311 modeli
$100 for velocity stacks. No thanks. These will fit all Challenger models from the SXT to the Demon as long as they don't have the light tubes installed. On some models, you'll need to reach in behind the headlight and push in the 3 clips…
Wydruk około 8,72 €–10,66 € nettoWstępna wycena jednego wariantu
Die schmalen energy drink Dosen neigen bei unserem Ford Smax leider immer zum umkippen, da die recht groß dimensionierten Getränkehalter für kleiner Dosen nicht wirklich geeignet sind. Also habe ich Maß genommen und eine Art Reduzierhülse…
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
Andy's model modified to fit the Mini+ printer specifically: 1) increased the height to 25mm 2) widened the base to 23mm In this way the two risers fit perfectly into the slot left by the hinge of the display and even if you move the Mac…
Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu
Magnifier: Peak 2015 Mini Comparater 7X Thats is ok. Print Settings Material: EkoMb - Petrolblue Petg Nozzle: 0.4mm Layerheight: 0.2mm Post Process Not necessary
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 3-Way Elbow designed to…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are 4-Way and 5-Way Tees…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 4-Way Elbow designed to…
These canards were designed and oriented with inspiration from other functional designs for sale. The canards were designed to be printed standing up on the narrow end. It's not the easiest print because of this, but I didn't want the…
Designed to securely hold your iPhone 12 or newer while still allowing easy access to the cupholders and parking brake. No supports needed. Parts used: Apple MagSafe Charger (1m): MagSafe Charger (1 m) - Apple *note: this is the 2024 25W…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are 5-way and 6-way crosses…
This model is compatible with the lego system.
As any Colorado or Canyon truck owner knows, the first must have accessory is a tray/organizer to make the cavernous center console space a little more useful. This tray covers the entire console area for models without the USB charger…
F1 Mclaren MP4-30 2015 Steering Wheel. Mclaren MP4-30 2015 Steering Wheel full scale replica. 129 pieces relatively easy to print with the 0,4mm nozzle and simple assembly. It is a model that requires a little more time than a single…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are reconfigurable 22.5 & 45…
This adapter is tested with a motherboard from an Optiplex 3050 SFF, but it should be compatible with any SFF Optiplex motherboard from 2015 or newer. A reference image of a compatible motherboard is included. Printing Printed with 20%…
This is an adapter for a 2015-2020 F-150 front and rear door speakers to go from the OEM size to 6.5" drivers. Recommended print in PETG. I printed mine at 235c/70c @60mm/s Predrilled holes are lined up for Rockford Fosgate speakers, but…
Small remix of rear seat cupholders for 2015-2020 GMC Yukon/Chevrolet Tahoe, I added a GMC, Denali, and logo-less version. Enjoy! (Better pictures coming soon) Print Settings: eSun Black PLA+ filament 210/65 C 0.20 mm layer height Leave a…
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 3-Way Elbow that you…
Fits virtually any 52mm (2 1/16") gauge that uses the traditional ‘U' bracket for retention. Gauges with threaded bodies (like Equuis) are not guaranteed to fit or be tightenable. Has a 14x15mm passthrough on the bottom side to allow…
This is a 3D model of a trash can made specifically for Suzuki Vitara 2015 onwards models. It perfectly fits into any of the two existing cupholders in the centre console. It has a hinge that connects with a piece of 1,75mm standard…
z ⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on…
Should work for a left hand drive 2015-2020 Fit This is 6mm thick, which is probably way overkill. I imagine you could change to 3mm, and pick 4 outer walls in your slicer. That would give you 8 walls total and a very strong part. I…
Brodit design phone mount for Mazda 2 (DJ) 2015+ and CX3 Ball Phone Mount need 4 x M2.5 x 8mm to screw at the holder And need 4 brass insert M2.5 * 5 Recommend print with PETG or ABS . Holder V2 I just redesign with thicker body and use…
It just slides along the top of an iMac ;) I made mine for the 2017 27" 5k iMac with the “Thin Unibody” design, but it should work with really any 2012-2020 model iMac with the same basic body. All the little print does is sit in front of…
I lost one of my headlight washer caps, so I made new ones printed in TPU matte 95a. Left and right are adjusted separately for a good fit. To fit them on the washers just pull the washer out firmly and set the new cap in place. I printed…
This model was originally found on Thingiverse by a maker named Vizionfilm. I originally modified this model in Tinkercad back in 2020 to accommodate my needs in my truck. The model was shortened to allow access to the 8" screen radio in…
Pgobel's original tray, but with a spot cut out of the corner for models with the USB in the center console.
Replace the stock blank cover on the overhead console to now add (4) 12mm switches. If you have the interior sensors (found on higher trimmed trucks), you will need to remix my design to add those holes. I have a XLT which does not have…
This extension tube goes under the front seat of an F-150, F-250, F-350, or Ford Expedition. This extends the vent further to the rear seat for better airflow.
