Print-in-Place Magnetic Cable Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Magnetically-Secured Clip to Keep Your Cables Handy
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 39
- Makes
- 3
- Views
- 372
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Share Alike
A Print-in-place hinged magnetic clip to keep your device cable handy!
Designed to hold (2) 6x2mm rare-earth neodymium magnets with a friction-fit. Models are provided for 3mm, 4mm, 5mm, and 6mm diameter cables.
When closed, securely holds the cable, but a gentle tug will open and release it. There's also a finger recess to make opening easier without pulling on the cable.
Print in PETG, ASA, or ABS if you're planning to use in the outdoors or a hot environment like a car.
I prefer 4+ perimeters, 40% cubic infill. If you don't have a textured buildplate, changing your first layer infill pattern to Concentric, Archimedian Chords, or Octagram Spiral can add some visual interest.
Make sure the print has been given a good chance to cool before removing from the build plate, to limit the risk of introducing a bend in the clip, which can affect how well it closes.