4006 modeli
Can be printed as is, without supports The design itself is based on the model by Juliuis3E8 on thingiverse. Main difference is that my design is a single piece print and I added some minor tweaks (like the windows) and an extension of…
Wydruk około 14,19 €–17,35 € nettoWstępna wycena jednego wariantu
Hello, Today I have a New Year's Headband for you 2026 . A great accessory for a New Year's party. Suitable for group photos. I used ASA/PETG as the material. No need to use supports!!! If you are interested in my work, the links are…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
Hello, Today I have Happy New Year 2026 glasses for you. They are suitable for every party! They will make every New Year's photoshoot special. You also have a model for children from me. Good luck with the printing! I used PLA/PETG as…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
Make sure the cam is mounted securely before using to the avoid risk of tearing the flatflex. Contrary to other designs the grabbing teeth have a tiny angle to them, they get thicker in the middle. This allows for slight off-center usage…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Make a statement with these 26 english letter beads, perfect for hoodie cords. Also includes ampersand ( & ), exclamation mark ( ! ), plus ( + ) and minus/dash ( - ) signs. Print Instructions 0.1 mm layer height 3 perimeters concentric…
Wydruk około 3,12 €–3,81 € nettoWstępna wycena jednego wariantu
This is an enclosure for this board from Waveshare with POE-module and OV2640-camera which you can get on Ali and other sources. not fancy or pretty, but functional, lightweight, space-saving and filament-saving ;P Addons I also made an…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
EN: This compact housing is designed for an LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4. It is based on F-Square's multi sensor design , but is a new development except for the rear ball joint . The radar…
Wydruk około 1,61 €–1,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small mitre box with a 1 inch / 26 millimeter channel for 45 and 90 degree cuts.
Wydruk około 4,58 €–5,59 € nettoWstępna wycena jednego wariantu
Tablettenbox für die ganze Woche mit jeweils einem Fach pro Tag, die Box hat einen Durchmesser von 90mm und ist 26mm hoch. Die Box ist mit Magneten 3x2mm versehen https://www.amazon.de/dp/B00TACKU0O Die Box ist komplett mit Magneten…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
Use ASA,ABS, PA6 , print with support easy installation with direct taping screws 2.5mm diameter and 3.5mm screws or epoxy glue
Wydruk około 4,45 €–5,44 € nettoWstępna wycena jednego wariantu
This model replaces the original mudguard with the integrated chainguard. Just removing the OEM one doesn't do the trick, as oil/grease/dirt from the chain will be yeeted everywhere. With this chainguard the back not only looks cleaner,…
Wydruk około 4,46 €–5,45 € nettoWstępna wycena jednego wariantu
This is my slingshot Zlin 526 AS in multicolor. I printed it on a Prusa i3 MK2s MultiMaterial. I printed in PLA, but i do recommend PETG, because its more flexible. Add one (normaly only one is needed!!) M10 Nut into the upper-forward…
Wydruk około 4,44 €–5,42 € nettoWstępna wycena jednego wariantu
This is a bezel with press pad for 0.96" 126x64 I2C OLEDs (about 25,3x26mm) that can be mounted “hole only” (5 holes) on a panel. M2 screws with washers and nuts are used for attachment.
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This reusable zip tie set is designed for PLA and can be opened and reused multiple times without breaking ♻ ⚡ Each zip tie uses only ~0,7g of material and takes about 4 minutes to print, making it fast and efficient to produce. 🔧 Perfect…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
M104 S260 ; set the current hotend temperature to 260 degrees Ender 3v2 neo
Wydruk około 2,88 €–3,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Eine alternative Babyphone Betthalterung für das Babyphone Philips Avent SCD845/26. Sollte die V.1. einen zu steilen Winkel haben kann diese an der ggü. Seite des Babybettes installiert werden. See also my other bed mounts:…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
If you're a fan of IKEA furniture, you may have encountered a situation where you have an old and a new version of the same product, and they don't quite match up. This was the case for me when I had both an old and a new IKEA KALLAX 2x2,…
Wydruk około 6,82 €–8,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
normální PF pro rok 2026 které se dá využít i jako ozdobička na vánoční stromeček je tu i připravené 3mf s přednastavenými optimálními hodnotami pro tisk
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
Design Concept The Happy New Year 2026 Keychain features a playful and vibrant design with bold numbers to celebrate the upcoming year. Its simplicity and pop design make it perfect for anyone looking to add a festive flair to their keys…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
The 3D model is used to divide the IKEA KUGGIS box into 3 compartments. This means that several items can be stored there without everything getting mixed up and/or you need several boxes for neat separation. Please leave a like if you…
Wydruk około 3,77 €–4,60 € nettoWstępna wycena jednego wariantu
A tool rack to hold the Wiha 26491 5-Piece Ball Metric End Hex Driver Set. Meant to be affixed to the front of a 19mm or 3/4" shelf with 2 drywall screws. Print instructions .2mm layer height, 20% infill, PETG or whatever should be fine.…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just a miniature rake + extension to get the little bits from under your printer. 8mm tall fits anywhere. No support
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Because it broke and would break again, I designed this hitch raplacement eliminating further frustration. Trailer part in PLA surprisingly rigid even with the openings. more beefy grips firmly easy to use for the kids much freedom when…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena jednego wariantu
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
Wydruk około 0,96 €–1,18 € nettoWstępna wycena jednego wariantu
The diameter of the retaining circle is 70.82mm. The fixing holes are 5mm. In the photos I fixed the support temporarily with Patafix / Blu-Tack Print in PLA, 0,15mm, with support
Wydruk około 3,25 €–3,97 € nettoWstępna wycena jednego wariantu
In the slicer, the pot and feets must be rotated until it fits into the print bed, it is very tight so that the shell can be printed as large as possible on an MK4 or MK3S+. A rotation of 27° or 333° fits on the print bed. No support is…
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
This Lucky Charm you can print with an MMU-printer , it is easy and fast to print and not much filament is needed. I use “Prusament PLA Galaxy Green” for the leaf, “Prusament PLA Blend Oh My Gold” for “2026” and for the ladybug I use…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
Zlin Z-226 model. Used it to learn transfering 2D blueprints into 3D models.
Wydruk około 8,47 €–10,35 € nettoWstępna wycena jednego wariantu
Dyspenser do zaklejek na przestrzeliny z dodanymi napisami i oznaczeniami strzelnicy Braterstwo W23.
Wydruk około 1,00 €–1,23 € nettoWstępna wycena jednego wariantu
Deutsch Ersatzteil 1121 084 4100 Schieber Sommer/Winter Stihl 024/026 Gedruckt in: PETG Schichthohe: 0,15mm Düsen-Ø: 0,4mm Infill: 100% Update: gcode mit ASA hinzugefüht English Spare part 1121 084 4100 Slider summer/winter Stihl 024/026…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Belt holster for said USB battery. I designed this so that I could use this to power my Vive Pro wireless VR HMD longer than the stock battery. Print instructions Holster is a separate scad file and dimensions can be freely adjusted if…
Wydruk około 6,97 €–8,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Clona (kšilt) na svítilnu Fenix BC26R pomáha snížit oslnění účastníků provozu v protisměru. Doplnil jsem i logo firmy Fenix, které lze v projektu odstranit. Model je prototyp, který bude teprve testován v terénu. Doplňující clonu…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
IMPORTANT: You need to add this to Line 20 of the G-code: M302 S85 This allows the Printer to do the Cold Pull. Be aware, that this is normally deactivated due to Security, since a Cold pull is pretty hard on the Printer, and should only…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
I build a fan controller using a Seeeduino Xiao microcontroller soldered to an ElectroCookie Mini PCB Prototype Board . I wanted a small case for this and similar projects such as those using an ESP32 D1 Mini or ESP8266 D1 Mini. There is…
Wydruk około 2,47 €–3,02 € nettoWstępna wycena jednego wariantu
This is a holder to attach an Anker PowerCore+ 26800 PD to an IKEA Skadis plate. Nothing very special about it. Printed it myself in PETG. 0.2mm layer height 0.4mm nozzle Filament used: https://amzn.to/3J4QhE3 - awesome material. Prints…
Wydruk około 1,42 €–1,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This allows you to save your steel bearings for a project that needs them. Printed roller bearings are sufficient for this light duty task. Print instructions Replacement bearings for print 2622 auto-rewind-spool-holder-for-mmu by Martin…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
Doraz ke kleštím Knipex 1262180 , podobný originálu, trochu upravený pro lepší tisk. Materiál PLA ( mám lepší zkušenost než PET) tryska 0,4 vrstva 0,1 Menší trysku na vyzkoušení nemám. zkuste i s jiným nastavení a dejte mi vědět výsledek.…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
I saw a bunch of mounts for a C270 type of camera for my Prusa i3 MK3S but I had bought a C525. I didn't realize it at the time but the C270 has a screw that allows you to remove the folding mount so you can use the hinge to mount it to…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Klüber Microlube GL 261 (40g tube) LM8UU applicator needs supports
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
Hello, Today I have for you T oothpicks, canapés, party . Suitable for skewering canapés. Decorates any food. Good for celebrating the new year 2026!!! Good printing! I used PLA/PETG as the material. No need to use supports!!! If you are…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
this is a cup. Is a 3d model of reel cup.
Wydruk około 4,27 €–5,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A fan mount for the Fujitsu D2607. It fits 40x40 mm fans of any depth. This design is only suitable for use in systems where the Fujitsu D2607 is mounted “normally”, like in common consumer cases, due to gravity holding it in place. I…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
If your compass cover has disintegrated like mine then you can just print a new one or download the free file and get it. Not sure if this compass came with Macgregors but this is the one that came with mine. Dimensions are I.D = 125mm ,…
Wydruk około 12,69 €–15,52 € nettoWstępna wycena jednego wariantu
There is always some condensed water on the bottom of the cooling box and I don't want my food lying inside it. This is a Grid to put inside, so the food is distanced about 5mm to the bottom of the cooling box. Total Inside measurements:…
Wydruk około 2,07 €–2,53 € nettoWstępna wycena jednego wariantu
Hi, Sinar lens board (139x139mm) with ~26,3mm hole, the circle which is “deeper” is 20mm deep and have 100mm diameter. Print in PLA laying on the front with supports inside the ring. 27.05.2025 / Added version with 30mm depth ring.
Wydruk około 4,45 €–5,43 € nettoWstępna wycena jednego wariantu
(DK) Skruefri kasse til CC26X2R1 ZigBee Board. Udskriv langsomt, min tid 4,5 timer for begge (EN) Screwless case for the CC26X2R1 ZigBee Board. Print slowly, my time 4.5 hours for both Buy LAUNCHXL-CC26X2R1 Website: Robotnet.dk Rbx.dk…
Wydruk około 3,84 €–4,70 € nettoWstępna wycena jednego wariantu
With this adapter you can store the Dyson Musclehead floor tool in the storage clip of a Dyson DC26 vacuum cleaner. You might also like this Dyson hose adapter: https://www.prusaprinters.org/prints/19902
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
NFF Super Eagles – Nigeria National Football Crest (Bas-Relief Edition) : World Cup 2026
Wydruk około 4,29 €–5,24 € nettoWstępna wycena jednego wariantu
An alternative baby phone bed mount for the baby phone Philips Avent SCD845/26: The holder can be mounted anywhere on the side of the baby bed. In addition to the two parts, you need four M3 screws with nuts. Suitable for baby beds with…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
The injection molded plastic housing that comes with the Paradise GL22627BK Landscape Pathway Light typically cracks/falls apart after 1-2 years. I modeled a replacement with the main difference from the original is I used external fuzzy…
Wydruk około 5,39 €–6,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It has mount, maybe stick it with glue (depends on you). Need supports.
Wydruk około 3,01 €–3,68 € nettoWstępna wycena jednego wariantu
A safe way to cover up light bulb sockets that will still be powered but not hold a light bulb, ex. a multi-bulb fixture with fewer bulbs inserted to reduce brightness. Should fit a standard (NA) light bulb socket. Recommended Print…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Adapter for pressure/vacuum testing Stihl chainsaws. Port should work with 1/8" to 1/4" line.
Wydruk około 1,24 €–1,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Zátka pro otvor s průměrem 26 mm
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description This is a replacement part for the Dyson DC26 left wheel. I accidentally broke the Dyson DC26 left wheel but couldn't find any replacement part, so I designed this. This replacement model has a different shape than the…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
decided to make an volvo logo that fits on the volvo 242 front grill to look more like oem I used prusa xl for printer and i print the second file that has 2 emblems because i wanted to see if it prints better mirrored on the bed . The…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Box for two 26650 batteries. Printed with standard .20 SPEED profile on a MK4S with generic PLA.
