1395 modeli
I printed with PETG, 15% infill, 0.20mm quality settings, no support. I printed these standing up as they would be mounted on a wall. The notch was made in PrusaSlicer using the “add negative volume/box” tool.
Wydruk około 1,19 €–1,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A 3D printable wall mount designed for Hilti NURON 22V power tools such as drills, saws, and impact drivers.
Wydruk około 1,33 €–1,63 € nettoWstępna wycena jednego wariantu
I created a bracket for the Parkside 12V wall charger IKEA Skadis. You need to print in portrait, use supports and I recommend a brim. You can use my attached 3mf file where everything is properly set up and tested. I recommend first…
Wydruk około 1,69 €–2,06 € nettoWstępna wycena jednego wariantu
Gerändelte 12V Zigarettenanzünder Abdeckung Designed für Skoda Octavia - natürlich auch universell einsetzbar. Mir gefiel am Ende die Version mit mittelfeinen Rändeln (Version “mid”). Tip: Einen guten Alu-Drehteil look erzielt man mit…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
This battery cap will hold itself in place with small tabs “hugging” the Battery posts. The specific design is for the N70T Deep cycle design. This deep cycle battery has secondary smaller 8mm threaded posts for attaching inverters, solar…
Wydruk około 2,14 €–2,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Case side and gear modified to work with Greartisan DC 12V 120RPM Geared Motor JSX69-370 6mm shaft Used m3x8 scews for motor mount The part that holds the tape made 26.2mm for 3m super 33+ tape. https://www.amazon.com/dp/B071XG53B4 Still…
Wydruk około 1,91 €–2,34 € nettoWstępna wycena jednego wariantu
La perceuse visseuse Bosch GSR 12V n'est pas stable lorsqu'elle est posée “debout” avec la batterie standard 2Ah. Ce socle sur mesure permet de stabiliser la visseuse. En bonus, six emplacements pour embouts de vissage palient un manque…
Wydruk około 1,74 €–2,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Belt clip Bosch GTB 12V printing only with support possible
Wydruk około 1,89 €–2,31 € nettoWstępna wycena jednego wariantu
This is a bin designed specifically to hold the 7.2v Makita DF012D power screwdriver for Zach Freedman's Gridfinity system. It may also fit the impact version (TD022D), but I don't have one available to verify. If you are unfamiliar with…
Wydruk około 13,82 €–16,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This voltage converter has no mount holes so I had to quickly put together this to mount on my robot. As printed it is snug and can hold the buck in motion. Best printed with supports at those overhangs. No scale needed to fit.
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
* Perpendicular to the Pegboard for easy access and reduced space usage * Clamp Bracket design to prevent it from falling * Strengthened Load-bearing capacity Please glue the parts. *"kitbox holder.3mf" is the holder for the toolbox*…
Wydruk około 6,39 €–7,81 € nettoWstępna wycena jednego wariantu
Description This model is a circle router to be used with a Bosh GKF 12V-8. It uses a 12x12 mm extrusion for the arm. The minimum routing diameter is 240 mm and the maximum depends on the 12x12 mm extrusion length you use. This model is…
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tištěno z PETG 4 perimetry spodní výplň koncentrická
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of @Boogie created Heatbed cable cover: "A slightly simpler version of the heating bed cable cover with the possibility of tightening the screws for the contacts. For this cover you need a M3x12 screw to mount it." I just…
Wydruk około 1,23 €–1,51 € nettoWstępna wycena jednego wariantu
Introducing A compact blastgate designed for DN50 HT pipes. It integrates multiple features to optimize dust collection systems. The gate includes a dedicated mount for a 12V microswitch that can be triggered automatically when opening or…
Wydruk około 4,52 €–5,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Material 1pcs 6-channel Fan controller Akasa AK-FC-08BKV2 https://www.conrad.ch/de/p/akasa-ak-fc-08bkv2-pc-lueftersteuerung-13-32-cm-5-25-zoll-anzahl-kanaele-6-inkl-led-beleuchtung-791451.html 6pcs 3.5mm stereo jack panel connector TRU…
Wydruk około 15,37 €–18,78 € nettoWstępna wycena jednego wariantu
In case someone needs CAD data, send me message. I can share it STEP, PARASOLID, PRT, CATPART …
Holder for Bosch 12V battery I edit inside shape (-0.1mm) - some of you had to applied offset...
