Wyniki wyszukiwania: 4x4

Sortowanie

622 modeli

P
Printables3D Sets

Model 1: Rancher 4x4

Rancher 4×4 – 3d printable set of parts for your 3d printer. Model is approx. 53 cm long (1:8 scale) and is prepared for your RC equipment. You can buy this model on www.3dsets.com What you get: 3d printing files: .stl and .gcode…

Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu

Pobrania
1815
Polubienia
657
Ocena
5
P
PrintablesCtihy

Karak / Carcassonne 4x4 tiles grid / mřížka

U původní mřížky byly zámky na můj vkus až příliš volné, upravil jsem tedy přesnost zámků, těsnost políček pro dlaždice a trochu snížil výšku oddělujících křížků. Díky moc za původní model, který jsem jen lehce dotvořil ke své…

Wydruk około 1,48 €–1,80 € nettoWstępna wycena jednego wariantu

Pobrania
799
Polubienia
79
Ocena
4,9
P
PrintablesAKIINT

Maze 54x44 square cells, center start

I present to you a 54x44 square cells, orthogonal maze. You have to start from center and the exit is at the bottom. The maze is a little bit hard to solve, but the time to solve it is worth it. The total maze size is 240x200x11mm. There…

Wydruk około 6,63 €–8,11 € nettoWstępna wycena jednego wariantu

Pobrania
401
Polubienia
127
Ocena
5
P
Printables3D Sets

BeltDrive 4x4 Brushless Cooling Fan

Optional fan enhance the cooling of the brushless motor compartment. Just slide-in the fan into the motor shaft.

Wydruk około 0,18 €–0,23 € nettoWstępna wycena jednego wariantu

Pobrania
388
Polubienia
54
Ocena
5
P
Printablespstimpel

Servo arm for Rancher 4x4, radio controlled, STLs by 3dsets.com

This file is a more rigid servo arm for the Rancher. The Rancher itself is NOT part of this assembly! If you want to print the Rancher, you will need files from third party as well. Files can be found at 3dsets.com. The Rancher has 4x4…

Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu

Pobrania
294
Polubienia
22
Ocena
5
P
PrintablesLukáš Foukal

Snowplow for 3dsets Landy 4x4 with height adjust

This print is a continuation of my design from last year . The actual plow is reusable from one to the other, I just fixed a minor issue where it was accidentally slightly angled up on the right side and added the height adjustable…

Wydruk około 2,27 €–2,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
240
Polubienia
47
Ocena
5
P
PrintablesKeldor

Gridfinity 4x4x6 HexBin

A single Hex bin with 4 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Requested by @CG485_1311834 Look at my other HexBin's here:…

Wydruk około 6,35 €–7,76 € nettoWstępna wycena jednego wariantu

Pobrania
218
Polubienia
53
Ocena
0
P
Printables3D Sets

BeltDrive 4x4 - 3536 size brushless motor

To print this part, use the same settings as for the original BeltDrive parts. For hot weather use print from heat resistant material (PET-G, etc.).

Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu

Pobrania
191
Polubienia
35
Ocena
5
P
Printablesmarkco

Fence Post 4x4 Topper Forth Try - Body Thickness .8mm

So far happy with the looks and takes about 55mins on the mk4 @ .2mm Speed setting. Not sure how the color will hold up but thinking that I can paint them if the sun bleaches them too much.

Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu

Pobrania
89
Polubienia
18
Ocena
0
P
Printables3DP-MAMSIH

Wheel Base Rancher 4x4 Beadlock

Some tweaking for the rim on add slot to have more grip inside the tire and make it bigger than the original for about 3mm so can get more tight i use the 1.9/107mm inch tires Hope this help Big Thanks for the 3d sets

Wydruk około 4,61 €–5,64 € nettoWstępna wycena jednego wariantu

Pobrania
85
Polubienia
24
Ocena
0
P
PrintablesL7899

Mopar 55156555AE, Jeep XJ/ZJ/WJ 1997-2004 "4x4" Emblem

Mopar 55156555AE, Jeep XJ/ZJ/WJ 1997-2004 "4x4" Emblem Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about the exact dimensions, but…

