Liczymy pasujące modele…
This is a bottle cap with a watering nozzle. The cap should fit any regular PET plastic bottle. The nozzle is angled by 60° to make it easier to use. Printing instructions: Use a printing sheet with a smooth surface (to avoid leaking).…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Mounting 4 x M5 or M6 screws Recommended print settings PCTG or ASA (for strength and UV resistance) Print on it's side (model default orientation) 3 or more walls 0.2mm layer height 7 or more top and bottom layers 10% gyroid infill No…
Wydruk około 14,77 €–18,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I always had problems with my Kratky bottles. Either, they were super hard to refill, or the plant just dropped into the vessel. This adapter fixes that! You can just easily fill the nutrient solution into the funnel, and it will flow…
Der original Drehknopf lässt sich schlecht greifen, erst recht mit Handschuhen. Hier eine verbesserte Version: Nicht glatt sondern geriffelt, etwas größer und mit schwarzem Index. Der Knopf wird einfach auf den alten Knopf gesteckt.…
It leaks a bit so it should not be filled with water! Increasing bottom layers may help. Files are intended for 4-in pot but it should be scalable Printer Settings: Built with supports Bottom Layers: 5 10% infill
Many RV (caravans, campers, trailers) have a bumper made of a heavy steel square tube. If you put a cover on it which is easy to put on and remove, you can store stuff inside the bumper. These bumpers are usually 6 ft / 2m long, so you…
Cup holder for my lawn chairs with 26mm tubing Category: Outdoor & Garden
This was designed with a large format printer in mind and MAY NOT WORK IF SCALED DOWN (i'm not 100% sure though, let me know if you try it and i'll update description). THIS MODEL IS 361mm x 396mm This requires both a shop vac and a piece…
Modular octagonal plant support The plant support comes in three sizes, wich all fits together - S fits to L, L fits to M, M fits to S, L fits to L ……. and so on. This allows you to put together a completely individual plant support and…
utile moschettone multiuso, le dimensioni sono facilmente scalabili sullo slicer
Bird Feeder You will need: 1x Glass bottle with wide lid 3x Round Timber 15x150mm 3x Wood Screw 2x30mm 3x Wood Chopping
Handles for Skånska Byggvaror Outdoor parts Intended to sit on the inside of lot with fitted outside original handle. With the handle, you get a grip to push the part from the inside. The handle does not prevent the parts from being…
Mini Vase "Clay pot style" Collection - Mini Vaso in stile classico terracotta Easy to print, optimized filament usage Resize/Scale to adjust dimension Don't forget to "Click A Like" & check out my other designs
Overview This customizable 3D printable seed starter helps solve fit and layout problems in seed starting by letting you adjust pod size, pod spacing, row and column count, and overall tray configuration. Generate a seed tray that matches…
Haken für die Befestigung einer Volant Rolle (unsere ist von der Firma Heim und Haus). -Haken müssen stramm mit einer Zange eingedreht werden. -Gummilaschen Plättchen zum befestigen (und Anleitung) auf meiner Seite.
Some in-ground utility boxes have a large hole in the middle which could be a trip hazard. Where I work there is a ~70x150mm hole in the middle, right in the middle of the sidewalk. The safety person kept covering it with a pylon - again,…
Odymiacz do podawania lekarstwa przeciw warozie ,tabletka Apiwarolu. Potrzebne narzędzia: 1.Wydrukować plik przed wydrukiem podzielić plik na 4 części : 2 części korpusu plus mała wstawka do niego , dysza wylotowa. 2.Trójnik miedziany…
It's basically a 1" pole mount for the popular European model of fence posts. The fit is very tight, you may want to use a hammer. It's intentional to make sure the station is as stable as possible.
Versión 2.0, es más delgada, más larga y se adapta mejor a los muelles. Impresa en PETG. Capa inicial 0,3 resto de capas 0,25. 15% relleno Version 2.0, it is thinner, longer and fits better on the springs. Printed in PETG. Initial layer…
I needed a more flexible thinner grid with seamless expansion capabilities to cover bigger areas where my robot mower digs holes and get stuck in wet weather. I also added pegs and assembly clips to join the mats and peg them down.