Hi Here you can find holders for a Bosch GSR 12V-15 and its charger for wall mounting. I've made a single bracket up to a triple bracket depending on how many you have. The chargers are simply inserted into the holder from the top, the…
Slim version remix of the original. Two versions - for the drill/driver and larger for the impact driver. Reduced overhangs. I printed mine upright in ABS, 20% infill, 3 walls, 0.2 layer height. My first model/remix. Used basic tools in…
A holder for 5 x 12V Bosch batteries. Easily attached to a wall using two screws. Upper layer can be printed using a different color for a nicer finish (see pictures)
I know there are a number of holders available for the DeWalt batteries but I decided to design/print my own after seeing complaints of “too tight” along with not seeing options for both the 12V and 20V battery sizes, not to mention the…
I'm organizing my Bosch 12V power tools on a sheet of plywood on the wall in my workshop. With these 3D printed mounts, I can easily and safely hang my Bosch tools when they are not in use. All the tools hang on their battery socket. It…
Bosch-12V_Battery-holder - No Support There might be a slight variation the the dimensions of the batteries. this model should fit 3A (My 2A batteries have a slightly looser fit)
Źródło oznaczyło ten model jako treść 18+.
It is a remix of one design found here but i can not find the link now. It is shorter and i added one version with angle in case of mounting under the shelf. (As I did) Print Settings Printer: Pinky Rafts: No Supports: No Resolution: 0,4…
Fits any standard 12V plug Friction fit, no rattling Easy to take in and out
This is a battery holder for Milwaukee 12V 2.0Ah batteries. I have developed it on an 2.0Ah battery. Special feature: This holder uses the original locking mechanism of the Milwaukee battery. Secure hold. Note: Does not fit for 4.0Ah…
Bosch 12V battery holder Simple holder for ther 12V Bosch professionel batterys. I was searching for something that protects the batterycontacts. i can't find something that fits my needs or works right out of the printer. So i have to do…
Car 12v plug cap No support Material: Pet-g or ASA (the temperature in the car can be higher in the summer)
Holder for Bosch Professional 12V GSR Drill FlexiClick Attachments (Drill chuck, L-piece, etc.) Also see my other Holder for the 12V Drill iteself. Printed with Prusament PETG (Prusa orange). No supports, I printed with 25% linear Infill…
DC UPS based on LX-2BUPS module (5V/9V/12V, with a USB Type-C power connector). This is useful for powering internet switch/router during a power outage. If you need 5V UPS with USB output, use this design instead. Aug 2024 update: I…
Holder for Bosch GSR 12V-35 (and other similar) Drills (most 12V Bosch GSRs should fit) Also see my other Holder for the different attachments (drill chuck, L-piece, etc) Printed in Prusament PETG (Prusa Orange) and holds up very well…
Simple wall mount for 10.8V / 12V Makita CXT batteries. Keeps batteries organized and safe. Category: Tool Holders & Boxes
The adapter for the 12V PARKSIDE Battery lets you click your battery in and use it in your projects! Step files and F3D files are included so that you can change the shape of the adapter to your needs. Electrodes made out of 0.5mm thick…
This is a battery attachment for Bosch 12V 2Ah and 3Ah batteries for their power tools. With this you have a stand for your lamp, drill or other power tools. You simply clip it in with some force and can remove it with a flat screwdriver.…
Druck am besten mit PETG. Die Akkus werden eingeclipt und halten daher auch hängend.
Ein Halter für den Akkuschrauber Bosch GSR 12V-15. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.
Support mural de batterie Parkside 12V. Battery holder Parkside 12V
Ein Halter für den Akkuschrauber Bosch GSR 12V-15 FC. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.
The enclosure consists of 2 parts: Top and Bottom. The XH-M609 board is placed first on the bottom case, to ensure centering, then the top part is seated over until there is no gap on the sides. The assembly is secured with 4 M3x12…
Stl - Daten des BOSCH GWS 12V-76 Toolholder aus Thingiverse Link: https://www.thingiverse.com/thing:3971430 Danke an das Original. Ohne Support gedruckt.