Wydruk około 0,34 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
74
Polubienia
10
Ocena
0
P
PrintablesSilverBullet126

Hobbywing Max10 SCT Mount for Traxxas Stampede 4x4

A mounting solution for the Hobbywing Max10 SCT in a Traxxas Stampede 4x4 with the stock chassis. This design has 3 parts; a base plate, a step (to keep things level) and then a holder that keeps the ESC and switch in place. 2 x M3 6mm…

Wydruk około 2,04 €–2,49 € nettoWstępna wycena jednego wariantu

Pobrania
73
Polubienia
4
Ocena
5
P
PrintablesAKIINT

Maze 54x44 square cells

I present to you a 54x44 square cells, orthogonal maze. The entrance is at the top and the exit is at the bottom. The maze is a little bit hard to solve, but the time to solve it is worth it. The total maze size is 240x200x11mm. There is…

Wydruk około 6,63 €–8,11 € nettoWstępna wycena jednego wariantu

Pobrania
49
Polubienia
4
Ocena
0
P
PrintablesNicke80

SkyRC GSM020 Mount for Traxxas Stampede BL-2s and Hoss 4x4

I designed this mount for the SkyRC GSM020 Performance Analyzer to fit the BL-2s Stampede right on the top of the steering servo. It may also work with the Traxxas Hoss 4x4 since they share the same chassis, TRX9022. This mod is non…

Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu

Pobrania
32
Polubienia
5
Ocena
0
P
PrintablesCtihy

Karak (Kosmos version) 4x4 tiles grid / mřížka

4x4 tiles grid for insert to Karak - Kosmos version. Adjusted the lock sizes to reduce the overall dimensions and make the grille fit into the insert for the Kosmos version. Holder for up to 16 of these grids here:…

Wydruk około 1,50 €–1,84 € nettoWstępna wycena jednego wariantu

Pobrania
18
Polubienia
3
Ocena
0
P
PrintablesHector

Nasa chainmail (4x4, 8x8, 12x16 and 32x34)

Note: the coned center section design saves print time (prior design required individual deposition points for 12 tiny dots that often failed, but that are eliminated here) and provides the strength needed to eliminate the vertical links…

Pobrania
67 200
Polubienia
13 122
Ocena
4,86
P
PrintablesCrosslink

IKEA Skadis Wall Panel with standoffs, 6x6, 5x5, 4x4 holes and other sizes

IKEA Skadis compliant wall panel with 6x6, 5x5, 4x4 holes and other sizes. The standoffs are 25mm. The front will be 30mm from the wall. Mounted with 4x screws, ideall sunken head. Print with 10% gyroid infill, 3 top, 3 bottom layers, 3…

Pobrania
3173
Polubienia
843
Ocena
4,67
P
PrintablesRamBros

G-Wagon - 3D printed 4x4 RC car (Chassis)

G wagon - True scale model After months of designing and testing, The design is finally ready. A Performance RC model with offroad capabilities. The chassis has ~150 printed parts. Join our : Discord The body for this Chassis can be…

Pobrania
2514
Polubienia
512
Ocena
3
P
PrintablesMrStolarsky

Offroad 4x4 Recovery Boards

🆕 Available on Etsy, from me, with free shipping These are 1:10 scale recovery boards for RC crawlers and other toys. I really made these for a fridge magnet but folks at Etsy loved it for the detail. I am sure the community here on…

Pobrania
1193
Polubienia
120
Ocena
5
P
PrintablesSMACKMAX_

Garbage Bin - 24x24x45(x) cm

Garbage Bin - 24x24x45 cm Consider following me on Instagram I post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ Fully Printed Waste Bin Tub under needs a bit of support 240 x 240 x 450 mm…

Pobrania
1192
Polubienia
481
Ocena
5
P
Printables8bitmcu

1:16 Truck/Crawler 4x4 RC Chassis

This 3D-printable model draws heavy inspiration from other 1:12 and 1:16 scale models. Every component was designed from the ground up specifically for 3D printing. Not much into RC's? Check out this flexible rolling chassis instead!…

