Liczymy pasujące modele…
Holder for regular / standard size automotive blade fuse. I need to print it again so I took some time to I improve my previous remix. Shorter body, fuses can be inserted easier and as a bonus we can easily confirm if fuse is blown or…
2026/03 update: Resize holes so screws can fit and grip better. Added new models for XL4005 and other variants. It's 1mm longer and have different board screw position. ===== 2024/12 update: Added a new v2024.12 with these changes: Even…
Scaled up nexty's 18650 battery spacer to accommodate 32650 battery size. I need just a few spacers for my LiFePo4 12v pack so it make more sense (and faster) to print it than buying on ebay. The dimension of this spacer is: 35.8mm x…
2025/10/17 v4.0 Update: Make the ridges on the cap smaller so it would close shut without bulging. ----------------------------- 2024/10/09 v3.0 Update: Add ridges to the cap so it won't pop out. Enlarge trim-pot holes and merge them…
A small but full-featured panel mount for Anderson Powerpole (15, 30 and 40a version). Come with a cutout template so you can use it to mark where to cut and drill on your panel. There's a hole in the middle for securing Powerpole…
Added strain relief feature to the original design. The case is longer to accommodate zip-tie, but it's pretty minimal (4mm longer). Need re-orientation, but can print without any supports. Printing filament: Original designer called for…
2026/01/26 update: Added dual stack mount to mount 2 module at once. Remember to cross the wires as the are mounted opposite with each others. ===== 2025/10/15 Update: A user asked for source Fusion360 file so I've added it. ===== I…
Changes in this remix: Removed bay for 9v battery to create space to add a 18650, TP4056 charging board and boost converter board. Make the opening for power switch smaller to use with my switch. (from 12.9x19.5 to 8.8x13.6 opening)…
I had to loosen heat bed's spring too much for it to touch the nozzle, which doesn't help with overall stability of the bed so I remixed a shorter bracket from tichoh's. Shorter brackets are in 40, 43 and 45mm length, just print one that…
Customized Arcachofo's Universal battery holder with jag's Dovetail module to create this 20700 holder. Now you can customize it and combine multiple parts to create a gigantic battery bank if you want. Some other tweaks added: Chamfer at…
I like how the original design expose heat-sinks for better cooling, while remain pretty sleek. I remixed this design to: Make it a bit longer (a few mm) since the original didn't fit my 300w XL4016 buck converter board. I think the…
I wanted to design something to hold a pole on top of my picnic table and found falconphysics' V-Groove Table Clamp to be the closed to what I had in mind. Remixed it a bit to suit my need: Chopped off the top part. Change size of the…
Original model was very well designed, however I have reservations about having it completely enclosed with 65w output so I added vents to the top. Because of the added vents, its labels can no longer be on top so I also moved that to the…
Remixed the CoolDPS case. Change log: Customize Boost converter support to use the 150w boost converter I had laying around. Add more vents above boost converter. Change front and back panel to use DC jacks and Anderson powerpoles (I have…
This is a case for400w, 15a, CC CV boost converter board using TL494C chip. Features: Completely expose heatsinks for better cooling. Add access to all trimpots, screw terminals (and fuse). Cover all exposed leads on the back of PCB. No…
Case for CTP01 QC3 board (9v 2a 18w max). I designed this case with some space at the back so you can tie a knot to act as strain relief. The weird design of the lid is because I want it to push the board and keep it in place inside the…
2025/12/07 update: I've added a case with cutout for KCD11 button to cutout input power. This was created because in cutoff state it would still be drawing some current for the internal converter, relay and display which is not optimal…
Couldn't find an Amass XT90 panel mount that had all my requirements so I designed this based on ideas from my previous XT60 remix. My aims for this design: No support needed. Can be used for both Male and Female connector. Can be removed…
I find the single screw doesn't create enough force to clamp XT60 connector down so they always slip out with enough force. I've created this remix using zip-ties which hold it in place for sure. Modifications: Removed screw, added holes…
Simple adapter for my battery operated Coleman pump. There are 3 test models: top test: The top is small and require adequate cooling. try printing this to see if your fan speed % is good enough. 24.8 and 25.2 base test: Print these out…
I've printed quite a few other single cell holder, but all of them left something to be desired. The ones with 3d spring either doesn't have enough force or its will get weaker with use. Some use hardware that's hard / troublesome to…
Remixed the best AAA to AA adapter I know on thingiverse to an AAAA-to-AAA adapter. Remixed details: Size (obviously) From 4 slit to 2 slit. 4 slits is too much retraction for a print this small. Include a solid version without any slit…
2026/03/12 Update: Added v7 for newer, cheaper copies of the board without mounting recess. ===== This case was made for the base model of this U1E 65w Type-C PD board with solder points. It's a tight fit with the groove, so consider it…
Remixed to panel mount to use with my battery pack / solar generator Category: Electronics
I'm making a macro keyboards but most designs are for MX switches while I have these tactile switches laying around so I designed an adapter for it. The macro keyboard design used with this adapter was Raspberry Pi Pico Macro Keys by…
Panel mount for SW3518 / SW3516 Type-C PD board panel generally found on Aliexpress / eBay, with a cutout template to cut your panel. I used this in my Powerbank / Solar generator build. You can install the module in any order: before or…
