399 modeli
Extended baseplate for Makita Router, it give you more stability. If you need any other size, just send request I will make it. Note: real photos are without rotation mark because I added this later. Print instructions PLA Infill 25% Look…
Wydruk około 2,54 €–3,11 € nettoWstępna wycena jednego wariantu
Akro-Mils 20701 Bin: Fits in 10726, 10164, and 10144 units. One of mine got stepped on and broken, so I came up with this 'lil guy. This model is designed to be used with vase mode and should be a drop-in replacement except that they…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Fits Akro-Mils small plastic drawers, which can be found on a variety of Akro-Mils Plastic Bin Cabinets (i.e. 64 drawer, 48 drawer, etc.). Tray (vs. printed and/or stock dividers) prevents small parts from slipping underneath the…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
The lock system for cover for Meicho Versus fishing boxes. Use magnets in caps 10*6mm Print instructions Use the 0.15 layer height or lover. Your can print with 0.2 layer, but thread is not cool quality.
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
Adding to the skadis-system by Petri Damstén - this is a hexbit holder for the Stanley STHT070885 Multibit Screwdriver and nut setter. The hooks were created by Petri - which are required to attach the Stanley hexbit set to the skadis…
Wydruk około 3,82 €–4,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a guide bushing for the smaller holder for the makita router. One I intend to use to make finger joints. The annoying part is that the holes for the screws are not in a nice concentric circle around the axle of the router. So it…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
For mounting the GPU 3 M3 Screws are needed. For mounting it to the case any small wood screws can be used. Thanks for the help @JakobFriedl_909762
Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu
The mounting of the door tray failed on my BOSCH fridge. So here is a little Model to fix the broken mounting. This is a improved -more sturdier- Version 2. Printed with Prusament PETG Urban Grey . The print in the picture is from a MK4S…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Spacers to determine the distance when milling plasterboard. The first positions the milling machine 20 mm from the rail, the second one another 26 mm for the next milling. Two-color version
Wydruk około 2,77 €–3,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
use this stand if you want your Hazet Maintenance Unit mobile and not fixed to a wall. You will need 6 M6 bolts, washers and nuts as shown in the pictures and you have to mirror the strebelinks model if you don't use the presliced files.
Wydruk około 3,47 €–4,24 € nettoWstępna wycena jednego wariantu
This is a handy little box to store spare collets in. 2 compartments, one for 1/4" collets, and one for 3/8" collets. I designed this as I recently lost 4 spare collets. Given how small they are, they're easily lost, but with this box I'm…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
24cm radius jig for the Makita Router Circle Jig (RT0700CX4). Uses M6 Hex hardware
This is an enlarged base for the opoular Makita RT0700 Handheld Router. It makes it easier to guide the router on narrow pieces or at the edges. For a full description see my blog:…
This model is compatible with the lego system.
10" Rack mount for optiplex micro mini PCs
This model is compatible with the lego system.
Thule Fold Lock Anchor 40107011 For Urban Glide 2, Glide 2 a Urban Glide 2 Double.
Build this to add spaces between each piece. It might need some cleanup after printing, as the space tolerance isn't perfect, but it is doing the job. It should be compatible with other Dell OptiPlex Micro models as well, but try it out…
While building my own DIY CNC, I needed to cut some T-slots on the table so I can fix some clamps. I decided to design a new base for my Makita RT0701C so I could cut the slots equally spaced 3" apart. In the process of designing the base…
Update January 2025 Just a minor update after some feedbacks about a loose fit. It's easy to swap on purpose, but maybe it really was a little to dependent on the seam the old printer made. 😅 Anyways here's a slightly tighter version with…
This is a custom 3D printable shroud compatible with slim 92mm fans for the Powercolor Reaper AMD RX 9070 XT GPU. Can be printed on small build surfaces, I recommend PETG or ASA material. Easy to print and assemble, you just need fan…
This model was based on this work. but it has been redesigned to specifically fit the Dell Wyse 5070. I modeled this with a 0.5 mm tolerance. Print Settings that I use: Infill: 13% Layer Height: 0.2 mm Material: PLA (I know it's not…
Die Vorrichtung zum Planfräsen wurde während einigen Twitch Streams entworfen, modelliert und zusammengebaut. Sie wird mit einer Kantenfräse Makita RT0700C oder Makita DRT50Z verwendet. Das Planfräsen von Weichen Werkstoffen wie Holz,…
I modeled the original base plus two variation when extra surface area is needed when routing
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
I use a lot of Bosch Professional hand machines in my workshop and have a matching FSN 1100 guide rail. Unfortunately, my beloved Makita RT0700CX2J router does not fit this rail. Buying a Makita rail and a matching adapter is out of the…
Makita Oberfräse zu Führungsschiene von Makita / Makita Router to Makita guide rail Same like my version from Makita Oberfräse zu Führungsschiene Festool / Makita Router to Festool guide rail Category: Machine Tools
Deutsch: Die Idee für diesen Fräs-Jig kam mir, als ich dieses Video vom YouToube-Kanal “Gipfelholz” gesehen habe: Da ich keine Tischkreissäge habe, wollte ich das Teil statt dessen einfach drucken. Ich habe das Teil so konstruiert, dass…
print settings: 0,6 nozzle 0,25 layerheight formfutura rPETG with supports, orientation see photo
Replace the cable with a plugit adapter. The change is reversible. Needed: Festool replacement part # 489742 two #6-32 x ½'' machine screws To install: Mark which plugit adapter cable replace the black/white cable Remove the cable, strain…
10" Rack tray to hold a Dell Optiplex 5070 (although other Optiplex models should fit) but also with an option to add a keystone jack (see my other models if you want to test print the same port to test). ** NOTE: These Rack components…
I recommend printing it with PETG or ABS, as regular PLA will permanently deform under sustained pressure. To assemble it, you will need a 6-32 screw with at least 8mm in length.