Pobrania
1183
Polubienia
358
Ocena
5
P
PrintablesReset

sliding puzzle 4x4 print in place

Summary sliding puzzle 4x4 print in place there are 3 versions: with 0.15, 0.2 and 0.3mm gap. to make it easier to move the stones, i recommend applying 1 drop of silicone grease to a cotton swab and carefully wetting the sliding points…

Pobrania
1128
Polubienia
170
Ocena
4,8
P
PrintablesSlanjonok

Jet another Vallejo/Citadel-Paint holder, standalone version 4x4

This is an improved version of my previous paint holder, having two advantages: a) can be printed without any support b) vallejo-paint bottles can be stored head down at all positions - this is especially helpful if the bottle gets close…

Pobrania
1098
Polubienia
151
Ocena
5
P
PrintablesRamBros

G-Wagon - 3D printed 4x4 RC car (Body)

G wagon - True scale model After months of designing and testing, The design is finally ready. A Performance RC model with offroad capabilities. Join our : Discord The Chassis for this model can be downloaded here:…

Pobrania
1057
Polubienia
168
Ocena
0
P
Printables29flo

4x4 Off Road Car Model

4x4 Off Road Car Model This time, I'm presenting a 4x4 car model. In my opinion, the best way to print it is in a vertical position. But maybe someone has a different idea. Removing the supports takes a bit of effort, but I think it's…

Pobrania
988
Polubienia
138
Ocena
0
P
PrintablesCWalters

Gridfinity Bins - 4x4 Format

Simple Gridfinity bin. The name of the objects are the dimensions, for x and y and the height. The height is a multiple of 7mm: 2 = 14mm 3 = 21mm 4 = 28mm 6 = 42mm The x and y are multiples of 42mm: 1 = 42mm 2 = 84mm 3 = 126mm 4 = 168mm…

Pobrania
931
Polubienia
76
Ocena
0
P
Printablesstan110

Under Desk Drawer 4x4 Gridfinity

For the rails use the V12 rails from @Paul_318082 https://www.printables.com/model/440401-under-desk-drawer Update 15-5-2023: Update the drawers to V12

Pobrania
832
Polubienia
180
Ocena
4,89
P
Printablesmbe075

6x6 Upgrade for 3D SETS Model 5 (Landy 4x4 Wagon)

○120mm extend to switch from a 4WD to a 6WD See instructions (pdf build guide file)

Pobrania
726
Polubienia
119
Ocena
5
P
PrintablesGabriel

Gridfinity 4x4 Baseplate

Based on the work of ZackFreedman .

Pobrania
711
Polubienia
41
Ocena
5
P
PrintablesLukas Pratz

4x4 Puzzle Cube

This is a 4x4 puzzle cube. It's very hard because the pieces are big and very unique. Piece 2 needs support I made a much harder 4x4 cube wich also doesnt need support. check this model out:…

Pobrania
700
Polubienia
159
Ocena
5
P
PrintablesTycho Design

M4 Screw Collection M4x6-M4x40 ISO 4017 / DIN 933

Collection of screws (ISO 4017 / DIN 933) including : M4x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…

Pobrania
666
Polubienia
65
Ocena
5
P
Printablesshoooo

Gridfinity 4x4 and 4x2 base French cleat mount

Two options for attaching back (cleat) CA glue. Designed with a mating registration surfaces to locate horizontally in the center and to give lots of strength for almost all purposes with just CA glue Hardware, made for ¼ bolts 2 x ¾"…

Pobrania
635
Polubienia
179
Ocena
5
P
Printablest0b1

Cover for 4x4 membrane keypad

Very simple enclosure for a 4×4 membrane keypad. Started as a test-print to check if I have the dimensions right. OpenSCAD files are included. Perhaps you find this useful for your own projects. Print instructions The screw holes are…

Pobrania
599
Polubienia
67
Ocena
5
P
PrintablesBenny

Stand for 3Dsets Jeep Rancher 4x4 & Landy 4x4 (normal and wagon) & Bamboo

Stand for 3Dsets Jeep Rancher 4x4 & Landy 4x4 & Bamboo 10/2/2020 - addes v2 upper part for much more stability 13/2/2020 - added v2 middle and bottom part, can now be screwed together 2/10/2023 - adde middle R-20 part for compatibility…

