Liczymy pasujące modele…
A quick hatchet job 1/4 inch to hot shoe adapter with a printed thread (the other one I found on here required a 1/4 inch nut which I didn't have on hand). I've used this to adapt a small camera tripod (Fotopro FY-583) to hold a Rode…
This is an iPad holder for the MODX M6, apparenlty it may work with larger M7/M8 models but I'm not certain? It uses the screw indent/holes on the back of the keyboard to clamp onto. The holder clamps on by pressure and uses a separate…
Designed this as I have a bunch of cheap old mATX boards/cpus with stock coolers that I need to test quickly without having to faff about screwing each one down, and this is what I came up with to hold them. Only tested on older budget…
Update (April 2026): If printing serial adapter box, please check the photos to see if your adapter matches the one I have as there seems to be another/new version of it. These are some snap together boxes for the adapter accessories that…
A simple shortened case foot design to let the Thermaltake V21 fit inside an Ikea Kallax or Expedit shelving unit. There is enough room left to put adhesive felt furniture pads on the case feet to reduce vibration and prevent scratching.…
To fit the mount you will require: *M3 50mm bolts x 4 preferably countersunk (45mm should work, the 40mm I had on hand were too short) *M3 nylock nuts x 4 *M3 washers x 4 (optional - should help prevent the nuts damaging bolt holes in…
A simple 10" rack mount for the Asus QG-U1080 2.5g Switch, I've used it in a deskpi rack. There are two pieces, the backing plate is to ensure the router does not move when plugging things in. The backing is secured with 2 x M3 bolts, I…
Simple parts tray, thin 0.8mm walls to make it easy to print with a 0.4mm nozzle. Being so thin, not designed to be particularly durable or anything but will print relatively quickly for its size and not waste too much filament. For me it…
An internal optical drive bay for the Fractal Node 804 designed to be printed on a 250 x 250 build plate. This mod replaces the mesh in the top panel so that you may mount the 5.25" optical drive bay. Designed mostly in tinkercad,…
UPDATE MAY 2026: New V2 model that reduces width 1mm to fit better widthways - there's still a little bit of play so you can get the cover on easy. A dust cover for the Polyend Tracker Plus and Play Plus, I used @GautierAvelin_332015 's…
Update April 2026: I've updated the printable cup holder (use if you do not have the part from the wooden ikea lanespelar one). Now includes cutout for a mug handle, which also makes it easier to screw into the hook bracket.…
This is a power cable tidy wrap for those cheap ebay/China sourced photography/video light stands. Great for keeping the cables from tangling or tripping you up under foot when you put them away. Clips onto the ~24mm grooved pole with a…
This is an under desk/table mount for the Inatech USB 3.2 hub on Amazon. (HB2025 and similar shape models) Designed so that when the backing plate is installed and screwed down there is very little movement/play when inserting removing…
This is an under desk/table mount for the Ugreen CM806 USB 3.2 hub from Amazon. Designed so that when the backing plate is installed and screwed down there is no play when inserting removing USB drives etc. Though this will depend on…
This is a press on fit directional vent for the Delonghi Pinguino Compact Portable Air Conditioner (PACES72CLASSIC) I'd advise before printing this whole project to first print the test piece and ensure it can be attached to the…
Quick wrench design to fit the recessed potentiometers in the Roland MC-307. Unfortunately not a perfect fit (I scaled the hex bit to 11.2mm, very tight but with a little downward pressure it will latch on to the nut!), it will get you…
I found myself occasionally forgetting which way to switch the mouse on at a glance, as the bluetooth and 2.4ghz labels are hard to read. So rather than use a paint pen, I've spent over 270 waking hours and 42.7KG of filament designing…
Apologies for the pictures, we sold the car before I had the chance to take proper photos. We bought a Carpodgo T3 Pro (2024 model) for our old 9N3 Polo GTI to replace a troublesome Carpuride unit, has been a much better experience. So I…
A tiny quick remix/edit of MrFlippant's excellent "Cheap Hex Driver Set Case" design that gives holes for 5mm x 2mm magnets as I could not get 1mm magnets delivered speedily in Aus. Printed with a Bambu A1, I was able to just press the…
Handles to suit black stretch film roll purchased off Amazon AU, brand was TEENGA, 25cm x 150m roll. Carboard tube was from memory either 38.5mm to 39.5mm Internal Diameter - the splined inserts are very hard to get out once in, so I…
Made an updated version of my old Asus 88U 140mm fan cooling stand from ~10 years ago on thingiverse ( https://www.thingiverse.com/thing:2197533 ), this time modular and with option of a 140mm dust filter and USB PWM controller holder,…
Will start off by saying this is designed to fit the Fractal Define Mini C Tempered Glass case, 99% sure it should fit the same chamber dimensions of the normal Define Mini C but am unable to guarantee. I designed this after noticing…
Compact Holder for 2 mini wrenches and 9 x sockets set. The wrenches were available on Amazon AU as “Mtxorvix 2Pcs Mini Ratchet Wrench Set”, but I believe they are generic. The sockets were just a generic socket set. The socket holes are…
This is a microphone extension cable tidy/wrap to use on the Fotopro FY583 103cm small camera tripod. Combined with a Rode Videomic, 1/4 to hot shoe adapter (see link) and a 3m 3.5mm extension cable, this makes for a convenient easy to…
Parts Required: *M5 40mm bolts x 6 *M5 lock nuts x 6 *Super Glue for paddle Inserts *Carbon Textured Build plate (to make paddles/parts look nice.) So after doing a bit of a search to find the right collection of parts which worked well…
The DRX042 gear knob for the TH8S came about after wondering if the look and smooth layer line free feel and look of a Carbon Fibre textured build plate could be transferred to a cylindrical shift knob. After great results printing a thin…
The handle of my Dad's magnifying glass broke off, so this is a clamp to put it back together. Probably nobody will ever need to repair this. This is for the larger version of the IK magnifying glass, around 110mm iirc. The original metal…
To wszystkie aktualnie dostępne wyniki.