Remix from existing designs, i would like a hub generator to enable everyone to do it own. Hubs works with 1V, 2V, 3V, 4V, 5V, 6V geodesic dome Strut profile : rectangle or round use Dromerama calculator to get Strut sizes :…
Remix from original idea by OK1BT @yourmum_52499 TNX! 100W discharge test BOM 4x LiFePo4 10Ah [ 1 ] or [ 2 ] Operate with terminal ↑UP 3x short 8x M6 nuts 8x M6 cable eye 1x QC4.0 QC3.0 PD 5A 100W [ 1 ] or [ 2 ] IMPORTANT! Check if you…
Remix of https://www.thingiverse.com/thing:3274648 Parkside Battery adapter to fit new Parkside battery Tested and works on PAPK 12 A2 01/2020 production Also PAPK 12 A3
Some-thing to safely wall mount my spare Milwaukee M12 Charger using command strips in a more convenient location. And more options for mounting on various surfaces. Note: Using a minimum of 5 perimeters seems to get the best transition…
Screws to a shelf to hang 12v CXT Makita tools from the battery interface. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Filament: Tecor PLA+ Black Category: Tool Holders…
I couldn't find a wall mount for the batteries of the Bosch GSR 12V, so I made one. It can be fixed to the wall with two 40mm screws. The holder is slightly tilted for convenience. Update 2023-11-12: Added a non-branded version
Festool battery holder 12V - simplify your tool management Tired of searching for your power tool battery? Mount your battery on the wall for quick access, while organising them according to their charge status. Make your everyday work…
NOTE: as requested in comments (in Russian!) as of Sept. 21, 2025, this listing now includes a remix that covers up the ventilation hole while also provided a mount for the buck converter. For adding LED lighting to the non-pro version of…
Easy printable Hilti 22V battery Adapter with low supports. I used this for the current connection: HELLA 8KW 863 934-003; 2,8 x 0,8 https://www.amazon.de/gp/product/B008ZZ6Q9Q/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Cup to hold H11 55W lightbulb. Can be used for load testing of automotive or other 12V circuits. The cup prevents bulb burning your hand or car interior while testing. There are small holes in the cup wall to allow better visivility of…
Remix of Eduard3D's model. This version allows the cables to sit closer together. The hole diameter is the same, I just changed the spacing between them. This version is specifically made for the Corsair 12VHPWR cable, as it only features…
This compact holder can be screwed or glued under a shelf and holds a Bosch Blue 12V battery. It prints without supports in horizontal or vertical orientation.
This 3D-printed battery holder is designed for 21700 cells and supports configurations of 6S2P or 12S1P, making it ideal for lightweight R/C air applications. The design ensures durability and stability while keeping weight to a minimum,…
This battery holder is perfect for securely organizing your Bosch 12V batteries. Batteries are firmly held in place with a satisfying "click" (similar to inserting a battery into a Bosch tool), so you can mount the holder in any…
Modular router plate for the Bosch GKF-12V. Highly inspired and based on thing 3707881 by EpicFazer. I wanted a plate that I could use for different purposes, without having to disassemble the entire thing every time. It also has the…
I present a complete set of quick assembly of the Biqu H2V2s extruder. The kit includes the EBB42 adapter, a complete fan duct using the 5015 fan (modified design of @MarcoZ76_408) and a quick assembly tool (modified design of crazy…
Now you can arrange your Bosch batteries as you want it. This holder fits perfectly to the original batteries. Available in TWO versions: Mounting on profiles: The holder has a mounting hole for a M4 screw to fix it on an 20x40mm…
Just another vacuum adapter for the combination of GEX 12V/18V-125 with Boschˋs ClickˋnˋClean system or C35. Itˋs modified to fits stronger to ensure that the adapter can not release. Printed in PETG recommended. Itˋs a remix from…
adapter uses 2Ah parkside x12v team battery
Bosch-12V_Akku-tool-holder - No Support
Easy and nice robust DeWalt 12V battery holder mount on wall. With DeWalt logo on top side. Printing instructions: ■ Steel sheet ➔ at your own preference (textured PEI for PETG material) ■ Nozzle ➔ 0.4 ■ Material ➔ PETG/PLA ■ Infill ➔ at…
(English below) Um die Starlink mini im Wohnmobil über 12V betreiben zu können, habe ich mir ein kleines 12V Netzteil für den KFZ Zigarettenanzünder gebaut. Damit lässt sich das original 15m Starlink Kabel weiterhin verwenden und es kommt…
Adapter from Bosch Professional 12V Akku to XT60
This 4 piece inlay for Bosch/Sortimo L-Boxx Mini stores the Bosch GSR 12V-35 FC with its accessories and nine ¼'' Bits. The L-Boxx mini has to be modified a little to make it fit unfortunately. The back-left slot has to be removed with a…
A Adapter designed to conact to the main terminals of the Battery. I have designed this to be used with an RC charger to charg small Drone Batterys on the go. Pro: The Battery has under voltage Protaction, Balancing functions and lots of…
Hello, A Bosch GKF 12V-8 is a little bit challenging for milling a circular holes. None of the jigs for circles fits it. Therefore, I designed my own jig. The input requirement was a wide range of radius - usable for small tweeters and…
WARNING: The Makita CXT batteries do not appear to have built in battery protection, hence you will destroy them if you over discharge them. It is recommended that you fit a 3S BMS as part of your build. The terminals are designed to take…
This is a battery holder for Milwaukee 12V 2.0Ah batteries. (Long Version) I have developed it on an 2.0Ah battery. Special feature: This holder uses the original locking mechanism of the Milwaukee battery. Secure hold. Note: Does not fit…
Battery adapter for Bosch cordless screwdriver 12 volts to Makita battery 14.4 volts.
Tool holders for Parkside X12V series. I did not find any proper wall mounts fot tools so made them for those tools that I currently have. I included a shape that fits inside X12V tools in place where original battery is( in Fusion 360…
Cover for the Tobsun 12V or 24V to 5V converter found in the Voron 0 BOM. Is also usable for powering a Raspberry Pi on most 3D printers.
This is a drop-in replacement back plate for the Bosch 12V charger (model GAL12V-20) that allows you to mount the charger to a wall. The mounting slots allow the charger to be mounted either with the text right-side up or upside down. A…
12V Pb power bank, ideal to drive 12V COB LED light strips, i.e. in a gun safe internal installation, where no other power source may be available and the safety is valued. Pb battery is much more safer than modern LiIon/LiPo batteries –…
Soporte para pared, baterías parkside de lidl, 12v.
K1 MAX drag chain fix try. Works very well on my printer, no additional parts required. You can print it fr
Just remove the two Phillips-screws put the bracket in and screw them down again.
This is a battery holder for Bosch Professional 12V 2.0Ah batteries. I have developed it on an 2.0Ah Professional battery. Special feature: This holder uses the original locking mechanism of the Bosch battery. Secure hold. Note: Does not…
[ENG] Compact Battery Holder 12V for Makita Cordless Tools (Remix) Description: Introducing a streamlined remix of the original 12V battery holder for Makita cordless tools. This compact version offers optimized print time and filament…
This is an insulating terminal adapter for a 151x65x93mm SLA battery. For my hobby applications I wanted to have a safe connection to avoid unintentional shortcuts and additionally have an integrated fuse directly at the battery terminal.…
Created a little and simple screwable mounting bracket for Parkside X12V charger. Print with 3-4 perimeters, 0.2mm layer. Designed for PLGK 12 A3 but maybe it will fit other chargers It is best to print it standing up as it is in the file
This is a battery base for the newer Bosch 12v battery modules, which also fits the Dremel 6250+ battery units. I designed this to replace a battery base that I damaged when opening the battery. It can serve as a basis for modern battery…
Just a little mount I made for my beloved Bosch GSR 12V-15 drill. Fits nicely, it's not too thight so you can easily store your drill in it. ------------------------------------------------------------------------------------ V1.1 Update…
TOBSUN DC-DC 24V/12V to 5V converter din rail mount Based on the VoronUsers 2 channel relay mount and I also added the unmodified Voron 2 DIN rail clip for your convenience. This fits the DC-DC converters which are e.g. part of the Voron…
This is a osVAC M32 adapter for the Bosch GEX 12V-125 orbital sander. With the F32 counterpart for the original dust collector. There are 3 models: Bosch 12V M32.stl: the standard model. Bosch 12V M32 Tight.stl: a tighter version. For…
Holder box for A23 12V battery, compatible with battery connectors 8.8 mm wide like the ones on the photos. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: 3D Line PLA…
Holds Bosch, Milwaukee and Parkside 12V batteries. Takes two 4x35mm screws, assuming 30mm depth wall plugs. Battery clips in for retention. It is possible to pull the battery out without pressing the release since the underside of the…
Cover cap for car 12V socket or car cigarette lighter. 2019 12 04 Added flex version of body. Suitable filament for body is Flexfill TPU 92A "Traffic Black" (Fillamentum) Print instructions Printer Brand: Prusa Printer: i3 MK2.5…
You need 6 Screws M3x8 , Servo-Tester-Board, Brushless Outrunner 2838 (Front Mounted!), Small ESC, Mini Power-Switch 9 x 13 mm. Maybe you have to adapt the hole in the Fan for the Motorshaft.
Just a nice Gridfinity holder for the BOSCH 12V battery
A holder for the 12V Bosch professional cordless drill. It can be screwed or glued under a shelf. Print in vertical position for strength, when printed with the flat side down it tends to break. This holder was inspired by the more…
This model is a replacement cover my coworker designed for the Milwaukee M12 battery. It works for the small stubby type shown in the picture. The cover clips easily onto the battery geometry and holds tight. It also has a spot for the…
Makita CXT 12V (10.8V) 4 place battery holder. Includes files for 4, 3, 2 and 1 battery holders. 4 place holder is 253mm x 17mm overall. No supports needed. Print on edge as pictured. Edit: Added V2 40mm holes and labelled. Tool holder…
I printed in PLA with a 0.6mm nozzle. 5% gyroid infill and 2 perimeters are absolutely fine, just make sure your bed is properly cleaned and leveled, add mouse ears in prusaslicer in case of warping issues.
First, the original I modified is a very beautiful structure. Please check it out. I've bought battery backup bulbs before and when the power went out, they were not very bright. I made this for any power outage and with several batteries…
