P
Printablesh0rsty
Bike Beer Clip for 330 ml Cans can claw
This model is used to hold a 330 ml can on bicycle bottle cages.
Wydruk około 2,73 €–3,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 1515
- Polubienia
- 127
- Ocena
- 4,92
Wyniki wyszukiwania: 330
531 modeli
P
PrintablesKC Wilkinson
ACME thread adapter for a Solo 330 Aerosol Smoke Dispenser.
ACME thread adapter for a Solo 330 Aerosol Smoke Dispenser. Had some very hard to reach smokes that the Solo pole would not get to. Made a ACME Female thread adapter to fit on a various number of painters poles. Now the sky is not the…
Wydruk około 3,84 €–4,69 € nettoWstępna wycena jednego wariantu
- Pobrania
- 84
- Polubienia
- 4
- Ocena
- 0
P
Printablesromcoromcoromco
Blade 330s battery holder
Blade 330s battery holder for SPMX22003S30 battery.
Wydruk około 0,75 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 50
- Polubienia
- 4
- Ocena
- 0
P
Printablesmaniac rc
Fluval Siena 330 feeding flap
feeding flap for Fluval siena 330 fish tank. No special mount needed. For assembly, use superglue
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBeo666
Monster Energy Dosendeckel 330ml / 500ml Drink
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
- Pobrania
- 6928
- Polubienia
- 1150
- Ocena
- 4,79
P
PrintablesTim
Lenovo ThinkCentre Tiny 10" Rack Mount - now with optional Keystone Sockets (M720q, M920q, P330, etc.)
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
- Pobrania
- 6031
- Polubienia
- 467
- Ocena
- 4,97
P
PrintablesSimin_03
CAN LID 500/330/250 ml STRONG BASIC
CAN LID – BASIC SERIES 🥤 A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆 One-finger…
- Pobrania
- 5204
- Polubienia
- 1154
- Ocena
- 4,93
P
PrintablesTom Vít
Realistic tyres/wheels for LEGO 10330 McLaren Senna Formula 1 car
The brand new McLaren MP4/4, piloted by the famous Ayrton Senna, is very good except for one crucial detail: the ratio of front to rear tyres does not match reality at all and can distract a bit. Yet all you have to do is print the tyres…
- Pobrania
- 3423
- Polubienia
- 277
- Ocena
- 4,94
P
PrintablesSimin_03
CAN LID CLICK 500/330/250 ml STRONG BASIC
CAN LID CLICK – BASIC SERIES 🥤 A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆…
- Pobrania
- 2518
- Polubienia
- 601
- Ocena
- 4,78
P
PrintablesBeo666
Monster Energy Dosendeckel 330ml / 500ml Drink 2.3
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
- Pobrania
- 2085
- Polubienia
- 488
- Ocena
- 5
P
Printablesmilspecmoehring
Stackable Soda Can Crate for 500 ml & 330 ml cans
yet another stackable crate for 500 ml cans. Supports needed. A version for 250 ml Red Bull Cans is available aswell the logo was made using this model
- Pobrania
- 1288
- Polubienia
- 449
- Ocena
- 5
P
PrintablesBeo666
Monster Energy Dosendeckel 330ml / 500ml Drink v2
ACHTUNG: HIER IST DIE NEUE v2.3 VERSION: LINK Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke…
- Pobrania
- 1167
- Polubienia
- 178
- Ocena
- 4,5
P
PrintablesDickens
Lego 10330 McLaren & Senna wall mount
Please add your makes when you are done This is a PLA printed 3D part designed by myself in Fusion 360. The wall mount is multi coloured to help it blend in better with the wall and the wheels. Only 1 fixing is needed into the wall. I…
- Pobrania
- 1096
- Polubienia
- 85
- Ocena
- 5
P
Printablesyu-supersonic
Can dispenser (330ml tall)
Can dispenser designed for tall 330ml cans (diameter 58mm, length 146mm). Other dispensers I tried didn't hold cans well enough while traveling downwards. Dispenser has been designed to fit 350mm depth shelves (tested on Bosch fridge).…
- Pobrania
- 1064
- Polubienia
- 589
- Ocena
- 0
P
Printablesmhparsons
Beverage Can Dispenser-330ml
