CoreBot - CoreXY 3D printer with linear rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to built a really reliable printer which is reade for the E3D tool changing mechanism, when it is finally…
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 153
- Wydruki
- 0
- Wyświetlenia
- 6890
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to built a really reliable printer which is reade for the E3D tool changing mechanism, when it is finally realeased.
At first I planned to built a Hypercube / Hypercube Evolution but soon found I that the design was not stiff enough for the build area I was aiming for.
So I started optimising all parts and changed all linear guides to Hiwin Rails (MGN12 for y- and MGN9 for x-axis). While doing so I also added an "electronics compartment" on the back using 3060 aluminium extrusion.
The printer features a built area of roughly 500x500x500mm. The y-axis is optimised to allow space for the tool changing mechanism. I included an Excel Sheet so you may calculate the requiered length, if you aim for a smaller version.
For detailted instructions & bom have a look at the instructable: