1905 modeli
NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
Overview A rugged and reliable ammo storage box designed for firearm enthusiasts, reloaders, and range goers. Holding up to 81 rounds of 5.56, this compact case fits easily inside a range bag, making it a great alternative to flimsy…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Description Stripper clip holds 10 rounds of 5.56/223rem or any other similar cartridge Intended for clip loader located here Print instructions No rafts No supports 0.20mm quality 15% Infill PLA + or better Thank you and happy printing!
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Printed in PLA, 0.4mm nozzle, 0.2mm height, 15% infill density, and no supports. Should allow you to read pinouts and wire the board while in case. Can be powered in case. It is a snug fit. I recommend sliding the board into position and…
Wydruk około 3,38 €–4,13 € nettoWstępna wycena jednego wariantu
Designed a case for the Arduino Mega 2560 with a hexagonal pattern, because the ones I found, didn't fit the non-original boards I've got. I Made sure that it'll still fit the original boards. Case should lightly snap together, bottom…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
Wall bracket to hang STIHL SH56 Blower. Attached to the wall with 4 screws. Reenforce with 1/4"-20 Thread Size, 2-3/4" Long Button Head Hex Drive Screw 1/4"-20 Thread Size, Hex Nut If you download and/or add this model to your…
Wydruk około 6,32 €–7,72 € nettoWstępna wycena jednego wariantu
Halter für eine 5690 pro. Bohren: Lochabstand 22 cm Neu (3.25): Version mit mehr Wandabstand für Glasfaser-Anschluss Mount for a 5690 pro. Drilling: hole spacing 22 cm New (3/25): Version with more wall clearance for fibre optic connection
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
Using Prusa Slicer negative volumns.
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This 223/556 25 round ammo box was designed in Fusion360 and printed on a Prusa Mk3s+ with eSun pla+. This was specifically designed to be a gift for my pap. I have 5 round boxes as well, but haven't posted them yet. 3mf and gcode files…
Wydruk około 12,87 €–15,72 € nettoWstępna wycena jednego wariantu
Bonsai pot 31 rectangular beveled 199x149x56mm, Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Made a ski box 56°NORD style for RC cars
Wydruk około 10,15 €–12,41 € nettoWstępna wycena jednego wariantu
I used Sneaks “raspicamcover_lense.stl” and moved the hole from the bottom to the top and added a few bosses to hold the camera against the base.
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A little helpful file for making cases to hold either; Wemos LOLIN D1 mini V4 TP4056 BMI160 Holds these parts loosely. Handy for making a case for SlimeVR Open Source VR Trackers - Github - Docs - Schematics Option for my first test in…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
These are motivational message ear savers for use with surgical masks. I have optimized print settings for 0.6mm nozzle on Prusa I3 MK3S printers. I am using amazon basics PETG. Print instructions The settings are in the file. These print…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Lego City Curved Rail Normal Radius 40 studs new version Radius 56 studs for bigger curves Print instructions Printer Prusa XL Multihead Filament: PLA Print height: 0.2mm Nozzle: 0.4mm Support: Are needed at the ends
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
A mount which will let you attach a Raspberry Pi Camera to 40mm Fan Spacing, you can share the same screws with a fan if they are long enough. I couldn't find a similar mount so I decided to go ahead and try to make my own with Fusion360…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
ENG Holder Adapter for G-Shock GW-M5610U-1, should be compatible with GW-5000U-1 and other GW-5xxxx models from G-Shock with similar rigid bracelet and shape. Original Model by @PRINTSY…
Wydruk około 1,50 €–1,84 € nettoWstępna wycena jednego wariantu
So I am new to Fusion360 and made an improved version of my Raspberry Pi Camera mount! This Camera specifically is; Waveshare - RPi Camera (B) - OV5647 This mount uses two 40mm fan spacing screw points. I made this to match the 40mm fan…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
I created this ammo holder so I could quickly load 3 AR magazines at a time with my speed loader. It works great, only think I had to do after the print is just take a wire brush through the holes to clean up some of the filament stray.