Update: Widened all the models 2 mm to better accommodate can size variations. (Thanks to @Yoyo for his input!) ------------------------------------------------------------------------------------------------------------ Nested and keyed…
- Pobrania
- 956
- Polubienia
- 395
- Ocena
- 4,5
P
PrintablesNeoRame
Honeycomb Euro Can dispenser (330ml and 500ml)
The Original has the issue that you had to sand the connections to fit. Also, the connections was to thin so that the constructions start to collapse if the rack was to full. I changed the tolerances for a better fit, and modified the…
- Pobrania
- 943
- Polubienia
- 142
- Ocena
- 4,5
P
PrintablesKieran E
Bike Beer Clip for 12oz, 355ml, and 330ml Cans
Inspired by this design . I didn't like the latching mechanism and it was very hard to print due to some poorly designed internal overhangs, so I decided to redesign it. My design leans more into the spring force of the clip to hold the…
- Pobrania
- 919
- Polubienia
- 106
- Ocena
- 4,7
P
PrintablesEngeneerNick
Two-in-One Can Holder for 500ml and 330ml cans
Like this model? check out the smaller version: https://www.printables.com/model/1366342-two-in-one-can-holder-for-250ml-and-150ml-cans 🛠 How Does It Work? This 3D-printed can holder features a clever sliding mechanism with a built-in…
- Pobrania
- 918
- Polubienia
- 227
- Ocena
- 5
P
PrintablesRoad
Euro Can Dispenser for tall 330 ml cans
After realizing the scarcity of dispensers fitting the new tall 330ml can measurements, I was searching for a solution. Pedro's model is fantastic, but only suitable for the ‘fat’ 330ml cans. This is why I rescaled this and uploaded it…
- Pobrania
- 894
- Polubienia
- 174
- Ocena
- 4,33
P
PrintablesZaxMan3D
Soda Can Dispenser Deluxe (EU 330ml 500ml)
🥤 Soda Can Dispenser Deluxe – Sleek, Stylish, and Functional! Upgrade your beverage organization with the Soda Can Dispenser Deluxe! Designed in an eye-catching Voronoi-style , this dispenser holds a six-pack of 330ml or 500ml cans…
- Pobrania
- 771
- Polubienia
- 307
- Ocena
- 5
P
PrintablesDockGuy
![eGPU Thunderbolt chassis for EXP GDC TH3P4 + ATX PSU [165x165x330mm - 9 liters]](https://media.printables.com/media/prints/429812/images/3562411_ec2f4b23-3b18-464a-bc88-986318650ad4/screenshot-2023-03-21-182821.jpg)
eGPU Thunderbolt chassis for EXP GDC TH3P4 + ATX PSU [165x165x330mm - 9 liters]
Intro: The motivation for this design was to build an eGPU with a $250 budget with used parts with a 10 liter maximum volume. At 165mm x 165mm x 330mm, it comes in at 8.98 liters. Full assembly guide here:…
- Pobrania
- 733
- Polubienia
- 58
- Ocena
- 5
P
PrintablesRANPETEL
A320 / A330 131VU panel
A320/A330 131VU panel NO PCB NEEDED! This panel do not need any PCB as it has the unique “Button Base” panel for easily insert and attach buttons, switches, rotary, potentiometers and encoders. Important Note: While this panel can…
- Pobrania
- 633
- Polubienia
- 35
- Ocena
- 0
P
PrintablesReProps
Narumi Exclusive Weapon GS-3305(Kaiju No 8)
about 5.5 ft. reinforced with a combination of .5 and .25 in dowels. have fun. Category: Props
- Pobrania
- 631
- Polubienia
- 47
- Ocena
- 0
P
PrintablesPhill Bond
Yeti 330ml Can Spacer
If you love your Yeti can-holder like me and you also like to alternate your go-to beverage from those in the standard 375ml cans to those in the shorter 330ml cans, then this simple print is much more cost effective than buying a second…
- Pobrania
- 628
- Polubienia
- 21
- Ocena
- 5
P
PrintablesMicroswiss Support
![M3301 CR-10 / Ender-3 [Micro Swiss NG REVO Extruder] - Fan Shroud and Probe Brackets](https://media.printables.com/media/prints/752941/images/5875415_aef71d45-79a9-45ac-914c-33f9cabdee76_1b470434-8aec-41fc-a3f6-a048b3c0addb/ngrevoender3001_2400x2400.webp)
