Nano Tool - quick swap hotend for 3D printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the Nano Tool I use in my CorEssentials 3D printer.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 1240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is the Nano Tool I use in my CorEssentials 3D printer. You can find the most current files on the GITHUB-Page:
https://github.com/MacNite/CorEssentials
There are 3 different kinds of tools available:
- Nano Tool Bowden (Coldend: 1x MF25101V1, Part Cooling: 2x UnitedPro 3510)
- Nano Tool Zesty Nimble (Coldend: 1x MF25101V1, Part Cooling: 2x UnitedPro 3510)
Chimera Aqua Tool (Coldend: Alphacool Eisbaer Solo, Part Cooling: generic 4010 Blower)
Most of the tools are available with markings for the nozzle size (i.e. 040 for a 0.4mm Nozzle).All these tools are desinged to work in the passivly heated chamber of the CorEssentials. I have tested them successfully for ambient temperatures of up to 55°C. I would not go much higher with chamber temperature on my printer because I printed the parts I use for the printer from ABS.
Print instructions
Category: 3D Printer Parts