Liczymy pasujące modele…
Model for use in checking fit, as accurate as it could be using only a mm transparent flat ruler STEP, STL and IPT included Wires extruded 8mm to do fit without bending but are flexible enough to be maybe 2mm clearance on the real model…
Wydruk około 1,31 €–1,61 € nettoWstępna wycena jednego wariantu
Print a Hextraction board on your Prusa Mini+! Print two of the A sections and two of the B sections to replace the standard 5-15 and 5-7 plates. Five of the original clips are needed, as well as two of the slightly modified clip included…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Simple opening and closing spanner for standard 4- or 8-ribbed lids of canisters between 1L-60L volume (DIN 45 thread, Ø48.2mm | DIN 51 thread, Ø58mm | DIN 61 thread, Ø65mm). Turn tool around or use the included insert depending on the…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The second version of the stand for painting models with hinged holders and larger locking wheels. M3 nuts and screws Bearing 608
Wydruk około 1,41 €–1,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Well there is not much to say, its a holder for the 28BYJ-48 stepper motor. It uses two M4x18 bolts and two 7x3.2mm nuts for the motor mount. To mount it on a surface you just need two screws. It has great tolerations so even a non…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
An 90 degree adapter to connect a Dewalt DWE7485 Table Saw (65mmOD) to 2 1/2" (ID) Clear PVC Dust Collection Hose, created in Fusion 360. Please note that the print time could be reduced by manually optimizing the print supports (in…
Wydruk około 10,92 €–13,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adapter is curved so you can use inside a wood table and use a vacuum with 40mm hose. Curved prints are hard to print without support so I added also gcode with tree support as I have printed it. You can move printed part also when…
Wydruk około 3,78 €–4,61 € nettoWstępna wycena jednego wariantu
Dewalt 7485 Table Saw Vacuum Adaptor for Ryobi Shop Vac
Wydruk około 4,26 €–5,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The print in place mecanum wheels were ok, but suffered from the use of PLA for the rollers, which really limited the surfaces that they functioned properly on. I did consider a new self assembly wheel with TPU rollers but discovered that…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
28BYJ-48 Stepper Motor Mount I am not sure where we found this model, it may have been from another source. I do not claim ownership of this model. We have been using it in our electronics and robotics classes.
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Made this to enclose my DIY Open DMX. It will be used to run my MiniLED moving heads from eBay. USB RS-485 to DMX You can buy this here! https://www.makexyz.com/store/usb-rs-485-to-dmxxlr-case-95eda30fbea0a5ab0e2d973d72049946 Print…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
1992 Formula 1, Pre-Season Testing The life of a successful modern Formula One car starts with the germ of an idea, a creative spark, a flash of brilliance. It rapidly moves to exploration in a digital world where simulations are run and…
Wydruk około 5,43 €–6,63 € nettoWstępna wycena jednego wariantu
EN: Chain guard for Orbea with chainring 48 teeth DE: Kettenschutz für Orbea Kettenblatt mit 48 Zähnen Use four M5x10 screws with lens head and M5 screw nut to fix the chain guard.
Wydruk około 1,79 €–2,19 € nettoWstępna wycena jednego wariantu
Imagine never spilling powdered detergent again or guessing how much you're using. This compact and durable 3D-printed dispenser gives you full control and consistency with every load of laundry. This system is built around a TR48x12 ISO…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
Another old wooden puzzle now cast in plastics. I like that one because there are 6 strictly identical parts whose shape hardly tells how to do. Sliding is the trick BUT slippy material will not help, two hands are a minimum. Find your…
Wydruk około 6,00 €–7,34 € nettoWstępna wycena jednego wariantu
Printing Instructions Filament Material Advised PETG/PET/ASA Material Propaties Required Property Type Constancy Hard Durablity Not brittle Sun Bleaching Protection depends on use case but would advise for long term use not using PLA Heat…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A little support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Replacement of the plastic insert into rail holding the basket. That prevents the basket-holding rail from leaving the guiding wheels. It gets easily broken over time and is almost impossible to get hold of replacement. Recommend printing…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My friend Obgr needed a modified version of Antspy's fan adapter for his two Supermicro CPU heatsink SNK-P0048P. I first tried to modify the original file, but realized that I rather do it as a parametric design in blender Geometry nodes.…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tisk opět na dvě poloviny, PLA, výplň 10%, tryska 0,4.
Wydruk około 2,81 €–3,43 € nettoWstępna wycena jednego wariantu
Laptop stand to hold the Dell Latitude 7480 (~2018) laptop vertically with the screen open 180 degrees placing the screen at a more ergonomic height (using an external keyboard & mouse). Print fit-test Take 10 minutes to download and…
Wydruk około 4,84 €–5,92 € nettoWstępna wycena jednego wariantu
Ferrari 488 GTE LMGTE Team AF Corse #51
Wydruk około 6,09 €–7,44 € nettoWstępna wycena jednego wariantu
GST3D spool with just 48g and 33min print time per side.
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
Kann z.B. in Stallschränken eingebaut werden, damit die Mäuse nicht durch die Lüftungsbohrungen in den Schrank gelangen.
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Based on RobNee_76719 's excellent idea and design , modified to fit the 120W charger. Original explanation below: Anker USB C adapters have USB C ports that don't always grip the cables tightly. Cables are prone to slipping out when…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
Tisk na dvě poloviny s podpěrami, tryska 0,4, PLA.
Wydruk około 3,24 €–3,96 € nettoWstępna wycena jednego wariantu
I tried to model cup. But you can use it however you like I look forward to your makes Happy printing!
Wydruk około 2,16 €–2,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recommended print settings: Material: PLA/PETG Layer Height: 0.15 mm or less Infill % : 50+ Supports: Yes Print Orientation: Default as modeled
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
oprava ulomeného zobáčku pro držení "skla" blinkru
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are fixes for the plastic parts that hold the handle. It is compatible with the Frigidaire Gallery series model FMT148GPB1, I'm not sure about any other. I've also included a larger bottom part (our microwave door's whole corner was…
Wydruk około 1,32 €–1,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Beim Drucken von PETG mit Raft unbedingt mit dem Prittstifft auf Texturblech einen Klebe-Trennfilm auftragen. Ansonsten gibt es Probleme beim Lösen! Durch den Schlitz können Sie gut 10 mmbreites RGB-LED Leuchtband von der Stirnseite…
Wydruk około 2,25 €–2,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mit diesem Stabsystem können Sie Batterie-Akku Zellen TypAA aufbewahren oder verschalten paralleloder Seriell!
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
Pieza 48 Marta y Santiago
Wydruk około 3,64 €–4,45 € nettoWstępna wycena jednego wariantu
An improved version of this model is available at: Hundreds of Metric Hex Screws Version 2 The screws are inspired by DIN 933 / ISO 4017 metric screws with hexagonal head and long threads. The standard screw design has been slightly…
4-11-22 updated model with stl parts
There's a model for a 48mm thread (usually from European 5-6l bottles) and for a 28mm thread (ex. Coca Cola bottle). Using a 48mm thread is recommended because the seeds don't get stuck Poke a small hole in the center at the bottom of the…
I wanted a zero clearance insert for my DeWalt DWE7485 jobsite saw and printed another I found online but it didn't fit my saw very well so I set out and whipped this one up. The insert fit well enough and was fairly straight forward to…
A giant-scale version of the LEGO Flower "Plate 1 x 1 with 5 petals” (24866) piece from 2018, intended for use on the popular Giant LEGO Wreath . Interior diameter of the fitment is 30.0 mm; the same as the basic 1x1 stud piece. Redrawn…
A minimalist WC door hanger , inspired by the iconic single-line aesthetic of the 1970s cartoon La Linea . Its clean, playful silhouette and clear toilet symbol make it an excellent fit for homes, hotels, offices, gyms, and wellness…
I've included a blank label and “Rotary Tool”. Easy to add text in a slicer - I used BambuStudio. I used raised text and printed on the face with supports. You could also print the text flush for a cleaner surface and no supports needed.…
PackUp Labeled Nesting and Stackable Bins for Milwaukee Packout Organizer Models 48-22-8430 and 48-22-8435 A nesting divider bin system with customized labels for your Milwaukee Packout organizer. October 23rd 2025 Updates: Parametric…
These are 2-, 4-, 6-, and 8-stack versions of the HSW 211x248 wall panel. Print at 0.28 layer height with 5+ perimeters to avoid infill. There is a one-layer separation between each panel. Import the STEP file to your slicer, split the…
Fits this case: https://www.milwaukeetool.com/Products/48-22-8435 https://www.homedepot.com/p/Milwaukee-PACKOUT-5-Compartments-Small-Parts-Organizer-48-22-8435/303005752 Make a custom organizer for your stuff!
It works on OEM and S15 mags. I take no liability as this was just a fun project and should be a stepping stone for anyone that is considering a magwell.
Trimmed version of Gdschaf border to fit the Honeycomb storage wall 211 x 248 panel, which is about the largest panel you can print on a Bambu Labs printer.
EDIT: May 2025 These labels have worked pretty well for me but I'm kinda hamfisted and I've managed to break a couple of them so I decided to make a stronger, more rigid version. There's not much left of the original design at this point.…
This picture frame comes with a backboard that allows for easy assembly and a snug fit. The thick version of the backboard provides more space for thicker materials or accommodates a glass or acrylic sheet over the picture. The frame is…
This model is compatible with the lego system.
--Updated V2 Available Now!-- Features 3mm alignment pins and better clearance! Use standard nails as alignment pins for more consistent driving. This is a fork seal driving tool for use with 48mm diameter dirt bike forks. This was…
Roland PA-48 N Key-Hammer for White Keys These hammers always break at the same spot. The official spare parts are difficult to get and too expensive. To make your own spare part you need the weight from a hammer. This is easy to break…
This is my model of the awesome SpaceX rocket Super Heavy Starship. The model is in 1/48 scale so it is almost 2,5 meters tall. The assembly is rather simple as I had marked all the parts with individual numbers so that you know how to…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Small and simple actuator using a 28BYJ-48 stepper motor. Re-used an existing helical gear and rack design and created a new base and mounting boss + pin. Needed a quick and dirty solution so this actuator is created using basic shapes in…
Tested and printed without issues using Cura slicer. Hello everyone, I've prepared for you this model of the Czechoslovak heavy-duty truck Tatra T-148 S1 in 1/18 scale with working steering, suspension, dump bed, doors and bonnet. Along…
I designed this rack to fish 48 holo nail polishes. It might fit other brands too but it wasn't tested. It is designed for bottles 28mm X 28mm. It is very sturdy and was designed to be "cat proof" as there has been an incident involving a…
This is a 28BYJ-48 stepper motor mount. It's the stepper motor that comes with the Elegoo Arduino starter kit. Will allow you to attach the motor into this 3D printed part and then you can attach it to a flat surface. Print Settings…
Originally made for cheap tiny lathes like those sold on Amazon ( like so ). Remixed from mdkendall's excellent design that provided the basis for this smaller version. Thanks mdkendall! This version mini-fies the design to: work within…
Somehow I keep loosing these adapters, so here is a 3D printable set of anything I could think off. Obviously print them in a colour that doesn't allow light to come through, black is a good choice. PETG seems a good choice, it is a…
This is a wall mount for Guition ESP32-S3-4848S040 ESP32-S3 based touch screen, which can be purchased without the relay base. The relay base doesn't fit in a standard 60mm diameter appliance wall box, so if one doesn't really need the…
Check out our Discord for wiring diagrams and resources on how to build these DIY Sim Racing Steering Wheels! www.discord.gg/turnracing The .zip folder includes: -3d Printable Files -Bill of Materials -CAD Files -DXF Files -Renderings…
This model is compatible with the lego system.
A 35mm DIN rail compatible housing to hold a WeMosD1 Mini and a common RS485-to-TTL Adapter. Print instructions Parts 1x 2 Pin KF301 Screw Terminal 1x RS485-to-TTL Adapter 1x WeMos D1 Mini (microUSB Version, ESP8266) 1x 1mm Optic Fiber…
The wheels are for WORX Landroid PLUS WR148E. Diameter 220mm. The Weigths from the old wheels can be used (have to be used) Improves spinnig wheel problem. I print the Cover and Hubs in ASA (can be printet also in PETG or PLA) The Tire is…
29T pinion compatible with the Kyosho Fazer FZ02 RC touring car. Provides additional torque/acceleration over stock 32T pinion, at the expense of some top speed. Pitch is 48DP (48 teeth per inch of diameter) and should be compatible with…
Contiguous United States (Lower 48) Topographic Map with Hydrographic Features For those times when you just want to print everything at once – this is the lower 48 states in the USA of Plastic project combined into a single model. Lower…
This is a remix of Jakeleeee's Prusa Mini 48deg heatbed connector cover, which stretches it to be about 3mm longer, to provide the additional clearance that I found was required on my Prusa Mini+ to allow the cables to exit without being…
Low Poly edition of the USA Lower 48 States In this model all elevations are square root scaled to reduce high elevation outliers and enhance low elevation detail. Find the full resolution USA lower 48 states combined here and print…
***IMPORTED FROM THINGVERSE*** Details Modified the Parametric Rugged Box by TheSameNameTwice to hold 48 AA batteries. They have an AA holder as well but it holds fewer batteries and isn't staggered. I chose 48 because that's the size of…
Sunton ESP32S3 8048s043c 4.3" Screen Case https://www.aliexpress.com/item/1005004788147691.html?spm=a2g0o.order_list.order_list_main.21.51981802EHw6b4 Using OpenHASP https://www.openhasp.com/0.6.3/ For the back to screw on, I used M2x12…
Not meant for printing, although I guess you could. This is just a blank to use to generate foam inserts with. Looked around and couldn't find anything for these. I imagine this could be used for the small and large cases too but I don't…
Added a Fillet on the face to ease the handle usage. I also simplified some of the surfaces created a Fusion 360 file and 3mf and strengthened the body of the clips. I use the Add Part > Text command with the “cut” Operation in…
See https://www.amazon.com/gp/product/B087B5NWY4/ref=ppx_yo_dt_b_search_asin_image
This model is compatible with the lego system.
This model is compatible with the lego system.
This portable drill press is designed for Makita DHP480 18V Cordless Drill . The drill is attached to the drill press sled from the conical torque setting ring, as shown in pictures. The torque setting ring in this particular drill model…
This is a 3D printable model for a peristaltic (aka hose) pump for either 3mm or 4mm silicone hoses operated with the popular and cheap 28BYJ-48 stepper motor. The motor is usually sold with a fitting driver shield and there are various…
Case for HAMTYSAN 7 Inch Portable Monitor External Display 800x480 for: https://www.amazon.com/dp/B0B8S9DYQC Legs used also as a harness for Raspberry Pi 4 Model B case, from here: https://www.amazon.com/gp/product/B07D3S4KBK
Don’t have a resin printer? You may buy the model at N'Tastic Scale Models: https://www.ntastic-scale-models.co.uk/shop/under-licence-range-slanjonok-range/WLZIUUC3AWPRTNDKJOPXNJVZ ---- 6ts manual operated crane, as it was used on larger…
Just a side kick of my normal designs… may be someone has use of it. 😊 If you need a girl with phone in sitting pose - there is already one here (called "WrongTimeGirl"): https://www.printables.com/de/model/316751-passengers-for-steam-bus…
This model is compatible with the lego system.
A simple mount for a 28BYJ-48 stepper motor and driver board to keep things tidy. NOTE: Just got a batch of 28BYJ-48s. Motor mount fits well, but the driver boards were a tiny bit large for my control case, so you may have to scale yours…
Case for "CYD 3.5" capacitive touch. (ESP32-3248S035C) Display and case on one level. For example: https://de.aliexpress.com/item/1005005928255980.html?spm=a2g0o.order_list.order_list_main.11.4a535c5fYamG2U&gatewayAdapt=glo2deu Fits the…
This organizer holds 4 sets of 12 hex bits. 3 rows are .875" deep for extended length bits, and 1 row is .375" deep for shorter bits. Two model versions are available, with and without labels. I chose to fill them with the following bit…
Meant as a side kick only my “girls with phones”- design became unexpectedly popular. There seems to be a great demand for figures of the better half of the mankind. 😉 As I had made them anyway, here are some more girls and (not to…
RUS: Корпус для самодельного лабораторный блок питания, на основе модуля XY6020L и импульсного блока питания. Корпус спроектирован специально для печати на 3д принтере без поддержек. Список компонентов: Регулируемый модуль постоянного…
Upload from thingiverse: https://www.thingiverse.com/thing:2946483 Fixed and fully printable
Endkappen für VELUX 948474 Insektenschutz Rollo ZIL passend für Insektenschutzrollo ab Januar 2003 (AN 01) Ein Set im Original kostet ~25€ + ~10€ Seil am besten mit dem Runden Teil nach oben drucken + überall Support Mit guten PLA sollte…
M3 nuts and screws Bearing 608
Involute tooth form was generated with Gearotic Motion software Print instructions 3 Perimeters Supports 20% Infill
Nowadays we imagine rail cranes in construction work only or in case of rail incident, but in earlier days of railways such cranes were quite commonly used for normal cargo handling. Yard cranes able to load/unload road rail containers,…
This model is compatible with the lego system.
Full video is on my YouTube Channel : https://www.youtube.com/@SmartHomeCircle
This model is compatible with the lego system.
Like my cows: https://www.printables.com/de/model/302165-cows-for-slopes-ramps-and-flat-surfaces-1-148 I now need sheep for my Thornycroft-JJ-type double deck cattle truck (I will upload separately). Since the sheep offered by model…
Creating a cattle body for my Thornycroft-PB-lorry I liked to have a cow walking in/out. There are a lot of cows available on the marked from different model railroad makers, but surprisingly all of them assume a flat surface, what would…
Some time ago I published my Thames river barge: https://www.printables.com/model/395615-oit-thames-river-barge-1-148 But what is a barge without a tugboat isn’t it? Fortunately, in the same book we found plans of the barge also lines and…
Hello! So this is a combination of two STLs I found online. I combined the clips from the Sentro as well as the shape of the Addi tensioner. Please Note: This is not for the Addi Express or Addi King Size Machines, if you need a tensioner…
A highly visible (and in my opinion, super cool) set of wormhole tokens for use in Twilight Imperium 4th Edition. This is a multi-color remix of the wormhole gate tokens for Twilight Imperium 4 by Vypper on Thingiverse. Just set a color…
This model is compatible with the lego system.
![Twilight Imperium Wormhole Tokens [thing:4866300 remix]](https://media.printables.com/media/prints/317986/images/2777025_a621fef1-5cb2-4840-9242-7b7df00b92aa/pxl_20221120_190403314.jpg)