M3301 CR-10 / Ender-3 [Micro Swiss NG REVO Extruder] - Fan Shroud and Probe Brackets
Compatible with: Extruder : SKU M3301 - Micro Swiss NG™ REVO Direct Drive Extruder for Creality CR-10 / Ender 3 Printers Hotend: E3D Revo Hotend Fan: 4010 Part Cooling Fan: 4010 Blower Probe: Various Options 3D Printer Model: CR-10 CR-10s…
- Pobrania
- 626
- Polubienia
- 25
- Ocena
- 4,67
P
PrintablesJawaswag
330ml can dispenser
Print the dowels at 40% infill to give them some strength. I used expanding glue, e.g Gorilla Waterproof Glue, in the dowel holes so the assembly Is stiffer. Use cable ties or clamps to keep the parts in place while the glue expands and…
- Pobrania
- 620
- Polubienia
- 82
- Ocena
- 5
P
PrintablesRUMcajz
Can Holder Riser + Inserts (12oz + slim 330ml - Scalable)
Can Holder Insert / Riser I decided to make these simple inserts that can make using my canholders more enjoyable. 41mm Insert for smaller cans in a larger holder (12oz can in a 0.5L holder) 330ml Insert for slim (coke) cans in a larger…
- Pobrania
- 570
- Polubienia
- 52
- Ocena
- 4,75
P
PrintablesSimin_03
CAN LID 500/330/250 ml STRONG ALIEN
A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆 Two-finger operation – open & close…
- Pobrania
- 565
- Polubienia
- 217
- Ocena
- 5
P
PrintablesLionel SAVOCA
Airbus A330-743L Beluga XL - Scale 1:100
Passionate about aviation and aircraft engineering, I couldn’t imagine not modeling the Airbus Beluga XL (A330-743L) — one of the most iconic cargo planes in the world, instantly recognizable with its unique “smiling” design. The model is…
- Pobrania
- 563
- Polubienia
- 36
- Ocena
- 5
P
Printableswrmueller
Bosch Mini Remote BRC3300 Reparaturschelle
Hallo, ich habe hier für eine eBike Bosch Mini Remote BRC3300 ein Reparaturschelle konstruiert. Das Original ist leider gebrochen, ein Ersatzteil gibt es vom Hersteller nicht. Gedruckt in PC ist es stabiler als das Original. Auf der…
- Pobrania
- 514
- Polubienia
- 14
- Ocena
- 5
P
PrintablesRosti
Can Dispenser UK/EU 10x 330/440ml Drink / Beer
June26 re-design note. @s0ren reported that in his print of the 8 can holder, he had problems removing cans (removal aperture not high enough). He had printed in PLA, I had printed in PETG, perhaps there was a difference in shrinkage…
- Pobrania
- 512
- Polubienia
- 409
- Ocena
- 5
P
PrintablesGolden Bear Models
Airbus 330-800 NEO
1:200 Desk Model of the Airbus 330-800 NEO. The .3MF file contains the parts for the print. Wings were printed with supports.
- Pobrania
- 494
- Polubienia
- 37
- Ocena
- 4
P
PrintablesMarcin Miszewski
EBB36 VZBOT VZ235 VZ330 MOUNT - NEW BEACON DUCT
HI, I would like to share my adapter to mount BTT EBB36 on VZ Alu Printheads. It is designed for: BTT EBB36 V1.2 + VZHextrudort LOW PLUS + MOONS Stepper and Alu printhead. I did not test it with other motors like LDO (height may vary).…
- Pobrania
- 456
- Polubienia
- 58
- Ocena
- 5
P
Printableslostdutchmann
Realistic tyres/wheels for LEGO 10330 McLaren Senna Formula 1 car dual color flat letter
Made the goodyear eagle text flat with the tyres so it looks more like it's printed on. v1: Was my first version and gives the letters a faded look. The backtyre is not fully optimized and prints extra white in de tyre it self. v2 does…
- Pobrania
- 456
- Polubienia
- 39
- Ocena
- 0
P
PrintablesMicroswiss Support
![M3302 Ender 5/Pro/Plus [Micro Swiss NG REVO Extruder] - Fan Shroud and Brackets](https://media.printables.com/media/prints/735325/images/5748609_a9d64cd5-5eda-4399-a8be-543f085c15c6_d84847a4-8b28-4e4c-99e6-bdd8af654401/ngrevoender5001_2400x2400.webp)
M3302 Ender 5/Pro/Plus [Micro Swiss NG REVO Extruder] - Fan Shroud and Brackets
Shroud and probe brackets for the NG Revo Extruder for the Ender 5, Ender 5 Pro and Ender 5 Plus.
