Wyniki wyszukiwania: 45mm

Sortowanie

431 modeli

P
PrintablesPosterBored

Gravity Knife no-screw Remix - 45mm

I printed this for my son, beautiful print, but wanted one for myself. I made it 15mm longer so it fit my hand better. Make sure to paint the seam on the blade down at the bottom where you won't see it. 👍

Pobrania
3361
Polubienia
570
Ocena
4,79
P
PrintablesRudy Martin

5.56mm X 45mm NATO Bullet

FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…

Pobrania
1607
Polubienia
116
Ocena
5
P
Printablesis-serp

.223 Remington / 5.56x45mm NATO

The .223 Remington is a rifle cartridge developed in 1957 as a hunting bullet. A military version, the M193, was used by the United States Army in the M16 rifle. The 5.56x45mm NATO was also developed from the .223 Remington. Category:…

Pobrania
1599
Polubienia
94
Ocena
5
P
Printablespw.prints

RC Boat Propeller 3 Blade d=4mm D=45mm P=50mm DriveDog

Herewith i want to show you one of my designs for a 3 Bladed RC boat propeller. Outer diameter: 45mm Bore diameter: 4mm Pitch: 50mm Height: 19mm Type: DriveDog 3,7mm

Pobrania
1536
Polubienia
59
Ocena
0

K1 Max Lid Riser - 45mm (Vented)

What this project aims to solve: 1) The Lid of the Creality K1 Max 3D Printer sits a bit too low. The extruder filament feed constantly rubs on the glass during prints. Some people report getting a filament feed error due to the tight…

Pobrania
1412
Polubienia
108
Ocena
5
P
PrintablesJernejP.

Minimal Apple watch 7 45mm protective case

So this is a thin and minimal protection case for Apple Watch Series 7 45mm. Prints in 14m and uses only 1,4g of material.

Pobrania
1180
Polubienia
66
Ocena
5
P
PrintablesTobashadow

0.4mm & 0.6mm Nozzle size 45mm & 65mm First layer calibration squares

45mm and 65mm 0.2mm thick square for calibrating your first layer, the presliced files are set to pause at 160c extruder temp to auto bed level. Updated for 0.4mm and 0.6mm Nozzle version Gcode files and 65mm size

Pobrania
914
Polubienia
41
Ocena
5
P
PrintablesPeter H

SHOPVAC CAMLOCK VACUUM CUFF ADAPTER TO 45MM (ID)

DOWNLOAD CAMLOCK and find more accessories HERE. This fitting tapers from 45 to 46mm so it should fit anywhere a standard vacuum cuff would, and connect to the CAMLOCK end. It may be a slightly loose fit depending on the length of taper…

Pobrania
822
Polubienia
153
Ocena
5
P
PrintablesRudy Martin

Blue Magazine - 5.56mm X 45mm

Note: Before printing, please measure the size of the magazine slot of the gun you want, and fine-tune the size through the slicing software to avoid the situation that the magazine cannot be loaded into the gun.

Pobrania
819
Polubienia
110
Ocena
5
P
PrintablesSomatik

Tablecloth clip / clamp for a 45mm thick table

needed a tablecloth clamp for a 45mm thick table, remixed the great design by bramsky, and it works perfectly Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.20 Infill: 50 Filament: Prusament PETG…

Pobrania
817
Polubienia
78
Ocena
5
P
PrintablesLupis1

Dishwasher salt funnel, 45mm

Spare part funnel for Bosch or Siemens dishwashers to refill salt. Fits probably other brands as well. Funnel diameter 45mm.