Wydruk około 2,79 €–3,41 € nettoWstępna wycena jednego wariantu
Replace the original M6 threads on the OV5647 sensor (Arducam/Zerocam) to M7 threads with this casing. Before changing the threads, you need to remove the original M6 lens casing from the OV5647 sensor body. To do this, you can carefully…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Remix of Ereen's DM556 DIN Rail Clip Mount, altered to use M3 Heated Insert Hardware. Modifications: Extended Base to fit full width of DM556 variant Thickened mounting surface to accommodate M3 Heated Inserts (3.4mm → 7mm) Added Fillets…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 3,82 €–4,67 € nettoWstępna wycena jednego wariantu
Neulich im Repaircafe wurde ich gefragt ob man mit den ständig kaputt gehenden Deckeln für den Duschablauf nichts tun könnte, da habe ich eben mal anhand der kaputten Vorlage ein Modell des Deckels erstellt. Gedruckt habe ich das erst mal…
Wydruk około 3,50 €–4,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print with supports for underside and mirrors. Infill can be quite low (5-10%) Doesn't need to be strong. Sliced files are added for an ender 3. The two sides will glue together or can be printed as 1 whole part.
Wydruk około 3,09 €–3,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed successfully on MINI+ from recycled PETG with 100% infill. Works magics.
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model have 8 slots for 3x1,5mm circular neodymium magnets(press fitted). 2 parts of the case are held together with 3 M2x10 screws and M2 heat set inserts (3,5mm OD, 3mm height).
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
BMW 503 1956-1959 Coupe
Wydruk około 4,98 €–6,08 € nettoWstępna wycena jednego wariantu
Shade Cover for Neewer Dimmable 5600K USB LED Video Light One of the lamps still outputs light even when powered down. Something has to be wrong with the switch. In the meantime, I created an insert that would act as a block for the lamp.…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Building RH3Ds Ender 3 NG based on an Geeetech A10 I needed an adapter for the electronics box to mount the GT2560 v3 on DIN rails. This is a quick an dirty model directly created in PrusaSlicer but fulfills the purpose.
Wydruk około 1,33 €–1,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement part for Massey Ferguson and SDF tracktors with cod: 0.007.5562.0 I used PLA but also PETG can work well
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
The buttons on the tape recorder were broken. I printed the prostheses and glued them on. Check video https://youtu.be/IVWlkcGp7GQ
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
simple tray to fit inside the rear centre console of the Ferrari 456M supports needed on build plate for overhanging top edge
Wydruk około 4,62 €–5,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A replacement hood release handle/lever for the BMW E28. This is a replacement for BMW part number 51231868556. This part was broken on my 535is which required me to use pliers to pull the hood release cable. I created this replacement.…
Wydruk około 2,61 €–3,19 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
EN: To indicate that the container is empty. To identify the empty reading or indicator position on the display or container. DE: Um anzuzeigen, dass der Behälter leer ist. Zur Identifizierung eines leeren Behälters auf einem Display oder…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
EN: To indicate that the container is half-full. To identify the half-full reading or position indicator on the display or container. DE: Um anzuzeigen, dass der Behälter halbvoll ist. Zur Identifizierung eines halbvollen Behälters auf…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Beschreibung Das Modell der ehemaligen katholischen Kirche „Zum kostbaren Blut“ (Rheinstraße 8, 35684 Dillenburg – Frohnhausen) ist das fünfte einer Reihe von Modellen profanierter, umgebauter, umgewidmeter oder abgerissener Kirchen der…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
This is a 3D model of an Arduino clone of the Mega 2560 microcontroller board. I needed one for an enclosure design, but couldn't find one that had precise dimensions for the mounting holes. Despite no officially-diagnosed OCD, my brain…
Ammo box to hold 100 223/5.56 cases. All screws are m3x30 unless you use the handle then those 2 should be m3x35, m3x40 for double handles. March 2024, added a 9mm tray as requested so you could do half and half or use the same box for…
The Fieseler Fi 156 Storch (Stork) was an unarmed liason aircraft produced in Germany before and during World War II, noted for its superb STOL capabilities. It would later be produced and flown by the French until 1970. I tried my best…
