Liczymy pasujące modele…
A very simple rotary attachment for a laser engraver using standard reprap parts. This uses two NEMA 17 motor wired in parallel. It is cut from 1/4" MDF. The design is simple intentionally so it can be modified and changed to fit your…
I love the Arc reactor here http://www.thingiverse.com/thing:13171 sadly there was no place for a battery or switch. So I made this to hold everything on the back. Instructions There is no attachments so you will have to glue it onto the…
The original box was nice but didn't fit the Smart Adaptor and had a few glitches. Instructions The box shrinked too much when printed in ABS so I scaled it slightly to be printed in ABS. I also noticed that a few of the connectors were…
Photos are licensed CC BY-SA 4.0 International by Aleph Objects, Inc. This is a 3mm acrylic laser cut enclosure for the Lulzbot Taz6 enclosure. It uses the corner brackets to hold it in place and encloses the whole printer. If you don't…
Photos are licensed CC BY-SA 4.0 International by Aleph Objects, Inc. Update: Version 2 has be updated and simplified with smoother corners and less part counts. The offset on the front has been eliminated and the instructions has been…
I'm working on building a giant 6ft x 4ft laser cutter and I needed a cable chain solution for the X axis which needs a way to elevate and mount the chain on the moving assembly and a stationary mount for the beam piece itself.…
This is a 3mm acrylic laser cut enclosure for the Lulzbot Taz5 enclosure. It uses the corner brackets to hold it in place and encloses the whole printer. If you don't have access to a laser cutter you can purchase a kit that includes…
This is a remake of some wonderful design work over at Inventables https://www.inventables.com/projects/mwp-y-axis-braces and https://www.inventables.com/projects/mwp-y-axis-belt-dust-guards There wasn't any source files so modification…
Holds your NAZA-M plus receiver and cable management for inside a flamewheel hexacopter frame. Category: R/C Vehicles
I couldn't wait for the new X-Controller to come out so I made a laser cut case for my X-Carve electronics and I added a lot of the options to the base. The relay is internal and has two plugs with separate switches which allows each one…
This box holds everyhting RAMP's 1.4 and has spare room in the bottom for extra wires. Instructions This will hold a fully loaded RAMP's 1.4 with Smart adaptor and has a hole for a 1/2" power button and a 1/2 power indicator. It also has…
This is a bunch of improvements of the RepXL rolled into one build plate. Read the instruction for what was change and added. I just made a ton of changes and additions to the file on 11/25/12. Read about the changes in the instructions…
Laser tube extension protection for Redsail M700 Instructions The base has screw holes ready for m3 screws from the backside. Then print as many extensions as you need for your tube and finally print a cap. Category: Parts
I upgraded my laser tube in my cutter to 100w which is 80mm and I needed to raise my mirror mounts. Here is a 74mm mirror mount with through holes for M4 threaded rod to hold the mirror tight and flat. Category: Tools
I took the screw holes out and opened the receiving collar so the hing moves more freely. Also the files with rev in the name are already reversed. The files with the word offset in them have a 3mm offset in the base so you can mount a…
Complete enclosure solution for Printrbot Simple Metal with spool holder, power supply, raspberry pi mount, control panel, drawer, filament guide. Instructions Cut from 1/4" MDF and acrylic. All the nuts and bolts are M3 25mm with a…
This includeds the hinges and laser cut parts to make a front door solution for your makerbot Replicator If you don't have access to a laser cutter let me know and we can work something out. Instructions This is a derivative of thing…
Simple slide on mount for a Belkin Universal Media Reader on the new iMacs or new thunderbolt or LED monitor. Instructions Slide the reader in and plug in the USB. Simple Category: Computer
People were asking for a way to vent or manage fumes on the Replicator hood. http://www.thingiverse.com/thing:23386 This mounts with a 40mm fan and fits a 3" dryer tube. Instructions All you need is a 40mm fan and 4 M3 bolts. if you use a…
I designed these to hold the front panel for http://www.thingiverse.com/thing:23386 but then as I thought about it I made it do so much more. Instructions Print one set out for the front panel of http://www.thingiverse.com/thing:23386…
Get organized with your replicator. This will hold 4 spools of plastic plus a little toolbox on the front for all your accesories. If you feel the need to clean up your space and make your replicator a more organized space then this is…
Nice simple mount that will protect the NAZA GPS module Category: R/C Vehicles
I needed a mockup of the new MacPro so I took all the info and design I could find and here it is. Please note that the actual MacPro would make a better ashtray since it is made from actual aluminum. Category: Computer
