Liczymy pasujące modele…
Template for DIY guitar pedal assembly in 1590B enclosure. Designed to ensure correct potentiometer and switch placement and simplify soldering outside the enclosure. 3x3 grid of 8mm holes, dX = 18mm, dY = 12mm (see attachment).…
This model is a 210 mm Vixen-style dovetail plate designed for telescope mounts that use the Vixen standard clamp . It can be used to mount optical tubes, telescope rings, cameras, guide scopes, or custom astronomy accessories . The plate…
4 in 1 wrench sockets key for scratch-free pedal assembly 8mm - for miniature toggle switches 10mm - for potentiometers 12mm - for most 6.35mm (1/4") jacks 14mm - for latching foot switches and switched DC Jacks
A compact DIY harmonic German equatorial mount designed for lightweight astrophotography setups. The mount is based on the Fysetc E4 v1.0 controller board running OnStepX firmware. Update May 24th, 2026: Added a Fysetch holder - a dumb…
This is a Bahtinov mask for the Arsenal 130/650 (Sky-Watcher 130/650) telescope
This tool allows you to check the accuracy and collimation of a laser collimator . Many inexpensive laser collimators are not perfectly aligned, which can lead to incorrect telescope collimation. This device helps verify whether the laser…
Designed for players frequently re-organizing their signal chain. Can be used to route the power cables where they need to go and hold the extra slack in place. Snug fit - the cables are held in a tight grip, will not fall out due to…
This is a Vixen-compatible mounting plate designed for astrophotography setups. It allows you to securely mount both a Raspberry Pi 4B (in a case) and the SVBONY SV241 Astronomy DC+USB Hub Box on a telescope using a standard Vixen…
Mounting rings and a Bahtinov focusing mask designed for the Samyang 135mm f/2 ED UMC / Rokinon 135mm f/2 lens. Update June 6th, 2026: Added fron and rear top rings parts for the focuser holder Added focuser holder The Bahtinov mask…
3D printable M42×1 to Sony E-mount adapter designed for the Tokina 135mm f/2.8. This adapter allows you to use the Tokina 135mm lens on Sony E-mount cameras such as Sony a6000, a6300, a6400, and Sony A7 series. The adapter has a 27 mm…
This mask is made to fit into the same mounting slots used by the original lens hood , providing correct centering and a secure, repeatable fit — no tape, adapters or friction fitting needed. Designed for astrophotography, the mask…
This is a model of a solar filter for the Arsenal Synta 130/650 telescope (similar to the Sky-Watcher N-130/650). It consists of three parts: an outer ring, an inner ring, with the solar filter film placed between them (in the example…
The adapter was designed for plates with the following dimensions: Inner diameter: 31 mm Plate thickness: 34 mm Mount counterweight shaft diameter: 12 mm The main version is designed for one plate (tested with a 1.25 kg plate ). An…
This is a Celestron Single Axis Motor Drive mount for Arsenal 130/650 newtonian telescope You will need: 6x M3x14mm bolts 2x M3 nuts
This is a set of accessories for the Samyang / Rokinon 135 f/2 lens: Lens hood Bahtinov mask Flat panel for flats and darks Extra meterials: You will need some self-adhesive flocking material if you're not OK with the lens hood reflection…
This is a set of accessories for the tiny Svbony SV535 astro photo lens Dew shield Lens cap Bahtinov mask Phone holder (for flats) I've printed this with the PETG, 0.16 layer height
The spacer allows you to increase the optical distance between T2-threaded components and 1.25" accessories. It can be useful when additional backfocus or spacing is required. Unlike many adapters, this model does not use a set screw or…
This tiny adapter slides onto the smooth moving front section of the Svbony SV535 lens and adds a standard 52 mm filter thread (M52x0.75), allowing the use of common photographic filters. The design is intentionally low-profile and…
Cozy Candle Flame Mod for LEGO 40743 🎄 This is a simple lighting mod for the LEGO 40743 set , designed to turn the candle into a warm, cozy glowing flame . A small upgrade that adds a lot of atmosphere, especially for winter and Christmas…
3D printable Bahtinov mask designed specifically for the Tokina 135mm f/2.8 with M42×1 thread. Perfect for astrophotography, this mask allows precise star focusing in seconds. Lightweight, easy to print, and accurate for infinity focus.…
Rear cooling fan mount for a Sky-Watcher Flextube 200P telescope tube with no factory rear ventilation. Holds an 120x120mm fan (tested with Arctic F12 PWM PST) behind the primary mirror, mounted on silicone anti-vibration dampers to keep…
This is a modular accessory system designed specifically for the Svbony MK105 Maksutov telescope. The system is built around a base mount installed on the telescope tube, with interchangeable threaded accessories. 1 Base Mount (Core…
Vixen-compatible mount designed for the legendary Soviet mirror lens MTO-500 (ZM-5C). The mount consists of two parts that are joined together using four M3×12 screws . You will also need four M4 nuts , and dedicated hex pockets are…
This project is a collection of useful 3D-printed accessories for the legendary Soviet MTO-500 mirror lens (including models like 3M-5A / ZM-5). The goal of this project is to create practical upgrades that make this classic 500 mm mirror…
This is a hood-mount solar filter adapter designed specifically for the Sony SEL55210 (E-mount APS-C). The adapter locks directly into the original lens hood bayonet groove, allowing the use of an existing full-aperture solar filter…
This is the second part of my accessory set for the classic Soviet mirror lens MTO-500 3M-5A. These parts are designed for astrophotography and solar observation setups and are fully compatible with the accessories from Part 1. First part…
GSO 1.25" EAF-compatible dual-speed Crayford focuser base + mounting plate for a Gemini EAF (adapted for a 130mm Newtonian tube) I bought this focuser, and the shop offers a choice of two base plates for mounting it to the tube — the one…
These rings keep a home-made shroud in shape and prevent it from sagging into the optical path of a Sky-Watcher 200P Flextube Dobsonian truss telescope. Testing showed that a single ring is not enough to hold the shroud's shape reliably —…
Protects your lens from dust, scratches, and damage during storage or transport. Easy to print, lightweight, and fits perfectly.
Rear cooling fan mount for a Newtonian 130/650 telescope tube with no factory rear ventilation. Designed to fit a rear opening of approximately 105mm diameter. Holds an 80x80mm fan (tested with Arctic P8 Silent) behind the primary mirror,…
To wszystkie aktualnie dostępne wyniki.