Pobrania
573
Polubienia
54
Ocena
4,94
P
PrintablesOverengineering

Trophy Truck V4 4x4 main chassis parts

https://youtu.be/aHf-W1n8ITU?si=BQhXFbC39kVWgMhv Check out my profile for the rear axle and all the other parts. -You will need M3 Nuts and Screws in 10, 12, 16, 20, 25, 30 and two in 55mm lenghts. -12x18x4mm bearings. (Just buy 20 or so,…

Pobrania
502
Polubienia
235
Ocena
0
P
Printablessmtk

Battletech stackable miniature storage tray 4x4 XL size

Battletech stackable miniature storage tray 4x4, Stores 16mechs. Trays stack on each other Its stacking compatible with the 5x5 REG tray Fits all mechs if you want more storage density consider the 5x5 REG tray Doesn't stack with Small…

Pobrania
500
Polubienia
50
Ocena
0

Traxxas Rustler 4x2 and 4X4 Paddle Tire and Rim

I just want to say that these really do fling dirt / rocks / gravel behind them in a HUGE arc. These tires are not good if you are around anyone who does not want to get peppered with rocks and dirt. These can easily fling rocks 30 feet…

Pobrania
499
Polubienia
92
Ocena
5
P
PrintablesTycho Design

M4 CSK Socket Head Screw Collection M4x6-M4x40 ISO 10642 / DIN 7991

Collection of screws (ISO 10642 / DIN 7991) including : M4x 6, 8, 10, 12, 16, 20, 22, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…

Pobrania
493
Polubienia
60
Ocena
0
P
PrintablesDoak

Gridfinity 4x4x0.5 Corrugated Tray

A simple 4x4 half height Gridfinity tray with “corrugation” to keep tools separated. This was designed to hold tweezers and other short-ish tools. Tools are separated by a series of ridges. Half height to make for easy stacking.

Pobrania
478
Polubienia
122
Ocena
5

Traxxas 3.00 x 1.925 Rims for Rustler 2x4 and 4x4 Trucks

EDIT 2 Here are the 0.85" wide rims and tire for the front of your 2WD if you want that dune buggy look. EDIT 1 I added rim design 011 through 014. I also slightly modified rim 008 by adding an 0.030" fillet on the top edges. ORIGINAL My…

Pobrania
473
Polubienia
68
Ocena
5
P
PrintablesThéo Lepoutte

One print 8 MicroSD + 3 SD card box (4x4x3cm)

4x4x3cm SD card box with hinge

Pobrania
454
Polubienia
59
Ocena
5

High Clearance Mod for Thumper RC 4X4 Crawler

This mod only works with the [Cheater B540C transmission] included here. [B] is the gear ratio [540] is the motor mount, [C] stands for Clearance. If you are serious about crawling a Thumper model, this transmission and frame setup…

Pobrania
442
Polubienia
71
Ocena
5
P
PrintablesVoltz18

Cube Puzzle 4x4 (Challenging)

A difficult little 4x4 cube puzzle that I myself cant seem to solve even though I'm the creator. Please share if you find the solution.

Pobrania
417
Polubienia
35
Ocena
0
P
Printabless2sP

Gridfinity | Base: Skelet | 4x4 | select2stertPrint

I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…

Pobrania
414
Polubienia
23
Ocena
5
P
PrintablesMyStoopidStuff

4x4 Gridfinity Box For Stuff (BFS) - 16 BIN 6U Version 3.3 - Ender3 Size

This is the updated V3.3 Version of the 16 BIN (4x4) 6U Gridfinity Box for Stuff. This is designed to fit on an Ender3 size bed (the footprint is 196x214mm). This is 16 bin version of the 20 bin Gridfinity Box For Stuff. See the 20 bin…

Pobrania
411
Polubienia
116
Ocena
4,5
P
PrintablesDavid S

4x4 Post Base

Notes: The G-code included below is designed for maximum durability which makes it quite pricy. For a cheaper alternative, you will have to slice it yourself.