- Pobrania
- 452
- Polubienia
- 28
- Ocena
- 0
P
PrintablesBeo666
Monster Energy Dosenverschluss 330ml / 500ml Drink
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
- Pobrania
- 447
- Polubienia
- 57
- Ocena
- 5
P
PrintablesThibault Huguet
Lego 10330 - McLaren MP4/4 - Realistic Tyre & Rims (separated)
The Lego model 10330 - McLaren MP4/4 Senna - comes with tyres that are much narrower than the real cars. This model is based on @tomvit work, and provides separate parts for tyres and rims to be printed individually. For best effect, I…
- Pobrania
- 431
- Polubienia
- 43
- Ocena
- 0
P
PrintablesDickens
LEGO set 10330 McLaren Senna Formula 1 car tyres/wheel with or without logo's
LEGO set 10330 McLaren Senna Formula 1 car tyre/wheel with or without logo's. My version has the 6 holes in the hub like the original. Lay the wheel on it's back. You will need supports. Back wheel to a size that is more like the original…
- Pobrania
- 421
- Polubienia
- 46
- Ocena
- 5
P
Printablesdave2007
grinch articulated https://makerworld.com/en/models/783309?from=search#profileId-720729
https://makerworld.com/en/models/783309?from=search#profileId-720729 please check the original creator for license
- Pobrania
- 406
- Polubienia
- 44
- Ocena
- 5
P
PrintablesSzarkadiusz
Legendary Vikings horn for drinks - optimized for 250/330/500 ml cans
If You are glad with my work You can buy me coffee: https://ko-fi.com/szarkadiusz Legendary Vikings horn for drinks - optimized for 250/330/500 ml cans Be true legend Old tales said that You need fo finish Your drink in one sip ! Be Brave…
- Pobrania
- 403
- Polubienia
- 232
- Ocena
- 5
P
PrintablesDer-3DMitsh
Dosen Deckel 330 und 500 ml
Dosen Deckel 250 ml gedruckt aus TPU 04 Düse in 0,2mm geeignet Insekten ab zu halten bedingt dicht wenn richtig angebracht läuft keine Flüssigkeit heraus. gedruckt mit Genius Pro 04er Düse bei 0,2mm mit geeetech TPU einfach und simpel…
- Pobrania
- 403
- Polubienia
- 25
- Ocena
- 5
P
PrintablesAldoale
CPAP Muffler for Vz-Bot 330
I tried to adapt the original born for the VZ-Bot 235 to the VZ-Bot 330 for those who have the stepper pin facing inward I added an Airbox with the lower left part recessed so as to adapt it directly without having to turn the engine, if…
- Pobrania
- 373
- Polubienia
- 65
- Ocena
- 0
P
PrintablesDave
Dewalt TOUGHSYSTEM 2.0, Drawers DWST08330-1
-tisknuto z PLA -Dewalt TOUGHSYSTEM 2.0, DWST08330-1
- Pobrania
- 370
- Polubienia
- 72
- Ocena
- 5
P
PrintablesRANPETEL
A320 / A330 ATC MSG panel
A320/A330 ATC MSG panel NO PCB NEEDED! This panel do not need any PCB as it has the unique “Button Base” panel for easily insert and attach buttons, switches, rotary, potentiometers and encoders. Can be connected to 131VU panel which can…
- Pobrania
- 357
- Polubienia
- 20
- Ocena
- 0
P
PrintablesHans Schulz
Fujitsu Primergy TX1330 M1 2.5" HDD Caddy
Hotswap 2.5" HDD/SSD caddy for old Fujitsu Primergy servers. Fits as a replacement for A3C40058356, see compatibility section for servers. Fits drives up to 12.5mm, however airflow might be an issue. You can use the metal piece from blank…
- Pobrania
- 354
- Polubienia
- 15
- Ocena
- 5
P
PrintablesINRG
Fluke 330-Series Clamp Meter Replacement Knob
The final print might require a bit of trimming to fit. But works just fine. Compatible with Fluke: 333 334 335 336 337
- Pobrania
- 346
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMartin_au
X5SA Pro 330 Z-axis support (Slide in place).
