Wyniki wyszukiwania: 4cm

✔ 14cm angled-end hanger for tool hole wall

Info: simple 14cm hanger for metallic hole wall (1cm square holes) 40/50%+ infill, 3 perimeters I have used PLA (so it is not that flexible) no supports

VONT Flash Light Holder https://youtu.be/Idu4CmVmfxc

VONT Flash Light Holder 2Video link https://youtu.be/Idu4CmVmfxc 7.50 mm X 50mm Wrist Mount.

Most Popular Clay Texture Roller Set – 4cm Wide (Interchangeable)

This Most Popular Clay Texture Roller Set includes a collection of highly requested and widely used patterns. The 4 cm wide rollers allow you to cover larger surfaces quickly and create consistent textures with ease. Designed for easy…

Anal Dildo Sex Toy for Adult 14cm Anal plug

Food / Freezer Bag Clip - 9cm (90mm) and 14cm (140mm)

This is a super handy clip for the pantry, freezer and just other bags. We use them for chip bags, and freezer stuff. I print them using PLA+, and we have clips that we are still using that have lasted 6/7/8 years in the freezer. And are…

Cat Food Storage for wet food pouches, 9x14cm e.g. Whiskas

Cat Food Dispenser for Wet Food Pouches Overview Designed for wet food pouches (~9x14cm) Two sizes: Tight fit and loose fit Features Can be printed without support Compatible with popular wet food brands (e.g. Whiskas) Printing Suitable…

Circle Cookie Cutter STL File Set – 4cm to 10cm Sizes

🟢 Circle Cookie Cutter STL File Set – 4cm to 10cm Sizes Make perfect circles every time! This downloadable set includes 7 sizes of circular cookie cutters, ranging from 4cm to 10cm, designed for clean cuts and long-lasting performance. 📦…

Mini Modular Drawers 4cm

I searched for storage box on Thingiverse. I find O3D great design the Modular Drawers 2.0 but its too big for my small things (M2,M3 screws nuts, bullet connector etc.) Because of this i made the smaller version. The drawers knob…

Compact rotating platform project- 14cm wide x 2.5cm tall

Seems every rotating thing on Printables needs a stepper motor and a programming degree so I made something that needs just 2 mr128 bearings and the rest can be found in the junk drawer. Wrap the wires around the built-in battery holder…

Tiny Easter Bunny (1,4cm)

just a tiny bunny:) 1,4cm x 0,7cm smaller than 1 penny.

12/14cm Noctua High-efficiency fan grill remix version 120mm/140mm fanduct

Made some remix,and modify a 14cm version

4cm diam sphere mold no screws candle

MOLD CAN BE PRINTED UPRIGHT OR ON FLAT SIDE WITHOUT SUPPORTS this mold is intended for use with wicks dipped beforehand but not required tested with PLA at 3 shells / 10% infill at 150% scale (6cm diameter) there was some leakage due to…

Gnome napkin stand REMIX 4cm width / Zwerg Wichtel Kobold Serviettenständer

my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.16 - 0.2 Walls: 2 Infill: 5% Material: Brand: GraKit Material: PLA Color: Tri-Color Black/Gold/Red printed on Creality Ender 7

Garden Label 6x4cm - single stake

Measures 10.7cm tall and has a thickness of 0.8mm

Gingerbread House Cookie Cutter 16cm x 17cm x 14cm/Perníková Chaloupka Vykrajovátko 16cm x 17,5cm x 14cm

ENG version : Gingerbread House Cookie Cutter as collection 16x17x14cm is not only for X-mas. All models are in 3mf for MK3S+, MINI+ and STL for other FDM. Collection : Front side, Back side, Roof, Side, Floor, Big&Small Window Material :…

Tall Phone Stand (14cm)

NO SUPPORTS NEEDED! Everything is angled nicely, and gaps are short enough that supports aren't needed. I recommend printing on the Y axis (see last image), for stability. Example printed with PLA+ on an Ender 3 V2 Neo, print time was…

Weaving Shuttle (24cm x 2.5cm)

This is a simple weaving shuttle I made for my girlfriend. It's easy to print in PLA. I printed it with 100% infill just to be sure but I don't think it's necessary. I also made a Backstrap Weaving Loom , have a look!

PVC pipe cross joint 4cm diameter

A quick pvc pipe cross joint with a 90 degree angle to joint 4cm diameter pvc pipes.

Premium Square Cookie Cutter STL Set (4cm to 10cm)

Make perfectly sized cookies, toppers, or crafts with this free multi-size square cookie cutter STL set , designed for clean cuts and everyday use. 📦 What's Included: 7 STL files: 4cm, 5cm, 6cm, 7cm, 8cm, 9cm, 10cm square cutters No…

IKEA dupe tablet/book holder 24cm

Is nice to have in the kitchen, when you have to look at recipes. Inspiration from the IKEA book/tablet stand. Same measurement. Can also be used on nightstand etc. when watching series or scrolling on your tablet. Designed to be printed…

Hexagonal Self Watering Planter (16x16x14cm)

Based on the rough working principle of the most popular self watering planters on this website. Walls are thick enough so no leaks occur (tested this myself, sadly I no longer have access to the final prints) Theoretically it's possible…

Premium Arch Cookie Cutter STL Set (4cm to 10cm)

Add a modern touch to your bakes and crafts with this free arch cookie cutter STL set , featuring 7 sizes for total versatility. 📦 What's Included: 7 STL files: 4cm, 5cm, 6cm, 7cm, 8cm, 9cm, 10cm arch-shaped cutters Prints flat with no…

pokemon monster ball 4CM

you can put nfc card in this pokeball or any you can....

Lightbox Back To The Future Big Led Lamp 54cm Gamer

large version that needs to be printed in several parts. The parts need to be glued together in the end. For smaller printers, parts may need to be cut. Happy printing

PERNO + ARANDELA 4CM*3MM

Perno............4cm*3mm arandela........0.5; 1.0; 1.5; 2.0; 2.5; 3.0

Porsche Quartet: 74cm Elegance

Made it to a 4 piece so it can be much larger. Added a picture before the assembly with the Kingston usb for size.

Inneneinrichtung für Märklin 4064 Schlafwagen (24cm / H0)

Dies ist eine Inneneinrichtung für den Märklin Schlafwagen 4064

Air purifier (for xaiomi filters from their purifiers) with 14cm fan

fan (140mm, better some speedy fan, 1800-3000rpm at top speed) is mounted to top part, then bottom part (coupling for air purifier filter) is screwed to fan base.

Movable eyelid for 4cm Ping Pong Ball

I build hand-puppets and made these type of movable eyelids by hand in the past. This is my first working model for simple eyelids. They fit exactly over a 4cm Ping Pong Ball. Category: Robotics

4cm Bias Tape Maker

This is a remix of bias tape maker from https://www.thingiverse.com/thing:3880491 by Oscarko for 4cm tape Category: 3D Printing

Binding tool for sewing 4cm

Print it standing on one of the open ends. No supports needed, but a brim is recommended. When using the tool, cut a 4 cm wide strip of fabric with a narrower tip. Feed it in from the flatter side and feed it through with the tip of your…

Darkroom Paper Safe 7x9.5"/18x24cm

This is a PaperSafe box for printing in darkroom. It is resistant to bright light and gives quick access to photo paper without having to constantly open and close the paper package. The size is adjusted for printing on a Bamboo Lab P1S…

drainage hole screen 4x4cm

This small screen will cover your pots drainage hole(s). It holds the soil back, whilst water and air go through easily

Simple Ruler - Metric (14cm)

As there seems to be some sort of ghost in my office who steals my rulers, I always need a ruler, but never have one. So heres a quick print for a 14cm Ruler (15cm total) which prints in 16 mins. Ideally you want to print the numbers in a…

shrimp tunnel shrimptunnel 14cm

it's a shrimp tunnel that you can put in your aquarium soil so the shrimps can hide and explore while you can still see then trough the glass

Ikea Samla wall holder 14cm

The way you can store your filaments in the Ikea Samla boxes is great. But then you need an cupboard to place all your Samla boxes in. And I did not want that. So I created two holders that combined can hold a full Samla box. I have…

14cm Alhambra Rosetta Arabesque Lamp

A smaller redraw of the 20cm version https://www.printables.com/model/628369-al-hambra-alhambra-rosetta-arabesque-lamp-20cm Preferably print with a brim, no supports needed, for best result, at least 3 walls

12cm PC fan to 14cm PC bracket adapter

Shamelessly remade from pictures of a Noctua product that does the same thing. An adapter to mount a 12cm fan to a 14cm fan location. Print instructions Nothing special. Any type of filament and settings will do the trick.

Garden Label 6x4cm - twin stake

Not only one prong, but two for billboard-style labeling ; ) Measures 10cm tall and has a thickness of 0.8mm

Heart shaped pendant - 4cm, scalable

This is a heart shaped pendant or keychain. Its width is 4cm and its height is 1cm. It prints easily when you use supports.

Subwoofer Speaker Leg Replacement 4cm

Designed to fit a Jensen CS10 Powered Bookshelf Subwoofer cabinet, but easily scaled to fit other audio equipment. The original rubber leg had a steel washer to make the screw hole rigid, but I've been able to skip that piece. The screw…

IKEA Vörda 6in 14cm knife sheath

Very nice and light sheath by @MatthewGTaylor , rescaled to fit the 14cm/6in version of the knife. I like to take this knife with me for cooking on my travels, so a sheath is a must. This is my first remix: please let me know in comments…

24cm x 24cm Nanoblock base [6 x 6 bases]

Slice and print! This will come out at 240mm x 240mm so make sure your printer can handle that size! on my K1 Max its a treat! These are perfect for building scenes with your nanoblocks as you can see from the pics! Big <3 to the original…

Metric Whiteboard Set Square (24cm / 30cm)

Intended to stick some flat magnets on the bottom to put it on a whiteboard, but also usable on paper. I only printed the 24cm version because it is big enough for me. Would be nice to see the 30cm in reality so I'd be happy if someone…

14cm Schiessscheibenhalter auf 160mm KG Rohr für Luftgewehr

Der Scheibenhalter bietet Platz für 14cm x 14cm Zielscheiben. Alternativ kann seitlich eine M6 Gewindestangen zum tragen von Silhouetten eingesetzt werden. Das Modell besteht aus mehreren Objekten, die mit Prusa Slicer getrennt und auf…

PC Case Fan cover 5.25" for 14cm fans

Fan holder to put in four 5.25 slots in the front of old PC case to create an airflow You probably should add a mesh between the main part and the ring to protect the fan from inquisitive fingers (I used superglue to put everything…

Box divider for IKEA Samla (39x28x14cm)

Print two of these, print two more mirrored. Plop them down into a IKEA samla, the one that is 39x28x14cm (Article number 401.029.78). They will neatly divide the space into 8 compartments.…

PCB Holder 4cm x 6cm

I created some amplifier circuits for my virtual pinball project: http://lilmikey.com/2017/02/16/virtual-pinball-cabinet/ I build them on small, cheap uxcell 4x6cm perf boards:…

Rampe für Staubsaugroboter (18cm x 2,4cm x 21,6cm)

Material sparende Rampe für die Türschwelle

Drum sticks holder NUX DM7/7X/8 or tubes D40-44cm

Drum sticks holder 2pcs. No support print. For frame tubes 40-44cm in diameter. I use it with my NUX DM-7X, I'm sure it'll work with DM-7 and DM-8 as well. For other drumsets measure your frame tube diameter first.