This is a Beam.NG mod conversion, it is a 2015 Chevy Spark LT. The model is hollow and solid for 3d printing with some custom wheels that I made for it. Enjoy and happy printing!!! Note: model shown in pictures is a modified version, made…
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings recommended to do a color change by script at height 3.50mm and use a prime pillar Category: Keychains
Replacement cargo net latch for a 2016 Ford Edge. I got tired of buying new cargo net latches when they broke.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Needed more space for my water canister and regular drinks. Made this dual cup holder to add an additional space for a third drink. Made the dual cup holder in three pieces in order to make printing easier. No support needed. Print…
Have a look at the complete skeleton here: https://skfb.ly/p7uv7 3D scan of a Protoceratops ( Protoceratops andrewsi ) skeleton. Protoceratops andrewsi was a horned dinosaur (Ceratopsia) the same group to which the Triceratops also…
I built these 2015-2017 Mustang Cup and Accessory Tray Protectors to be inserted in the existing rubber protectors. These can be easily removed, cleaned and reinstalled without having to remove the rubber parts. I printed these on the…
use organic support
Überlaufrohr für einen Frischwassertank (25 l) im Wohnwagen. Daten: BSP - Rohrgewinde 1/2" Bereich G 1/2-14 Klasse B Rechtsgewinde Wenn es euch gefällt, lasst mir bitte ein Like da.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Designed to securely hold your iPhone 12 or newer while still allowing easy access to the cupholders and parking brake. No supports needed. Parts used: Apple MagSafe Charger (1m): MagSafe Charger (1 m) - Apple *note: this is the 2024 25W…
This is an adjustable glovebox organizer for 2015–2022 Chevrolet Colorado and GMC Canyon trucks. You will need to print: 1 Top; The Full model (355mm x 194mm) is only if you'd like to cut it a different way than the pieces provided. The…
Ford mustang GT 2015 silueta
Changed it a bit in the middle so it fits a 2015 15" Macbook Pro instead. It's a little wider than the 2016 model. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.28 Infill: 10 Filament:…
The drink holders seem way too big in my 2015 Highlander allowing drinks to tip over. I purchased it used, so maybe I am missing something that came with the vehicle. This print has worked out nicely for me. I secured it with some picture…
Eine Abdeckung für die Getränkehalter in der Mittelkonsole beim VW TOuran II ab BJ 2015
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Simple 3D printed mount for 2005-2015 Tacoma's with the Garage Door Opener flap in the overhead console. It discretely hides an Auxbeam 8-Gang switch panel away from view and is super solid when down. Allows for a stealthy installation of…
Overview Adapter for the Dell stock heatsink to a 120mm PWM fan for the Dell Optiplex series 5 (2015-2020). (Check out wikipedia for an overview of optiplex generations). This makes the computer a lot quieter. The fan barely fits, so…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Tired of your center console's coin tray sliding and slamming on every corner? Here ya go!! This has been the most functional and worth while print that I have done since starting. No more “BAM” on every corner.
You can support us by purchasing our paid model to get more free products.
Note that this model is in inches. This is a customized speaker mount adapter for a 2015 Kia Sportage. This is designed to fit 6.75 inch speakers. It was made using https://www.thingiverse.com/thing:2924217 . I had to add mount tabs to…
I broke my original latch on my 2012 F-150. I remixed this and made the pins braces a little narrower to make it easier to put in i also removed the 3d printed spring part and reinforced the pins instead this was still a very tight fit…
Original rimcover were boring, so i created these ;)
Designed my own feet for the Macbook Pro. Didn't see anyhting that worked well for my model so designed my own. I recommend using flex PLA. Category: Computer
!!! DO NOT EVER, EVER, EVER! PRINT CAR PARTS WITH PLA !!! PLA WILL reach glassing temperatures on hot sunny days, no matter WHERE in the car the part goes. PETG, ABS, or other similar higher-temp filament is REQUIRED With that safety…
This is an adapter plate to mount a NOCO 120V power inlet on the rear underside of a full size Ford Transit 2015+ It uses an existing rectangular cutout that is covered with a plastic cap from the factory. Print instructions I used (4)…
REMIXED version of another phone holder. This version fits many MagSafe iPhone chargers that have a ball narrowed by a nut on the back. You have to remove the ball and tighten the nut through the hole in the holder. This version, V2, is…
Krampus - Christmas Devil - 2015 3D printable model.
Western Movies - The Hateful Eight - 2015 3D printable model.
Print in ABS. Fits cans, water bottles, gatorade bottles and 40oz containers, Starbucks cups, McDs fountain drink cups. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Yes Supports: No Resolution: .2 Infill: 100% Notes: Print…
Print with z axis along the rotational axis of the latch. Use supports. From my experience, it takes a good amount of force to install. Align the spring as shown, insert one pin/side first, then push. Note: I don't have a Honda Jazz so I…
Maqueta para imprimir del alerón del Ferrari SF15-T de 2015
This thing removes the P2015 error and engine error. I printed this in ABS with 99% Infill. Category: Automotive
My early 2015 Retina MacBook Pro (13 inch) still works great, but the display broke. Instead of getting a replacement display, I went the cheaper route to attach an external monitor and use it as a desktop computer for my kid. Some call…
this is a Pesa TWIST 2015N polish tram that i made a few monts prior, that i really like. The black parts have been poorly made, but feel free to modify them by your needs, also please modify the tram so that it can enter and print…
Western Movies - Bone Tomahawk - 2015 3D printable model.