If you look along the Z-axis supports (the ones with the bearings), you'll probably notice that they curve due to the weight of the bed. This was a concern for me as I don't want the bed flexing as more plastic gets added to a print. Many…
- Pobrania
- 345
- Polubienia
- 33
- Ocena
- 5
P
Printablessouthbaygsr
Lexus RX330 Key Fob
Car key/fob combinations are notorious for becoming brittle and failing. I scanned the fob internals and designed the case to use M3 SHCS and nuts. 0.2mm, PLA, Sovol SV01
- Pobrania
- 336
- Polubienia
- 26
- Ocena
- 5
P
Printableschking
Bosch BC330 Battery Charger Mount
A wall mount for the Bosch BC330 Battery Charger ( https://www.amazon.com/Bosch-BC330-12-volt-Lithium-Ion-Battery/dp/B00EPE7QU4 ). I've also designed a Slat Wall plate for this mount:…
- Pobrania
- 318
- Polubienia
- 41
- Ocena
- 5
P
PrintablesElderMillennial
Rak WisMesh 1 Watt Booster 3401 + 13302 Simple Case
I recently was delivered my 1 watt boosters but couldn't find a good simple case for them, I run my antenna wire outside and keep my radio inside so I just needed something to securely mount the board, keep the antenna from spinning and…
- Pobrania
- 316
- Polubienia
- 28
- Ocena
- 5
P
PrintablesDaishuku
Custom Wheels for Lego Icon 10330 McLaren MP4/4 (Ver.2 uploaded)
Everyone wants a custom wheels for this MP4/4 Lego set are same reason… However, I can't found a after market parts, so I carry on my first try. Project characteristic Blender based project. Referenced to a lot of MP4/4 public source. My…
- Pobrania
- 311
- Polubienia
- 25
- Ocena
- 0
P
Printablesdanny243
Scharfenberg coupling type 330 / Scharfenberg-Kupplung Typ 330
Scharfenberg magnetic coupling for model trams and light railways in scale 1:87 (H0) The magnetic coupling can be used for almost all light rail models and many GDR tram models that use Scharfenberg couplings. The printing should be done…
- Pobrania
- 309
- Polubienia
- 12
- Ocena
- 0
P
PrintablesEbthing
Dual Lenovo M700 Rack mount kit (also fits the M93p and P330) Tiny PC
Remix of MyStoopidStuff's Under Desk Slide Out Mount For A Lenovo M700 (also fits the M93p and P330) Tiny PC Really liked the design and fit but needed a rack mountable solutions, step file included incase anyone wants to make their own…
- Pobrania
- 309
- Polubienia
- 45
- Ocena
- 4,5
P
PrintablesVoxInaudita
Food dehydrator tray extension for 275 mm (10.8 in) or 330 mm (13 in) dehydrators
Tray extension for non-branded food dehydrators which are 275 mm (10.8 in) or 330 mm (13 in) in diameter, so that they can be used to dry filament. Please note that I have not tested the sizing of any of the 330 mm parts as I do not own a…
- Pobrania
- 299
- Polubienia
- 52
- Ocena
- 4,6
P
PrintablesBruce
Dosen Deckel für 330ml
Filament: - JAYO - weiß - PLA+ - eSUN – hellbraun – PLA+ Objektgröße: ca. L:B:H in cm Drucker: Prusa MK3S, Bambu Carbon X1 Düse: 0,4 Schichthöhe: 0,2 Infill: 15% Stützen: keine Druckzeit: siehe 3mf/gcode Ziemlich passgenauer Deckel. Zum…
- Pobrania
- 288
- Polubienia
- 9
- Ocena
- 0
P
PrintablesAtomicVirology
Logitech K330 keyboard feet
This is a remix of the Logitech K330 keyboard feet. Original was a bit loose - this model is wider to give a solid, snug fit (you need to squeeze feet a bit to install them, like the injection moulded originals). Photos show 0.2 mm PLA -…
- Pobrania
- 287
- Polubienia
- 22
- Ocena
- 4,73
P
Printablesantirez
JVC HR-3300 first history VCR
The HR-3300 was the first VCR commercially available. This is a 1:12 miniature I created looking carefully at the pictures on the internet. The test print was performed with an MK4 and a 0.25 nozzle, but this would require a resin printer…
- Pobrania
- 285
- Polubienia
- 138
- Ocena
- 5
P
PrintablesShadowChaser
Lenovo P330 Tiny RX6400 PCIe Bracket
This is a highly perforated PCIe bracket for an HP RX6400 that allows it to be used in a Lenovo P330 Tiny USFF system to replace the original Nvidia Quadro GPU. Theoretically any reference low profile RX6400 will also be compatible with…
- Pobrania
- 285
- Polubienia
- 12
- Ocena
- 0
P
PrintablesMartin_au
Belt guard for X5SA 330x330
Belt guard for X5SA 330x330
- Pobrania
- 266
- Polubienia
- 34
- Ocena
- 5
P
PrintablesEm Jay
Can Holder 330ml, 250ml, 330ml (slim), 500ml
Various sizes. Easy to print. Preferably in PETG. Have fun with it.