Pobrania
663
Polubienia
79
Ocena
4,94
P
PrintablesAmyRayn

Fan 145mm

Fan 145mm

Pobrania
637
Polubienia
38
Ocena
4,5
P
PrintablesRisiko

Apple watch 7/8 series 45mm case

modified with just one speaker slot

Pobrania
553
Polubienia
29
Ocena
5
P
PrintablesGonzoStrange

Cooling Fan Booster (Velocity Stack) 20/25/30/35/40/45mm

In my research about exhaust and cooling fans these things work by normalizing turbulence created by the fan. When on the exhaust side air presses against the walls of the cone and eliminates the air from swirling back around the blades…

Pobrania
550
Polubienia
55
Ocena
4,67
P
PrintablesGeorge

Ender 3 (V2&PRO) or CR Riser Feet 45mm TPU

This is a remix of a remix . I rised the foot at about 48mm high (45mm the foot + 3mm the base) in order to have space for more cooling case for MCU and PSU. You can scale the foot only on Z in slicer based on your needs. Print…

Pobrania
511
Polubienia
92
Ocena
4,88
P
PrintablesPistonPin

TweezPickVic - keyring container for 45mm Victorinox tweezers + toothpick

The Victorinox SwissTool Spirit X is - imho - perfect. Except for the missing tweezers and toothpick - a fix. PS: FreeCAD source file included. Category: Containers

Pobrania
489
Polubienia
95
Ocena
5
P
PrintablesSascha S.

Heavy axis 45mm with steel insert

Hey everyone, here is my heavy axis 45 mm with steel insert. All you need is a 4 mm inbus and cut it.

Pobrania
485
Polubienia
42
Ocena
5
P
PrintablesBadNoodle

SSUPD Meshlicious 45mm Riser

The riser works with the stock Meshlicious rubber feet. No supports should be needed as long as you print with the feet facing up. I printed this on an extended ender 3, if you have a smaller printer, you may need to split the model in…

Pobrania
436
Polubienia
40
Ocena
5
P
PrintablesATBOT

End Cap, Square Tube 45mm OD

Designed to keep sharp edge of bench frame from scraping the floor when stored. It has about 5mm of material for protection. Also, wraps around frame so that sharp edge sits in a recess. I think it would scale to fit most thin wall square…

Pobrania
410
Polubienia
28
Ocena
4
P
Printablesfhartmann

Gegenlichtblende für Canon EOS R10, 18-45mm RF-S Mount

Beschreibung Diese Gegenlichtblende, welche auf das Objektiv mit Bajonettverschluss montiert wird verringert Streulicht Print Settings Printer: Prusa MK4 Supports: No Resolution: 0.2mm Filament: PETG black Update: 20260730 - Update…

Pobrania
407
Polubienia
43
Ocena
4,8
P
PrintablesJernejP.

Artsy Apple Watch Series 7 45mm case

Artsy Apple Watch Series 7 45mm case

Pobrania
400
Polubienia
37
Ocena
5
P
Printableszenzmatz

Toilet Sheep for 45mm inner rolls

Remixed the "Shaun the Sheep Toilet Paper Roll Holder" for toilet paper inner rolls with a diameter of 45mm. I also changed the head for less material usage. You have to print 1x Head, 1x Body and 4x Legs. I printed the Body upright with…

Pobrania
387
Polubienia
29
Ocena
5
P
PrintablesJCVB

Extra slim Camera Lens Filter Case (77mm, 67mm, 58mm, 52mm, 45mm)

A extra slim lens/photography filter case with magnets (6x2mm). Fits 77mm, 67mm, 58mm, 52mm and 45mm Filters. 92mm x 87mm x 10mm Maximum filter thickness 7mm

Pobrania
385
Polubienia
87
Ocena
5
P
PrintablesAlexKelo

Carvera Air Vacuum 45mm Adapter

Made this sleek, stiffened design to connect my DeWalt Stealthsonic Vacuum. Used 4 M3 x 8 screws to attach utilising already existing threads.

Pobrania
379
Polubienia
34
Ocena
5
P
PrintablesTommy3D Lab

Meteor75Pro Frame (45mmProp)

Alternative Frame for the Meteor75 Pro with 45 mm Propellers The propeller guard is not mounted to the lower frame with screws as usual, but instead secured with rubber bands, as shown in the pictures. The LiPo battery is also held in…

Pobrania
370
Polubienia
33
Ocena
0
P
PrintablesJaans

Simple in-drawer storage / organiser box with divider - 240mm L x 110mm W x 45mm H