Small Square Tool 3cm x 4cm with silver ratio

I printed with PLA, 0.2mm height and 25% gyroid infill. If you want more precise square you could do some precise sanding. Holes B-D form silver ratio Θ*10mm=~24.14 A-B is Θ/2 The silver ratio is Θ = 2.414213… = 1 + sqrt(2) It derives…

Mini Pocket Slide Box (10cm | 11cm | 13cm | 14cm) - H1.5cm-H3cm

Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.

TV Riser Feet Stand 4cm

TV riser feet to prevent the soundbar from blocking the screen.

Battery organizer for AA and AAA - 24cm x 5cm

An organizer for both AA and AAA batteries Dimensions 24 cm x 5 cm

Inneneinrichtung für Märklin 4024 Speisewagen (24cm / H0)

Dies ist eine Inneneinrichtung für den Märklin Schlafwagen 4024

Ninja Luxe Cup Tray Protector and cup riser 1.4cm

Ich habe eine kurze Anpassung gemacht und den Sockel um 1.4cm erhöht, so steht die Tasse näher an dem Siebträger. I made a small adjustment and raised the base by 1.4 cm, so the cup sits closer to the portafilter.

Razer Core X Chroma 14cm fan adapter

Razer Core X Chroma 14cm fan adapter silent mod you will need some longer screws

Low Poly Squirtle - PETG - 4cm - Multi color

This is a 4 hour print with a lot of waste. If I had to do it again I would cut it in half vertically and print the front side and back side separately and then glue it together to save filament.

Kugelfangeinsatz 14x14cm Streichhölzer

Ein einfacher, schnell druckbarer Einsatz für jeden Kugelfang mit 14x14cm Zielscheiben damit man auf Streichhölzer oder Zahnstocher schießen kann. Der Abstand zwischen den Streichhölzern / Zahnstochern beträgt 10mm, sollte Bedarf an mehr…

Bordsteinrampe - Rampe 4cm - curb ramp - door ramp

Ramp with wave pattern for more grip - 4cm high Printed with NO Supports in PETG Size: 30x20x4cm Furthermore, I added 4mm holes to connect multiple lamps together with screws.

Jaws for 2 axis woodturning (3cm, 4cm and 5cm diameter)

I try to make little wooden spoons You first have to turn something akin to a babies rattle and then mount that ball on a different axis . I found Alan Strattons design (…

Screwless sparingly Ikea Lack leg extensions in 4cm steps

“foot” is 4cm Ikea Lack leg extension I needed to regain 180mm maximal print height for Prusa MINI+ below Lack table. “foot2” is 4cm additional extension I needed for placing 4cm thick concrete slab between printer and absorber (old gym…

Simple 19inch 1HE rack standoff 4cm

Simple 4cm standoff for 1HE 19Inch rach equipment. Through holes are M6 for M6x60 screws. Printed in PETG with 50% infill for heavier equipment.

Nanoblock Storage Box [fits 24cm x 24cm plate as lid!]

My son who is obsessed with his nanoblocks, has hundreds of spare and left over nanoblocks and where to store them? This original mesh uses the 24cm x 24cm nanoblock base plate I remixed, and uses that as a slide lid for the storage box!…

IKEA STOFMOLN 24cm light enclosure

This enclosure is designed for the IKEA STOFMOLN 24cm led light. For mounting no additional tools is required. The model printed in the example photos used a Bambu Lab P1S printer and their PLA silk copper filament.

Card & Cardboard Cutting Jig 10cm by 14cm (10x14cm - 100mm x 140mm) Precision Template

Card & Cardboard Cutting Jig – 10x14cm Precision Template Description: Easily cut cards and cardboard to a perfect 10cm by 14cm size with this durable cutting jig. Ideal for trading card projects, arts & crafts, and prototyping, this jig…

Prusa MK4 Z-axis mounts for IKEA SKYDRAG/SILVERGLANS light bar 14cm

Replacement (and possibly upgrade to R3 version) Z top-mounts for the Prusa MK4 printer with extensions to mount an IKEA Silverglans/Skydrag 16"/40cm light bar. (Tested with Silverglans; IKEA number 305.286.70). The Skydrag/Silverglans…

Pastry ring 8cm X H4cm

For restaurant-style service, use this Pastry Ring to assemble your side dishes and starters. This Ø 8 cm x H 4 cm Pastry Ring is sturdy and practical. PLA + Unsupported Layer height 0.2mm Thickness of bottom top: 0.8 Filling : 30…

4cm section insert with 8 x 5mm holes for ICT Avatar toolstand

Useful for holding 8 x Wera screwdrivers and Wiha hex drivers. The same part can be used for the top and bottom insert. The holes are 5mm diameter. Inspired by this model but I found the top holes too big and the bottom holes too small…

Rectangular Selfwatering Plant Pot with Floaty and Fuzzy skin 14cm

Check the description in the the original post for 10cm version. I have printed only 10cm model so far, they are on the photos. Pls comment if anything is wrong

Number Puzzle - 14cm square board (numbers 1-4)

Learning resource 14cm square number puzzle challenge using big scale numbers from 1 to 4. Printing: The model is split into two .stl files for easy printing in multiple colors. Add a pause in the G-code to change the color between the…

🛄 14cm hanger for tool hole wall

Info: simple 14cm hanger for metallic hole wall (1cm square holes) 40/50%+ infill, 3 perimeters I have used PLA (so it is not that flexible) no supports

Movable eyelid for 4cm Ping Pong Ball - version3

I made this model to build animatronic eyelids for puppets or robots. This version of the eyelid makes it easier to attach a bowden cabel. Instructions Can be printed without support. Category: Robotics

14cm Target Air Rifle / Airsoft

14cm Target Air Rifle / Airsoft To use the last of the spools minimal filament and very fast prints

Horizontal Lamp for 4cm socket

Horizontal Lamp Designed for red light therapy lamp MITO LIGHT Bulb 3.0 ( https://www.mitolight.cz/mito-light-bulb-3-0/ ). can be used for any bulb with a 4cm socket. You can support me with Bitcoin or Lightning network HERE or normal…

4cm Riser for Next Level Racing LITE Monitor Stand

Print 4x for a complete set

MOZA R12 14cm Cooler case

Basic mount for the 14mm fan to cool down a little the Moza R12 base. I printed it with PETG as it needs to bend a little. Connect the fan and the bottom part with screws. Put on the cover. Then just connect it wit a base using screw…

Bed mini table for Phone or glasses. Compatible with 4cm bedboard

It is a small table that you can attach to the bedboard. It is compatible with 4cm thick board. Compatible with IKEA beds

Door coat hook 2cm 4cm

Door hook for doors with a thickness of 2 cm and 4 cm. I used PETG and ABS. If you're using ABS, the printer should be in a box. Otherwise the material might bend during the print. Print Settings Printer Brand: ELEGOO Printer: ELEGOO…

Family, where life begins... 14x14cm

In the print profile there is the ENGLISH version, but the text and the colors are easily editable in BambuStudio (or with other software) so you can customize it. 14cm x 14cm, no support required

Fan Adaptor from 4cm to 6 cm

This is used to adapt a layer cooler on the prusa i2 for enabling it to use 6cm fan. Print instructions Category: 3D Printer Parts Summary This is used to adapt a layer cooler on the prusa i2 for enabling it to use 6cm fan. Instructions…

Schulte Shelf Foot (4cm version)

Foot for Schulte scewed shelfs.

Qidi Plus 4 Feet 4cm

Druckparameter: 0,24 Schichthöhe 6 Wände Obere Schale 6, untere Schale 4 Gyroid 20%

AM bait fish 14cm hoof model / form for predator fishing

Please like before downloading the model . Thank you so much for your support ✌ Follow me on Instagram @artmancults for more models, prints and updates: https://www.instagram.com/artmancults/ bait model and bait form for fishing for…

Cooling Fan/Shroud with 4cm Blower and Sensor for Wanhao D6/Ultimate

This shroud is printed in two parts that slide together. Included is a M12x1mm nut for the proximity sensor. You also need to print two of the 5x6mm posts and remove a small bridge between the holding posts for the fan on the shroud. I…

Bonsai - Trainingpot with 24cm diameter

The pot is stable enouch to carry a massive rock about 5kg. The pot allows plenty of oxygen to reach the roots and it is possible to stretch wire over the surrounding eyelets. The pot has a diameter about 24cm and a heigh of 6cm. The pot…

Halter für iPad 17cm x 24cm x 0,7cm

iPad Halterung für Unterschrankmontage Für iPad mit den Maßen 170mm x 240mm x 7mm Benötigt werden: 4 Stück M3x12 Senkkopfschrauben + 4 Muttern (Montage) 2 Stück M4x30 Spax (Befestigung)

VESA Extended 4cm

Extended the holes 4 cm to clear an HDMI or DisplayPort cord that comes out of the back of most monitors.

Pizza Stone Wall Mount 24cm - 35cm

Pizza Stone Wall Mount Diameters (inner) 24cm - 35cm Height (inner) 2.5cm - 5.5cm I printed it with PLA; 4 walls and 30% infill. This ought to be enough to prevent creep from the weight of the stone. Each part can be mounted with 3 screws…

Airbrush Turntable 24cm

This is my own created turntable for airbrush or whatever u might need it for. It uses 6mm airsoft bbs to roll on or any other 6mm balls. It is a small compartment between top and bottom if u want to make it heavier. It is easy to move…

Case for 24 mini 4cm-square books

The kids got 24 small booklets in their advent calendar and to keep them all together they needed a case. It is very simple design with two inside walls to keep the books tidy. I found it quicker to design it myself rather than search for…

Ikea stoftmoln 24cm roof plate

The Ikea Stoftmoln 24cm ledlight do not have any room between the roof outlet and the lamp so i created an octagon that gives 40 mm space to be able to house the powerconnector. Screws used to fixate to roof was 4 x 55mm. The Octagon uses…

Naval Gun-Like Watering Can「試製14cm単装散水砲」

A watering can based on the 14 cm/50 3rd Year Type naval gun. It holds 2L of water and is easy to use! I am not a military model hobbyist, and this model may not be historically or technically accurate. I referenced several pictures of…

Ikea lack table stack adapter fitting 4cm leg extension

I use @Strankler's adapter to stack two Ikea lack tables: https://www.printables.com/model/11146-ikea-lack-stack-adapter But I use my own 4cm leg extensions with 3rd lack desk (for getting full Prusa MINI+ 18cm print height with Lack…

Small Junction Box with Dual M16 / PG16 Cable Ports (8x4cm, Ruthex M3 Inserts)

A compact 8x4cm junction box designed specifically for low-voltage wiring connections, cable extensions, and transition splices between different cable types. Featuring dual M16 threaded ports on opposing sides, it allows you to secure…

14cm wide x 14cm long x 23cm high Wavy Tensegrity Table

Lesson Plan and Activity: With a partner, design and create a single custom Tensegrity Structure of equal complexity or greater as the tables depicted above. Parts List: 2 connector pieces, 1 bottom base piece, 1 top base piece 10 small…

14cm Annular Weed fin for speed sailing

This is similar to previous weed fin but instead of the airfoil increasing around the diameter this fin decreases chord length. Also add bulbs on tips to reduce tip turbulence. Annular fins generate more lift for less draft so in theory…

Forböttra 2cm/4cm

I changed the height on one side to 4cm because I cut off the Forböttra weirdly

Tappo Copri Foro Muro Caldaia diametro interno 12cm / esterno 14cm

Tappo Copri Foro Muro Caldaia diametro interno 12cm / esterno 14cm

Poop Bin Stone edging slab 40x40x4cm with Anycubic logo and Nametag

ENG To match my 40x40x4cm stone border, I designed a poop container. It features the Anycubic logo and my name. These can be removed in the slicer if you like. Please note the raised feet on my Kobra 3. They are 10mm higher! Enjoy! DEU…