- Pobrania
- 258
- Polubienia
- 89
- Ocena
- 5
P
PrintablesJavar
cap for the can 330ml and 500ml (d-54mm)
material PLA can 200ml: https://www.printables.com/cs/model/586086-cap-for-the-can-200ml-d-515mm
- Pobrania
- 256
- Polubienia
- 43
- Ocena
- 5
P
PrintablesJosh Laurie
Viper 3305v/7345v Alarm Remote Battery Cover
Over the years I would end up dropping the remote a few times, in doing so the battery cover ended up breaking so for a long time I was using tape to hold the battery in, I then got an AnyCubic Photo Mono. From using tape to hold the…
- Pobrania
- 256
- Polubienia
- 11
- Ocena
- 5
P
PrintablesRayed Farhad
Lenovo p330 1.7 liter PC with RTX 3050 6GB LP
I got this Lenovo P330 Tiny back in March of 2024. I mostly used this as a NAS. Its stock configuration included a 2 GB external GPU, which worked fine for basic tasks. I also played some games on it like FH4, and FIFA 18. While exploring…
- Pobrania
- 255
- Polubienia
- 25
- Ocena
- 0
P
PrintablesF2-Beamer
Metabo DH 330 Dust Adapter to 50mm
Adapter for the Metabo DH 330 Dust Collector to 50 mm
- Pobrania
- 243
- Polubienia
- 19
- Ocena
- 5
P
PrintableskevCarrico
C-330 3M Post-It Pop-up Note Dispenser
this is my favorite post-it™ dispenser, and they stopped making them years ago, and i can't find any on ebay, so i jumped into fusion. printing requires no supports, fill the cavities with weights of your choice, i designed it to take…
- Pobrania
- 241
- Polubienia
- 44
- Ocena
- 5
P
PrintablesJ6240
Sun Visor for Nikon D3100/D3300 Camera
Printed in Prusament PLA Galaxy Black - 0.10mm Detail - Support on the bed only - 15% infill - 5h42 printing.
- Pobrania
- 239
- Polubienia
- 35
- Ocena
- 5
P
PrintablesTomas Horacek
A330 landing gear mechanical model
Print with 0.2 mm layer height Hardware parts: M3 heatset inserts M3 screws 10mm diameter tube a compression spring (100mm long) a tension spring (20 mm long) LM8UU linear bearing LM8UU linear rod (60mm)
- Pobrania
- 231
- Polubienia
- 11
- Ocena
- 0
P
Printablesthall72
Lego Compatible (3307.dat) Arch 1 x 6 x 2 with Thick Top and Reinforced Underside
This model is compatible with the lego system.
- Pobrania
- 227
- Polubienia
- 24
- Ocena
- 5
P
PrintablesVasilii
Double Wall "Scientifically Tested" 330 & 500 ml Can Koozie
This is a koozie cover for 330 ml & 500 ml aluminum drink cans. There are 3 versions for common can types: “Standard 330 ml” (66 mm diameter, 146 mm height) “Sleek 330 ml” (58 mm diameter, 115 mm height) “Standard 500 ml” (66 mm diameter,…
- Pobrania
- 220
- Polubienia
- 43
- Ocena
- 5
P
PrintablesCaveman
European 330mm can handle
This is a remix from stusona's can handle. This handle fits the european 330ml soda cans. Enjoy Print instructions Category: Food & Drink
- Pobrania
- 220
- Polubienia
- 10
- Ocena
- 5
P
PrintablesRD Kidd
Radio Stand for Tecsun PL-330
Very grateful to MTMscad for his original, I modified it to perfectly fit the Tecsun PL-330 receiver and added a cutaway (circled in red) to allow the volume knob to turn freely.