A commercial license for the Cat Planter V3 Only, which includes the single and also multicolor version
This heavy duty gate latch is sure to be kick-proof from even the hardiest of Amazon drivers. That is why I made this. Amazon drivers kept kicking my fence gate even though there is a sign clearly directing them to go around to get to my…
This bead is designed to easily mark 2 mm paracord. It's perfect for identifying cords as belonging to a specific tent or personal item—ideal for camping, outdoor activities, or general organization. Print Details: 3D Printer: Ender 3 V2…
This replacement diffuser/screen/shade for the brennenstuhl can be used as a simple replacement or to color/tint the light output (I have personally used glow-in-the-dark filament to create a greenish light for halloween). I highly…
I needed a clip for my shed guttering 76mm but shallower, so created this model.
Connettore/adattatore per tubo da giardino Metti il Teflon sul filo!
Avevo bisogno di un tappo per il mio attacco per il tubo da giardino del camper. Si avvita facilmente e funziona benissimo.
Adattatore Zburns modificato per stampare senza supporti e con PTEG. Non mi fido del PLA per oggetti come questi che devono essere più scanalati. si prega di usare cautela quando Impostazioni di stampa Marca della stampante : Creatività…
Ho eseguito questo file tramite NetFabb per ripararlo. L'ho stampato con PLA usando supporti Tree ovunque su un Qidi Tech X-Max. Il file originale utilizzato è da https://www.thingiverse.com/thing:889833 Impostazioni di stampa Stampante :…
Cercavo un adattatore per poter agganciare un tubo da giardino a un tubo del water (7/8) e non sono riuscito a trovarne, quindi ho realizzato questo. Lavoro come piastrellatore e di solito quando smonto un bagno lascio il tubo del water…
Love the original so please down the files from there. The only things I changed were the lid to accommodate two pipes instead of two and the filter box to fit between the two pipes. This was a very rough and fast remix. It's not perfect…
Designed by me to restore a broken camping table. May be of some use to you. Fits tables like the one shown with a leg OD of 20mm (the hole in my bracket is 20.4mm) Supports not needed if you print the brackets with the triangular ribs on…
i couldnt figure out how to connect the separate pieces so i just took them into blender and added a boolean to fuse them together by default so i thought i'd upload that for people's use. it's very difficult to print the 90 without it…
A cause d'un effort trop important, l'accouplement d'origine avait cassé. Recréé à partir de la pièce d'origine. Imprimé en Prusament PC-CF
J’avais commandé des roues d’origine, mais les pneus n’ont pas tenu la saison. La tondeuse a un meilleur grip avec ces roues :-) Imprimée sur Prusa XL en 2 matériaux, en Prusament PETG-CF et easyprint TPU pour la roue et en PETG pour la…
Hi, a small model I made quickly because the inner and outer height of the pots of my newest plant addition do not match. The size is 58 mm diameter by 20 mm height. Easily scalable in your slicer for other sizes. No special print…
Habe mich von dem Drainmaster auf Amazon inspirieren lassen und entwickelte mein eigenes Modell. Dachte mir man kann das auch auf seine eigene Weise herstellen. Es war mir auch etwas zu teuer da bin ich ehrlich. Ich habe das Modell aus…
I liked the design of the original Plan Sign file but needed a blank one. You can add your own text in the slicer or cad software. You can even print it without text and use a permanent marker (or somthing similar) and write on the sign…
Dies ist ein kleines, stabiles und coqoles Windspiel was ich selber gemacht habe.
I hope to attract swallows this Spring. Painted on organic supports for slot. Consider a brim. 4 x M3 heat sets into house top. Roof attaches with 4 x M3x8 SHCS. 2 x #9 screws to attach house.
The Smart Greens Micro Drip Ring for 90mm Pots. Tube Connection is 9,5mm outer diameter. Print with: 0.4mm nozzle no supports needed 0.1mm resolution infill 30%
The two parts are connected in the middle with a 3mm shaft and connected in the grooves with some superglue.
This is a gable mount for the outdoor govee lights square model Print Settings Printer Brand: Creality Printer: K1 **Rafts:** No Supports: No **Filament:** Creality PLA, PLA+ white Notes: The gaps are a bit tight. I am sure you could…
plant support designed in the shape of a honeycomb which is modular and stackable Print settings: 2-3walls 20% infill material : PET-G,ASA,PLA(works but the others are better) Support : yes
This is a “wall wart” style mount for a Tapo C120 camera . These cameras offer a good bang for the buck, but the stock magnetic mount seems a bit lightweight. I needed to mount several of them outside, and felt the need for a more robust…
Pièce de remplacement pour une poignée de verrouillage de verranda d'un ami référence au dos de la pièce d'origine : 723.2151
✨ Welcome to My Printables Page! ✨ Thank you for stopping by! I put a lot of care and detail into creating this model, and I’m excited to share it with you. Each design is made with both function and aesthetics in mind so you can enjoy…
Spojka vysokotlaké myčky HECHT 323
Acknowldgement The Einhell part of the adapter is roughly based on the Battery Adapter Einhell Power X-Change General Purpose V2 by Hans . Warning The original battery has exposed contacts which pose the risk of accidetial shorts. The…
Быстросъёмное соединение гибких шлангов с автомобильной мойкой высокого давления KARCHER.
