P
PrintablesMeganoodle
Simple crochet hook
Just a simple crochet hook, can increase size within slicer if needed, 20 minutes , less than a metre of filament. 0.2 res No adhesion No support. 20% or above infil.
- Pobrania
- 2276
- Polubienia
- 270
- Ocena
- 4,77
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesMeganoodle
Spool Gauge
Hook it onto the edge of the spool to measure what filament you have left, wouldnt say its accurate but gives a fair indication on what is left. Ive made 3 versions length (metres) weight(KG) and Percentage(%). Fairly quick to print 30-40…
- Pobrania
- 935
- Polubienia
- 243
- Ocena
- 4,75
P
PrintablesMeganoodle
Sinden Lightgun Holster for Arcade
Holster for the amazing Sinden lightgun. I wanted a holster that I could grip and wrap my finger around the trigger as I pull it out of the holster. This achieves that and it holds the gun firm and tidy. I still need to work out cable…
- Pobrania
- 707
- Polubienia
- 44
- Ocena
- 3,5
P
PrintablesMeganoodle
Corner plate for 2020 Extrusion
Corner bracket for reinforcing corner joins on 20x20 extrusion, can be used to add to the bear frame. I printed this with petg, 0.2 layer height , 30% infill 2 walls
- Pobrania
- 320
- Polubienia
- 36
- Ocena
- 4
P
PrintablesMeganoodle
led channel for ws2812b led strip
Two methods for fixing the channel , holes along the center, and tabs on the side, these are 190mm long. I printed these in PLA, flat on the bed with supports everywhere, might get away without supports I didnt try. The led strip I used…
- Pobrania
- 317
- Polubienia
- 45
- Ocena
- 0
P
PrintablesMeganoodle
Baby Groot themed incense stick holder
The wife asked me if I could build an incense burner for her , she didnt state a theme , I see it as the designers prerogative, being a marvel fan I thought I would base it on Groot. Sculpted the head in blender (first time using the…
- Pobrania
- 281
- Polubienia
- 41
- Ocena
- 0
P
PrintablesMeganoodle
3d print chisel
Remove stubborn 3d prints with the chisel, can be used with the pencil mallet in my profile. Sometimes even when you wait for the bed to cool , some prints still dont seem to want to let go, so I made this and the trusty pencil mallet, to…
- Pobrania
- 200
- Polubienia
- 16
- Ocena
- 5
P
PrintablesMeganoodle
Badgify parametric badge constructor (Openscad)
Badge / sign configurator written by Lee Goodman AKA Meganoodle. Please feel free to adapt and improve the code but please add a nod to me in with the credits, I would like to see any improvements made to it too so please share it here.…
- Pobrania
- 162
- Polubienia
- 16
- Ocena
- 0
P
PrintablesMeganoodle
Parametric filament spool turntable
Use an empty filament spool to create a simple turntable. Just tap in the measurements of the empty filament reel and print. You will need to print 1 x top plate and 2 x inserts. you will also need to purchase some bearings like this.…
- Pobrania
- 145
- Polubienia
- 30
- Ocena
- 5
P
PrintablesMeganoodle
Pencil fly swat
Add the fly swat to the end of your pencil and bat away those pesky flies. will need supports (touching plate) 0.2mm, 20% Infil, no adhesion.
- Pobrania
- 137
- Polubienia
- 51
- Ocena
- 4,5
P
PrintablesMeganoodle
Flexible camera mount for Ender 3 Pro
Raspberry pi camera mount with the use of the flexi arm from here https://www.thingiverse.com/thing:4212206 This is made for my Ender 3 Pro , but i assume it will work on the rest of the Ender 3 series. It clips onto the X-Axis stepper…
- Pobrania
- 133
- Polubienia
- 19
- Ocena
- 5
P
PrintablesMeganoodle
Raspberry PI IO Shield & Mount
Trying to build a file/media server. It all works , I just needed something to house it in. I decided to use an ITX-Mini case, and a raspberry pi 4. But that left me with a small problem, the rear IO panel cutout. After hunting for…
- Pobrania
- 118
- Polubienia
- 10
- Ocena
- 0
P
PrintablesMeganoodle
Soap Chest (soap dish)
My first print in place attempt, which seems to have been successful. The print will need support, I found the support material was quite difficult to remove for some reason , not sure if it my slicer , printer or the nature of the model.…
- Pobrania
- 117
- Polubienia
- 19
- Ocena
- 0
P
PrintablesMeganoodle
8 minute cable tie
Cable tie prints in 8 minutes , can be released if careful. Release tab added to pull back carefully to open for re-use. 0.2mm resolution, 15% infil, no support, no adhesion.
- Pobrania
- 112
- Polubienia
- 36
- Ocena
- 4,43
P
PrintablesMeganoodle
Case for Intel NUC5PPYB with Home assistant themed lid.