Pobrania
398
Polubienia
31
Ocena
4,75
P
Printableskicou

4x4 deck post trim

Refreshing our old deck, floor planks are still in good enough shape but they have shrunk, and 4x4 posts have twisted a bit over time. Adding trim pieces at the bottom of the posts makes them look cleaner. I didn't want a model that…

Pobrania
388
Polubienia
80
Ocena
5
P
PrintablesLukas Pratz

4x4 Puzzle Cube v2

this is my v2 of my 4x4 Puzzle Cube, wich is much harder, because the pieces create only one solution. I added the Burrtools solution file. I scaled the model 200% up to make the pieces bigger

Pobrania
360
Polubienia
49
Ocena
4,67
P
Printablesromcoromcoromco

Jack for 3D Sets Landy 4x4

Jack for 3D Sets Landy 4x4 RC model 1:10 scale

Pobrania
356
Polubienia
81
Ocena
5
P
PrintablesFawakex

Volcano Nozzle Box 4x4

A little box i designed for Volcano and classic E3D nozzles. Split the stl in your slicer before printing if you're using v6, otherwise use separate files for lid and case. Print instructions Category: 3D Printer Accessories Print…

Pobrania
356
Polubienia
26
Ocena
4,5
P
PrintablesDavid C

Gridfinity 1x4x4u Dremel Bit Holder

Disclaimer: Please ignore the bad print quality in both the photos. Bargain basement silk filament kept clogging/partially clogging the nozzle in first print, in second print the parts fan died causing warping, and ironing the surface…

Pobrania
332
Polubienia
59
Ocena
5
P
PrintablesNodus Design

Hinge 40x60 and 24x40

Welcome to another functional design by Nodus 3D . This Heavy-Duty Hinge Set is engineered for maximum strength and smooth operation. Designed precisely in Fusion 360, these hinges feature countersunk holes for a flush, professional…

Pobrania
329
Polubienia
116
Ocena
0
P
PrintablesT1tch

Gridfinity Drawer (4x4)

Overview This is a drawer that adheres to the gridfinity ethos as closely as I could handle: It has a 4x4 grid on the top, in the drawer, and on the bottom, so: They can be fitted to a gridfinity base, or be used as the base The drawer…

Pobrania
325
Polubienia
70
Ocena
5
P
PrintablesMartin

Stand for 3dsets Landy 4x4 Wagon

Stand for 3dsets.com Landy 4x4 Wagon modified upper part for better vehicle balance and better fit slightly wider stand footprint for improved stability Print instructions 0,3 mm layer height, 3 perimeters, 15 % gyroid infill.

Pobrania
324
Polubienia
55
Ocena
4,9
P
PrintablesWHerzog

Gridfinity Baseplate 4x4 for screwing down

This is a baseplate for Gridfinity system to screw it down to a wooden surface using small wood screws. I modified the screw holes with chamfers to allow usage of little countersunk wood screws 2,5x10. It is a remix based on…

Pobrania
309
Polubienia
32
Ocena
5
P
PrintablesFoxprinter

logo dacia duster 4x4

possibilité de l'imprimer en 2 couleur

Pobrania
307
Polubienia
28
Ocena
0
P
Printableslegobrickman

4x4 Crawler Exclusive Edition Set (41999-1)

This is the 4x4 Crawler Exclusive Edition set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the…

Pobrania
305
Polubienia
92
Ocena
0
P
PrintablesСега Сен

Lada Niva 4x4

Lada Niva 4x4

Pobrania
295
Polubienia
19
Ocena
0
P
PrintablesBazzar701

Tiny Toyota 4x4 - Mini Cars Series

Toyota 4x4, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better detail.…

Pobrania
286
Polubienia
48
Ocena
0
P
Printablesmemory_null

Traxxas Slash 4x4 Stand

RC Stand for Traxxas Slash 4x4. Included are both HCG & LCG Chassis Stands. HCG may still need some tweaking. LCG is complete and the bay has room for the Traxxas EZ Peak+ ID Charger. I had previously uploaded this with logos but had to…

Pobrania
286
Polubienia
45
Ocena
5
P
PrintablesWesYarber

4x4 Tabletop Game

The game is played on a 4×4 board. There are 16 unique pieces to play with, each of which is either: tall or short light or dark (or one of two unique colors) circular or cross hollow-top or solid-top Players take turns choosing a piece…

Pobrania
285
Polubienia
68
Ocena
5
P
Printablesbobmakes

Sortimo T-Boxx Bins (up to 4x4) + Solidworks Model

These models are reverse engineers of Sortimo "T-Boxx" bins. I have uploaded individual STLs for 1x1-4x4 boxes, I will probably upload up to 6x6 later, but the standard Prusa size printer can't even print a 4x4. They work well for one-off…

Pobrania
282
Polubienia
45
Ocena
4
P
PrintablesDema_Design

Fiat Panda 4x4 keychain

Keychain of the legendary panda 4x4 car

Pobrania
275
Polubienia
24
Ocena
5
P
PrintablesCaptHowdy

4x4 post cap

just finished working around my parents house repairing an adding to there front porch. we added a hand rail and instead of going out a buying a post cap i used tinkercad to make this. i made them a few different sizes but i used the 50mm…

Pobrania
275
Polubienia
32
Ocena
5
P
Printablesjanek

4x4 customizable Carcassonne tile grid

In the Carcassone is a game requiring players to build a custom map by laying tiles one next to another. This grid helps keeping the map in case of any "accident" - perfect for playing with children. The model is fully customizable (with…

Pobrania
275
Polubienia
26
Ocena
5
P
PrintablesMyStoopidStuff

Gridfinity 4x4 and 4x5 (6U and 12U) Lidded Bin for Stuff with Latch Version 2.2

These are the latest version (v 2.2) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…

Pobrania
262
Polubienia
38
Ocena
5
P
PrintablesNiko.hogh

Traxxas Slash 4x4 LCG XL battery hold down

This is an extended battery mounting bracket, for the Traxxas Slash 4x4 LCG chassis. I designed it to work with my Turnigy Rapid 5500 mah 4S LiPo battery (as you can see in the pictures) Be aware that for this to fit the aforementioned…

Pobrania
251
Polubienia
25
Ocena
0
P
PrintablesMartin

3dsets Landy 4x4 front wheelhouses with holes for LED lights

3dsets.com Landy 4x4 and Landy 4x4 Wagon modification for LED lights Wheelhouses - modified original mesh, added 24mm holes for lights Rings - to be used instead of default printed lights, push the LED light into it Print instructions…

Pobrania
250
Polubienia
34
Ocena
5
P
PrintablesK2_Kevin

Hex Bin Gridfinity 1x4x4

Hex Bin Gridfinity 1x4

Pobrania
249
Polubienia
37
Ocena
4,5
P
Printablessburggsx

Gridfinity 4x4 3 height Plain Bin

This is a plain gridfinity bin that is 4x4 and 3 high to hold a CD/DVD drive with a USB cable off the center of it. This was created in onShape, I am just posting it here for simplicity.

Pobrania
244
Polubienia
13
Ocena
0
P
PrintablesNordicWalker

Gridfinity 2x4x4U Deburring Tool Case ( only 6x2 magnets )

I have made a simple case for my deburring tool that fits with the gridfinity system. I designed this so that it only uses the standard 6x2 magnets. the magnets are not the strongest but they hold on tight enough. The magnets need to be…

Pobrania
233
Polubienia
56
Ocena
5
P
Printablesbuttsisfun

Traxxas Slash 4x4 Drift Wheel

I tried ESylin's drift wheel ( https://www.thingiverse.com/thing:1334558 ) and they worked great, just wanted some that are a closer diameter to the stock tires so I drew these up. This design is for use with 12mm hexes, which the Slash…

Pobrania
232
Polubienia
33
Ocena
1
P
PrintablesNygaard Design

Gridfinity Spade Drill Bit Organizer 4x4x5

Gridfinity organizer for Spade Drill Bits Check out my other gridfinity creations: https://www.printables.com/@NygaardDesign/collections/1741703

Pobrania
231
Polubienia
42
Ocena
4
P
PrintablesApolloniusFink

Duplo / Hubelino compatible pillar (4x4, 8 high)

