Liczymy pasujące modele…
This is a simple dust cover for the Z-axis mounts. They drop in place, and prevents most of the debris from falling into the Z-axis mount opening. Update: People noted that the clearances wasn't working perfectly anymore, so I checked the…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A filament filter that snaps on to a PTFE tube, using a PC4-M10 coupler. Put a small piece of foam inside of it and ram a pointy piece of filament through the entire filter several times. This is to form a hole and remove any chunks of…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
Update: From what I can tell looking at the MK4S R2 parts, they haven't changed at all. So the MK4 dustcovers should fit just fine on the MK4S. Unless if the X-axis go lower down on the MK4S than MK4, then it might be a problem. But I…
This is a modular 150mm air hose adapter, that simply screws on to common flexible 150mm spiral hoses. These hoses are commonly used by portable AC units. The parts are done from scratch, but I did use the threads on the main adapter from…
Update: I've made a new version of each body, which supports 7mm googly eyes. I exported the model for the Cuddlefish from Subnautica, and modified it to use the modular ball-joint arms (from 3DCentralVA and Ellindsey ). Though the arms…
Even though I have a MMU2 I didn't want to bother with it, so I split up all the parts (or remodeled) to be printable by themselves. And then assembled by simply gluing them together. Everything has been split up, except the “this is…
I modified the original design to: -Fit 61mm wide razor blades (the ones I got with a utility knife are 61mm wide at the cutting edge, 32mm wide in the back and 19mm deep). I'm not sure what blade size the original was made for, but my…
This is a cover to get rid of the harman kardon emblem reflection in the windshield (but still make the h/k logo slightly visible). I printed it out of TPU on top of blue painters tape, which gave it a matte surface finish (and it…
A remix of the sanding sticks and customized labels to be 10mm and 25mm wide. The photo shows the 10mm ones to the left, the original sanding stick in the middle and the 25mm versions to the right. They use the same printed screws as in…
This is a dual hose conversion rear panel for the "Electrolux Chill Flex Pro EXP35U538CW" airconditioner. I implemented the same Electrolux connector made by wejn . It works great with his 150mm hose attachment .…
Remixed the Wowstick frog box to fit the “Precise Electric Screwdriver”. I bought one called “ORIA Precision Electric Screwdriver 28 in 1" on Amazon (ASIN: B07X1MY1JN). Looking around, the brand name (ORIA) could be whatever for the exact…
This is a modification to the filament buffer kit that comes with the MMU2s. I think that the original design of the buffer is to much of a hassle to load, since you don't have enough room to grab and push the filament towards the MMU.…
Here are my versions of the Fluval Flex inlet covers that give better coverage around the sides. These where made to fit the Fluval Flex 57L (15 gal) version, and I can't confirm if they fit the other sizes of aquariums. If you try them…
I remixed the feeding hole cover by Robware to have ventilation holes in it. Had an Amano that wanted to go exploring one day… So I just wanted a cover that keeps them in, but at the same doesn't completely block the already limited…
A .22lr ammunition dispenser, with a spinning lid. Each stepped segment dispense 5 cartridges. It has two different lids to choose from: A solid lid. Same lid, but with added inspection holes. UPDATE: I modified the bottom part to make…
This is a compound bow stand with rubber sleeves/protection, for solid limbs. (In my case, a Diamond Medalist 38. Which has limbs 37mm wide, and 8-10mm thick). Print a right and a left leg, and two rubber sleeves. Four versions of the…
I liked the formfactor of the original, but wanted to make some changes to the design. So I remade it from scratch to change some angles, make softer edges, make the pestle solid etc. I use it to crush some shrimp food into smaller pieces…
A hang on tray for aquariums. I use it for smaller maintenance tasks when I don't want to drag out a bucket or tub. It's made to be able to be hung on glass ~5,5mm thick. Update 2021-04-07: I've made a second version which has a row of…
EDIT: Made a new “Top” insert which is more open. (Second photo). I simply removed an internal wall to make it easier to remove the stand and the tips. “Case_Insert_Top_Open” Remixed inserts for the rugged case (V2, Large parts). Made to…
Hi all, I'll start with listing all the parts, items and hardware you will need for this build: - 5x 350x350x3mm acrylic panels (I got one acrylic mirror panel for the rear). - 4x M3 ~20-40mm screws/bolts to attach the stand to the bottom…
Extra supports to use with the "Work Sharp Professional Precision Adjust" knife sharpener (or similar sharpeners). Simply put them where needed and extend them to the desired height by unscrewing them. There is a narrow version and a…
I made this blocker for the driver sensor since it keeps annoying me and not functioning properly. The goal was also to make it easily attachable and removable. It requires the steeringwheel to be pulled out a bit since the sensor will…
To be used together with langjais purge bin or my remix of that one. Parts required: 1x 10mm m3 bolt 1x m3 square nut 1x bambu lab silicone nozzle wiper for A1 Push the square m3 nut all the way into the slot, then attach the wiper arm…
Changed the original to have a much looser fit on the portafilter (making it easier to lift off without taking the holder with it). I also added slots for magnets and anti-slip silicone bumpers/feet. The anti-slip domes are necessary for…
A simple arrow spinner/checker/inspector, using 608 bearings. Everything is simply press fit into each other, and no glue should be necessary. Naturally, it depends on your printer settings how tight/loose everything becomes. For me…