After endless searching for a case for my NUC, I decided to make my own. through a lot of trial and error Ive come up with this very simple design. The computer is fastened to the pillars inside with m3 self tappers , they only need to be…
- Pobrania
- 98
- Polubienia
- 7
- Ocena
- 5
P
PrintablesMeganoodle
Openscad Compartment Tray Configurator
Enter width, height and depth, wall thickness and number of compartments in the x and y axis, render and export. You can either enter it in the customizer ([view] → uncheck [hide customizer]) or adjust the constants in the first 6 lines…
- Pobrania
- 97
- Polubienia
- 16
- Ocena
- 0
P
PrintablesMeganoodle
Rotary Encoder knob Tie Fighter
Tie Fighter rotary encoder knob, just made this for a bit of fun and to see how it would turn out. Would probably look better in a lower layer height this one was printed in 0.2mm at 20% with supports touching base only. Its a snug fit to…
- Pobrania
- 93
- Polubienia
- 30
- Ocena
- 4,33
P
PrintablesMeganoodle
Ergonomic Rotary Encoder 3 point Knob
Originally designed for a different project (currently in progress, which might get posted here at some point. PS. Ive added some teaser photo's for illustration ) So I made some alterations to the knob and here it is. It fit nicely…
- Pobrania
- 91
- Polubienia
- 9
- Ocena
- 4,5
P
PrintablesMeganoodle
Raspberry pi 4 spectrum case
I grew up with a C64 , but always wanted a Spectrum also, I had one as an adult since, but wanted to create one for myself using an emulator and a raspberry pi. Then I thought why not have it emulate everything the pi is capable of , so…
- Pobrania
- 88
- Polubienia
- 14
- Ocena
- 0
P
PrintablesMeganoodle
Fitbit Inspire HR charger stand
Prints on its side , no supports or adhesion. 0.2 resolution 20% infill. The charging port fits nice and snug in the oval hole, set your watch on top and no more having to balance your watch/charger hoping it doesnt get knocked and…
- Pobrania
- 81
- Polubienia
- 7
- Ocena
- 0
P
PrintablesMeganoodle
Tiara with parametric openscad Included
Use the pre-made stl files and print directly or use the parametric openscad file to create your custom sized Tiara. The openscad only has a few parameters, as follows: Diameter: as described this is the diameter of the tiara. fn: This is…
- Pobrania
- 76
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMeganoodle
Shopping list fridge magnet (print in place)
Shopping checklist for basic staple foods. It is print in place, but I had to use supports , only to support the tags down the edge. From the top the Items in the list are Milk, Sugar, Butter, Eggs and Bread. Just incase my illustrations…
- Pobrania
- 61
- Polubienia
- 51
- Ocena
- 0
P
PrintablesMeganoodle
Modular Rotary Encoder knob 3 part (traditional design)
There are parts to this knob: Insert, cap and body, they are straight forward to put together. Fits most standard rotary encoders , fits on my ender 3 pro , just a bit of pressure and a wiggle and it should slide on. If you are having…
- Pobrania
- 50
- Polubienia
- 9
- Ocena
- 0
P
PrintablesMeganoodle
Corner Block for 20x20 Extrusion
Corner Block for 20x20 Extrusion can use with bear frame upgrade. Corner block to help reinforce/stabilize extrusion corner joints. Printed with petg, 30%infill, 0.2mm layer height Added corner block with 1 edge rotated 90 degrees.
- Pobrania
- 50
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMeganoodle
Pencil Mallet
Another tool to attach to the end of your pencil, or anything else similar. I find it useful to use this with a printed chisel to remove stubborn 3d prints from the bed. The chisel also can be found in my list of models. 0.2mm resolution…
- Pobrania
- 47
- Polubienia
- 10
- Ocena
- 0
P
PrintablesMeganoodle
Rotary Encoder knob Gear Style 2
rotary encoder knob traditional gear style. Fits well on the ender 3 pro and it should fit on most standard rotary encoders 0.2mm / 20% / supports touching bed
- Pobrania
- 43
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMeganoodle
Extrusion brace connector 45 degree
Made this for my work bench to give some stability to the backboard, after mounting the backboard is pretty sturdy, Im sure there are other uses for this adapter hence why I am sharing. There are 2 models one is mirrored from the other if…
- Pobrania
- 38
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMeganoodle
Sharpie Station with SD card and USB stick storage.
Organise your sharpies with this organiser. Easy print, I done this one in 0.2mm haven't tried other layer heights or thicknesses. 15-20% infil , no supports. Note I printed a 2nd one for my Daughter and the SD slots were a little tight ,…
- Pobrania
- 31
- Polubienia
- 7
- Ocena
- 5
P
PrintablesMeganoodle
Sculpfun S9 Adapter for Laser Engraver 15watts by infectedfpv26
After building the laser engraver by infectedfpv26, I found the Sculpfun S9 on Bangood was on offer, so I bit the bullet and purchased it. only thing then , of course the laser mount was incompatible with the S9 so I designed this.…
- Pobrania
- 30
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMeganoodle
Rotary Encoder knob Gear Style 1
rotary encoder knob traditional gear style. Fits well on the ender 3 pro and it should fit on most standard rotary encoders 0.2mm / 20% / supports touching bed happy making
- Pobrania
- 29
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMeganoodle
Princess Palace Desk
A simple princess palace desk for my Granddaughter. All the 3d printed parts are in PLA resolution 0.2mm I done most of it with 30% infil but could probably go lower. The window diffusers are in a transparent PLA filament with a low infil…
- Pobrania
- 26
- Polubienia
- 23
- Ocena
- 0
P
PrintablesMeganoodle
ITX Case Interchangeable Front panel
Wanted to create a themed itx case, but then decided maybe create a modular case which different front panels can be used. After a lot of research and scanning schematics of ITX motherboard layouts, and (trial and error), I have finally…
- Pobrania
- 23
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMeganoodle
Pointy Rotary Encoder Knob
Fits well on the ender 3 pro and it should fit on most standard rotary encoders 0.2mm / 20% / supports touching bed happy making
- Pobrania
- 22
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMeganoodle
Ergonomic 3 point rotary encoder knob (Curved)
Another control knob pretty much the same as the previous knob posted but this has a curved top, which in my opinion is more pleasing to the eye. Shaped with the same ergonomic design. 0.2mm / 20% / supports touching base only. Added (V4)…
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMeganoodle
Meganoodle Pot
A little pot based on my avatar, If anyone is interested Ive uploaded individual pieces so it can be printed in different colours, and two variations of the complete model , on with cape and one without. Printed with 30% infil , 0.2mm…
- Pobrania
- 13
- Polubienia
- 8
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.