Simple drawer box with dividers all sized 240mm L x 110mm W x 45mm H. Also includes “extension” box that fits wider / deeper drawers sized 180mm L x 110mm W x 45mm H. Basic structure that should print easy. I used ABS+ with typical 4mm…

Pobrania
368
Polubienia
24
Ocena
0
P
Printableszuberio

Print in Place 45mm Folding Cube - 0.5mm Clearance

My 6yo saw one of these on Thingiverse and wanted me to print it for him. Unfortunately the tolerance on that other model was 0.2mm - too tight for my printer. So I created my own with a 0.5mm tolerance and it works great. Exterior…

Pobrania
361
Polubienia
63
Ocena
4,5
P
Printables3dprintsfelix

Apple Watch Series 9 - 45mm Dummy

This is directly converted from the USDZ model from Apple. Use it as a dummy or for CAD purposes to make a case for example.

Pobrania
356
Polubienia
15
Ocena
5
P

Apple watch 7 45mm case with bump and button!

Model Orientation: Position the model face down, with the part that protects the screen in direct contact with the print bed. Print Settings: Printer: Ender 3 Filament: PLA Infill: 100% Supports: None Special Notes: Horizontal Expansion:…

Pobrania
355
Polubienia
28
Ocena
0
P
PrintablesGonzoStrange

45mm Replacement Fan Blade

45mm replacement fan blade for Hobbywing Max5 and possibly other 45mm fans. I made this a complete replacement vs a slide on design because I wanted the maximum amount of blade. A few millimeters matter when you need maximum cooling for…

Pobrania
350
Polubienia
14
Ocena
5
P
PrintablesRudy Martin

Blue Magazine - 5.56mm X 45mm - hollow

This is an improvement of the previous solid version. It is recommended to print the magazine vertically to obtain better quality. At the same time, please pay attention to the adhesion of the hot bed and the printing speed. Too fast…

Pobrania
330
Polubienia
64
Ocena
5
P
PrintablesMAKERTEAM®

MT-SYSTEM Holder L: Tripple Spray Can Holder 245mm (3fach Sprühdosenhalter)

This holder is made to take up to THREE… spray cans aerosol sprays fingertip dispensers disposable 0,5l cans like Coke, energy drinks etc. drink/coffee cups other round stuff with up to 70mm diameter The size L holders have a width of…

Pobrania
325
Polubienia
34
Ocena
5
P
PrintablesCrambambuli

Holder with Handle for Ammo box 5.56, 5.56×45mm NATO

Long ago i made Ammobox for 5.56x45 NATO. https://www.printables.com/model/85281-sig-550-ammo-box-556-556x45mm-nato-strip ( I updated also this models) Now you can have a Handle to Carry 3 Ammo boxes (150 rounds) or 6 or even more boxes…

Pobrania
321
Polubienia
77
Ocena
4,5
P
PrintablesFrank H

HONEYCOMB TAPEHOLDER 45MM

A simple tapeholder for the honeycomb wall storage system.

Pobrania
320
Polubienia
56
Ocena
5
P
PrintablesMikhail Gordin

Skadis pegboard bottle holder (t-nut mounting; 37mm, 45mm, 50mm, 58mm bottle sizes)

Bottle holders for Ikea Skadis pegboard using the t-nut mounting system . See that link for how to use t-nuts. These holder has interior diameters of 37mm, 45mm, 50mm, and 58mm. These are similar to the Skadis Bottle Holder - T-Nuts…

Pobrania
297
Polubienia
30
Ocena
5
P
Printableswehrenseb

Small Parts Container / Drawer Organizer 45mm Grid

Small Parts Container / Organizer I made those little containers to organize my screws and nuts drawer. The smallest one is 45mm x 45mm small and the others come in multiples of that: 2x1, 2x2 and 3x1. Best printed in 0.3mm layer height…

Pobrania
271
Polubienia
70
Ocena
5
P
PrintablesCorbyn Spencer

Awesome Filament Spool Rewinder - 45mm Solid Manual Axle

Modified Manual Axis 45mm for steel insert file and made it solid.