- Pobrania
- 217
- Polubienia
- 12
- Ocena
- 5
P
Printablesi5cemi
Ersatz Rad 7,5 Zoll Makita Rasenmäher (hinten) - #DA00000330
I designed an almost identical spare wheel for the rear of my Makita cordless lawn mower - more stable than the original because the soft struts are no longer needed! The original hubcap can still be used. A further improvement in driving…
- Pobrania
- 212
- Polubienia
- 18
- Ocena
- 5
P
PrintablesAjay Kamath
Airbus A320/A330/A350/A380 Landing Gear Lever Knob
Preferred printing at 0.1mm steps using any colour ABS or PLA. Print at 100% infill given its a relatively small component and the strength that a 100% infill provides, is required. The knob attaches via a 3.4mm hole that needs to be…
- Pobrania
- 210
- Polubienia
- 10
- Ocena
- 0
P
Printablesjose vega
Bracket for Lenovo ThinkCentre M920Q M920 M720Q P330
Bracket for Lenovo ThinkCentre M920Q M920 M720Q P330 Prueba de temperatura: Empieza con un valor bajo, como 220°C, y haz pruebas para encontrar el punto óptimo para tu equipo. La temperatura ideal del filamento PETG suele estar entre…
- Pobrania
- 207
- Polubienia
- 14
- Ocena
- 0
P
PrintablesBGDglider
Can holder for 330 ml cans with rotating protection lid – easy print
Can holder with rotating protection lid – easy print A minimalist can holder for standard 330 ml cans. The can is inserted from the top and clicks into place at the bottom; removal works in reverse. The holder grips the can using its…
- Pobrania
- 204
- Polubienia
- 45
- Ocena
- 5
P
PrintablesSir Thommes
Reduzierung 100mm Schlauch auf Metabo DH330
Eine Reduzierung von 100mm SSchlauch auf den Anschluss der Absaugung für eine Metabo DH330. Der Schlauch wird an diese Reduzierung angeschlossen. Dann kann der Schlauch mit der Reduzierung an den Dickenhobel Metabo DH330 aufgesteckt…
- Pobrania
- 203
- Polubienia
- 9
- Ocena
- 5
P
PrintablesPoty
Fujitsu RX1330 HDD Caddy a3c40152045 2.5" & 3.5"
Caddy designt for the Fujitsu Server RX1330 M1. (Maybe it can also be used on newer generations) The caddy is designt for transparent filaments, you can see the HDD status LED on the front. INFO: 2.5" caddy needs support! ...the 3.5"…
- Pobrania
- 203
- Polubienia
- 9
- Ocena
- 5
P
PrintablesDror Cohen
Beverage Can Dispenser EU 330ml (11.2oz)
Nested and keyed Beverage Can Dispenser for standard Europeans sleek/slim soda cans (330 ml / 11.2oz). Holds seven (7) cans. Model is split into two halves so it can be printed on a standard size printer (bed size ≥ 20cm). The two halves…
- Pobrania
- 203
- Polubienia
- 20
- Ocena
- 0
P
PrintablesLiquid_Squid86
SimbaSim Runsco 330mm Steering Wheel Button Box
A simple Touring Car/Rally style button box for the affordable Runsco 330mm Steering Wheel. The ideal low cost way of converting a real steering wheel into a Sim Racing accessory for your sim rig. The steering wheel specification consists…
- Pobrania
- 199
- Polubienia
- 35
- Ocena
- 5
P
PrintablesDickens
Prost version LEGO set 10330 McLaren Formula 1 car tyres/wheel with logo's
I have made a new version of my wheel for the LEGO set 10330. This one has the 11 for Alain Prost Original model - https://www.printables.com/model/825905-lego-set-10330-mclaren-senna-formula-1-car-tyreswh
- Pobrania
- 199
- Polubienia
- 29
- Ocena
- 0
P
PrintablesRadim
330ml can bike holder
A remix of a can clip for EU 330ml narrow cans.
- Pobrania
- 194
- Polubienia
- 24
- Ocena
- 0
P
Printablesthall72
Lego Compatible (33078.dat) Minifig Food Sausage
This model is compatible with the lego system.
- Pobrania
- 191
- Polubienia
- 30
- Ocena
- 5
P
PrintablesAndrea
Mamiya C330 lens cap
This is the cap for the 80mm Mamiya lens. I obtained a good result with PLA and 0.4mm nozzle (0.2mm layer). Enjoy!
