Liczymy pasujące modele…
This is a triple quad planetary assembly that prints well on my Voron using the STLs. I run everything on Linux and it seems this Printables web system alters all uppercase letters in FreeCAD file suffixes to lowercase. You'll need to…
This has fairly tight clearances and comes off the build surface ready to go. I have had one print where the gears need each to be gently pushed downward to the square base to release them from the pins. I have uploaded a second STL…
The cam mount is designed for an OV9732 1MP Camera Module 100 Degree MJPG/YUY2 Adjustable Manual Focus 1280x720 PCB Board with 2m cable for WinXP/7/8/10/Linux.…
This is an old design brought back to life to live again using the new FreeCAD Integrated Assembly Workbench. I originally made this using the Part Design, Gear and the Assembly4 Workbench. I hope you enjoy this Planetary and learning and…
Why another new design: I couldn't find a Bee Waterer that fit any bottle properly. Don't worry though, you don't need a $1400 printer to make this. Even a $190 Creality prints this beautifully using the stock default files and directions…
I want my Voron AWD to be quiet so with it slowed down to 250 mm/sec, accel turned down to 8000, 15% gyroid infill using a 0.4mm nozzle and 0.3mm layer height, the print took just under 3 hours. The planetary operates smoothly right off…
These CANBUS mounts use a 0.5mm or 0.64mm rod. I used a 0.50 mm rod but I may change it to 0.64 mm to remove a little of the lean :-) These will allow full unrestricted movement with a raised chamber height. The cable bridge is a modded…
This is a modified G2E Cable Cover with Voron Logo for venting. You may also be interested in my other Voron Trident mods shown here or at https://www.printables.com/@JimChristian_3198049 &…
I have opened up the clearances at little so that my Ender3 S1 and V3 SE can both print out working planetary. The clearances are too loose for a modern highspeed printer like a Voron. For my Ender printers the planetary still operates…
This is a top hat for a Voron Trident 300 that I'm calling an Ascot because of the jaunty angle ;-) . This gives extra height for an umbilical setup in the rear yet allows a complete unobstructed view into the chamber while standing in…
I made this antenna mount for my printer after a few days of it banging around inside the wiring cabinet. I did consider mounting the antenna underneath and also inside the inverted wiring cabinet but I didn't want to forget it was…
This is a FreeCAD design of a Dodecahedron. I used the Part Design and Spreadsheet workbench to create it and included the FC design file. Enjoy. You may also be interested in my other Voron Trident mods shown here or at…
This Voron / Trident Bowden Tube Guide may be useful for printers with Tophats where the original guide may no longer fit. I've also included the FreeCAD file from my Version: 1.1.0dev.41870 (Git) build. You may also be interested in my…
I was missing a subassembly: invol-assem4-plan-9-7-23-complete.FCStd. It is now uploaded. The Printables web system alters the file suffix to lowercase. If the file downloads as invol-assem4-plan-9-7-23-complete. fcstd , you may need to…
This is a modded SB Rapido Rear for a Carto/CNC Metal Bracket for VORON 2.4/Trident. I have removed the mounting slots and added eyes to the body. Now, when you are working on the toolhead, the SB assembly can not accidentally fall from…
This is a modded Filamatrix Cable Cover with an added Voron Logo for Venting
After finally installing my G2E extruder I was surprised to learn that several of the pug umbilical mounts and even my slimmed down first version didn't clear the rear motors during homing X (rear right), or at the rear left XY corner. If…
This Stealthburner Vented Cable Cover has been narrowed to fit cleanly with the metal CNC Aluminium Stealthburner assemblies. The vents are quite large and the edges have been slightly thickened. I printed this with 100% infill, 3 or 4…
This is a modded SB Rapido Rear for a Carto/CNC Metal Bracket for VORON 2.4/Trident. I have removed the mounting slots and added eyes to the body. Now, when you are working on the toolhead, the SB assembly can not accidentally fall from…
This is a rigid mount for a Daylight On A Stick 24V Led Light. My printer can generate significant forces that can cause the led bar, if mounted only by its ends, to vibrate. My solution is to just print out a full length bar support that…
With a BentoBox sitting on this raised platform you'll have easy access to the wiring cabinet from the top. You won't need to remove the Bentobox to access the wiring. My Voron is a Siboor 300 Trident and I'm very happy to have this…
I enjoy reviewing and trying other ways of designing objects in FreeCAD. As well, I love geometry so this is something I often do in my freetime. I designed this using FreeCAD's Part Design, Spreadsheet and Assembly workbenches. This can…
I designed this a couple of years ago for my Creality printers and I had printed out many variations using this design in Triple-Quad and Quad-Quad planetaries. After building my AWD Voron Trident this basic pair of FreeCAD files were too…
This is a FreeCAD design of a print-in-place working cube in a cube gyro. I used the Assembly, Part Design and Spreadsheet workbenches to create it and have included two FreeCAD design files. Enjoy! A little support at the base of the…
There are many approaches to creating this Rhombicuboctahedron and this is just one way! You can find my FreeCAD design file here as well. I used FreeCAD sources to compile this dev version: 1.2.0dev.44934 (Git). I hope this helps others…
I have created a slightly tidier version here at: https://www.printables.com/model/1516055-pi-cam-mount-v2-for-ender3-v3-se-with-freecad-file ========================================================================= This is a Pi CAM mount…
I based the design of this icosahedron on the use of datums. I found this method to be straight ahead and long but enjoyable. There are other faster methods to create an icosahedron but this was practice to get used to FreeCAD! Use the…
First off, this does not block the Inverted Electrical Cabinet access. Just slide the new duct upwards on the blower housing. See the pics. Watch out for how the blower leads are routed. I usually print ABS but when I switch to PETG my…
This is another Pi CAM mount, V2, for an Ender3 V3 SE that has the Funssor Z Axis gantry support Kit. Use a panhead m3x10 screw. A nut is not required as the hole is undersized. This is for the PiCAM V1.3. I've included the FreeCAD files…
Use the collar to retain the shade. Use CA glue it you want to. The shade collar cap is used to add just a little more strength to the CA bonded parts. The shades can accommodate the splitter to convert a single light inside a glass globe…
To wszystkie aktualnie dostępne wyniki.