Bin for IKEA SKADIS. Hooks need support. Size: A box can be in standard shape , or equipped with a wave and/or separator and/or hexagonal bottom. The separator is not available if the hexagonal bottom is present. Folders: There are 564…
Perfect gift packaging for your friend (56 screw). Screwdriver included. !!!!!!!!!!!!!! If there is any problem with screwing in the screw, first screw in the M8 metal screw which will correct all errors in our printers!!!!!!!!!!!!! I…
Remixed from the excellent source model - thank you FW_3D for uploading the .step files 🙏 Differences from the original: Added clearance for rounds Added captive guides to the pusher to keep it engaged Rotated viewing slots to allow…
I designed this wall mount for a Fritz!Box 5690 Pro using Tinkercad. I printed the model in PLA without supports (5 walls, 25% infill). However, I recommend using PETG or ASA if available. Note that the STL file needs to be mirrored for…
This is a mockup of the TP4056 USB C Battery Charger Li-ion Module for further case designs sizes and dimensions have been measured carefully If this helped you, please leave a like! That's my reward and payment! 👍 I ll be happy to get…
Happy to present my version of the TR 560 Mk VI Tricorder as seen on the first season of Star Trek TNG. This early style featured a small hand scanner that tucked away at the top, includes a medical tricorder module with its own stow-away…
50 count storage box. two potential lids. the recessed lid is thicker on the side to reinforce the track. the tray may be modified and published later. Print Settings Resolution: .2 Infill: 20 Notes: this was my first attempt at a pattern…
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
I recently got hold of a couple of notebook batteries... ... So I needed a battery charge and test setup. I build a charger holder around my battery booklet thing: https://www.thingiverse.com/thing:4113164 This adds a piece for the TP4056…
I took the SAAMI specs and designed a chamber flag that will accurately index in the same place regardless if you use .223/5.56 or .300 Blackout. Because it indexes on the datum line of each cartridge it will always stick out the same…
.223 Remington, almost identical to 5.56x45mm NATO, also known as just 223 or 5.56, is a centerfire rifle cartridge. .223 Remington was designed by Remington Arms in 1957. 5.56x45mm NATO was designed by FN Herstal in the 1970s. Print this…
When closing their operative business back in June 2024, Windy City Woodwinds have released their designs to the public and asked for broad distribution, which I am happy to do here on Printables. This is the “Series 56”. I have…
Print this in TPU. I modeled this with help from reference images from the internet and fixed after testing on a real phone UPDATE 1: I redid the placement and shape of holes on top and bottom, according to better reference images. I…
FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…
The .223 Remington is a rifle cartridge developed in 1957 as a hunting bullet. A military version, the M193, was used by the United States Army in the M16 rifle. The 5.56x45mm NATO was also developed from the .223 Remington. Category:…
Rozměry jsou přibližné podle fotografie originálního nástavce. Zajištění pomocí šroubu M6. Matice lze vsounout volně, hlavu šroubu je lepší nahřát vtisknout za tepla. Vítám případné připomínky, udělám změny :) Tisk bez podpěr.
Protective case designed specifically for the TP4056 charging circuit. Featuring a entry point for USB cable, a dedicated exit for power cables, and a secure pressure fit design. With this circuit things can get quite hot so i designed it…
Es un estuche para tu Arduino MEGA
56 Room Signs Like "The Office" Logo These are residential room signs designed in the style of the logo for "The Office" TV show. Please post your makes so I can see which signs/pictograms are the most popular. Dual Colors with a Single…
A few 5.56 NATO rounds I modeled up to use as snap caps or dummy rounds. All three variants are able to feed and extract in my rifle. The Spec variants are exact to NATO spec dimensions and the ThickRim has a roughly 0.3mm thicker rim for…
I designed these ammo holders to hold 400 rounds of either .223, 5.56, or 300 AAC Blackout ammo. These fit into the MTM .30Cal Ammo Can for storage. Print instructions Photos are original design, I recessed the dividers down a bit to save…
Print using at least 4 perimeters and with 20%-30% infill. I suggest some material that resists cold flow better than PLA such as PETG or ASA. Leave the part the way it is oriented to the bed so the layer lines are arranged properly for…
In case you want to design a part that includes a tp4056 charge controller.
This model is compatible with the lego system.
