205 modeli
I designed the holders so that the measuring coils are neatly in one place in the control cabinet. A lower (2.stl) and an upper (1.stl) part are screwed together by 4 screws. 4 M3 nuts are pressed into the lower part. The holder holds…
This part is designed to replace and improve upon the TrackHat (V1) camera mount for the PS3 Eye Camera. It holds the camera reliably on top of a computer monitor. Supports are built-in; simply cut them off with snips or a utility knife.…
Print it and place it in your home. I placed in on the door frame. Have fun and please let me know if you have any suggestions to optimize it.
Every BMW owner knows this situation.. you're driving into some curve with about 100 km/h, your rear end goes left while you wanna go right and then it happens.. your Redbull that you put in the OEM's cupholders spills and you have a mess…
Mithilfe vom WagoTower, gehören quer verteilte Wago Klemmen im Werkzeugkoffer der Vergangenheit an. Mit diesem Spender können bis zu 11 Klemmen platzsparend aufgenommen werden. Durch den Hebel an der Oberseite können diese handlich mit…
For Radxa Zero 3W/E,use official Radxa 5519A heatsink with 1703 fan(SUNON UF3H3-700) connect to +3.3V/GND. Use 4xM2.5 heat set inserts and 4xM2.5*10 countersink screws to fasten the Cover and the Bottom. For Radxa Zero 2Pro,using official…
The Yakovlev Yak-3 (Russian: Яковлев Як-3) was a single-engine, single-seat World War II Soviet fighter. Robust and easy to maintain, it was much liked by both pilots and ground crew. One of the smallest and lightest combat fighters…
Simple case for the Radxa Zero3E. This is my first ever 3D design. I made 2 bases and 2 tops. The bases have two options: One with all usb and micro-HDMI connections and another with just the usb-c to power the thing for preset tasks. For…
Hello there! I was looking for a plug and play speaker replacement for my BMW E46 Compact (CAUTION! This model has bigger front door speakers than all other E46 - this adapter is only fitting for Compact!) and wanted better sound quality…
I created a version of the box lid that's two pieces instead of one. I also added the BTT Manta logo on the 1st piece and added a mounting point for a 4010 fan on the 2nd piece. I also removed the vent holes on the front of the case, the…
TC3EC 433MHz Moxon Antenna by TA3NT For detailed information, you can read our related blog post(TR). This antenna was designed by TA3NT under the name "TC3EC Moxon Antenna" to meet the antenna needs of 433MHz LoRa Meshtastic Nodes in…
Praetorian Guard armor the mandalorian s3e7 + helmet made by https://www.printables.com/@ccary17_761396
Update 6/9/2024: Changed to a single piece lid. Edited rearwards 4010 fan to be positioned better above the stepper drivers Pushed section that sits on the y axis extrusion further back to give more clearance for belt tensioners Pushed…
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words not printed yet Category: Mechanical Toys
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
(DE) Set von einfachen, stabilen 90° Winkeln. Bohrungen mit Kegelsenkungen. Versteifungsrippe in der Winkelecke. Vielfacher Verwendungszweck. Schnell und leicht zu drucken. (EN) Set of simple, sturdy 90° angles. Countersunk holes.…
A mounting plate for the BIGTREETECH Manta E3EZ V1.0 controlboard to attach it to a DIN rail. This mounting plate is designed around the DIN clip ( pcb_din_clip_x3.stl ) used in Voron electronics bays like in the Voron 2.4r2. To use this…
Repair gear for rear wiper motor part number 98700-3e000 987003E000 For cars Kia Sorento Hyundai SantaFe 88 teeth 53.6(7) mm diameter 10mm central shaft hole 7mm side shaft hole 5.45 angle
A simple case to protect and cool a Radxa Zero 3E with PoE HAT installed. Prints in two halves and slides together. The sliding action also press-fits and retains the PCB stack. I really like this little board, and intend to buy a few…
When upgrading the main controller board to a Bigtreetech Manta e3eZ (or other Manta board) with a CB1 computer a new touchscreen is also required, as the stock Ender 7 screen is not compatible. This screen surround is for the BTT HDMI5…
Wanted a side mounted case for the E3EZ with enough free space for cable management. Added the logo from here: https://www.printables.com/de/model/500230-bigtreetech-manta-logo Printed in PETG with 4 walls and 15% infill. For mcu fan a…
Update 2026-06-29: add opening for 25mm fan Update 2025-06-07: add v2: remove small connection between GPIO opening and Ethernet port Snap fit case for Radxa Zero 3E
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words Category: Mechanical Toys
This adapter plate mounts onto the factory standoffs using countersunk m3 screws (about 6mm in length). Then the Manta board can be mounted on the adapter plate standoffs using M3x4mm screws. Since the location of the USB and SD card…
Modified mount for the switchwire to fit the Manta E3EZ board
Крепления для AJAZZ AKP153E, AKP153, AKP153R на монитор.