Die Maße der einlegeplatte (Siebdruck multiplex) sind B=149mm/L=543mm/H=15mm. Zur befestigung habe ich einfach passende Blechschrauben benutzt. Die 149mm Teile mit Clip und Anschlag sind für die Standard langen Auszugsstangen am Tisch in…
I wanted to avoid using batteries to power the station, so I needed a place where I could run the cables through (wires in the picture). Drilling through the supplied mounting rod was not feasible and it is not hollow, so I used a 16mm…
Petg, Plasty Mladec, Blue, nozzle 0,4 mm, MK4 Prusa
This adapter was used and tested on the 40v EZ Clean 600. Since the washer connectors are the same it will also work on the 600 18V +one version and the 320 18V +one version. The jug handle is useful to steady and control the washer.…
Erdspieß für Unkrautvlies 12cm lang, gedruckt in PETG. ca. 4,5 g pro Spieß -------------------- Ground spike for weed fleece 12cm long, printed in PETG. approx. 4.5 g per spike
The DXF/PDF file serves as a template for cutting out the body from wood. In my case, 20 mm thick. The DXF file is intended for a CNC milling machine. I built one myself. The mounting holes (4 of them) are arranged so that you can mill…
A mount or bracket for signs, allowing attachment to a t-post using a 1/4" bolt. I used it to attach a wheelchair accessible parking sign. This print requires supports; I recommend tree supports with a “no supports” rule painted on the…
The original Ballet Dancer 02 is created and kindly released to Internet by “mytanas” it was hard to print for me. TheNit released a remix of the figure in two parts. Grand job! Original: https://www.thingiverse.com/thing:1819299 Remix by…
La pieza permite enganchar un churro de piscina y usarlo como un ariete para mover barro o similar en inundaciones usando 2 palos de escoba estándar. Uno se usa para empujar y el otro se puede introducir dentro del churro si éste tiene…
Remix of simple hole cover that should be compatible with any AeroGarden product. Additional layers on the top of the cover (base of the print) completely block out the light, reducing the possibility of algae growth in the water…
Fence fastening for a sign 20x30 cm. You will need 4x washers M4 (Din 9021) 4x screws M4x10 (Din 912) 8-12x screws M4x16 (Din 912) 12-16x hexagon nuts M4 (Din 934) Zaunbefestigung für ein Schildt 20x30 cm. Es werden benötigt 4x…
Kappe für Zaunrohre mit einem Durchmesser von ca. 33,8 mm, ausgestattet mit drei aufschraubbaren Insekten-Unterschlüpfen, die jeweils einen Eingang mit 6 mm, 8 mm oder 10 mm Durchmesser bieten. Cap for fence pipes with a diameter of…
A portal to a hedgehog house, designed by my daughter. Decoration and protection of the edge of the entrance opening. Portal do domku dla jeża, zaprojektowany przez moją córkę. Ozdoba i zabezpieczenie rawędzi otworu wejściowego.
I have a water collector installed on the gutter with diameter of 15cm during the summer, witch I remove for the winter. This is the cover for the hole in the eaves. Diameter of the hole is 42mm
Found this model of a human heart and wanted to make it into a planter for succulents/small house plants!
I have not tested with the rubber sweeper. I printed with 2 walls and 15% infill. I used 3 X 1.5" deck screws to attach to my mounting board. If flush mounting to the wall a spacer may be required to increase the standoff otherwise the…
My sprinklers were all very overgrown with grass so I made a 3" hole saw to help clear out the area. You put a 1/4-20 bolt in the center and use a nut to hold it in place. It does a good job of breaking up hard dirt and grass around the…
Reparaturteil des originalen Auslösehebels für die Füllstandsanzeige des Auffangkorbes. Etwas verstärkt im Vergleich zum Originalteil. Empfohlenes Material: ABS oder PETG. (PETG hielt zuletzt ca. 3 Jahre bei häufigem Gebrauch des Mähers)
i created hooks so I could attach our Christmas Icicle Lights tu our Gutter without drilling or anything else. I printed them in PETG for more flex while install with standard Prusa mk3S+ 0.2mm profile no supports needed
a foot for a pool ladder so keep it in place on a deck. The ladder just stands in it, but can not move while entering the pool. Ladder still ease removeable
Deutsch: Ringe um die Pflanzen im Mulch-Beet besser zu schützen. Das Wässern geht somit leichter und das Wasser fliesst weniger davon. Dazu sieht es noch sehr schön aus. Zusätzlich hat es noch an 4 Stellen kleine Löcher um den Ring mit…
This is a very simple plant pot with drainage. Inspired by succulents and other low growing plants Printed with 3 walls at 10% infill No support or brim needed Thank you for looking!
Broadcaster plate for some ride-behind yard fertilizer my dad has. They are 60$ retail to replace and the fertilizer will often wear through the plate. Would recommend printing with many perimeters and make sure it is abrasion resistant…
I needed to make a waterproof box for my M5 TimerCamera F. The Inside dimensions of the box are 99mm to fit the M5 TimerCAM with tailbat module connected, but feel free to resize it to your needs. I will be printing a small version (60%…
Note, most of the parts are compatible with the original tower system, so you can use those too. Some parts of the original system with a low bottom might not fit with the new parts that have an internal pipe, if the top part has low…
About the Model This is a simple yet effective rope slip protection designed for use with pulley systems. The model consists of two interlocking parts that are pressed together around the rope. Once secured, the device prevents the rope…
Mount for attaching a mason jar oil lamp torch onto a pole to create a tiki torch. Sized to fit pint sized mason jars. The torch holder clips onto a ¾" pole and allows for deformation at the end of the pole from hammering. I used ¾" steel…
Slides over lights mounted on the soffit with the 3M tape. Secures by covering the wire on both sides
To making the handling for our fairy lights a little bit easier, i made this clip. The clip is for perforated plates with 15x15mm holes.
It worked! I designed this thinking that it would be a way to recycle toilet paper rolls and I am always looking for things to start seeds in in the spring. It took a couple of tries to make sure that it held enough moisture and could…
This design is inspired by an old gutter clip that is no longer in production, modified to be easier to print. The original upload of this model recommended strategically placed support enforcers. This updated version requires no supports…
This is an adjustable thickness spacer for the Bolt Long Throw Double Locking Gate Lock Garage Rim Lock type latch readerly available on eBay and the like. it fits my lock and will likely fit all the others, they aren't made to any great…
Adapter for mounting thread to your water tank. Hole is 55.5 mm diameter. Thread is G1 1/4 BSPP
Here's my take on the pocket clip for Swiss Army Knives. The clip threads on to the corkscrew and holds the knife securely in your pocket. There's two versions: V1 is for regular SAK - here the clip rests on the side scale and allows a…
Ich habe eine komplett neue Version des Vogelhäuschen designed...schau doch mal vorbei : https://cults3d.com/:4502743 🐦 Falls ihr das Futterhäuschen wie ich auf einen Stiel setzen wollt und euch damit schwer tut, alles in Waage zu…
kivimaki's Tube Feeder was an immediate hit in my backyard and I quickly observed larger birds missing out on the fun. So…I created a perch ring of the same profile and added it to the base with enough structure to be sturdy. Fits on…
I needed to replace a broken handle on an old wooden window. I figure that it's faster to just design it and print it out than try to find a replacement. It worked out!
This device allows a person to place a rope, cord, string, or similar items over a branch or elevated object while staying safely on the ground. It features an acme thread connection, enabling it to be attached to standard broom handles…
Small Plant Pot for cloning (optimized drain holes) Update : New files added Eject Tool Pot Cover Stand for 12 Covers Print without support
Simple flint holder for your bushcraft knife or whatever... Its made for flints with 8 mm in diameter.
This is a model to setup a Ring stickup camera to a mailbox. My mailbox has a newspaper port that is used for this. This setup works pretty well, because it is a good view to the front of the house and besides the security advantages, you…
Clip to add metal chickenwire on your solar panels. These clips prevent birds from building their nests between your roof and solar panels. This model is designed to clip around the edge of the solar panel. Panel edge size: 40x8mm