Wydruk około 1,96 €–2,40 € nettoWstępna wycena jednego wariantu
The USB stick is fragile and the USB port tends to bend easily as the protective plastic around the stick opens very easily I designed a simple 3D model that prevents the cover from opening and limits the possible looseness that allows…
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 5,18 €–6,33 € nettoWstępna wycena jednego wariantu
Mopar part #4034226 Sliding door pillar mounted courtesy lamp lens for DODGE B150 B250 B350 Van 1978-1993 Original designer: Chrysler Corporation, Detroit MI, USA. Original or reproduction part not available. Printed in PETG. White…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[EN] In-Line signal line status indicator for sensors with M8 connectors in 3-pin and 4-pin versions. These indicators make it easy to adjust sensors in locations where the design of the equipment makes it impossible to use an indicator…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Caution there a different sizes of those legs. Mine was 20mm wide and 26mm long.
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 6,14 €–7,51 € nettoWstępna wycena jednego wariantu
I needed a mountingplate for the LANTRO JS IDC26P-B adapter ( https://www.amazon.de/gp/product/B0946ZFHB8/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 ), so i designed this one. I used M3x4x5 threaded inserts and M3 screws for it and…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The centre character has a slightly goofier expression and an awkward grin due to his disastrous loss in the Nov 3rd 2026, midterm elections.
Wydruk około 2,58 €–3,16 € nettoWstępna wycena jednego wariantu
A custom-designed wall mount for the ESPHome 8266 Temp/Humidity/Light Sensor , providing a secure and neat installation. This mount allows easy access to the sensor while keeping it organized and functional in any room. Designed to be…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
holder for glue with a diameter of 26 mm. It can be glued to the table leg
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Needed a proper angled mount to store and display my headphones. I meassured out the angle of my ceiling (see picture) and designed a sturdy 3 part ceiling mount. There are spacers in the back, for my wall/ceiling I designed the spacer to…
Wydruk około 3,14 €–3,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hellou! Today I have for you a Beautiful Winter Snowman 2026 . It is a beautiful snowman ready for color printing, as well as for monochrome printing. The individual parts need to be glued together. Some parts need to be colored by hand…
Wydruk około 5,27 €–6,44 € nettoWstępna wycena jednego wariantu
Today’s design is a bike lock holder made specifically for foldable bike locks . It consists of two PLA plates (top & bottom) and two tube adapters that clamp securely onto the bike frame. The holder attaches using hex screws mounted in…
Wydruk około 5,56 €–6,79 € nettoWstępna wycena jednego wariantu
>>YouPlaylisttube zu dieser Modell Beschreibung<< >> bilingual/english version availabe as PDF at github Der Pelletwächter ermöglicht es, den täglichen Pelletverbrauch einer Pelletheizung zur erfassen und anzuzeigen. Er warnt bevor die…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My Beatbot iSkim 2026 kept getting stuck on a shallow step in my pool, so I designed extended bumper/legs that attach onto the robot's existing legs to add clearance and stop it from beaching itself. No modification to the iSkim required.…
Wydruk około 1,72 €–2,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introduction Social bookmarking sites remain a useful part of an off-page SEO strategy when you use them correctly. They allow users to save, organize, discover, and share web pages around specific interests. For SEO professionals, these…
Wydruk około 2,87 €–3,50 € nettoWstępna wycena jednego wariantu
A compact and satisfying G26-style fidget keychain featuring a smooth, functional sliding top. Designed for stress relief, display, or everyday carry, this mini model keeps the iconic look while staying completely safe, non-functional,…
Rexo is the ultimate chibi dino pal—big smile, chunky tail, and all the charm of a prehistoric plushie. Whether you're looking for a quick print or a colorful desk mascot, Rexo has a version for every print mood!
Źródło oznaczyło ten model jako treść 18+.
Please leave a like if you enjoyed the model or it helped you. :) Remixed from : https://www.thingiverse.com/thing:4715615 Started off by making it a bit easier to print by adding a slopes to some of the overhangs. Then ended up taking…
Overview I've designed a few filament drybox solutions in the past, but I've never been completely happy with those systems. For this brand new design I set out to create a drybox system that meets all of my requirements and fits…
If you would like to buy a set of these laser cut from acrylic feel free to contact me via [email protected] I've modeled the track outlines for every circuit Formula 1 will go to for the 2026 season Edit 1/9/2018 I fixed the scale for…
Źródło oznaczyło ten model jako treść 18+.