A DUPLO compatible pillar 8 bricks high and 4x4 wide. Visual appearance inspired by a “Ground support” or “Truss tower” from Event / PA technology. Pillars come in handy to easily achieve certain heights. Especially when building a DUPLO…

Pobrania
230
Polubienia
20
Ocena
4,67
P
PrintablesMuchOlderToday

4X4 and Light Knob Lock for Chevy Colorado/GMC Canyon (v2)

These objects were fitted on a 2022 Chevy Colorado. They should fit all “Generation 2” 4x4 Colorado and GMC Canyon trucks. There are two versions: Note that the 4x4 Knob Lock object is different in each version and NOT interchangeable.…

Pobrania
226
Polubienia
32
Ocena
5
P
Printablesdemmerichs

Gridfinity Ikea 365+ lid container / holder / kitchen organizer / 4x4 version

For more information please refer to the original printable. Onshape modification studio:…

Pobrania
225
Polubienia
51
Ocena
0
P
PrintablesBarthy

LEGO Compatible Stand 4x4

Printed with a pause at layer 46, to fill it with some small-grained rice. Choose an infill pattern that allows you to fill it up top-to-bottom, like triangles. Print the two parts separately. You probably don't need supports for the…

Pobrania
216
Polubienia
46
Ocena
5
P
Printables_KaszpiR_

Gridfinity 1x1 Lego 4x4

Notes: Two sets one next to another can not be bridged with single LEGO brick. This is because LEGO is 8mm between centers of the connectors, while Gridfinity is in general multiples of 7mm. So I guess 4x1 gridfinity could work (not…

Pobrania
213
Polubienia
45
Ocena
4,75
P
Printableswolffman

3DSets Landy 4x4 Wagon Switch board for QuicRun WP10BL30

can be printed without supports in PLA and be connected on the pins with glue

Pobrania
209
Polubienia
36
Ocena
5
P
Printables3DPeter

4x4x4 Puzzle Cube with 8 identical pieces

A simple and elegant puzzle for a little brain-teasing. The part orientations are ready to print and you can choose one of three stand designs. Normal difficulty. Printing instructions: No supports required. Layer height: 0.2mm

Pobrania
205
Polubienia
41
Ocena
5
P
PrintablesAyp1120

Tinkercad - Make your own 4x4 Sliding Puzzle!

This is a simple guide to make your own 4x4 sliding puzzle - whether it is a map or not - using Tinkercad, thanks to the model @Nikolaos Babetas uploaded of the puzzle itself without any image on top of it. The aim of this remix is to…

Pobrania
196
Polubienia
17
Ocena
5
P
PrintablesMr.Red

4x4 Wire pulling guide

Place over 4x4 box and pull wire through. Prevents damage to the insulation from scraping on the edge of the box.

Pobrania
194
Polubienia
12
Ocena
0
P
PrintablesLelleB

Traxxas Slash 4x4 LCG ESC mount plate

Simple print to get a flat surface for the ESC in TRX-7422 LCG chassis. Uses same holes in chassis as Traxxas original ESC. I made it 3mm thick, cut it in your slicer depending on how thick you want it. Print Settings Printer Brand:…

Pobrania
190
Polubienia
15
Ocena
0
P
PrintablesCoMaz

Rear Driveshaft for Traxxas Slash 4x4

I printed it in Nylon (Taulmann 645) and it works pretty well.

Pobrania
188
Polubienia
41
Ocena
0

4X4 Post Cap

I designed this to cap off the 4x4 posts that were used to build a bench as a gift for my mother. The pictures on this model are custom ones with her initials but the files I have included are slightly different. If you would like some…

Pobrania
187
Polubienia
32
Ocena
0
P
PrintablesJoachim

4x4 Matrix Keypad Enclosure

Small enclosure for the 4x4 Matrix Keypad. The case is 78 mm wide and 77 mm long. The total height of the case is 21.5 mm where the bottom is 20 mm. Hole for wires at the bottom, being 10 x 20 mm. Lid is snap fit, so you it can be a bit…

