1 / 4
Slim Modular Steelbook Caddy
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slim versions of my Modular Steelbook Caddy models that save a good chunk of space.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 223
- Wydruki
- 1
- Wyświetlenia
- 1482
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (39)Powiązane
A slimmed down redesign of the original modular steelbook caddy. Allows for more pieces to be placed on a shelf, improving on a major complaint of the original model. This also resolves an issue with slightly larger steelbooks that were had a little more of a snug fit with the original design.
Materials needed:
- Left and Right - 2x ( 5 x 3 mm round neodymium magnets)
- Middle - 4x ( 5 x 3 mm round neodymium magnets)
---------------------
What's changed?
All pieces:
- Better magnet tolerations
- 2mm taller (to accommodate for magnets to be able to have room)
Left end-piece:
- Removed the right wall
Right end-piece:
- Pushed the left wall to be flush with the rest of the left side
Middle piece:
- Removed the right wall
- Pushed the left wall to be flush with the rest of the left side
Other things to note:
- Due to the new placement of the magnet holes, the slim versions are not compatible with the original version.
- The left and right ends still have one side extended, this is to provide better support on the end and to have a little bit of a buffer to avoid scratching on the side of a shelf.