Dripping Puddle Decoration - No Supports Required
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Looks like a bright puddle dripping down the edge of your shelf or cabinet.
- Ocena
- 5 / 5
- Polubienia
- 213
- Pobrania
- 685
- Wydruki
- 4
- Wyświetlenia
- 1661
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Standard Digital File License
Here’s a fun little illusion piece I designed—looks like a bright puddle dripping down the edge of your shelf or cabinet. It’s a single-piece print that creates the effect of spilled paint, slime, or wax frozen mid-drip.
I printed mine in a bold red filament to make it pop, but you can experiment with glow-in-the-dark, translucent PETG, or even marble filaments for a totally different vibe. The flat puddle top rests flush on a surface, while the dripping streaks hang down dramatically to grab attention. Perfect for adding a quirky accent to your workspace, living room, or even your kitchen.
This design requires no assembly and is print-friendly right off the plate.
Layer Height: 0.2 mm
Nozzle: 0.4 mm
Infill: 10–15%
Supports: Not required
Material: PLA or PETG recommended
Orientation: Flat puddle facing the build plate