Ceiling hook to hang Oculus Rift's wire with dog leash or extendable name tag holder. It could be use for other purpose though. Prepared STL specification: Length: 52mm Width: 18 mm Hook diameter: 4.4mm These dimensions were chosen to fit…
Remixed the model with these changes: Make the end larger to accommodate my 8AWG cable which seem to have thicker insulator than other 8awg. Added hex nuts on the other side Make 3 different versions for standard Amass XT90, Sparkless…
A customizable door holder inspired by this design: https://www.thingiverse.com/thing:946304 I've design it from scratch using OpenSCAD, so you can use Thingiverse's customizer or change the OpenSCAD file yourself to suit your own door.…
The original spot welder pens that come with my new AwithZ UF20B spot welder is a bit unwieldy due to its size, the one-handed pens that can be used with it (WP-240) is not very available hence this design. This help with having evenly…
2025/12/08 update: Increased tolerance by 0.2mm so the board can be installed easier without having to use force. ===== This is the panel mount designed for AJ27-TIE 24w QC 3.0 USB module. They have a variant with 2 ports side by side,…
This is the longer version of my other design to accommodate the addition of cable strain relief. I also moved screw holes to secure the board outside because its position change with every batch I bought.This is the longer version of my…
All credits goes to kmbs, I just rounded the "B" edges to make it easier to slide in and out of the lid. Also, the default dimensions in my OpenSCAD files are for the Astage NC 25 box. Print Settings Printer: Raiscube Rafts: No Supports:…
Extra Fox did a fantastic job designing the case. I like it the best among Atorch DL24 cases I found. I ordered the set with Battery box (battery testing board) so Riko's remix was helpful, but I didn't like how it cut out too much,…
The original was nicely designed, but I didn't like how the screws head protrude out of the case so I've made this very simple remix: Enlarge main body's holes so you can use M3 screw directly (original design had the holes too small I…
A simple Fusion360 parametric enclosure for PCB or modules that have 2 or 4 screws holes. Features: Print without support Have input and output opening for wires Can be customized to fit any PCB or modules with mounting holes, using only…
Remixed my own design to add space for a diode. This is useful for cases where you leave the buck converter connected to a battery all the time to prevent current back-flow. Category: Electronics
Update 2026/08/11 Added slim profile for single mount and change screw position on dual mount to be compatible with this new slim profile model (meaning you can switch between them without drilling new holes) ==== Recently when buying…
Safety cap for XT30 male / female connector, with a wire loop so you won't lose it when removing for use. The loop is large enough to go through an XT30 connector so it can be added after soldering. Printing material: TPU. I haven't…
Changed some parameter on my customizable mechanical relay case to fit this OMRON G3MB-202P 240V 2A solid state relay. The top columns is a bit hard to print so it might not come out looking very good, but once you closed the case it…
2025/01/27 Update: After using this design for a while, I realized it's not a good idea to use it upside down because the weight of the remaining tissues will make it much harder to pull a tissue out. Please use this newer design instead:…
Case for XM74610 ideal diode. There are 2 versions: Top wire (Orange in picture): for when you solder the wire on top of the board. Slim and have no hole for heatsink. This diode should be good without heatsink up to 6-7a in my testing.…
This is a case designed for 24w USB QuickCharge modules such as MH-KC24 or AJ27-TIE. Please note that the modules use similar component but have different size: MH-KC24 board are smaller at 17x34.5mm while AJ27-TIE are bigger at 19x38mm.…
2026/01/10 Version 2 update: Make the part without hook a bit longer so it's symmetrical with the other part, improving aesthetic as well as making sure it's long enough that the tissue box doesn't slip out. ===== After using my other…
A new remix of my old Mini blade fuse holder remix. Changes: Added slot for M3 nuts Improved, longer wire curve so it would not cause excessive strain on the wire Split into 2 versions: for M3 machine screw with nuts and for self-taping…
Both my laptop and amplifier are powered from the same DC source, causing high-pitched noise from a ground loop created by this setup. To fix this I bought this isolated DC-DC converter and designed this case for it. If you read this and…
This model turn a normal potentiometer into multi-turn potentiometer, because some time you want to make an enclosure for a board that come with trimpot, but adjusting trimpot is a pain and multi-turn potentiometers are expensive. Re-use…
All credits goes to CyberCyclist. I just fill up the holes in his screw version for those who want to use Command strips to avoid damaging their wall. Update: Tested with my Rift CV 1 and it fit perfectly, so I updated the name to reflect…
Merging the Cable tray made by ftobler with the idea of using stampler instead of screw to minimize damage to drywall from CyberCyclist , I've created this Thing. You can use this to hang various type of USB cable and other electrical…
Improved upon Heartman's design by adding the ability to add label and cutout panel to the back of the box, for power input, audio in or power button. Of course you can customize this design for bigger box just like Heartman's When…
Panel mount for IP2369 45w bidirectional buck-boost module. I've created this with enough space to install heat-sink on bottom of the board. I use these board for my smaller 3s and 4s battery packs to be able to get 20v without an…
Created this to convert my 14500 to 18650 size to fit in my capacity tester without using bolts as terminal. The only hardware needed is a short 7 or 8mm wide nickel strip.
