 1 mm clearance so nothing bounces around:…

Whetstone base 20x5x2.5

This is a base or a holder for a 20x5x2.5 whetstone, i didnt print it yet so sorry for the shitty preview

Whetstone wet box and stand for @firstgizmo's Knife Sharpener

To simplify the use of the Knife Sharpener, I designed a storage container for the whetstone. It allows you to store the whetstone and soak it before use. Additionally, the Knife Sharpener can be placed on top. To prevent leaks, proper…

Whetstone Holder

It's a portable sharpening rack for those nice afternoons where you need to sharpen your blade on the front porch. Securing your honing/whetstones right on top a 10" water pot. For water access all in a arms reach. Enjoy. Used no supports…

Tray for whetstone sharpening helper

A tray for the sharpening helper from https://www.printables.com/de/model/147202-whetstone-sharpening-helper. Snuggles around the rails and has a tub to catch the water for the sharpening stone as well as fixing points to clamp the tray…