Print it out of for example PETG. It will withstand heat pretty well and can flex quite a bit when attaching it to the sunvisor. You might want to add some brims depending on how well your buildplate sticks. It's important to keep the…
An adapter for the Electrolux vacuum cleaners (with the rounded rectangular nozzles) that connects to a 40mm (outer diameter) vacuum hose. Vacuum hoses most likely vary a bit depending on manufacturer so there is no guarantee that it will…
This adapter attaches to the end of the standard Electrolux AC exhaust nozzle. It's made so that the extensions and vents from here can be used on the end. The locking collars simply slides onto the rims of both the original nozzle and…
Two different handles for the "Work Sharp Professional Precision Adjust" knife sharpener. -" Standard " for using the regular abrasives that comes with the sharpener. -" Universal " for using generic ~160mm long abrasives (the ones with…
Changed the original to have a looser fit so that the tamper can be lifted more before catching on the holder. I also added slots for magnets and anti-slip silicone bumpers/feet. The anti-slip domes are necessary for the holder to stay in…
First of all, dry your TPU filament… Otherwise the surface finish will be like my photos. Anywho: I made this protective case for the EX30's Key Tag, since I don't want to scratch the hell out of it when I toss in into my pocket. It is…
A two part rubber and hard plastic spatula. The handle can be printed with any hard plastic, and the rubber part should be printed with TPU/TPE or similar rubber filament. (I used NinjaFlex) -Print the handle first -Slice the rubber part…
A rod holder for the "Work Sharp Professional Precision Adjust" knife sharpener. The original handle slots into the top of the sharpener, but If you want to use a universal abrasive handle it won't fit. So this is a simple drop-in part…
Two different hooks that fits on a Vileda mop rod. In my case I use the hook/pusher to open and close my Velux windows. Since the people who built the apartment thought it was a splendid idea to but the window handle/bar almost 3 meters…
I remixed the holder (from: https://www.thingiverse.com/thing:1918473 ) so that it would be angled more vertical on top of the printer, since the original version was angled a bit too much upwards when inside of a LACK enclosure. Print two.
I made this quick arrow tube insert to hold 12x 7,4mm (O.D.) arrows, inside of an arrow tube case/storage/quiver (One of the telescopic ones, which are 65mm inside diameter). This way the fletchings won't get damaged. You need to print…
Remixed the bottom mould to add nozzle size embossed on the side. Otherwise no other change to the model. Use the “V9_top_mould_open” from the original . “n040” = 0.40mm “n060” = 0.60mm etc. etc.
A TPU holster for the “ Nextool Mini Sailor Lite ” multitool and a little optional strap that can be printed. Made to fit 35mm wide belts. The strap should also be printed out of TPU and simply loops around the small keyring that comes on…
Update: I've made a new version that hangs down a tad more and has sidecovers. Thus not blinding you when standing to the side of the aquarium. A quickly made light reflector for the Fluval Flex 57L (15gal) aqarium lamp. It simply slots…
The wide angle lens on the Buddy3D Camera for Core One can see a bit outside of the printer. Especially after mounting the angle modification by @Jason . So I made these little covers that just pushes onto the lens of the camera, and…
This filament filter is (to no ones surprise) heavily influensed by the great filament filter by CNC Kitchen, for the Prusa MK2S. Put a small square piece of foam in the compartment, push through a pointy piece of filament several times…
A rather simple coffee needle distributor (WDT) using regular sewing needles, and with two different stands. It supports up to 7 needles. I wanted something with sturdier needles compared to the regular ones that use acupuncture needles.…
A filter for the pipe of a Dennerle nano gravel cleaner, that prevents for example shrimplets from being sucked in. It uses a stainless fine mesh as the filter medium. The Dennerle nano gravel cleaner pipe is ~16,3mm in diameter and this…
A remix for the camera housing to fit the MakerHawk IR fisheye camera (ASIN: B07DRH5Y5S). I also made a longer arm to get a wider overview of the buildplate. It requires: -4x M3x20 screws to assemble the camera housing. -1x M3x12 to…
Remixed the original to fit the NetDot 10th generation magnetic USB adapter cables. (ASIN: B07QB6HVFY). I'm also not fond of gluing everything together (and possibly ruining the cable), so it has been changed to use 2x M3x20mm bolts for…
A tool to help slide cables into the (old) IKEA Montera cable channels/trunkings, which I found to be extremely tedious since the rubber lips/edges keep folding in on themselves. I'm not sure if this will work on the updated versions that…
Here is my version of an active filtration system for the Prusa Core One. It uses designs from the filter by CNC Kitchen and the advanced filtration by PeterLu . This filter use the same vacuum cleaner HEPA filters, activated carbon and…
MK3/S You will need the following for each MK3/S foot: 1x M4x10 button head screw 1x M4 nut 1x T-Nut ("TNut_3030_M4") 1x Foot of your choosing ("Foot_3030_XXmm") They will require a T-nut (remixed from:…
Some material sample stands. Made for propping up samples in a light booth for color verification. With markings for different angles of the sample. 70°, 55° and 45° on the front, and the rear has a 90° surface.
Replacement mounting brackets for the Housegard mini classic (KD-128) smoke detector. I wanted to mount mine with the Housegard magnetic mounting plate, but the back of the original mounting bracket isn't flat. So I made a new smooth one…
To wszystkie aktualnie dostępne wyniki.