Pobrania
267
Polubienia
41
Ocena
0
P
PrintablesCrambambuli

Ammo box 100x 5.56, 5.56×45mm NATO

My stackable ammo box just bigger

Pobrania
266
Polubienia
26
Ocena
0
P
Printablescwlewis11

Small Fidget Spinner (45mm diameter)

Small 45mm diameter print in place fidget spinner with a short print time and a quiet spinning action. Tip: add a small drop of sewing machine oil to get an optimal spin. Check out my other models here 👀 See my other fidget models here 👀…

Pobrania
259
Polubienia
11
Ocena
0
P
Printablesmuhammedp903

Door hanger 45mm/35mm

Over-door hanger for clothes/towels/etc. Fits a standard UK 45mm or 35mm door. Requires a gap of at least 3.5mm above the door with the standard versions, or 2.5mm with the small-gap versions

Pobrania
259
Polubienia
32
Ocena
5
P

Dust Collection Adapter DeWalt Table Saw to Makita Vacuum Cleaner 65/45mm

This adapter connects the dust collection port (~65mm) of a DeWalt 7492 table saw to the big hose (~45mm nozzle) of a Makita VC1310L vacuum cleaner. The diameters are adjustable in the FreeCAD 0.20.2 model. So it may well work for others,…

Pobrania
254
Polubienia
50
Ocena
5
P
PrintablesTrukku

Modular Spice Rack (45mmx45mm Square Bottles)

After taking the step of buying matching white label spice bottles I was faced with making a decision as to how I'd store them. Storing them in the box they came in helped kick the can down the road long enough for me to become incredibly…

Pobrania
253
Polubienia
72
Ocena
5
P
PrintablesBibob93

Lichtfalle duchmesser 145mm für Growzelt

Diese Lichtfalle wurde speziell für die Zuluftöffnung von Growzelten entwickelt. Sie verhindert zuverlässig das Eindringen von Licht, ohne die Luftzirkulation stark zu beeinträchtigen. Der Anschlussdurchmesser beträgt 145 mm , ergänzt…

Pobrania
250
Polubienia
15
Ocena
0
P
PrintablesEFY

Best Sink Filter Strainer 38mm - 45mm Compatible

Design Description: Sink Drain Filter This design is a specially crafted sink drain filter aimed at enhancing the cleanliness and functionality of sink drains. Compared to traditional sink drains, it is more efficient and user-friendly.…

Pobrania
249
Polubienia
30
Ocena
5
P
PrintablesBeusekomse Baan

Nederlandse Spoorwegen serie 2200-2300 diesellocomotief - Spoor 1 (1:32 / 45mm track)

https://nl.wikipedia.org/wiki/NS_2200 24FEB2025: Laatste wijzigingen doorgevoerd. Nog uit te voeren aanpassingen en toevoegingen: Montage van Märklin koppelingen Stekkers voor trein-schakeling (multiple schakeling) op de bufferbalken.…

Pobrania
248
Polubienia
17
Ocena
0
P
Printablesechterhoff

Pavo Pico Prop Remover Tool for 45mm 3 Blade

This is a simple and easy printable tool to help you pull a 45mm 3 blade prop off a pavo pico motor. Since those props are only pressed onto the 1.5mm axle, you might have pushed them on a little to secure. Just to realize after some…

Pobrania
248
Polubienia
38
Ocena
4,67
P
PrintablesProfos

*updated* Tennisball raiser for front wheel on indoor trainer (25mm to 45mm)

On my Wahoo Kickr Core, mounted on Tennisballs, I always felt that my hands have a lot more stress, as on the street. After a bit of thinking it was clear to me that I raised the backend by about 50% of the height of a Tennisball, but not…

Pobrania
233
Polubienia
24
Ocena
3

Pixel Watch 3 (45mm) Charging Stand

A convenient little TPU Charging Stand for the Pixel Watch 3 (45mm). Just insert the Charging Puck as shown in the images, place it on your desk and plug it in. The Stand is contoured such that you can basically drop the Watch on to it,…

Pobrania
232
Polubienia
15
Ocena
4,67
P
Printables2DW

Hole cover plate 45mm

I cut some holes in a built-in closet I made but then realized that cover plates of this size are very difficult to find. The cover plate is friction fit. I printed it in PLA and it came out beautifully.

