Liczymy pasujące modele…
A tall ribbed 200 mm lamp shade model that can use Lamp Base#2. https://www.printables.com/model/850873-lamp-base-2 Shade - 200 mm height x 135 Width w/ Base - 250 mm height No supports required. The fassung-lamp socket ( e14-28 mm):…
An articulated tall abstract lamp shade model that is shown using Lamp Base#2, https://www.printables.com/model/850873-lamp-base-2 Shade - 225 mm height x 85 Width w/ Base - 275 mm height No supports required. The fassung-lamp socket (…
Staunton (Modified) Chess Set The Staunton chess set is composed of a style of chess pieces used in competitions. The journalist Nathaniel Cooke is credited with the design, and they are named after the English chess master Howard…
A abstract lamp shade model that can use Lamp Base#1, https://www.printables.com/model/849141-lamp-base-1-3-leg-stand-e1. 180 mm height x 105 Width No supports required. The fassung-lamp socket ( e14-28 mm):…
A scary articulated skeletal Gnome. The 2 colored model was printed using Basic PLA Grey and eSun Bone white. Standard 0.4 nozzle The slicer settings: .16 mm Standard Infill % - 15 , Lightning Seam Position- Back Speed: Initial layer: 35…
A twisted lamp shade model that uses the lamp kit 01 base. Shade w/ Base - 105 mm height x 115 Width No supports required. The puck led used here: (The example used a 5W, 2700K, Warm White)…
Planter with a twisted rib design, rectangular and circular plates. Drainage as well as non-drainage designs are provided. The planter has been tested with water over a 24 hr. period and did not leak. The planters are 90 mm height x 110…
A ribbed 150 mm lamp shade model that can use Lamp Base#2. https://www.printables.com/model/850873-lamp-base-2 Shade - 150 mm height x 80 Width w/ Base - 200 mm height No supports required. The fassung-lamp socket ( e14-28 mm):…
A Japanese Hex Toro style hexagon lantern . 215mm height x 155 Width 200 mm Height Shade Supports are required to print lantern base frame and top The fassung-lamp socket ( e14-28 mm): https://www.amazon.de/dp/B097K4YNL9 The electrical…
An articulated turbine shaped lamp shade model that is shown using Lamp Base#2, https://www.printables.com/model/850873-lamp-base-2 An additional STL is provided for a Snap-On lid which can be used to accent the lamp, see pics. Shade -…
A printed offset block lamp shade using the Bambu Lamp Kit 001 Base and Puck Led lamp. This shade uses a square base to adttach to the bambu Led Lamp 001 circular base. Lamp w/Base: 215 mm by 80 mm wide No supports required. The puck led…
Black Cat - Egyptian Pose .16 High Quality Seam: Aligned Infill 15%, Gyroid
A honeycomb pattern lamp shade adapted to use use Bambu Lab Lamp Kit 001 base Shade with base: 190 mm height x 85 Width No supports required. The puck led used here: (The example used a 5W, 2700K, Warm White)…
A detailed buddha style gnome,measuring: 152 mm (~6 inches height) 45hr print time 127 grams filament Ready for painting .. No supports required. The pictured gnome was printed using: Detailed STL and standard 0.4 nozzle Sunlu PLA+ White…
A taller Japanese Shoji style lamp. Shade measures 200 mm height x 108 Width Lamp with walls, base and top: 250 mm height by 150 mm width Print 4 of the walls and 1 of each of the base pieces and the shade. Melt 4 x M3 Inserts into the…
Planter with a simple geometric design and holder plate(s) Two different Plates/bases are provided: 1- Rectangular double base 2- Circular single base. Planters with drainage as well as non-drainage designs are provided. The non-drainage…
A detailed buddha style gnome, solid using infill, measuring: Detailed STL and standard 0.4 nozzle 171 mm (6.7 inches height) 4 hr print time 150 grams filament Ready for painting .. No supports required. Print profile used the detailed…
An 80 mm general purpose stand for a lamp using an e14 socket. Can be used for a lamp shade, 30 mm space can be secured with the e14 collar. Inserts for the nut base are shown, allowing the vase to be connected with the M3 by 10mm hex…
A general purpose circular stand for a lamp using an e14 socket. Can be used for a lamp shade that has a solid or closed top and needs a holder or one with either a 30,, or a 35.2-36 mm opening. Easiest way to use is to measure your lamp…
A general purpose 3 leg stand for an e14 socket. Can be used for a lamp shade or lamp base for multiple-shades. Screw on cap to hide socket and cabling. No supports required. The fassung-lamp socket ( e14-28 mm):…
A honeycomb pattern lamp shade that can use Lamp Base#1, https://www.printables.com/model/849141-lamp-base-1-3-leg-stand-e1. 185 mm height x 85 Width No supports required. The fassung-lamp socket ( e14-28 mm):…
Lamp w/Base: 2 models .. 110 mm height x 85 width 130 mm height x 85 width Supports are required for the shades The puck led used here: (The example used a 3W, 6000K, Cold White or 5W, 3000K, Warm WHite)…
A tall circular lamp shade that can uses Lamp Base#4 and a holder plate specifically made for this shape shade. It has an added 4-post cage added to the lamp base and held ib place by the e14 collar.…
A stylish Halloween themed tea lamp that works with both tea candles and/or a Bambu style 001 puck light. Creating a warm ambiance, whether with a flickering flame or steady, eco-friendly LED lighting. Three Stls are also provided the…
A free-form abstract Cityscape lamp. Shade: 150 mm height x 110 mm Width Lamp: 180 mm x 130mm width This lamp uses a 5V Puck Led, currently a 5W - Warm White, and the one used here, see link below, uses a standard USB connector. The base…
Gnome figurine - The Lighthouse Keeper. 160 mm Height The 160 uncolored model was printed using Sunlu Cream White PLA+ on a P1P and is ready for painting. The white gnome was printed using: Standard 0.4 nozzle The slicer settings: .16 mm…
Black Cat - Abstract Eryone Matte Black PLA .16 High Quality Seam: Aligned Infill 30%, Gyroid Walls 4
A Knurled Tessellation planter pot. A medium planter pot with a simple knurled design pattern and circular plate. Drainage as well as non-drainage designs are provided. The planter has been tested with water over a 24 hr. period and did…
A oval lamp shade that can uses Lamp Base#4 and both a holder and a shade having a 30 mm hole. This lamp also uses a cap. As the shade has a 30 mm opening, the bottom holder is optional and the lamp can be setup with or without it as…
This take reduces the number of base pieces from two to one. The base no longer requires M3 inserts, M3 screws, or M12 nuts. Due to the higher density of the Hemp Leaf shade, I also relaxed the printing requirements of the screen and…
This is a simple lamp, easy to print in 2 pieces. The outer Shell and an inner shade. 210 mm Height - 85 mm width It was made for an E14 fassung(socket) with a threaded insert printed to make it easier to screw in the bulb socket . The…
Garden style gnome with exaggerated features. Idle Hands .. Three size models.. 152.40, 100, and 50 mm. The 152.40 model is printed using Sunlu Meta Cream White and is ready for painting. Printed using a P1P The 152.4 mm - white gnome was…
An abstract Art Deco style sculpture that can be made with one or more objects,, Another in the Childless Cat Lady series .. Female statue and the pair of cat sculptures, cougars ... having too much fun with these .. Supports are required…
A medium ribbed 125 mm lamp shade that can use its own base and cover resulting in a 215 mm lamp. The lamp shade has a 30mm hole so can also be used as a shade with some other lamp bases:…
A general purpose stand for a lamp using an e14 socket. Can be used for a lamp shade, between 29 and 34 mm space and secured with the e14 collar. Inserts for the nut base are shown, allowing the base to be connected with M3 by 10mm hex…
A medium sized earthy plant pot along with a circular plate. Drainage as well as non-drainage designs are provided. The planter has been tested with water over a 24 hr. period and did not leak. PLA will deteriorate over time and swell…
A printed birdcage lamp cage, simple shade and its own base for an e14 socket and bulb. With the base, the lamp is 180 mm height and 120 mm wide. The base is attached to the birdcage using 3 M3 by 10 screws and 3 brass inserts. No…
A abstract lamp shade model that use Bambu Lamp Kit 001 Base/ Lamp w/Base: 190 mm height x 105 Width No supports required. The puck led used here: (The example used a 3W, 6000K, Cold White)…
Gnome figurine - The Baker .. with exaggerated features. 101 mm Height The 101 uncolored model was printed using Sunlu PLA+ White on a P1P and is ready for painting. The 101 mm - white gnome was printed using: Standard 0.4 nozzle The…
An abstract Art Deco style sculpture that can be made with one or more objects, lady kneeling statue and the deco cat. Supports are required for both printable objects, the lady kneeling and the cats. Both printed using Sunlu PLA Meta -…
Planter with a simple split design for multi-material printing and 2 holder plates. Two different filaments are used, a Marble PLA and a black PLA. Two different patterns for the upper part of the pots are used: 1- Kumiko Hemp Leaf 2-…
A short, square symmetrical lamp. Old style. This is expandable to more levels by adding additional “BoxLevel” pieces and expanding the size of the shade. STLs for 2 shade sizes have been provided, one for what would be 1 middle level and…
A Herringbone Tessellation planter pot. A large planter pot with a simple angled facet design and circular plate. Drainage as well as non-drainage designs are provided. The planter has been tested with water over a 24 hr. period and did…
An abstract Art Deco style cityscape lamp base using an e14 socket. Can be used for a lamp shade that has a 30 mm opening for a shade or a holder for a shade. No supports required. The fassung-lamp socket ( e14-28 mm):…
This is a multi-part lamp made using the Lamp Base, https://www.printables.com/model/849141-lamp-base-1-3-leg-stand-e14. There are 2 shades and the base which is attached to the Lamp Base using the e14 collar and then the shades are…
A shorter octagon lamp shade that can uses Lamp Base#4 and a holder plate specifically made for this shape shade. https://www.printables.com/model/858997-lamp-base-4 Lamp Base #4 allows the usage of closed top shade that sits in a tight…
A shorter 120 mm lamp shade and octagon casement that can be used Lamp Base#3. https://www.printables.com/model/853136-lamp-base-3 Shade - 120mm height x 90 Width w/ Base - 225 mm height No supports required. The fassung-lamp socket (…
An abstract Art Deco style cityscape lamp base using an e14 socket. Can support a lamp shade that has a 30 mm opening or a holder for an open shade. Lamp base is 250 mm tall by 140 wide .. No supports required. The fassung-lamp socket (…
A shorter 145 mm lamp shade and snap-on cap that can be used Lamp Base#3. https://www.printables.com/model/853136-lamp-base-3 Shade - 145 mm height x 100 Width w/ Base - 250 mm height A simple cylinder lamp shade with a 30 mm hole in the…
A shorter 120 mm lamp shade model that can use Lamp Base#3. https://www.printables.com/model/853136-lamp-base-3 Shade - 120mm height x 90 Width w/ Base - 185 mm height The lamp shade “snaps” into the shade holder which us attached to the…
A tall shaped general purpose stand for a lamp using an e14 socket. Can be used for a lamp shade with a circular opening between 29 and 36 mm. The shade is secured with an e14 collar. The weighted base is secured using inserts and then…
An offset tower lamp using a modified Bambu Lamp Kit 001 Base and Puck Led lamp. Uses 1 M3 insert and 1 M3 by 6 mm fat head screw to attach modified Kit001 base to hood. (See Pictures) No supports required. Assembly: (see pics) 1- Print…
A lone night watchman gnome Ready for painting .. Supports are required .. The 152.4 mm tall white gnome was printed using: Standard 0.4 nozzle Sunlu PLA+ WHite The slicer settings: .20 mm Standard Infill % - 15 , Grid Seam Position-…
A hexagon closed lamp shade that can uses its own base that acts as a holder specifically made for this shape shade. The shade is 120 mm height x 85 Width. With the base, the lamp is 235 mm height with a 110 mm wide base. No supports…
A free-form cubic frame lamp. Old factory style, abstract Cityscape. 185 mm height x 150 mm Width Print 2 of each of the walls and 1 of each of the base and the lid. Melt 1 x M3 Inserts into the bottom and top bar of each wall. Attach the…
Gnome figurine - The Baker .. with some exaggerated features. 98.4 mm Height The uncolored model was printed using Sunlu PLA+ White on a P1P and is ready for painting. The white gnome was printed using: Standard 0.4 nozzle The slicer…
A rainy weather gear style gnome, 3 different models Ready for painting .. Requires supports .. The 50 mm and 100 mm height print profiles were made using a P1P and an AMS unit and 4 colors.. Sunlu PLA+ White Eryone PLA Skin ESun PLA…
Scratch those hard to reach places until you draw blood .., Tall Thin Print. Added a brim.. Print Filament: Sunlu Meta Cream White .20 Layer Seam: Aligned Sparse Infill Density: 10 Pattern: Adaptive Cubic Speed: Initial Leyer: 35 Initial…
To wszystkie aktualnie dostępne wyniki.