If you like the Design leave a like and show some Love ;-) I remixed Thing 4581505 to fit for OSVAC and gave more volume to enable more Dust to pass through. Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Filament:…
This is my interpretation in Gauge 1 of the NS Zuurpottenwagen 520704 - N.V. Koninklijke Nederlandsche Zoutindustrie Boekelo. Before suitable corrosion resistant metal alloys were available to build tank cars, acids and…
Hi since i got an 10inch rack i wanted to rackmonut my mini Server in it. Unfortunatly there are only 19inch Rack mounts avalibile online i created my own for my Wyseclient 5070. Printed in ASA on my P1S i recommend ASA it could get hot…
My Chevy (Volt plug-in hybrid) has done me proud over the 9+ years of service, but it is starting to show signs of age. One of the little things that broke was my sun visor clip, so the visor swings back and forth depending on whether I'm…
Bigger base plate to hold the router with both hands – especially handy on narrow edges. To get an easy going router, print on a smooth bed sheet if possible. Prints with PETG or PLA, 0.3 mm layer height and at least 25% infill (grid).…
Slim casing for Nextion 7 inch NX8048T070. Designed for wall hanging.
This model is compatible with the lego system.
ReadMe.txt Fraesplatte für Makita RT0700CX2J Oberfräse Anwendung: Die Fraesplatte dient der grösseren auflage auf dem Werkstück beim Arbeiten mit der Makita Oberfraese. Dies ist ein Remake vdes Projektes "Baseplate for Makita RT0700…
This is the 6x6 All Terrain Tow Truck set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's…
A simple replacement plate for the router Print instructions nothing special
Hier ist meine Version einer Adapterplatte um die beliebte Makita Einhandfräse mit der Makita Führungsschiene sicher führen zu können. Ich habe es in PETG gedruckt. Sollte aber auch mit ABS/ASA gut funktionieren.
Remix of the “ Makita wrench grip ” by 3dhobbyist21 . Simple redesign of the original ones to not be round but more oval shaped and using the fuzzy skin option in Prusa Slicer (The 3mf file already contains the fuzzy skin modifier). The…
Bigger circual baseplate for Makita RT0700/RT0701 with rotation mark. If you need any other size, just send request I will make it. Note: real photos are without rotation mark because I added this later. Print instructions PLA Infill 25%…
remix pour etre imprimer sur les petites machines (200x200) Print Settings Printer: FLSun Q5 Rafts: No Supports: No Resolution: 0.15 Infill: 40% Filament: GT 3D Makers PLA Black Category: Machine Tools
A simple adapter to connect a Makita RT0700c to a Festool 36mm Cleantec hose. Festool end is based on PwnCNC’s design: https://www.thingiverse.com/thing:3818625 This print does not require supports. My print was PLA+ with 40% infill and…
Holder designed for fr150 CeNeCe (Alarsys) machine.
