2067 modeli
+++ Update from 06.06.2022: added the “tight fit” version “Spool_adapter_72mm_to_52mm_tight_fit.stl” (scaled to 101.5% - thanks at SquasherJoe!) for the really tight fit to 72mm Spool. Please check this version and write feedback in…
Wydruk około 2,32 €–2,84 € nettoWstępna wycena jednego wariantu
This is just test Gcode, for more info (userguide) please look at: https://3dlabprint.com/shop/cessna-152-based-trainersport-plane/
Wydruk około 4,68 €–5,72 € nettoWstępna wycena jednego wariantu
Just a addon for the Lego Skeleton: https://www.prusaprinters.org/prints/78695-mega-lego-like-skeleton-101-scale I wanted the Lego Bicorne for my skeleton. Did not have the skills to make it myself. So after a long time trying to make it,…
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
Minimal remix of @Dingezzz remix of the 1-30mm Radius Gauges by @Restoredoctor. Reduce the filament use of the original model by 52,8% from 225,72 to 106,38 Three prearranged build plates in 3mf and stl format for all tiles with correct…
Wydruk około 2,15 €–2,62 € nettoWstępna wycena jednego wariantu
This is a zero clearance throat plate for Ridgid R4512 table saws. These may or may not work on R4520 saws? I believe they are the same but I do not own one to verify. Because the print is too large for most printers, it must be printed…
Wydruk około 9,84 €–12,02 € nettoWstępna wycena jednego wariantu
The 3D printed mount is designed to perfectly fit the Ikea Tradfri motion sensor, ensuring a snug and secure fit. Whether you prefer a more permanent installation with screws or a flexible and removable option with magnet, this 3D printed…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
This is my slingshot Zlin 526 AS in multicolor. I printed it on a Prusa i3 MK2s MultiMaterial. I printed in PLA, but i do recommend PETG, because its more flexible. Add one (normaly only one is needed!!) M10 Nut into the upper-forward…
Wydruk około 4,44 €–5,42 € nettoWstępna wycena jednego wariantu
Nabeldecken für viele Serienfelgen der Marke Alfa Romeo mit 50mm Durchmesser. Original Artikelnummer: 60652886 Die Embleme gibt es sehr günstig aus China wie z.B AliExpress oder andere Gedruckt in massiv PETG. PLA ging bei mir nicht, da…
Wydruk około 3,67 €–4,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple junction box for reolink cameras RLC-1224A and RLC-520A (with included adapter). Square hole at the bottom easily fits crimped rj45 connectors so you can prepare them before installation of the junction box. I've attached the box…
Wydruk około 3,95 €–4,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed for Makpac size 2 (155mm height outside) Designed in Onshape https://cad.onshape.com/documents/6c8885acbded4393660dad2f/w/ced976dd821b423d755077ca/e/378dd070d238d2d2863483a9?renderMode=0&uiState=63b16e8f08d58430adbfa920
Wydruk około 12,42 €–15,18 € nettoWstępna wycena jednego wariantu
Corner mount for tapo camera C520WS C510W I made the model so the camera holes fit in those models, if you need any other size just let me know or remix it. I've also added a PDF with the 1:1 scale of the entire thing, just print it on an…
Wydruk około 7,98 €–9,76 € nettoWstępna wycena jednego wariantu
Juste cut the read red part in picture Sized to fit with phone case get the base support at https://www.printables.com/model/76576-bike-phone-mount-samsung-galaxy-a40
Wydruk około 4,13 €–5,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Many thanks for Yanev for making such a grat box! Hovewer, after trying to customize it to fit FNIRSI DSO152, it occured to me, that minimal height of the bottom and the lid are 15mm each, a little to much for that small oscilloscope. But…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
The large Lego Star Wars AT-AT tends to fall on its side on the first occasion. This stand makes the model more stable. The top includes an opening for the hatch as well as a slit for the string that lifts Luke. The stand's support beams…
Wydruk około 2,41 €–2,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My car needed new Rim caps. The ones I ordered from Amazon were too big, so I printed my own. They are better, shinier and have the latest VW Logo on them. Let's see how they hold up to the weather. It's a very tight fit! I printed it…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
See pictures, I guess PETG is better than PLA, but I would be happy for feedback…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
https://www.paypal.com/donate/?business=C8C56MQUF7KQ4&no_recurring=0&item_name=Thank+you+for+donating%21+It+helps+me+create+new+projects+and+get+supplies+%26+upgrades.%0A¤cy_code=USD This is an adapter I created for Peterbilt 520 style…
Wydruk około 5,54 €–6,77 € nettoWstępna wycena jednego wariantu
I really had to go for it … This bad boy is a filament print of the robot in mutible pices to combine to a 1,5m tall version. This print is done with regular cheap PLA filament since it was intended to be painted from the very beginning.…
Wydruk około 7,01 €–8,56 € nettoWstępna wycena jednego wariantu
Winner, 1952 Grand Prix of Switzerland, driven by Piero Taruffi Piero Taruffi, a native of Rome, studied industrial engineering and showed potential racing motorcycles, but wouldn't achieve success in competition until after World War II.…
Wydruk około 6,79 €–8,30 € nettoWstępna wycena jednego wariantu
This is a reference pylon for the Rivarossi 5523 model train bridge, to replicate the different ones simply scale it on the X axis. For reference (in Italian):…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
Design: Adapter designed to mount perfectly to the Plantronics Voyager PLT 5200 headset and to interface with a standard soft in-ear rubber earbud (plug). Design software: FreeCAD Dimensions: envelope is about 10mm long x 6mm diameter.…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
coffee tamper for 52mm filter baskets - Like Delonghi home espresso machines. prints well at 0.2, can do finer if you wish to highlight geometry.