- Pobrania
- 188
- Polubienia
- 13
- Ocena
- 0
P
Printablesthall72
Lego Compatible (33085.dat) Minifig Food Banana
This model is compatible with the lego system.
- Pobrania
- 188
- Polubienia
- 28
- Ocena
- 0
P
Printablesdave
VzBot 330 compact HEPA fan housing
The original is larger than it needs to be; this saves print time, material and back panel space.
- Pobrania
- 188
- Polubienia
- 30
- Ocena
- 5
P
PrintablesPrintyPaws
Airbus A330-300 airplane
Realistic Copy of the Airbus A330-300 Comes with: Colored Airplane (No splitting) Non Colored Airplane (No Splitting) Non Colored Airplane (With splitting) Layer height: 0.2 mm (0.12 mm for sharper surface detail) Infill: 10–15% (display…
- Pobrania
- 187
- Polubienia
- 12
- Ocena
- 0
P
Printablesthall72
Lego Compatible (33051.dat) Minifig Food Apple
This model is compatible with the lego system.
- Pobrania
- 186
- Polubienia
- 31
- Ocena
- 5
P
PrintablesNS
Lexus RX400h, RX400, RX330 Key adaptive holder (Fob, case) with logo
Very strong case for Lexus RX400h, RX400, RX330. Uses transparent glue to securely hold the case together. I prefer glue because screws and nuts are not attractive for this kind, small detail. Case will not flex and very strong when…
- Pobrania
- 185
- Polubienia
- 6
- Ocena
- 0
P
PrintablesKLAM3R0N
Rak 1w booster 3401 - 19007 13302 1w booster electrical enclosure mount + other electronics mounts
New added some new rev files that should allow for stacking of support electronics using standoffs between layers, and slimmer rak 3401 mount and a clip to hold the antenna on tight. 4/26/26 Mounting brackets for electrical enclosures…
- Pobrania
- 175
- Polubienia
- 20
- Ocena
- 4
P
PrintablesHandy Remstad
ADT UT3G eGPU Enclosure - 330mm GPU support
This is a remix (of a remix) of a eGPU enclosure. The previous models were made for smaller cards, this one in theory can fit a 330mm gpu. For more information about this enclsoure, check the original models. Please note this is the first…
- Pobrania
- 173
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSandfrog
Battery Pack for Recycled 13300 Akkus
Battery Pack for Recycled - 13300 from disposable E-Cigarettes. https://www.printables.com/de/model/1008015-battery-pack-for-recycled-801640-fake-akkus
- Pobrania
- 170
- Polubienia
- 22
- Ocena
- 5
P
Printablesmhparsons
V2 Beverage Can Dispenser- Six 330ml cans
Nested and keyed Beverage Can Dispenser for standard 330 ml. Euro cans. Holds six (6) cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required…
- Pobrania
- 167
- Polubienia
- 30
- Ocena
- 0
P
PrintablesStuart
Mamiya C330 Lens Cap
I printed this in TPU filament on an Ender 3. This fit on my Sekor 80mm lens. It could fit on other lenses with a diameter of 48mm.
- Pobrania
- 167
- Polubienia
- 10
- Ocena
- 0
P
PrintablesJim
cupholder adapter skoda octavia (250 or 330ml can)
I designed this adapter for soft drinks mainly for skoda octavia 3, but it could works with other cars. You can find two versions - for 250ml ("red bull" ) or for 330ml (soft drink) can
- Pobrania
- 165
- Polubienia
- 13
- Ocena
- 0
P
Printablesthall72
Lego Compatible (33057.dat) Minifig Food Turkey Leg
This model is compatible with the lego system.
- Pobrania
- 165
- Polubienia
- 30
- Ocena
- 5
P
Printablescolossatr0n
osVAC M32-R65 (65 mm Metabo Planer Adapter DH330)
This is an osVAC adapter for the Metabo Planer DH330. The larger end has an inner diameter of 65.5 mm. Printed with 50% infill, a brim, and the large end touching the bed. ********************* Dies ist ein osVAC-Adapter für den Metabo…
- Pobrania
- 162
- Polubienia
- 17
- Ocena
- 5
P
Printablescriss623
can dispenser for 330 ml
this is a simple remix changing the pattern on the sides and saving some material. I used supports on the baseplate only (snug type) 0.2 layer height, 10% infill, 3 walls, 4 bottom/top.
- Pobrania
- 160
- Polubienia
- 9
- Ocena
- 0