Liczymy pasujące modele…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) I designed this travelcase, so i can securely take my trusty oneblade with me on vacation. works with magnets size: d6x3; d5x4; d5x3; d5x2;…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) I designed this travel case for my shaver, but it might fit yours as well. in addition you will need 8x d6x3mm magnets and can glue to hold…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) I remixed this part, because the original was great by design, but was missing a strain relief. so here it is. also use the original or 18mm…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) Hello 3D Printing friends. The idea for a filamentcutter arose after i installed an ERCF on my Voron 2.4. But none of the existing could…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) This is a simple holder for the detachable turntable for an Anycubic W&C 2.0 . It may fit other plates with 140mm diameter and 4mm thickness…
If you like my parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) Please take a look at the newest version of this cutter This is an evolution of my Dragonburner-filamentcutter. This Model is not fully…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) i didnt like to freely align my pei sheet, since it was never perfect and my self diagnosed ocd was driving my perfectionism crazy. hence i…
I was on the search for a backplate for the ender 3 V2 for the final release of the stealthburner. since i couldnt find anything, that satisfied me, i found some other .step and made this backplate. it fits E3 (not tested) and E3V2…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) You will need 6x to 8x M5x8 BHCS and fitting hammernuts. print it in someting ridgit like PLA or ABS or any cf material, i think PETG is just…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) This is a very basic runoutsensor for your thumperblocks. Up front you should only do this with a fresh build. otherwise you have to remove…
This is a nice model to test your printer for tolerance. the space is .3mm around. the gears should move freely. you can also test your bridging capabilities of your printer, because of the short connector on top. i had to wiggle the…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) this is a quick print to save your cats from getting stuck in tiled windows its modeled after some wooden brackets i found on amazon, but i…
This is a solder wire holder, it does one thing very good: holding solderwire . just print out a body and a pin and put them together, there is no magic. The pin should fit with sligth pressure to keep the roll from falling out. If none…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) this is a carrier, that you can simply clip into 1515 extrusions found on Voron 0 for example. i made 2 lengths 60mm and 120mm. you should be…
Hello Speedcubers, this is a case inspired by the Moyu case i got with my 3x3. My 4x4 though didnt come with a case, so i printed one just like for my 3x3. While i was at it, i made it configurable, so any cubesize (the limitation of…
This is a very simple bracket, where you can zip tie the CAN cable from a ebb36. You need: 2x M3x12 BHCS 2mm wide zipties. 1x bracket and 2x spacers 4x voron standard heatset inserts
i liked the idea of the bambulab nozzlewipe for 2020 extrusions. this print is a remix by Metapher . for more info on the macro and stuff check the original part. this one is just a bit taller and uses a piece of PTFE (14.5mm) as wiper…
its just that.. a cookiecutter of perry the platypus.
I designed this travel case for my shaver, but it might fit yours as well. in addition you will need 8x d6x3mm magnets and can glue to hold them in place. I also put some foam tape on the top shaft part, so the razor doesnt slide around.…
This is a little spacer, only 8.6mm thick that has regular sherpa extruder mounting pattern. it is used as sensor between a toolheadcutter and extruder to see if the cut has been successfull. This design is fully exclosed and uses a 6x3mm…
This is a small toolholder, that uses one M4 Wood screw with up to 7mm head diameter.
i made this in addition to my exhaust fan filter to direct the air outside, where im going to design an attachement for a vent system in the future. this duct replaces the exhisting carbon filter, which is useless anyway. it reuses all…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) If you like this one check out my even smaller runout sensor This is a very small inline Filament runout sensor for PTFE Tube. Print in…
this is a doorswitch, that can activate whatever you like. the ideas are endless, maybe use it as lightswitch or as door detection. Print them as they are provided, maybe with a brim. you can mirror it for the use on the right side. BOM:…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) Hello, here you have a tiny runoutsensor. this is the smallest i could get them. You need: 2x ECAS4 without rubber part 1x 6x3mm magnet 1x…
Simple rapidburner mount for ridgid cartographer probe. you need no special parts for this. Offsets are: x_offset: 0 y_offset: 28
This is a thing i remixed, to add some supportbraced to my belted z mod for the Ender 3. (https://www.thingiverse.com/thing:4243512) you dont need to rotate the stl, they should be correctly oriented, but you will need supports enabled. i…
This is a very compact design for a 5 button macro board, that requires a bit of hardware you might have laying around Printsettings: 0.2 or 0.15 layerheight at least 2 walls each at least 6 top and bottom layers 20% infill Material: PLA,…
This 3 Part design keeps my microphone away from the desktop. ita not ideal, since the mic is fairly far away from my mouth, but i use it for discord and calls only anyway. BOM: 4x m3 heat inserts AND nuts (heat inserts go into the…
this is a small retainer, that keeps sliding things from sliding. The ‘eyes’ are for longitudinal adjustment. you will need 2x 3mm woodscrews for each piece. Either print left or right, or both for your project. Works with ABS. PLA might…
I designed this adapter/holder that you can add to the top of your Anycubic wash&cure 2.0. Hardware and tools you need: 2* M5x30 SHCS or BHCS 4-6* M3x10-12 SHCS 4-6* M3 heatinserts short or long should work 4.2mm drill M5 tapping drill…
To wszystkie aktualnie dostępne wyniki.