Wydruk około 2,08 €–2,54 € nettoWstępna wycena jednego wariantu
This is a remix of @Boogie created Heatbed cable cover: "A slightly simpler version of the heating bed cable cover with the possibility of tightening the screws for the contacts. For this cover you need a M3x12 screw to mount it." I just…
Wydruk około 1,23 €–1,51 € nettoWstępna wycena jednego wariantu
Gear mount for the gears of a Canon PIXMA 2522 inkjet printer feed mechanism.
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Included parts: box width: 145mm length: 145mm height: 250mm volume: 4.5L ~ 152oz lid-18 thickness of 18mm width: 145mm length: 145mm lid-23 thickness of 23mm width: 145mm length: 145mm lid with spoon holder thickness of 25mm width: 145mm…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
M6 nut-caps to fit your grid's M6 bolts if you want to remove the grid (E152) from the GIVI TRK52N top-case. These nut-caps allow you to remove the grid and keep the holes closed. You can also fit them with a rubber washer to keep water…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
While the ICY DOCK MB852M2PO-B can be mounted with the standard hardware in a Supermicro server, it will have a lot of room to move, this adapter fixes that issue by not using the mounting points on the drive but raising it and mounting…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Box designed for outdoor assembly of sparkfun qwiik KIT-15209 rfid reader. Printed and assembled. I have tried to design this so water that enters the box should not reach the circuit board. Cable is to be pulled thru wall from inside of…
Wydruk około 3,93 €–4,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I did not use CAD for this model. I used the absolutly “customizable rugged box” and the Prusa Slicer, to to cut the “wiessmann” bit holder in pieces, placing it in the box and merge it to a new model. Great tools if you know hot to use…
Wydruk około 14,56 €–17,79 € nettoWstępna wycena jednego wariantu
Update [2023-10-20]—I have a model with a full set of replacement blocks, not just the disc: https://www.printables.com/model/620841-replacement-blocks-for-melissa-doug-beginner-patte This is a replacement disc for the Melissa and Doug…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
This handle extension allows for an upright posture while pulling the compressor behind you. The handle was printed with PETG and consists of four parts that are joined together using M4 screws and nuts.
Wydruk około 14,30 €–17,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Decathlon rear view mirror 520 (ref 8600893) didn't fit my bike (and many people's bikes judging by the product reviews on Decathlon's website) as the internal diameter of my handlebar is narrower than the mounting adapter provided…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I Remixed the Steamclip - Steamdeck Attachment System - VESA Attachment by Mike Brumm to create a dock where I could attach my battery my steam deck and my Anker A8352 hub. I borrowed pieces from different sources to create this dock that…
Wydruk około 18,83 €–23,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The "group" files (pct) originate from my bachelor's thesis and exclude 35%, 45%, 55%, and 65% (we decided in initial testing that we could skip these). They also exclude Support Cubic, as there is no difference between it and the…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Da das Inrico T522 manchmal recht wackelig ist habe ich mir diesen einfache Stand konstruiert. Es wird in die beiden Führung geschoben. Um es einfach zu halten wird an der Schlaufe ein Haushaltsgummi befestigt und einfach nur über den…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Prasklý kontakt na nabíjecí stanici. Reklamace neuznaná tak jsem vytvořil vlastní a dávám kdyby měl někdo stéjný problém.