A smooth and clean enclosure with hex ventilation holes for the Radxa Zero 3W and 3E: https://radxa.com/products/zeros/zero3w/ https://radxa.com/products/zeros/zero3e/ Prints in 3 parts (top middle and bottom) and 4 legs that slide into…
Je cherchais un moyen de placer le niveau laser à n'importe quelle hauteur. La qualité d'impression n'est pas terrible… mais la fonctionnalité est la… 3 dia différents pour s'adapter aux 3 diamètres de l'étais. Le fichier Step permettra à…
The M4A3E8 "Easy Eight" was one of the most advanced variants of the famous Sherman tank used by the United States during World War II. Equipped with improved suspension, wider tracks, and a high-velocity 76 mm gun, it offered better…
follow voron specs prints easily
Sikorsky CH-53E Super Stallion Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Just print snap the two parts and cut your pizza, you can use it as a fidget spinner after
See Differences. I recommend printing the 60mm redesign (and top) thats the one actual printed in pictures. I will add it mounted once my fan comes in. Sorry still need to tune out some stringing from a new nozzle I have on printer.
Printed of PETG, with supports. Spare vacuum bag holder Philips VC-H4213E-14
This model is compatible with the lego system.
2 DIN frame for Shelly 3EM. Prusament PETG, infil 15%
My NICE remote didn't came with a wall supoort so i made one :)
BigTreeTech has provided a Manta E3EZ enclosure for Ender 3 V2. However, this is like the original enclosure, in which the motherboard has to be mounted on the top of the enclosure, and we have to flip the printer upside down to access…
Simple diffuser for Olight i3E EOS flashlight. Print upside down for best results to not need any real support. Prints great in PLA or PETG and works especially well with a glow in the dark filament.
Changes: 11/18/2023 - added mantlet part and updated instructions 1/2/2023 - original upload Parts: The cannon support is fixes the cannon the in forward position The muzzle brake looks more accurate to real life and directly replaces the…
I recommend printing vertically with supports. This will provide the most strength.
Needed an Eletronics box for my E3EZ, so I made one loosely based on a similar box by Ishampadron, over on https://www.thingiverse.com/thing:6052240. The box has support for a single 4010 fan that sits above the first 3 stepper drivers,…
Battery cases for Panasonic Lumix DMW-BLG10E and DMW-BCM13E.
board mount for Manta E3EZ. Please note that none of the ports stick out of the existing openings, but who cares? It's running Klipper via wifi anyway.
This model is compatible with the lego system.
3er Gira 55 Rahmen mit einem Slot für einen Shelly Wall Switch. Ich habe hier einen Shelly WS4 verbaut.
Um Einbau Steckdosen auf dem Tisch zu nutzen habe ich dieses Modell aus den 2er Steckdosen ge-remixt.
3er Steckdose Aufputz, 3-way surface-mounted socket What u need: 3x Socket Ip44 https://de.aliexpress.com/item/1005006495376156.html?spm=a2g0o.order_list.order_list_main.185.48765c5f4daKOw&gatewayAdapt=glo2deu Screws countersunk screw M4…
Tricycles VW beetle (3e model of 5) Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA Note: Trim can without support!
Ein Remix meines Cases für einen 40er Lüfter. Würde hier den Noctua 40x20 empfehlen Alles andere ist gleich ;) Es werden kurze und normale Einschmelzmuttern M 3 benötigt sowie Nutsteine + Schrauben um es am Profil zu befestigen. 6xM3 Kurz…
Use 9V block battery to drive hasselblad el series. Need two M3 screw and a battery cable to work with. DO NOT USE CHEAP BATTERY. It takes high current to drive film back. Cheap batteries could work with the body itself but will not…
A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. It has zig-zag shapes all the way around it from top to bottom. Similar to other vase 893's with a different design twist. (Last of the 893's!) It is 110mm…
Original design by PhD Poturak Semir: www.Linktr.ee/3esign : No needs for supports, regular print settings should do.
