Liczymy pasujące modele…
Overspray protector as sold by my favourite motorcycle (and bicycle) care product manufacturer, O.K. Wack Chemie, under the name “SauberSepp” or “CleanBob”. Of course, mine is better :) I have added sides to the reservoir to keep the lube…
Wiper blades stop wiping well when the edges of the rubber blade get rounded off and are not as sharp as new. This can be remedied by cutting a thin strip of the blade off and generating a new sharp edge. Use this tool and the sharpest…
Cut appropriate length of M6 threaded rod or smooth rod with 6mm diameter. Make sure the rod is straight, otherwise everything will be wonky. You can simply screw the mixer on the threaded rod, with a smooth rod you might be required to…
Standard silicone cartridge nozzles are too wasteful for my taste - you have to push out a great volume of material to fill them and get it going out of the nozzle. Also, there's never one around when you need it, because they're…
I needed to make something to attach to a PET bottle and couldn't find a model file to import into FreeCAD. So here's one. The model is not really useful for anything (unless you desperately wish to have a ring screwed on top of your PET…
The adapter installs into the main body of a Dyson™ Motorhead v7 vacuum cleaner and allows you to attach the HEPA final filter (instead of the standard motor cover). print in the orientation shown in the model files, with supports…
Print in something that is not brittle, preferably with a brim. There are no supports required as the model features in-model supports itself (between the lowermost plate and the one above). Make sure to enable “detect thin walls” and…
This will hold your pliers on their side and save space. I got annoyed with not finding the right pliers and whipped this up in a couple of minutes. It's stupid simple, but it works. Print two rails and as many partitions as you need (the…
Sewing machine presser foot for zippers. Print with sufficient detail in something that will give you good bridging and little stringing, optimised to need no supports. Keep in mind that the attachment bar is not metal so don't just drop…
A battery terminal protective cap with the features I missed on other models I found: “snap” profile to engage with the positive terminal ridge on the nub for the negative terminal to engage with it terminals completely enclosed relief on…
Print in the orientation from the .stl file. It is not a trivial task to get sharp points out of a 3D printer, so if yours come out a bit blunt you could use a nail file (or similar) to sharpen the teeth. Usage: stick it on your roll of…
Pick a star with as many points as pleases you most, affix the LED “neon” ribbon into the channel by the method of your choosing. If you wish to customise - adjust the thickness width or depth of the frame, the outer diameter, the inner…
Use MTB bleed kits to bleed road levers. Print in whatever material and whatever precision give you a suitably well-formed threads, preferably in some material that is much softer than the material of the Shimano road levers. Install a…
Print in something strong (Polycarbonate or ASA or similar), in the orientation the parts are in the model for maximum strength, without supports. Clean up the parts and snap them together, with the teeth on the latch pointing towards the…
This is a shell for a common Chinese spot welder (search for “spot welder 99 gears” on your Chinese marketplace of choice). I did this to try out the “glass” printing technique with clear filaments - it works, but it also takes a very…
Print in orientation shown for maximum strength (layer orientation optimisation), then snap together with the latch orientated upwards. Remove the old buckle (use pliers to break it if you need to), and insert the longer bit of the split…
Print in whatever you like (I prefer transparent materials for this). You'll have to provide a 1.5mm thick piece of wire and press it through the holes to give the foot holder something to hold onto.
If you want to use glue to attach the mount to the wall, print the appropriate model and use a construction type glue (like Pattex no more nails/Pattex kleben statt bohren), or some bathroom silicon. If you are gluing it to tiles, clean…
If you have a cable with an RJ-45 connector with an unprotected latch which you can not easily replace (e.g. a serial RS-232 cable or USB adapter with an RJ-45 connector), you can protect it with this. print in the original orientation…
Print with enough detail to give you sharp(ish) teeth on the model. You can also make them pointier using a crafts knife. Tearing off takes some practice, but works. The model is designed to be slightly loose on the standard tape width…
The provided attachments for the massager are too small to transfer a lot of energy to big muscles, and they are too hard to work near bones. I designed this to take a pad of foam and thus do both tasks - primarily useful for leg muscles.…
Print out in something mechanically strong. You'll have to provide your own camera mounting screw of course, screw into the standard mounting screw most binoculars have in the front (you'll probably have to remove the cover first). You…
A simple shower tray/shelf for adhesive mounting. Use construction type adhesive to glue the support rails to the corner. Make sure they are level, and place the edge of each rail at least 21mm from the opposite wall. The model has some…
A tool to precisely scribe a set dimension away from an edge. Except for your printer, you will need one hex head M5x15 bolt, a hotmelt M5 insert, an M5 washer and some suitable glue. For the scale you will need an inkjet or laser…
Print in something strong and flexible like PETG, ASA etc. PETG would break immediately. This is a wedge to pry off thick bildup of ice in food freezers. You need to work it in between the freezer wall and the ice, which might be a bit of…
Print 5 pieces of slats out in PETG or higher temperature resistant material (there are 5 on the plate in the .stl) and clip them together. It should be pretty obvious how they go together. Look at the photos if you can't figure it out.…
A simple hook to keep wheelsets out of the way on the wall. first hang one wheel (preferably the front one since it's narrower) by the rim on the upper hook, and then hang the knob end of the quick release of the other wheel into the…
Edit the script to configure battery type, number of rows and columns.