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
I had to make a slight modification to fit the power brick that came with my T90B kit. This brick is slightly larger in height and width compared to the one in the original design. I accidentally added a few extra mm in width but it works…
Wydruk około 4,97 €–6,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a Heat Insert Mod of the great DIN Rail Bracket from Fabian. M3 Heat Inserts up to 5.7mm can be used. If you want to create your own mounts for it - hole distance is 52.5mm. I will also publish several mounts I created.…
Since many of the new Chamberlin/LiftMaster garage door openers do not have removable light covers, including mine, I decided to make an enclosure to prevent any shorts and keep the PCB properly protected. This is an enclosure for the…
This spool adapter downsizes a 72mm filament spool bore diameter - Sunlu, Anycubic, Crealty, Hatchbox, et al to fit the Bambu Labs' AMS Lite rotary spool holder. Tested on A1 Mini using default settings for any given layer height and…
Print recommendations: PETG ist most likely the best thanks to it's slight flexibility 0.1mm or 0.15mm layer height recommended due to the small hole the lube goes through 3 perimeters work great. 2 is probably maybe also enough.…
Hi, I have designed the Fifteen52 Tarmac alloy wheel from scratch in fusion 360 to better suit an rc car, the material (PLA+), the printing process (FDM) and still retain the famous design. The wheel is designed to be printed face down…
New 52 Batman Inspired Helmet Enjoy Category: 3D Printing
I printed the STL "original" with an Ultimaker 3 Extended in PETG/PLA. You can print the STL "optimized4print" easyer without PVA.
Connector housing for DC-5521 / DC5521 low voltage connectors. I did not like that there is no strain relief when attaching cables to the typical DC-5521 connectors you get on eBay or Amazon, so I designed these housings. I left the area…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
I redesign the model created by Callan McNamara of a case for the Samsung Galaxy A52 phone. I adjust the cut out for buttons and connectors, tightened the case and proposed an other pattern cut out in it. I tried to print it in flexible…
This handy tool attaches to the outside of motorcycle chain oil cans, and enables you easily oil the chain with one hand. It splits the oil path from the outlet tube into two and places the oil over the rings where it is supposed to go.…
The B-52 Stratofortress is an American long-range strategic bomber. The B-52 was put into service in 1955 and has remained in service for over 60 years. The USAF projects that it will serve another 30 years before it is retired. Since its…
I made a steel wheel with a deep dish for my tt02. I made these wheel 52mm high, 26mm deep with and of set of ET02 (2mm positive) to suit my Tamiya TT02 and use original tires. The wheel is designed to be printed face up with supports at…
Stand for the Lego Millennium Falcon (ref. 75257). Glue all parts. RELEASE 09/04/2025 Publishing the files in STEP format for customizing.
Extrusion corner brackets with built-in plates. Short and tall versions for 2020, 3030, and 4040 extruded aluminum -- and now with 2525. Print three of each for each corner. I like to break things down to essential patterns and make…
Someone asked if it was possible to design and print a killflash for an EOTech so I gave it a shot. There's probably other existing models out there already but it was a fun little project. It works better than I expected and would…
Extruded this from original Prusa DXF files. MK42 = Prusa i3 MK2 and MK2S (frame, Y carriage) MK52 = Prusa i3 MK3 (frame, Y carriage, fronat & rear plate) Looking for ALU extrusions? Look here: https://www.thingiverse.com/thing:2838381…
This model is compatible with the lego system.
A simple gauge pod for the Nissan S13 that mounts below the dash. It replaces the oem vent assembly. fits 52mm gauges and 60mm gauges My design is a straight replacement of the oem vent assembly. no cutting, no drilling, 100% reversible.…
Tube Case for the Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html Print Settings: PETG 0.2mm layer 4 walls 15% infill add support on everything…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a remix of the excellent Gen #1 (R50, R52 & R53) Mini Cooper phone mount by weber395 (https://www.thingiverse.com/thing:4107581). I wanted a simpler version with a ball mount. fits same as the original, pretty much snaps into…
Bei Fragen gerne Anschreiben, oder wenn ihr mir die Anforderungen für eure Probe schickt, kann ich dazu auch eine fertige Druckdatei hochladen. Für Creo .prt Datei Anschreiben. Die .gcode Datei ganz oben entspricht den Anforderungen der…
About A snap on case for the Galaxy A52s. I've uploaded versions with and without the back pattern shown in the picture. Made with OpenSCAD, I've included the .scad file in case you want to tweak it. Printing I printed on a Prusa MK3s at…
Generic tool mount for most 52mm spindles. Print instructions 45% infill is probably more than enough, 2+ perimeters (1mm+ walls) Fits the MPCNC Primo version only. https://www.v1engineering.com/
This model is compatible with the lego system.
Bumper case for Samsung galaxy A52 5G with geometric cut-outs. Approximate walls thicknes ~2.6mm. All necessary holes (for usb socket, microphones, etc) arranged well, button tabs also. Print with TPU filament, layer height 0.15mm (first…
A magazine I designed after my factory CZ one. Might require some hand fitting. The spring and follower are steel.