Mounts 2 4010 fans above the stepper drivers HW required: 4010 fans x2 M3 30mm x3 M3 10mm x6 You can also use thicker fans if you need to, but regular 4010s work well enough for me. Also not necessary to mount them into all the holes, Im…
This is a model of the M4A3E8 it's the wider chassis with a 76mm cannon turret mounted on top. The tracks and wheels are printed separately for easier printing and easier multicolor. The turret has a bushing to make it rotate smoothly and…
Now compatible with the SKR3 (non EZ version) and Prusa MK3 frame. If you like my design and want to use it on different frame, just contact me and provide the hole spacing, I will make sure to update the design for you.…
Ich hab hier ein eigenes Case für das E3EZ Mainboard entworfen und enige Ideen aus dem Ender Design übernommen. Es werden kurze und normale Einschmelzmuttern M 3 benötigt sowie Nutsteine + Schrauben um es am Profil zu befestigen. 6xM3…
TC3EC 433MHz Moxon Antenna Splitted By TA3TRV For 220x220mm Printer Beds Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro **Rafts:** Doesn't Matter Supports: No **Resolution:** .16 Infill: %20 **Filament:** Porima ASA Beyaz…
Exactly the same size as original ones. Can work with orignal parts Print with MJF or SLS need a M2*12 GB119 PIN and a Ultra thin spacer. You can cut a toothstick and a piece of film instead. Category: Camera
Very simple really The battery-door of my old trusted Spektrum DX3R-radio had a little lid broken of and did not held tightly anymore. I found another STL for a DX3 … but that radio did not havge the same dimentions, as I noticed after…
Hier habe ich 3 gestapelte Rohre mit den folgenden Maßen: Innendurchmesser: 20mm, Länge: 60mm. Gedruckt aus ESUN-PLA+ da diesen Lebensmittelecht ist. PETG eignet sich auch. Gedruckt wurde es auf einem Anycubic Mega X. Die…
10 Einzelteile, zum Ausdruck und danach einzeln verkleben. einmal ein 50 cm Mass (Stern ist 50 cm hoch), bei einer Dicke von 10mmx10mm , zu drucken auf einem 22er Bett, bzw ein 100 cm benötigt ein min. 38 er Bett, dann 20mmx20mm. Man…
Extensively remixed version of the BTT SKR 1.4 Turbo Enclosure for CR-10S Standalone Mod" by mmoraes80, that I have created for use on my own design. I have deleted the aviation connectors, revised the cooling slots, added a 50mm fan and…
Easy wall mounting for your Worx WG163E Trimmer. Mounts to the wall with 3 screws. The mount holds the WG163E by the foldable handle. Printed in JAYO PETG with 3 walls and 15% infill. No supports are needed. Print as oriented in the file…
A tactical holder for your i3E light complete with spike and knuckle spikes.
Y 3er Rohradapter 5cm für Absaugung designt weil ich es nicht zu kaufen gefunden hab. Mit 0,6 Nozzel mit 0,2er Layer höhe mit PLA gedruckt.
Update 24 JUN: idk what was wrong with me when I uploaded this, but discription has been fixed for actual model. ADHD had me distracted lol My take on a SKR 3 EZ mounting plate for an Ender 5 Plus. ***PLEASE READ NOTES AT THE BOTTOM**…
Simple, no support hanger for headphones that slips over a "large" (17003es) command hook bracket piece. I couldn't get the strips to adhere well to PLA so I made this so I wouldn't have to worry about it. Just store the hook Category:…
Here's a model to mount your BTT Manta E3EZ V1.0 MCU to a DIN rail inside the Ender 3 NG v1.2! Designed to clear the 24V power supply, and leaves room for the USB and RJ45 port.
Verschiedene Blenedn für die Alu-Profile vom Vyper. 1 x Eine Bleande Clean 1x Eine Blende mit E3EZ + dem Schriftzug 1x Eine Blende mit dem MANTA Rochen!
Problemlos gleichzeitig, ohne Stützstruktur und mit 0,2mm Layerhöhe druckbar. Viel Spaß damit :)
This is a modified electronics books to be able to Mount the Manta E3 EZ control board.
