Liczymy pasujące modele…
The original design by Mikek is great, but I don't have much of a selection of M3 cap-head screws. I do have a great selection of M3 flat-head screws! Also, my experience with pressed-in M3 nuts is not great. Heat-set nuts wont fall out,…
I saw these unhandled chisels on a YouTube channel that I follow (StumpyNubs): https://taytools.com/collections/brands-narex-chisels/products/narex-6-piece-unhandled-bevel-edge-set I picked up a set as a fun multi-media project. The…
Built to match the form factor of the soldering iron holding base for a complete look. Material, fill percent, and layer height are flexible. The copy shown was printed in PETG with 0.35-mm layer height and 50% fill. The holes as printed…
I love this Speedy Stitcher for using heavy waxed nylon sewing awl thread to hold pieces of polypropylene seatbelt webbing together. It can be a real bear to get the needle through 3 layers at one time. The standard cap just does not fit…
Fits units that are 45-mm X 26-mm by 14-mm deep. I acquired these combination Hygrometer / Thermometer from Amazon Material, layer height, and fill are all flexible. Support is recommended. Set your overhang limit to 45° to not fill the…
Do you have a problem where you are trying to minimize the crap that you carry around with you all the time? Something that may help is a modular wallet! Nothing makes it easier to not carry additional crap then not having a place to put…
Very simple models to cover cutting tools. Mine roll around in my toolbox and I don't want them banging in to each other and chipping the cutting edges. Material, layer height, and fill percentage are flexible. Versions shown are Hatchbox…
This is for the Fiskars 14 ft PowerLever Tree Pruner (1-1/8 in. cut capacity). It likely works with the shorter and longer models as well. It is a great tool, but there is not a built-in way to manage the pull rope for the pruner to keep…
Perfect for adding some personality to your cubicle at work (or home)! This version holds the flag vertical This is designed to hold the 12-in by 18-in flags with 11/32-in (8.5-mm) diameter stick. I am not sure what all types of cubicles…
I keep buying woodworking projects and solving the problems by designing and printing things... I picked up this leather strop kit from Taylor Toolworks to help sharpen knives and chisels. Printed version shown is 50% fill 0.35-mm layer…
Perfect for adding some personality to your cubicle at work (or home)! This version holds the flag at 45° below the vertical. Great for adding flair to your high wall cubicle This is designed to hold the 4-in by 6-in stick flags with…
Need a container for your 357 type batteries? Here you go! The button cell diameter is 11.5-mm and the thickness is 5.2-mm Dimensions of the container are 30-mm by 56-mm and 7.2-mm thick. This is built to fit in an old Harbor Freight…
Three sets of vise jaws for a 5-in (126-mm) bench vise. Mount holes are for 6-mm socket head cap bolts that are spaced at 75-mm center-to-center. Jaw height is 21-mm. Print fill percentage, layer height, and material are flexible. Support…
These are made for cheap 1-in webbing ratcheting straps from Home Depot (HDX brand if I recall correctly). The loose ends were getting tangled up in my ammo cans. The straps being all tangled makes a good excuse for not securing the load…
As with most people, I have more tools than I have space to organize them, so I made these! Good strong cup magnets hold the wrenches up on the exterior of my upper toolbox. The rectangular one is built to hold the Craftsman CMMT99441 ,…
My wife snagged the navigation joystick knob on our 2012 CRV EX-L with navigation and it disappeared. The original replacement part is Honda 39544-T0A-A51. They are actually pretty cheap and readily available… But like all things in life,…
Don't like tying and untying your sneakers? Well print one of these! I print mine in black to go with my all-black sneakers. You can print in any color; blend or stand out! This was designed to work with the 3-mm diameter athletic type…
I love Speedplay X series pedals! I like the cleats further back on the shoe, and I use the part number 13330 cleat extender base to make that happen. The extender base is aluminum, so the stainless steel bowtie will wear the extender…
Perfect for adding some personality to your cubicle at work (or home)! This version holds the flag vertical This is designed to hold the 4-in by 6-in stick flags with 7/32-in (5.5-mm) diameter stick. I am not sure what all types of…
This version holds the flag at 45° below the vertical and 45° off the centerline of the cube wall interface. Great for adding flair to the corner of your high wall cubicle This is designed to hold the 4-in by 6-in stick flags with 7/32-in…
Add that finishing touch to your square tubing project! Keep bugs and dirt out of the tubing. Screw-tightened wedge to ensure solid retention. Square wedge to prevent rotation. Print layer height, fill percentage are flexible. Support is…
This design was inspired by the Nite Ize CurvyMan Cord Supervisor which no longer appear to be made. They are available on line for a lot more than I remember paying for them. They were intended for use in managing excess headphone cable,…
Add that finishing touch to your square tubing project! Keep bugs and dirt out of the tubing. This was inspired by my twin sister's stream of curses after being stung by a wasp that lived in the tubing in her backyard bench. She can…
The width of the part is 30-mm. The minimum height of the hole that this will go in to is 10-mm. The max thickness of material that this will go over is 3-mm. Maybe this will work for other desks, or remix it for your use! The cable…
I have been riding with Speedplay X pedals for a long time. Sometimes changing shoes is annoying, so I took an old set of cleats and made these platforms to fit. Easy-peasy to ride in street shoes! The square loops at the end allow the…
I picked up a 1.2 oz block of this polishing compound from Taylor Toolworks and I thought it would be nice to have an applicator to hold on to, and a cover to keep fuzz off of it. The dimensions of what I received are 18.8-mm in width,…
To wszystkie aktualnie dostępne wyniki.