Easily customizable remote holder. You only need to change 6 parameter to fit your remote: height: the length of your remote, minus maybe 10-20mm to leave part of the remote to pull out length: the width of your remote width_open_end: how…
Modified original WZ3605E case to fit my need by merging it with my other designs such as XT60 mount and Powerpole mount. This design have: XT60, Powerpole, DC barrel jack (5.5x2.1mm) and USB Type-C as input options. Powerpole, DC barrel…
Very minor remix of original model. I just cut open input and output terminal so the wires can be installed before screwing this housing in making the installation easier. I also opened additional holes to see indicator LED lights and…
A no hole remix, for those who don't want to damage their wall and use Command strips. Category: Video Games
This DC kettle I bought have its cord attached to the kettle making it quite a hassle to move around. I replaced the cord with an Anderson power-pole connector using this print. Other hardwares needed: 3mm screws (x2) 3mm nuts (x2) There…
Simple hook to hangs things on the wooden beam in a Japanese room without drilling / screwing into the wood. It have a small latch with flexible arm at the bottom to make sure the hook doesn't come loose when you remove bag / items.
Panel mount for push connect barrel plug. It's not normally intended to be mounted on a panel, but sometime you run out of the right part and want to finish your project. An advantage of this design / plug is that it secure to the panel…
PLA wheels don't have any grip so I've create this simple remix to address that. Print Wheel_with_bearing_wo_tire.stl in PLA as normal Print Wheel_with_bearing_tire.stl in TPU. This can then be slipped onto the…
I wanted to use this 433Mhz remote control relay with 30v, but it need 12v to function to I created this case to house it and an LM2596 buck converter. (LM2596 module will only convert to 12v for control, while output voltage stay the…
I wanted a basic, but universally usable enclosure for electronic with a fan so I made this. It's customizable to from the attached Fusion360 file so you can customize it to your need. What I wanted with this design: Can screw in every…
A compact case that is only as tall as the module itself while having all the input and output I need. It's in 4 part to make printing and assembly easier since it have so many connections. It's a bit flimsy while being assembled, but…
Case for SwitchBot Smart Lock Pro battery. Just use a small Lithium-ion battery with 1S BMS and you will have a working battery. I used salvaged vape battery + TP4056 for one and salvaged handy fan battery (already had BMS attached) for…
Added 'want_post' parameter to generate holder separated from alignment posts, and increase height to 130mm to suit my printer's need. Measure your printer's X carriage height after homing and add about 10mm for clearance. You won't need…
A very simple spring guide, keeping your bed spring from jumping around and also add tension to your spring (could be a good or bad thing depend on your Z-Stop setup). You can use customizer or edit the OpenSCAD file directly to change…
Case for 10a 250w CC CV Boost converter with cable strain relief. Can be printed without any support. You will need 4x20mm M3 standoff and 8x6mm M3 screw (4mm and 8mm length are ok too). Case was designed as counter-sunk for support-less…
I bought this IKEA LIDKULLEN chair to use when playing VR, but its legs are small and hard so I designed this protector to protect my wooden and tatami floor from damage. It's in 2 parts: Inner shell printed in PLA: if you don't have TPU…
It's going to be summer soon and I need sun shades for my smartphones when I set them on my dashboard for navigation. I designed this to be printed in 2 parts: stand and shade. The stand is quicker to re-print so it's designed to break…
To wszystkie aktualnie dostępne wyniki.