A friend bought a wowgo 3e and within a few days the front pivot cup had all but disintegrated, and the rear wasn't far behind. I took a few measurements and whipped this up, printed it in TPU and it's been solid since (been a few months…
Anycubic Vyper / Bigtreetech E3EZ Case…
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
die ideale Futterschüssel wenn man 3 hungrige Tiger hat ;-)
Designed for the original Ender3. Will NOT work with a 40x40 Y rail. Designed to allow access from the front to the usb ports and memory cards. The re is an access port on the side for the board sd card. 40x40 Fan can be mounted on the…
Design This is a handy charger that you can mount on your wall or sit on your desk. It is built with both the stock and sport bands in mind. I used some peel-and-stick velcro to secure it on both the wall and the stand. Printing When I…
English (deepl translat) I needed a mount to attach the board to the printer. The holes are 15mm apart in the middle. I also used M3 nuts with a tolerance of 0.1mm. I have uploaded the step for editing. Deutsch Ich brauchte einen Mount um…
Mounts 3 4010 fans, 2 above the stepper drivers, 1 for the CB1 HW required: 4010 fans x3 M3 35mm x4 (for mounting the bracket) M3 10mm x6 (for mounting the fans) M3 Nuts x6 (for mounting the fans) I used Winsinn 40mm 24v 8500RPM Fans (…
Minimalistische Sitzfiguren – Modernes Deko 3er-Set
This is adapted from a R.Pi camera (https://www.thingiverse.com/thing:4037304) M12 mount. The main difference is the mount screw distance (~18mm) and the addition of a UNC 1/4-20 tripod mounting thread. There is no compatible new case for…
Don't forget to upload pictures of your makes I love seeing your prints of our creations :-)
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
this is a 1/35 scale M4A3E8 Sherman seat for loader and tank commander made by request for someone on facebook. marked as WIP until its been fitted to a Sherman and conformed to be accurate. Print Settings Printer: cr-10 Rafts: Yes…
Print with a couple perimeters and leave it hollow as seen in printing photo.
. Print Settings Printer: Don't matter Rafts: Doesn't Matter Supports: No Resolution: 0.1 Infill: 90 Filament: Any ABS Any Notes: Maybe need small resize x and y for shrinkage's compensation. Крышка должна накручиваться без усилий, но не…
I got a used RC8B3e with out a battery tray. so i try to make one on thinkercad Need a flathead self-tapping screw
Always seems like theres nowhere to put the antenna wire when installing different electronics. This fixs that issue.
Olight i3t/i3e/i18 flashlight holder for IKEA Skadis pegboard Print with supports
Comes with the freecad project. Hardware: 4x M3x12 Self-tapping 1x M3x18 ish Self-tapping 4xM4x10-16 (i used a tap and bolts, self-tapping will likely do. there is enough clearance for longer screws too) pre-tap before putting it in the…
BTT E3EZ NG Mount. This Mount is for the Ender NG of RH3D. you need 4 M3 Short heat inserts. Link of the projekt: https://www.printables.com/de/model/469280-ender-3-ng-corexy-beta
Prints good laying on its side as it is in the second picture with supports touching buildplate only. I'd recommend 0.12 layer height but I had good results with 0.2 as well.
A mount to put in a BTT Manta, with fitting fan mount and one mosfet mount. I decided to let the extruder run directly from the board and just use one of my existing mosfets for the bed. Unfortunately I just realised that I missed taking…
Sammler / Halter für Zeitschriften, Bücher oder Broschüren im Format A4 in verschiedenen Breiten. An den Stirnseiten jeweils ein Loch damit man es mit einem Finger leichter aus dem Regal ziehen kann. ……………… Collectors/holders for…
a router base plate for a Bosch MR23EVS router. I needed a bushing and didn't want to buy the whole kit. It should be a standard 3 hole pattern for other routers as well. The holes are still off by less than a millimeter but it works…
Stand für Olight i3E Eos Hexagon Halter für Olights. Alle Größen sind untereinander kombinierbar. Entweder einzeln stellen oder alle zusammen stecken, nach Lust und Laune. Weitere Modelle: ithx + i1R2 EOS:…
Fossil Watch Stand in three easy pieces. No supports or rafts should be necessary. No glue, friction fit. Fits a 26mm charging puck. Falster or Fossil and probably more. For stability fill the base with loose change or washers or anything…
The two halves are identical. Print the file twice. The model uses 5x2 magnets that are press fit. (If the magnets won't hold by pressing them in, use a bit of glue)