Originally published here: Motorola Moto G72 G82 & Edge (2022) xt2205 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay…
You can scale to suit but at 100% it just works and doesn't use that much filament. 0.15mm layer height using a brim. If you print multiple on 1 bed, make sure your retraction settings are dialed in as it will create multiple artifacts.
Just a addon for the Lego Skeleton: https://www.prusaprinters.org/prints/78695-mega-lego-like-skeleton-101-scale The real Lego Epaulettes don't fit on a real Lego Skeleton minifig, so had to make it a bit longer, so it will fit the…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO nRF52840, which is an Arduino & CircuitPython capable Nordic nRF52840 board with Bluetooth 5, BLE and NFC that comes with an onboard antenna and costs around $9.90. The product…
A box to contain an arduino nano connected with a rc522 rfid module. Not Fully satisfy by Dgoma box design ( http://www.thingiverse.com/thing:1413827 ) I decide to make my own. Like Dgoma I could only recommend the Miguelbalboa's work for…
Improved version of my older 52mm lens cap. Prints in just two parts and clips together without screws or springs. Designed for PLA+ filament and requires supports. Print one 1x body with your selected design and 1x spring
Make sure you have everything wired correctly before pushing the cover in, disassembling is a bit tricky, used small tolerances.
Print your legendary Kamov Ka52 helicopter at home. STL file. Tested.
1/2/2025 user Jonathan Wolff reported box will also hold Anschutz 10 round magazines 8/21/2024 9/21/2024 Added two Savage labeled lids and one blank lid. 2/22/2024 User reddog kindly advised box will hold Savage MkII 10 round mags.…
Model of 1A tensile test specimens according to ISO 527-2 standard.
This 3D printable Makita LXT 18V Battery Terminal is a remixed version of two existing designs, featuring several enhancements for improved usability and compatibility: 3-pin compatibility: Expanded to accommodate 3-pin configurations,…
This is a gauge mount to fit 52mm gauges into a MK3 golf central air vent. The design replaces the existing air vent and includes a back plate to allow mounting of a variety of different gauges. The back plate has two print in place…
I made this JEEP Wrangler model in Fusion 360 and printed on my Biqu B1. The body, vinsch and rearview mirrors was printed with bed support. Everything else was printed without support. 5mm steel axle L=80mm or use the printable one DON'T…
This model is compatible with the lego system.
Blender file included. For quickest and most economical printing, set wall count to 1 and 0% infill.
This case is useful if you have a nice!nano or pro-micro nrf52840 board that you want to use as a keyboard dongle . The lid snaps in place. There are 2 small holes in the case which align with the leds on the supermini pro-micro.
In honour of Pokemon Go's Treecko Community Day (March 23rd) I have knocked up a Treecko one piece model Needs supports! Print instructions Category: Creatures
Model approximating the budget bluetooth development board
This is a low poly B-52. It is modeled after the static display at the gate of Offutt AFB in Nebraska. Category: Vehicles
Hanging brackets made for M3 screws. I recommend having the bridges and supports set up properly beforehand. Added version of bottom piece with screw holes inside.
This model is compatible with the lego system.
The world-famous US strategic AirForce bomber called the B-52 Stratofortress is borought to you by VualtChaser Settings: Printer: Prusa MK3 Slicer: PrusaSlicer Infill: 5% Retraction: No Nozzle Size: 0.40 Supports: Yes. How to print: To…
This model is designed to fit on any desk 45mm in thickness or less. The base plate is designed to fit both the stick and the throttle. It attaches to the base of the Hotas via the holes used for the suction cups. The opening for the M3…
A compact tube-style enclosure designed for the Seeed Studio XIAO nRF52840 & Wio‑SX1262 Kit . This case is suitable for portable Meshtastic or MeshCore LoRa nodes , powered by a single 18650 Li-ion battery. The cylindrical design protects…
Hi It is my wheel to rc car. I was inspired by the Alpine BMW E21 wheels. offset 3mm widht 25mm diameter 52mm hex 12mm I recommend printing on the inside
This model is compatible with the lego system.
This model is compatible with the lego system.
Cleaned up the AR152 exoskeleton design by Sigint Systems. Internal surfaces are now parametrically defined instead of a boolean subtract of a mesh. This means a cleaner file that needs fewer supports and support blockers to print cleanly.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** This opening is another source of hot air leakage -…
This model is compatible with the lego system.
Overload protection part for BMW C1 stand mechanic See Repository with full history, issues and more: https://github.com/jteiwes/overload_protection Design The design was created from a broken part by measuring and test-printing several…
Hey friends! This model was one of my first ever attempts at 3D modeling. For a better solution, check out this model . For a great model to add even more drives in the optical bay, check out this model . I have created a hard drive cage…