A simple laser cut plate to hold two reel rollers from Airtripper Pocket Filament Reel Rollers. Adjustable. Instructions Print 2 of these from Airtripper: http://www.thingiverse.com/thing:21435 M3 bolts 10mm and nuts is it. Category: 3D…
I combined the best of two worlds I took the mounting hole from http://www.thingiverse.com/thing:23257 that uses the Pittsburgh (Harbor Freight 93295) Digital Indicator and I modified http://www.thingiverse.com/thing:27025 to hold it.…
Front panel replacement for the FT-5 to use the Full Screen Graphics display. Nice drop in replacement. Category: 3D Printer Parts
Using 5/16 Fiberglass rods from Tap Plastics I modified the Rostock Rod end's to fit inside and bond with Epoxy. Instructions Get some 5/16 Fiberglass rod.…
This is a stronger version of my other design http://www.thingiverse.com/thing:765057 this version uses 8mm threaded rod to hold it solid to the frame so it can take more abuse. Category: Other
So teachermakesthings made these clips and asked if someone would make up some cut files for the panels. http://www.thingiverse.com/thing:30311 Instructions So teachermakesthings made these clips and asked if someone would make up some…
I couldn't wait for the new X-Controller to come out so I made a laser cut case for my X-Carve electronics and I added a lot of the options to the base. The relay is internal and has two plugs with separate switches which allows each one…
I modified the dimensions to use 3mm Acrylic so it could be cheaper and faster to cut. I wanted to modify it so people could use hacker spaces and places like techshop laser cutters. Even at 40W you can still cut this in a single pass. If…
Its a case for the Open Hardware Geiger Counter from MightyOhm Made out of 3mm Acrylic and some M5 and M3 bolts. Instructions Sandwich and bolts are all you need. Category: Other
Simplify3D model for a Printrbot Simple Metal with the extended bed upgrade. It's a very simple model but it's perfect for visualizing your work area. Category: 3D Printer Accessories
If you have tried removing an ISB from an ISIS 7000 you know it's a pain on your fingers. Now there is a tool for that. Also in some cases you need to remove the controller board from the frame. Sadly it takes a great deal of strength and…
This is a longer version of http://www.thingiverse.com/thing:27865 in both directions giving you more support and filling the HBP with a full 5" across and high. Instructions Print one set out for the front panel of…
All the webcam holders didn't seem to get the whole bed in the shot and I wanted a direct head on shot of the build. Instructions 6 M3 22mm nuts and bolts and some 5mm plywood is all you need to put it together. I made the platform for…
Along the same line as my Replicator hood kit I've now made a ToM version. This helps keep the heat in and prevent drafts from messing up your prints. It has a long gap down the center to allow air to escape and allow filament in and out.…
So I originally made a simple connector plate for power and USB so the cables didn't come loose out the back of the RostockMax. It's just a power jack and USB panel mount adapter. I saw the vent design by jimustanguitar and I really liked…
C02 Laser tube mount adaptor Instructions I'm in the middle of building a giant 6ft x 4ft laser cutter and I got an F4 100W CO2 laser from lightobject.com and some mounts for the tube. The mounts have a sharp v-shape and I wanted a full…
This is a simple modification of the original design. Originally it was a bit to tight inside to get all the wires ran and close the front door so I added an inch to the depth of the whole thing and made the hole on the top an inch wider.…
This is eactly the same as http://www.thingiverse.com/thing:99151 except I added ears because it was getting close to impossible to get a good print without ears on it. All credit to the origital creator jetpad and if he wants to add this…
Use this simple mask to apply Kapton tape to you HBP. This made be the simplest design ever on thingiverse but damn if its not helpful. Instructions Cut it out of what ever you have laying around. I like wood because the tape is easier to…
Some people have noticed that the orginal clips were wiggling loose so I added some roud knobs to the inside of the clips to help give them some bite when putting them on. Instructions This is a modification of the side panel clips by…
Someone on the replicator google group mentioned they wanted more cooling for their MB. I think it might be overkill but here it is. Instructions I just added an stl version of the fan mount so you don't need a laser cutter to make that…
This is derived from my other enclosure where I decided to eliminate all the enclosure parts so I could install the new 10" X-Axis upgrade without making this giant table box enclosure. So I went with an open air design that can still…
People have seen the front of their HBP sag almost 2mm after 30 minutes. Before this modification I was getting 1.8mm sag after 30 minutes and now .45mm sag after 30 minutes. If you don't have access to a laser cutter let me know and we…
To wszystkie aktualnie dostępne wyniki.