Pobrania
187
Polubienia
8
Ocena
0
P
PrintablesRushy_Rush

4x4 Fence & Deck Post Caps (3.5" Nominal)

Fence Post Cap Designed to fit a 4x4 post with a 3.5" x 3.5" nominal size. Secures with 2 screws 6x6 Version Can Be Found Here ⚠ Wood swells and shrinks inconsistently. Please measure your post first and compare it with the measure tool,…

Pobrania
183
Polubienia
19
Ocena
0
P
Printablessrirachachacha

Gridfinity Stackable Baseplate with Handle (4x4)

UPDATE: I created a new and improved version of this model that nests and allows for multi-stacking. It's better than this one in every way - I recommend using it instead. Link to updated version:…

Pobrania
183
Polubienia
45
Ocena
0
P
PrintablesIchbins0910

Lego compatible 4x4 plate

It is a 4x4 plate which is compatible with your normal Lego.

Pobrania
182
Polubienia
5
Ocena
0
P
PrintablesLukáš Foukal

Snowplow for 3dsets Landy 4x4 (old)

This model is now depreciated, please use the new one . Are you tired of clearing your driveway by hand? Is it too small to justify a snowblower or other full scale device? Well now, it can take you twice as long, using your RC. This…

Pobrania
181
Polubienia
37
Ocena
0
P

LEGO Ukraine defense industry 4x4 HORT

LEGO Ukraine defense industry 4x4 armoured vehicle HORT

Pobrania
179
Polubienia
39
Ocena
0
P
Printablesmechanicmen

M24x45 Bolt - Nut

Thread faces of the bolt have been reduced by 0.16mm in diameter. So they can freely turn.

Pobrania
179
Polubienia
8
Ocena
0
P
PrintablesBenny

3Dsets Landy 4x4 light cover

New light + cover. You print the cover from transparent filament. I used Nebula natural. Spectrum alu silk was used for the light

Pobrania
174
Polubienia
43
Ocena
5
P
PrintablesZedic

KEY for Bigfoot Monster Truck Playskool 4X4X4 SST (Super Size Truck)

Key for Playskool BIGFOOT 4X4X4 SST Monster Truck I got a Bigfoot for Christmas in 1984! Like most kids I lost the key. :-( So I made new ones. :-) Now you can make your own. The PNG decal file is also included below in a zip file. I just…

Pobrania
172
Polubienia
9
Ocena
0
P
Printablestyler

Fence Post Cap for 4x4

I had one of my fence post caps go missing, and I wanted one that would match my others (at least in size and shape) so this is what I came up with. It almost exactly matches the cheap wooden fence post caps that I got at Home Depot. If…

Pobrania
172
Polubienia
30
Ocena
0
P
PrintablesOverengineering

1/5 scale RC Chassis 4x4 with belt drive

Update 16.5.2026: new front shock mount, upper control arms and added belt tensioner All parts can be printed in PLA. I recommend printing the small 12T motor gear in PC, as it might melt in PLA when the motor gets warm. I never managed…

Pobrania
170
Polubienia
43
Ocena
0
P
Printableslatriple C

Cajonera de almacenamiento apilable 4x4 / Stackable storage drawer 4x4

Cajonera de almacenamiento apilable 4x4 / Stackable storage drawer 4x4 Medidas cajón: 74x51x34,50mm Medidas cajonera: 69x222x154mm Category: Organization

Pobrania
169
Polubienia
15
Ocena
0

Arduino panel for 16x2 display and 4x4 keypad

This is operator panel i designed to my custom control system and already used it in few projects. You can use i2c expanders to make it ultra easy to hook up with only 4 wires. Keep in mind that you have to solder keypad expander exactly…

Pobrania
168
Polubienia
16
Ocena
0
P
PrintablesDruk3D.JS

4x4 Stackable Citadel Paint Bottle Organizer

Slightly smaller version for smaller print volumes.

Pobrania
164
Polubienia
14
Ocena
5
P
Printablesmacsddau

Gridfinity base plate (1x1 to 4x4) with notches & Joiner

Edit. 20250307 Added base form 1x1 to 4x4 and joiner. (original files replaced).

Pobrania
162
Polubienia
10
Ocena
5