Pobrania
231
Polubienia
23
Ocena
0
P
PrintablesRené Düttra

Heavy Duty Over Door Coat Hanger (45mm door frame)

This is a remix of Heavy Duty Over Door Coat Hanger to fit 45mm wide door frames. Also, rounded some of the edges to smoothen the model a bit. Printed with PLA 0.2mm, no support required. All credit to @B&B TECH:…

Pobrania
230
Polubienia
19
Ocena
0
P
PrintablesJernejP.

Apple Watch Series 7 45mm case - aka Spiky =)

If you want spikes in your wrists this case is for you =)

Pobrania
229
Polubienia
21
Ocena
5
P
Printablessquirrelf3d

Ender 3/pro/v2 Feet Riser - 38mm/45mm total clearance

This is an old design of mine, nothing fancy, simple but they work well. v1 might interfere with cases that fit under the printer. v2 has the same rail shape, but has a vertical inner wall to avoid colliding with cases that go under the…

Pobrania
229
Polubienia
28
Ocena
5
P
PrintablesPrintbird

45mm Rotary Blade Thread Cutter

Designed for chain pieced fabric thread cutting, or thread cutting in general. Reuse your old 45mm rotary cutter blades. You can use the hardware (minus the blade! See my other design for that “mini” size) from a 28mm Rotary Cutter from…

Pobrania
223
Polubienia
34
Ocena
0
P
PrintablesMartin_au

Vial rack for 4 ml (15x45mm) or 12 ml (~15x100mm) vials.

Vial racks for 4ml - 12ml vials. Each vial rack includes text on the side so that the users can avoid overheating the plastic racks. These should just fit on a 200mm wide bed. They hold 50 vials.

Pobrania
216
Polubienia
19
Ocena
0

Chess Board Hidden Puzzle (45mm cell size)

This chessboard is intended for Chess sets that fits a cell size og 45mm . History I have long wanted a nice printable chess board with the possibility of adding even more cells or larger cells if this would be needed. I should be…

Pobrania
204
Polubienia
25
Ocena
0
P
PrintablesBasementLAB

Futuristic Design Handles - Maniglie design futuristico 105x240x45mm

Futuristic Design Handles - Maniglie design futuristico Overall dimensions: 105x240x45mm Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thks

Pobrania
200
Polubienia
51
Ocena
5
P
PrintablesGhrrum

145mm OD Bahtinov Mask for 114mm Telescopes

“The Bahtinov mask is a device used to focus small astronomical telescopes accurately.” This thing is essentially used for astrophotography to get things in focus using diffraction. The short and sweet is that you stick this thing on the…

Pobrania
197
Polubienia
6
Ocena
4
P
Printablesallabout3dblog

Tarpaulin clamp for INTEX pool (45mm pole)

Simple clamp to fix the tarpaulin on INTEX pools. This should avoid the tarpaulin to be blown away on windy days. I recommend to print this with somehow elastic filaments like ASA or ABS. To keep the camp flexible i also recommend to…

Pobrania
193
Polubienia
37
Ocena
0
P
PrintablesArek

Vacuum adapter (45mm male to 35mm female)

Vacuum adapter (45mm male to 35mm female). Tested with DeWalt DXVCS002 Cyclone Dust Collector 45mm socket and Parkside PWD 30 C1 35mm vacuum hose. Print without supports. Fusion and step CAD files are available.

Pobrania
190
Polubienia
12
Ocena
5
P
PrintablesClumsy Badger

Leatherman Wave Belt Holder (Wider 45mm belt loop)

Remixed to allow for a wider belt (increased belt loophole to 45mm) Print with standard supports (everywhere) Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Amazon…

Pobrania
189
Polubienia
27
Ocena
5
P
PrintablesAuamarto

Speedloader with clips 5,56 x 45mm .223Rem

Both clip and loader require changes in orientation before print. Loader require support (check if support is properly generated in magwell) Update: added slim and compact version print without any support Infil: 20% Printed in: PETG…