Used to stop the alarm as well as bring a classy look to your rig. Print all the same color or customize the colors.Prints without supports but may need a bit of trimming once printed. Please rate and review.
My SO's 2015 Toyota Corolla didn't have any indicators for the trunk and gas levers so I created these quick slide on indicators for them. Printed with Hatchbox Green PLA at 0.2mm layer height, probably should have used PETG instead due…
Self-attaching Mustang 2015+ front bumper logo. 2 grooves for 3m tape (optional). Should be slightly bent while hot
I designed it for my son, it's fully printable in various colors (base White or Black) I also added two holes, approximately 10mm by 1mm, on the base to attach neodymium magnets. Here's the link: Round Magnet Neodymium 10mm x 1mm…
All files including design files are on my github (https://github.com/gx1400/3dprint_subaruoutback_consolemount) Be sure to print in PETG to be more temperature tolerant # Changelog 2022-12-13 - Initial Commit ## Design Autocad Fusion 360…
Dlžka tlače 31min, tlačené z petg 0,2. Rozobrať obmedzovač, vymeniť za zodraté stare plasty. Pohyb dverí je tuhší, predpokladám, že sa skôr vyderu, ako originaly.
Used to hold grocery bags/etc on the passenger side of a F-150
The storage tray on the 2015 and later Suzuki Vitara models is pretty nice and roomy, but it lacks depth. As a result, I kept hitting my phone when the charging cable was plugged in. This model builds on the Storage tray from ciskje and…
Western Movies - The Revenant - 2015 3D printable model.
Clip mount v2 Having the original model in place these last couple of months, I liked the simplicity, but truth be told I missed having the vent accessible. So here is an updated version that straddles the emergency lights button and…
Subaru WRX STI 2015-2018 wall art
Washer/Wiper fluid cap for 2015 Cadillac ATS. I printed mine at 0.3mm layer height. Supports used for inside rim of cap, but blocked supports for the bottom emblem. You will need to use a heat resistant filament (NOT PLA). I used PETG,…
Made this to fit longer LED light bulbs. Still requires the gasket. I use them on my 2016 Chevy Colorado high and low beams. Printed in ABS. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: .2…
You have to print this part with high temperature resistance filament - ASA, PC, Nylon, because of high temperature in summer.
Ash vs Evil Dead - Pablo Simon Boliva (Ray Santiago) - 2015-2018 3D printable model.
This is a 3D printable replacement key fob case designed to fit the OEM internals from a 2015–2020 Chevy Colorado or GMC Canyon. It may also be compatible with other GM vehicles using the same fob design (see compatibility list below).…
If the measurements are off, let me know. I had two photos to go off of and used a nickel (21.21mm) for scale! :D
This mount fits the Pi 3B (v.1.2) without crushing any surface mount components on the board and without impeding access to the Pi camera connector or the GPIO header. Can be used with a 5V Noctua fan powered directly from the GPIO…
I wanted to hang grocery bags in the front of my truck for the ride home from the grocery store. This works great for my 2015 Nissan Titan. I believe that it will fit 2010-2015 .
Fits a classic 32oz Nalgene water bottle in the center console of a 2015/2016 Honda CRV, using the smaller rectangular section of the console to not block the main cup holders when not in use. Print in the provided orientation with…
This is a straight driving ETV (Egg Transport Vehicle) for the 2015 division C Science Olympiad, Scrambler. It should be fully rules complaint but check dimensions before using this design. Note: At time of upload, the design has not been…
I like temporarily storing things in the cupholder of my car, however often while driving the things start falling around in the cupholder, so they get in the way if I want to put a cup or a can in it. So I designed this insert, which…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are Nintendo 64 video game…
This is a steerable ETV (Egg Transport Vehicle) for the 2015 division C Science Olympiad, Scrambler. It should be fully rules complaint but check dimensions before using this design. Note: At time of upload, the design has not been tested…
Fixes well documented Intake Manifold Flap Fault Code (P2015 / 18447) on VAG 2.0 CR TDi Engines. This is for use on engines with Plastic Inlet Manifolds (03L 129 711 AG) Use a heat resistant filament, i used PA-CF (PETG started to warp…
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
I wanted a way to use my nice 10oz Yeti Rambler cups in my 2018 WRX, so I made this adapter. Demo: https://streamable.com/kddy6 For this cup: https://www.yeti.com/en_US/drinkware/rambler-10-oz-lowball/YRAMLOW10.html Category: Automotive
Printed with PETG to support higher temperature in the car during hot season. I used a tree support. Printed 100% infill with 0.24 resolution.
