Liczymy pasujące modele…
Update_2: I have added a 100mm bracket for 2020 aluminum extrusion for my new Voron2.4, which should be compatible with most printers that use 2020 extrusion. I printed the bracket with PET and it has been running for somewhere about 60…
This is a remix from https://www.thingiverse.com/thing:4745565 (by Hodgepodge_Foxe). Thanks to Hodgepodge_Foxe for providing the f3d files: "Somewhere up in the 3d printing heavens, there is a choir of angels 2000 deep singing praise to…
I need a stand for my hair dryer to keep it off the countertop from getting wet or scratching the surface. But I have trouble admiring the stand design by Dyson or anything like that. They displayed all the attachments in front of me,…
Added some extra material to the connection to make the swatter stronger.
For Voron 0 it's almost impossible to add a standard M3 nut to the 1515 aluminum profile slot without taking something apart, but not M2, so I made this. This design doesn't hold the nut in the slot, the T nuts will drop when the profile…
I designed this printable chainstay protector for my Aventon Level 2 e-bike because the bike does not come with one. After just two rides, I noticed that the chain was damaging the paint on the chainstay. The Aventon Level 2 has a very…
I want a single-row organizer that can fit in all the Flair Pro 2 accessories, so I made one. There are three versions: A four-segment split that can be printed by a small printer, connected with printed tabs. Print all 4 parts and 6…
*** Something new: The new one works even better. Suitable for bathtub with Lift-and-Turn Drain with a diameter of 45 mm. Lift-and-Turn Drain will leave a non-removable stake in the center after removing the top stopper, this hair catcher…
Update V2.1 @ computer22 Raised the issue of the loose charging cable slot, and I have to say he is right. To avoid reprinting the entire base, I made this wedge, print two, insert and press them down tight. To remove, push them out from…
Trying to make a case for my new needle files. I am looking to design the case to be simple, reliable, and compact, with a see-through lid and easy access to the files. Not a big fan of including a hinge, I've done something similar, the…
The OD of the original spool shaft is 7.95, so why not? Bearing: 608RS*2 Pros: ·Compatible with spools with an inner diameter of 50mm to 55mm. (I measured several filament spools from different brands I own) · Compatible with spool up to…
*** My new design, compatible with more spools:: https://www.thingiverse.com/thing:5386608 This is a bearing filament spool holder designed for Voron v0.1 to replace the PTFE tube holder. (Can be used with any frame built by 1515 aluminum…
This filament dryer is designed as an efficient, reliable, easy-to-build, low-cost, and environmentally friendly solution for drying common 3D printing filaments such as TPU, PLA, PETG, ABS, Nylon ASA, PC, etc. Provides differentiated…
This is the coffee distributor I prepared for my Flair Pro 2. Adjustable height 7 mm~12mm I have seen some videos mentioning that using a coffee distributor before temping can get a more leveled coffee bed. In any case, 46mm coffee…
The grey PLA looks great with the dispenser.
The default headlight on the Aventon Level 2 Ebike is mounted on a small bracket that fits with the stem cap. After I swapped out the original stem for a longer one, the original bracket could no longer be used. So, I created this…
This is a remix of the classic TUSH. With the following changes: · Downscaled, allowing 120x120mm machine (e.g. Voron 0.1) to print. · Adjustable and lockable rails. Assembly: · Four M3×5 or M3×6 screws and nuts. · Four M3 screws with…
Simple design solves simple problems, adding side walls to prevent falls caused by accidental bumps. Inner footprint: 97mm x 97mm. One No. 8 screw to hang; Two screws gain stability; Three carpentry screws are overkill. Use any kind of…
I designed this Jack footplate for my Nucamp TagXL because, instead of finding a few pieces of wood or buying a generic one, I wanted to create something with a bit more character. This design fits jacks with an tube inner diameter of no…
A stepless angle bracket for mounting 6015 COB LED strip. This is a component of an ongoing project, for providing adjustable LED light sources. However, I think this can be practical in a variety of cases, the two M2 holes in the base…
I have experimented with several existing designs, but I wanted something different, so I created one: - No contact with the inner bottle or the inner wall of the cap. - No supports, adhesives, or fasteners are needed. - Press fit…
I made this to eliminate the wobbling of the office shelve whenever the microwave is in use. Large contact area prevents dents on the dry wall. Attached to any surface with double-sided tape. Usable spacing range: 0.85–1.25 inches. (Do…
This printable mounting bracket is designed for hanging a 1.9~2.3 mm panel on the wooden frame with some M1.7 self-tapping screws to avoid drilling holes on brittle materials (polycarbonate, acrylic or glass). The small size allows it to…
I made this part to replace the original fan duct, because the original fan duct cooling effect is not good. I tested the original fan duct, although the original fan is not weak, but the cooling effect is still not good, because most of…
From the moment I assembled the machine, I really didn't like the way the cable above the extrusion head was always tilted. So I tried to modify a few PCB covers that I can find on the website, but I found that they all don't match the…
I designed this little plug-in to prevent my PhoneSoap 3 from entering the 10-minute sterilization process after taking the phone out. Support needed. Use a piece of filament as the hinge shaft, or two M2 screws. Not sure if it's…
To wszystkie aktualnie dostępne wyniki.
![TPU/PLA Bike Chainstay Protector [Designed for Aventon Level 2]](https://media.printables.com/media/prints/910939/images/6960035_d2154b2b-50fd-4fb9-b68c-ecaf6ecbb1b8_4f84104e-0cb4-4e69-8d21-d9fa053aa65f/image_20240612170641.jpg)