Pobrania
188
Polubienia
26
Ocena
4
P
PrintablesMateusz Tokarz

Plant Seedling Starter Trays | Standard 45mm | 14 Sizes

BOM: Printed with ROSA3D High Speed PLA Light Gray and Starter PLA Black Get a head start on your garden! These are standard-sized seedling trays optimized for 3D printing. They are incredibly lightweight, using minimal filament while…

Pobrania
184
Polubienia
75
Ocena
5
P
PrintablesNorbert

Riser feet for Anycubic Vyper 45mm (+4mm)

Nach dem Umbau auf "Anycubic Vyper Silent 120mm Fanmod" brauchte die Vyper mehr Bodenfreiheit. Deshalb konstruierte ich diese Füsse als Ersatz für die Originalen. Beim Drucken benötigt das Loch Support (TouchingBuildplate/Grid). Gedruckt…

Pobrania
183
Polubienia
25
Ocena
5
P
PrintablesHenlor

Self-Lubricating Brass Bearing 10-14-45mm - CAD Model

This model is meant to be used as an asset in CAD software, not to be 3d printed. My ultimate goal with this CAD model series is to release at some point an assembly model of the whole K1 to help creators design amazing things for this…

Pobrania
182
Polubienia
47
Ocena
0
P
Printablestoshofalls

Canon EF-M 15-45mm Lens Hood

This lens hood fits a 15-45mm EF-M mount lens, like on a Canon M50. I checked to make sure that the hood did not interfere with image quality or add a vignette in the corners. It snaps into place on my lens.

Pobrania
179
Polubienia
16
Ocena
4,5
P
PrintablesSamuel1698

Multiboard Bottle Holder (45mm & 50mm)

Printed with supports. 5% infill. PLA

Pobrania
177
Polubienia
15
Ocena
5
P
PrintablesPrintSideways

Ice Cream Cup 45mm

An ice-cream cup that can be printed without supports.

Pobrania
176
Polubienia
28
Ocena
5
P
PrintablesKevFPV

Doppelrosette Heizung 45mm - 75mm

Variable Doppelrosette für die Heizungsrohre. Rohraussparung hat 20mm und ist drehbar bzw. Variabel. Ich habe es ohne Stützen gedruckt, kann aber in manchen fällen hilfreich sein. Verkleidung für die Rohre werde ich irgendwann noch…

Pobrania
166
Polubienia
15
Ocena
5
P
PrintablesJoshStrobl

Canon RF-S 18-45mm F/4.5 Rectangular Lens Hood

This is a modification of the "Canon 50mm F/1.8 Rectangular Lens Hood". It's been scaled down to fit the Canon R50 kit lens, rotated the bayonet mount 90deg so it'd mount rotated at correct orientation. I printed this in PETG-CF at 0.1mm…

Pobrania
165
Polubienia
8
Ocena
0
P
PrintablesTaro Hayashi

Diameter 45mm Length 100m

Fit for Inomata-k

Pobrania
161
Polubienia
4
Ocena
5
P
PrintablesMearcat

Pouring spout for metal petrol/gas canisters - 45mm

Some metal storage cans used for storage of flammable liquids (such as gas/petrol, thinners, paint materials) have a 45mm OD outlet however it's not a DIN45 thread as used on plastic petrol containers, as the thread depth is only about…

Pobrania
157
Polubienia
18
Ocena
5
P
PrintablesNigeke

GRAVITRAX height stone H=145mm with pass through

GRAVITRAX ; always short of height stones? Not anymore, just print your own! GRAVITRAX height stone (column) H=145mm with pass through (v.20211110.r04) This one is 145 mm height; compatible with 2pc Gravitrax, Pro Vertical (2*70mm) and 5…

Pobrania
155
Polubienia
16
Ocena
0
P
PrintablesMwc

Groundspike Lid for / Hole Cover Brabantia Washing Line (45mm)

Hi, this is my first time on Printables (please be kind). I wanted to make a groundspike cover - or washing line hole cover for my Dad, who either lost his or never got one. This one is for a diameter of 45mm, and modelled on my OEM one.…

Pobrania
151
Polubienia
9
Ocena
4
P
PrintablesForsakin

Remix - Pixel Watch 3 (45mm) Charging Stand

Printed in PLA with a slighter larger diameter for the charger to fit in it. Also slightly larger lip for the 45mm to sit in. All settings the same as original by EBD Design Studio.