Print in something non-brittle (that means: no PLA) and slip two o-rings into the grooves near the edge, like in the photo. Stick on your pole tips to keep them from scratching your stuff during transport.
Print in something stronger (and impact resistant), I used ASA but PETG should also work. Install a hex key into the appropriate insert, push into the cutout in the shaft, make sure it sits all the way down, then put the retainer ring…
A bar of fake USB-A sockets. It is a building block you can use to create your own cable storage. You can stick them under somewhere or design a holder bracket to mount on a wall or whatever. There are (obviously) no contacts in there,…
The MSR™ MicroWorks™ EX water filter allows you to connect a Nalgene™ water bottle and pump purified water into it. If however you prefer Platypus™ foldable bottles, you can't attach them. This adapter allows you to securely attach this…
Print out in the orientation as in the .stl file (upper surface towards the print plate) in a more stable material (PETG, ASA etc.). Screw to the wall in a convenient location and hang your mixer in there.
I wasn't quite happy with the ergonomics of the v1, so I remade it from scratch. Compared to previous version: it's thinner - 18mm wide instead of 20, and it's not as long to allow the fingers to wrap more around it and provide better…
A shroud that fits over the standard double-row pin headers and turns them into a shrouded pin header. It has an orientation notch and should fit standard pin connectors. I have generated and uploaded 6- and 10-pin header shrouds, because…
Print the magazine and the base in whatever you like printing in. Place fresh cells into the magazine through the slot, and remove them when you need them by pulling them out at the bottom. Use the foot to keep the magazine in the correct…
Space-saving upright stand for an electric screwdriver. Print in whatever material or colour you like printing in (but remember, red is faster!), fill with your preferred selection of bits and you're good to go. Screwdriver and bits sold…
My (better, even though I say so myself) redesign of the Lenovo ThinkPad keyboard folding foot. Print with supports (only because of the holder pins) and also clean them up afterwards so they fit in well. Category: Computer
Print in PETG or stronger (ASA, Polycarbonate). Use 4 zipties to attach the holder to your saddle rails (the upper ones through the cutouts in the support rib, and the lower ones around the rail attachment and through the triangle so it…
Also check out the updated version: https://www.prusaprinters.org/prints/145827-compact-metal-saw-handle-v2 Cut the standard handle off (of course ONLY after testing if the new handle fits - these saws look same to me, but it doesn't mean…
print both halves, then pull a 2mm elastic rope through the holes as shown on the photos and make knots at both ends (creating some tension in the process, don't overdo it though). You can optionally glue in some magnets (watch the…
Glue the wallplate to the tiles using a construction-type glue (like Pattex Kleben statt Bohren) and allow it to cure properly (usually 24h). You can then hang the tray into it and place your body care product into it. For ease of…
Print in orientation shown in the .stl file with full supports. Holds a set of spanners from 6 to 17mm in a low profile package, while simultaneously allowing the user to read the sizes. The spanners are also staggered in a way that…
Surprisingly, this tool equipped with a very sharp blade, came without a protective cover. So I made one.
Print in whatever you like to print in. Usage: Hang the narrower part of the neck band into the elastic band of your mask, roughly in the middle (could require some force). This end remains attached to the mask. Wrap the elastic bands…
Parkscheibe zum Selberdrucken, entsprechend österreichischen Anforderungen, mit Viertelstunden-Einteilung und Rastung auf den Viertelstunden. Die Ziffern/Indizes sind erhöht, können also durch einen Filamentwechsel in entsprechender Höhe…
A simple protective plate for your e-reader, usable as-is, or as a plate to integrate in your own cover build. Features include: a hole to install a 3x1mm round neodiddlium magnet for sleep/wake function holes on 4 corners to install a…
The original part is a poor and bulky design imho, which doesn't lock into end position (as it is obviously supposed to) and wobbles around on the tool. This design has a much lower profile and doesn't move on its own, and should install…
To wszystkie aktualnie dostępne wyniki.
