Print-in-Place Magnetic Cable Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Magnetically-Secured Clip to Keep Your Cables Handy
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 3
- Wyświetlenia
- 369
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
A Print-in-place hinged magnetic clip to keep your device cable handy!
Designed to hold (2) 6x2mm rare-earth neodymium magnets with a friction-fit. Models are provided for 3mm, 4mm, 5mm, and 6mm diameter cables.
When closed, securely holds the cable, but a gentle tug will open and release it. There's also a finger recess to make opening easier without pulling on the cable.
Print in PETG, ASA, or ABS if you're planning to use in the outdoors or a hot environment like a car.
I prefer 4+ perimeters, 40% cubic infill. If you don't have a textured buildplate, changing your first layer infill pattern to Concentric, Archimedian Chords, or Octagram Spiral can add some visual interest.
Make sure the print has been given a good chance to cool before removing from the build plate, to limit the risk of introducing a bend in the clip, which can affect how well it closes.