Pobrania
148
Polubienia
13
Ocena
4,67
P
Printablesgios07

91 bits 4mm Hex bit holder for 28mm and 45mm

Needed a way to organized (combine) all the different 4mm Hex bits from different kits, while leaving space for more unique bits. This case has slots for 91 total bits (regarding the number, it is my take on individual bit types I use…

Pobrania
144
Polubienia
36
Ocena
0
P
PrintablesKhale_XY

Rigid Shop Vac to Ryobi Sander Adapter (45mm to 36mm)

Use case: If you have a sander, you probably get annoyed at how much saw they produce, even wearing a mask doesn't help, especially if you do projects indoors even in a ventilated space. By using shop vacuum connected to your sander, it…

Pobrania
142
Polubienia
19
Ocena
0
P
PrintablesAndreas G

Keine Werbung Schild 20x45mm

“Bitte keine Werbung” Schild (sign) Gcode beinhaltet einen Farbwechsel (gcode contains a color change) 20x45mm

Pobrania
140
Polubienia
11
Ocena
4,67
P
PrintablesHolzerMax

Holder for 45mm Vacuum hose

I find that I need to have everything directly at hand to actually use it, especially with stuff that is used for cleaning up. So this holds my 45mm vacuum hose at a handy height at the side of the workbench. I printed it in PLA with a…

Pobrania
140
Polubienia
19
Ocena
5
P
PrintablesArek

Ryobi Router (R18TR) dust collection for 45mm vacuum

Dust collection for Ryobi Router (R18TR) to use with vacuum hose equipped with 45mm connectors. Tested with 45mm hose from DeWalt DXVCS002 Cyclone Dust Collector. If you want to use it with home 35mm vacuum then you can try using Vacuum…

Pobrania
140
Polubienia
24
Ocena
5
P
PrintablesWiki Fišer

Handle (145mm hole spacing)

Simple handle I made for production at company I work at. Distance between hole centers is 145mm. ----------------------------------------- Jednoduchá ručka co jsem vytvořil do produkce v naší firmě. Rozteč děr je 145mm.

Pobrania
137
Polubienia
18
Ocena
5
P
PrintablesReclip

5.56x45mm NATO

5.56x45mm ammo for training purposes

Pobrania
134
Polubienia
24
Ocena
0
P
Printableseagleeye

Tank spout (45mm)

A spout for clean and controlled refilling of canisters/tanks, the thread is ~45mm Nut and spout can printed in any material, I've printed the seal in TPU but it may be possible without it.

Pobrania
133
Polubienia
16
Ocena
5
P
PrintablesNigeke

GRAVITRAX height stone H=145mm

GRAVITRAX ; always short of height stones? Not anymore, just print your own! GRAVITRAX height stone (column) H=145mm (v.20211110.r04) This one is 145 mm height; compatible with 2pc Gravitrax, Pro Vertical (2*70mm) and 5 mm Base Plate…

Pobrania
132
Polubienia
14
Ocena
0
P
PrintablesCartridge_Man
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
130
Polubienia
39
Ocena
5
P
Printablesachwarumnicht

Mudguard Bridge / Schiebebrücke SKS 45mm

I used PLA, which works nicely, but I would recommend PETG.

Pobrania
127
Polubienia
10
Ocena
5
P
Printablesbrass_ring

5.56X45mm Stacking Loading Block

5.56X45mm stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

Pobrania
126
Polubienia
21
Ocena
5
P
Printablessteve

Skadis 40mm to 45mm width adaptor (e.g. for Netgear GS105)

The pegs can be used to adapt the 40mm spacing to the 45mm of a Netgear GS105, or any other device with that pattern. In “reverse” order, the pegs can provide a 35mm width pattern. The holes are 3.5mm to be tapped M4 and the tolerances…

Pobrania
126
Polubienia
15
Ocena
5
P
PrintablesBerto3d

Porta Tastiera Sim Racing Keyboard Holder Profile 45mm

Pla or Petg 30~40% infill without support. Brim yes. Layer 0,2mm.