3D scan of skull found on the Battle of Visby, where on 27th of July 1361 the Danes fought Gutnic Peasants. The human skull found at the Battle of Visby is a grim reminder of the brutality of medieval warfare. The skull shows clear…
Introduction This is a simple PC mainboard frame/tray system intended for open-air or custom enclosure PC builds. The intent is to support a broad variety of mainboards from iTX to so-called EATX with modules that fasten together with M4…
A remix of SE3D model. (14Jun26) New folder organization (25May26) Added frontSkeletonCanvas, frontSkeletonCanvasNotFanScrews and frontVCanvas. Need 5x3mm magnet. Three preliminary front covers for Canvas compatibility. The second cover…
UPDATE: (29/01/26) There is a totally new (re-worked / re-made) Mk.2 version available now. I have made 3 versions: a standard 70mm maker (like this one), a 70mm Duo version (make 2 at a time), and a 90mm Large version. Go to my main page…
UPDATE April 23-24, 2024 — Remodeled how the retainer clip is attached, to get better grip strength. This involved a remix of both the chain link and the clip. Version 1.14 and up has this. Also, added two new sets. Original was renamed…
This is a Temperature project for PETG with temperatures starting at 220 to 265. Just open the project, insert the filament, and print. The temperatures will change automatically.
Original version was printed in PLA on Prusa Mini+ with 0.2 layer, zero top layers and 4 perimeters. 2026 update (v2) – Updated version features a slightly thicker bottom and a bevel around the base for improved durability and handling.…
This Dual Sticker Organizer Box was designed to help organize and store up to 300 World Cup stickers in a simple and practical way. The model includes a box with two compartments and a stand , keeping sticker stacks organized and easy to…
Lucky charm gift for New Year's Eve with a function! The coin included in the horseshoe clip for the keychain can be used as a token for any shopping cart. On the coin is on one side a shamrock on the other side the number 26 for 2026…
🏎🏍3D tisk – Stolní kalendář Formule 1 2026 Stylový stolní kalendář inspirovaný sezónou Formule 1 2026, navržený pro 3D tisk. Ideální pro fanoušky motorsportu, kteří chtějí mít přehled o závodním roce přímo na pracovním stole nebo v dílně.…
Hi, I have designed the Fifteen52 Tarmac alloy wheel from scratch in fusion 360 to better suit an rc car, the material (PLA+), the printing process (FDM) and still retain the famous design. The wheel is designed to be printed face down…
Galaxy S26, S26 Plus and S26 Ultra cases. Print in TPU of your choice with SNUG type support at 30 degree overhand threshold. These models are based on official 3d models from Samsung and have 0.2 mm clearance around the phones. To…
I'm adding a tool for fine-tuning the focus of the OV2640 camera module. Currently, I have designed a bracket only for the first 3 commonly used lenses for the OV2640. Support for OV8225 camera lenses will be added in the future. WARNING!…
John Stewarts Ring from the up coming Green Lanterns HBO series. Not 100% accurate as only based on one shot from the teaser trailer.
A collection of 26 snowflakes with hanging loops for decoration purposes, all about 9 centimeters big. More big designs ↑ Link: big 23 Snowflakes Smaller, 5 cm, designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34 Snowflake…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
I remixed this often used rubber duck model for a Disney Cruise that we have planned. One of the activities that our kids love, is hiding and finding ducks around the ship. In addition, my kids have loved using these ducks to duck jeeps…
You can buy these from me here! Consider supporting us on Patreon! These are battery holders that can hold (2) 18650/(4) 18350, (2) 21700, (2) 26650, and (2) 26800. I print these out of PETG for the toughness. My builds use a 0.6mm nozzle…
3D model of party glasses for celebrating the arrival of the new year 2026. Printing: Print takes about 1h12min on CORE One and I recommend to use color-change during print, e.g. first 7 layers with one color and rest with black color.…
I tried the other available models in my camera, but they were far too large to allow the door to close. I also noted that the bottom portion of the cartridge had a raised section (to mirror the top) which seemed to be unecessary in the…
![Modular ITX/DTX/mATX/ATX/SSI-EEB/SSI-CEB/EATX/XL-ATX mainboard frame/tray [Updated 2026-07-19]](https://media.printables.com/media/prints/35720/images/1199286_159f781c-d9e2-4896-be13-5668e22d36a3/eatxv3.jpg)
