Liczymy pasujące modele…
Organizers for drawers with hexagon walls and bottom as well as closed or open front and connector to keep them together. There are several sizes available, all organizers are 30mm in height. Sizes (Width x Length): 100x100 100x120…
This is a holder for up to ten tweezers and optionally one additional cross tweezer. I found no holder which is mounted vertically to the wall and was suitable for my set of ten SMD tweezers, which you can find easily in the common online…
Trays for IKEA Skadis with hexagon or solid bottom, open or close front and compartments. The trays are mounted to the wall via hooks or the T-Nut-system from 6d6178 (M3 screw). T-Nuts can be found at the T-Nut-System or you use other…
To customize the threads for T-Nuts i could not find a OpenSCAD - Version, so i made one with M2, M2.5 and M3 threaded nuts as well as one version for heat inserts. You can use this T-Nuts with the system from 6d6178 and customize the…
I could not find a holder for wire spools for the IKEA Skadis - system which fulfilled my needs, so i decided to build one. I also use this holder for other light weight spools. The holder uses the T-nuts system from 6d6178 (many thanks…
Just a remix of a drill stop to limit the drill depth. The prebuild stl-files are for drills with diameters from 2 to 14mm, but you can customize this easily for your needs with OpenSCAD, the file is also attached. You will need the great…
Three soil block makers with changeable dimple makers (screwable) Dimensions of the blocks: 35 x 35 x 35 mm 25 x 25 x 30mm 35 mm round / 35mm high (fits the common growing boxes) Because i had some adhesion problems, i added a version…
WAGO 221-2411 clip, screwable (M3, 10mm distance in both directions), connectors (not to) easy to push out and push in, 1 to 8 connectors, created with onshape . No supports needed, printed with PLA
Inspired from a purchasable hook which did not fit my needs (to big) i designed a similar hook for rails. The hook does not come of easily from the rail, so it is perfect for hanging clothes or other things on the rail. You can customize…
Cases for different ESP32 boards Seeed XIAO ESP32 C6 (21 x 17.8 x 1.35 mm) Waveshare ESP32 S3 Zero (24 x 18 x 1.7 mm) ESP32 C3 SuperMini (23 x 18.2 x 0.8 mm) No screws required, the lid is fixed by friction Different openings for…
Just a little helper. I needed to screw a basic hook for a box, which i wanted to mount to the Skadis board, but i did not find a screwable one, so i made it. The OpenSCAD - file is attached, so you are able to customize the hook if…
Parametric Turnable (Pivot) Tray Tower for IKEA Skadis This is a tray tower for IKEA Skadis, which i designed because i wanted to use the space of the pegboard as good as possible. The top and bottom trays are fixed, the other trays are…
Just a bunch of boxes for storage with hexagon or solid bottom, closed or open front, two heights, optional stackable, thickness of walls and bottoms from 0.8 mm (lowpoly) to 1.6 mm Dimensions (width x depth x height): 80 x 60 x 20 mm 80…
A nice curved toilet paper holder with a matching tray. Mountable with double sided tape (recommended), screws (M4) or on a Skadis Pegboard with T-Nuts or hooks. You find all the versions in the files, I personally use it in my workshop…
Holder for speedsquares, should fit fit a lot models, but you can customize it with OpenSCAD. To mount it to the pegboard you can use the normal hook or a version for the T-Nut system from 6d6178 (…
These are small holders for the ruthex soldering tips for heat insets. There are six versions: double row holder with hook double row holder with hook and text double row holder prepared for T-Nut double row holder prepared for T-Nut with…
This is a simple holder for drill bits with a shaft of 1/8 inch with a drill diameter from 0.3mm to 1.2mm. I use them with my milling machine, you can find them easily at the common online shops. The holder is designed with OpenSCAD (file…
Parametric Seed or Condiment / Seasoning packet organizer with flexible dividers (every 10mm), height 40mm, divider height 54mm. The dividers are placed angled (15 degrees). Parametric OpenSCAD file is included. You can connect the boxes…
Some stackable hexagonal voronoi trays Sizes: height: 14 mm outer diameter of hexagon: 100, 160 and 200mm Printing: easy, no supports, i used PLA
Just a turnable solder tip holder for ten solder tips of common solder stations. Diameter of a single holder is 3.5mm (inner diameter of a tip is normally 3.9mm) , the height of the holders is 18mm. Printing: I used PLA+, 15% infill
Just a simple tray with some nice roundings, chamfers and a hexagon bottom, you may use power strips to put it on a wall
Simple cable housings to safely seperate 2 to 7 connections of wires which are connected via cable sleeves. I do this often instead of using plugs, WAGO connectors, soldered connections or Dupont connectors while prototyping. While using…
SMD component dispenser system because I was also sick like the original designer to search my boxes for the right values all the time, but i needed it for my Skadis board and i liked the original design, so i remixed it with OpenSCAD.…
I sometimes use the T-Nuts to put things to the SKADIS wall, but i now had a selfmade small board where i had to mount a hook from the backside. First i used the T-Nut, but as it i was not confident with this, i made an threaded nut with…
Was playing around with OpenSCAD, my wife likes this one. Sizes: 100mm diameter, height 20mm 200mm diameter, height 30mm Printing: PLA but any material should work 3 Perimeters, no infill no supports maybe a brim, depends on your bed…
Just simple holders for a clothes rail with 20mm, 25mm or 32mm diameter to mount a rail on a door or wall (M5 screws) including caps for the sides of the rail. Printing (recommended): PETG, 100% infill, 5 perimeters, no supports
The answer to the Ultimate Question of Life, the Universe, and Everything.
To wszystkie aktualnie dostępne wyniki.