Pobrania
125
Polubienia
22
Ocena
0

Sectioned Magnetic Chessboard +Box, with Chess Notation Labels and 45mm Interlocking Squares

These files allow you to make a chessboard which also transforms into two stackable boxes that each hold the pieces from one of my two chess sets Backyard Birds Chess Set and Woodland Squirrel Chess Set (or any other set of similar size.)…

Pobrania
124
Polubienia
26
Ocena
0
P
PrintablesDennis Nilsson

Golf Simulator Tee 45mm TPU

This model prints quickly in TPU using a small amount of filament. Will probaly string in the slots but this is a function over form model.

Pobrania
122
Polubienia
4
Ocena
0
P
PrintablesCaleb_3D

Dichtring 145mm für Creality LD002H, LD-002H VAT Tank, Seal ring

Dichtring VAT Tank LD002H creality Mir ist der Dichtring vom VAT Tank kaputt gegangen da habe ich diesen gezeichnet und gedruckt mit TPU A95 und Raft, dieser passt sicher auch in ähnliche Tanks Durchmesser ca. 145 mm Sealing ring VAT Tank…

Pobrania
120
Polubienia
4
Ocena
0
P
PrintablesNozzle

Scheppach HMS1080 Hobel Absaugadapter 45mm innen Durchmesser

Adapter für den Abricht- Dickenhobel. Ich verwende diesen mit einem Festool 36mm Schlauch. Die Muffe ist ca. Ø45mm

Pobrania
114
Polubienia
3
Ocena
0
P
PrintablesDesertpilot

45mm PTFE Jig

Straight cut 45mm length (for 4mm outer diameter) PTFE jig to assist my nozzle changing Qidi X-Plus and X-Max stock normal (low temp) extruder brethren. Some older X-Max's use 36mm tubes, so I just posted that version so nobody misses the…

Pobrania
113
Polubienia
12
Ocena
5
P
PrintablesLinus1997

XPAN I&II Lenshood Shade Fuji TX-1 TX-2 for 45mm

Simple Lenshood inspired by the original one

Pobrania
112
Polubienia
7
Ocena
5
P
Printablesfroetz

45mm RAM Connector

Customized version of http://www.thingiverse.com/thing:267879 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=267879 This is a short Ram-Mount-compatible arm, which you can clamp with only one M6-Screw.…

Pobrania
110
Polubienia
15
Ocena
0
P
Printablesscooter_magavin

45mm x 50mm tray with front lip w/ single small hex attachment for the HSW

45mm x 50mm tray with front lip w/ single small hex attachment

Pobrania
108
Polubienia
35
Ocena
5
P
PrintablesRyan Polivnick

NYOS Quantum 160 skimmer 45mm stand

Increases the height of the skimmer by 45mm providing 40mm of clearance underneath. It increases my skimmer's performance because I have a deep sump and now mount my heater underneath the skimmer. The base plate has indents for the…

Pobrania
106
Polubienia
6
Ocena
0
P
PrintablesSknown

Curtain holder ring, 70mm and 45mm

This is curtain holder ring, which easily hold curtain. This is modified models from bos's ( https://www.printables.com/model/358585-curtain-holder-ring-90mm/files ). The original one is larger diameter for curtains in my house. Then, I…

Pobrania
105
Polubienia
15
Ocena
0

Skadis 45mm "Heavy Duty" Hook

A stronger version of CSD Salzburg's 45mm hook Category: Organization

Pobrania
104
Polubienia
19
Ocena
5
P
Printablesdfoles

Concentric Rectangle Bed Level - Replicator Dual / FlashForge Creator Pro / PowerSpec Pro 3D / 225mm x 145mm bed

Check out my new Bed Levels ! This is a test print I made to help level my bed while it's printing. It is currently made to fit a 225mm x 145mm bed, which would cover the MakerBot Replicator Dual, FlashForge Creator Pro, PowerSpec Pro 3D,…

Pobrania
103
Polubienia
7
Ocena
5