Zweihandhalter für die beliebte Kantenfräse von Makita. Ich finde es in manchen Situationen hilfreich die Kantenfräse mit zwei Händen zu führen und habe mir daher diesen Halter zum Führen mit beiden Händen überlegt. Dies soll eine erste…
sparepart spacer if you lost your Shimano crank spacers. nothing special
Cell holder for 20700 Li-ion cells from Dyson products. Remix from : https://www.thingiverse.com/thing:4700523
Base plates with 16mm copy ring for 10mm mills. I did the holes on the side of the ring as big as possible so that the dust collection still works. There are two sizes of the base, 100 and 120mm diameter. They can be used with the…
For more stability I have merged the MPCNC Tool Mount with a Makita Tool Holder. It fits with the 25mm version (metric). This Tool Mount can be used for MPCNC Burly and also for MPCNC PRIMO. Using 2 parts connected via screws resulted in…
ReadMe.txt Fraesplatte für Makita RT0700CX2J Oberfräse Anwendung: Die Fraesplatte dient der der Arbeit mit einer Frässchablone beim Arbeiten mit der Makita Oberfraese. Material: PLA Schichtdicke: 0,2mm Füllung: 75% Farbe: nach Belieben…
The Dell Wyse 5070 is a thin client with two DDR4 SODIMM slots one M.2 PCIe slot, and one M.2 SATA slot. Typically the PCIe M.2 slot has a wireless card installed, but I wanted a second Ethernet port so I could run opnSense on the machine…
A 2 part modular rack mount for the Dell Wyse 5070 mini PC. This mount is intended to be compatible with the 19-inch modular rack mount system Mauker designed. You can check out their collection to find other 19-inch mount modules. I…
Created with the R-customizer for the osVAC system, this adapts my router (a clone of the Makita RT0700) to the osVAC system. I will probably shorten the exhaust of the router so the total length of the dust collector and the connector…
Bauanleitung Fräsvorrichtung für die Makita RT0700 Fräse: -Compatible with: dewalt D26204K-QS. Update 20.04.2025: 32mm hole system guide aavakiable as an Add On https://www.printables.com/model/1249568-32mm-hole-system-add-on Update…
A pen holder for my MPCNC Primo build. It fits a 65 mm tool mount like Makita RT0700C. I have printed this solid bat i think you can do it a little infill... The basic idea was to quickly swap pen and spindle without having to remove the…
Einlegeplatte für die beliebte Makita Oberfräse RT0700 und deren Nachbau Katsu 101750. Die Montage des Kantenfräsmoduls in die Einlegeplatte erfolgt komplett ohne Werkzeug von oben. Anschließend wird die Oberfräse von unten eingeschoben…
This is a flatter version of the Dell Wyse 5070 Stand for faster printing and less material usage :) Must be printed with support for the posts. Update 02.02.2026: fixed the gap on the posts reduced the size of the base to match the Wyse…
Remix from https://www.thingiverse.com/thing:4861771 , added a CLEANTEC connector. Knob is from https://www.thingiverse.com/thing:3713327
very simple case for the HW-070 PWM module. pretty much it.
This is a 3D model to mount the RC070N 7in IPS display, inside your PC CASE! I took the Elecrow RC070N 7 inch, 600p, IPS, touch display for making this mod. The model was made with Solidworks 2020. It is a really snug fit, so no screws…
Here you can find holders for all devices and accessories of the Makita Router RT0700 (RT0700CX2J). Most of the time i'm using the router at my workshop, so i wanted have quick access to devices and accessories. I designed holders with…
This model is compatible with the lego system.
Print using PLA or PETG. Add a M4 screw with butterfly nut. For the centering pin I used a 3mm old drill bit which I cut to size (about 10 mm) and inserted to the base by heating it first. You can view the Onshape design at…
Mechanic fast for Meiho Versus 7070 & 7050 Print with PETG
Bracket and shroud to attach 2x 120mm fans on an Asus Prime RX 9070 XT GPU. Designed to be used with heated inserts, however STEP files are included so you can customize these to your own needs. It might fit on non XT 9070, however it…
I designed these insert plates for the makita RT700C Router. They help to minimze the gap between the milling tool and the support surface when the router is used upside down with the 195563-0 plunge base. This way, the tilting of the…
Designed for better handling during the milling process. the bigger one is designed to stabilized with an aluminium U-profile 11.5x12x1.5 (glued in) to get more stability. Printer: CR-10s pro Material: PETG Resolution: 0.2 wall: 4 infill:…
Like the original, but faceplate with rounded corners and even frame width
A simple design consisting of two threaded parts. It is made to support and lift the corner of a gpu to lighten the load on the connectors. Since it is threaded, the height can be adjusted. Minimum height is 67 mm while maximum is around…
Kopierring zum Anschrauben an den Makita RT0700 Oberfräsenanbausatz. 16mm für 6mm Fräser ----------------------------------------------------------------------------------------------------- Copy ring for makita RT0700 router. Just screw…
Hier zum nachdrucken eine Schonplatte für die allseits beliebte Kantenfräse von Makita. Da ich die Fräse auch gerne unterbaut als Tischfräse nutze ist mir vor kurzem die Schonplatte abhanden gekommen. Also ran an Onshape und eine neue…
Router baseplate to quickly make beadboards. Designed to be used with a Makita RT0700C and this router bit: Freud 20-301: 1/8" Radius Beadboard Bit System with 1/4" Shank To use the baseplate, notice that there is one edge with a square…
Larger or extended baseplate for the popular Makita RT0700 trimmer/router or similar models with the same built and dimensions like Katsu. Additionally, a knob is available which can be mounted in three different positions and the…
Extended baseplate for Makita Router with Copy Ring, it give you more stability and you can use with template. If you need any other size, just send request I will make it. Note: real photos are without rotation mark because I added this…
The original design is great, but I wanted some enhancements. Because the STL showed some faults after importing into CAD, I decided to re-draw the whole model. On the Frontframe, the mounting holes for the Sunton display got M3…
This is a simple adapter to allow the connection of a 35mm standard vaccum hose to the plastic dust collector of a Makita Router/Trimmer RT0700. Can be printed from PLA, ABS or PETG For more Information please visit:…
Holder anti-sag for RTX 4070 Gaming OC Gigabyte graphics card to prevent pcb cracking issues or especially when the PC is being transported. Printed on X1C Bambu lab, no support, 0.20, 3 walls, 25% Gyroide density. You'll need two M3x5mm…
This is a remix of uktricky’s Dell Optiplex 5070 with Keystone Port, redesigned for use with 12U server racks . It’s optimized to print on small 3D printers by breaking the model into more manageable sections. Assembly requires 8× M6…
‿︵‿︵ʚɞ『 Français 』ʚɞ‿︵‿︵ The description in English is below Attention Cet objet est un accessoire qui se monte sur un outil qui peut s'avérer dangereux et provoquer de graves blessures s'il venait à casser ou mal utilisé. Si vous…
This is a custom shroud for the Zotac RTX 3070ti Trinity GPU, using Arctic F9 PWM fans. It is possible this will work with other Zotac 30 series Trinity cards, but I cannot confirm. The stock card is undercooled and the fans are badly…
Ever thought about mounting a Small Form Factor Dell Optiplex 5070 motherboard in a full-sized tower? Do you dream of PCI slots not aligning correctly and needing custom adapters to make them fit? Are you an electronics hoarder itching to…
This is a deshroud bracket designed for the ASUS PRIME 5070 Ti/5080 series, featuring dual 120mm fans. It uses the original screws for mounting and requires only additional fan screws. For best results, use at least PETG or another…
Baseplate for Makita RT0700 Router. Drill for Hafele Rafix connectors.
🧾 Bill of Materials : MAIN PARTS Front panel (1x) Hex panel (2x) Column Support Middle (2x) Column Support End (2x) OPTIONAL PARTS additional Extra Column Supports Long Dowel Short Dowel 🖨 Printing Tips and Recommendations : Material:…
This model is compatible with the lego system.
Mounts to the wall using 4 "Poster Strip" sized command strips on each bracket and an optional nail through each mount. To mount you will need 2 Printed Mounts 8 "Poster Strip" Command Strips 1 M3 screw of at least 16mm 2 M3 Nuts 1 M3…
2x3 cell holder for 20700 Li-ion battery. 20700 are mainly used on Dyson products.
Simply an accurate replacement base plate for Makita RT0700 routers. To get an easy going router, print on a smooth bed sheet if possible. Prints with PETG or PLA, 0.3 mm layer height and at least 25% infill (grid).
This is a case for the Sunton 7" display [1]. I only used it for the non touch version, so i could be that it doesn't fit with the touch version of the display. You need 4xM3x8 screews and 4xM3 nuts. Just press the nuts into the Frame. It…
As seen on YouTube . Features Tool-less installation Zero-gap. Maximum static pressure 2 slot GPU height No supports needed Installation Guide For a complete step by step guide, visit EIGA/WORKS . Compatible Fans The custom shroud is…
With the permission of the autor, c4t0r, here is my remix of his design. Same function, same size, everything. I did this remix to be even easier to print. 3 parts, no supports needed, no aliminium part needed The only tricky part is…
An adapter to use a Festool vacuum with the Makita RT0700 router
1x6 cell holder for 20700 Li-ion battery. 20700 are mainly used on Dyson products.