A sleek, minimalist 3D printed display stand for the LEGO® Speed Champions DeLorean. This stand is easy to print and will look great on your shelf! I printed my stand using default print settings with a few modifications. Since the bottom…
I resized the original design to be 1:48 scale so that 3.5" is equal to a 14 foot high street lamp. This size matches the Dept. 56 Snow Village houses. I increased the size of the hole through the middle so that wires could be fed…
I needed a stand to mount my Arduino Mega 2560, a standard-sized 16x2 LCD display, and a full-sized breadboard. So, I whipped one up in Fusion 360. Some notes: While designed to fit the Mega 2560, the left four holes also allow mounting…
Disclaimer: This is not an official LEGO product. All design rights, trademarks, and intellectual property belong to the LEGO Group. This model is a fan-made recreation of the LEGO 2556 Ferrari Formula 1 Racing Car set, intended for…
English I have remixed the wonderful beer bottle helmet model and replaced the helmet with an NVA M56 helmet from the GDR. Print settings You can use the print profile (3mf) with pre-configured settings and colored hand for ams usage. Arm…
Even after 5 times of printing the AngryCam OV5640 mount of "chri.kai.in" I could not get the thing to print and fit together correctly. The tolerances seem quite tight and you need an extremely precise printer to get good results. Apart…
UPDATE 3/18/24: I have split this into two models, the box and the lid. I have also made it taller to better accommodate different types of ammo. These I've uploaded as STL files. Thank you everyone for your feedback. This is a simple…
A holder for the TP4056 lithium Battery charging board (25*19mm). UPDATE:2018/10/01 V2 Fits most of TP4056 boards. Fits most of 18650 batteries with protection circuit. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill:…
Race Mag Pouch for 223 556 Pmags for ELS mounting system Update 11192023 Added Strengthening Ribs to the mounting side of the pouch Reduced mounting height by 1mm Made insert holes 0.2mm smaller Update 01152023 Got some feedback about the…
Print like you use to do.
Chamber clear flag for AR-15 modelled after .223 Remington/5.56 Nato round specifications.
You will need M4x6x5 heat inserts. If you would like to use something else or screw straight into plastic, there is also a .step provided. M4x10 screws are a perfect match for attaching the stepper drivers but make sure the head isn't too…
Dummy 5.56mm x 45mm NATO Bullet Chain Link, that snugly fits 5.56 dummy rounds for M249 and other 5.56 chain-fed airsoft replicas. It's a model based on the M27 disintegrating link designed for ammunition belt-fed firearms. I printed mine…
So yah, I downloaded this like a lot of other ppl and struggled like crazy with the original design. it kinda sucked.. and I was determined to make it work cuz I know lots of avid shooters, including myself, who would benefit greatly from…
Thanks to Arshia who helped me testing this case. Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention to the file names. If you have any request…
This wall mount for the FRITZ!Box 5690 Pro is a refined remix designed with enhanced stability and ease of installation in mind. Unlike the original, this model includes a connecting center section to keep the brackets perfectly aligned,…
This thing contains a mounting plate and a drilling guide for the “Arduino Mega / Mega 2560 / Due Drilling And Mounting Plates”. The plates are not symmetrical. The notch shall be on the power jack and ethernet cable side. The base plate…
Giant Brick Pirate Flintlock Pistol (x10) Print two part and two join
Note: Before printing, please measure the size of the magazine slot of the gun you want, and fine-tune the size through the slicing software to avoid the situation that the magazine cannot be loaded into the gun.
Wallmount for DeWalt DCS356 Oscillating tool
Slim Ammo-Box for .223 / 5.56 ---.308 / 7.62 Box now also available! --- https://www.printables.com/model/1338689-308-slim-ammobox-50rds-762x51 Update: Slot for label infront of box engraved “.223 Rem” infront of Box Locking mechanism…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
Recommended items to complete this crane are hot glue, BBQ skewers, Popsicle sticks, rubber bands, 30 minute epoxy, kite string, small-sized hand-held drill and bits, four 360 degree rotating 9 gram servos, one receiver, transmitter, and…
A simple holder for AS5600 magnetic encoder that can be used with a NEMA17 motor. Details here : https://community.simplefoc.com/t/simplefoclibrary-support-for-stepper-motors/137/42 Category: Engineering
Needs printing with supports.
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a scare and dimensionally correct print of a 223 cartridge. Category: 3D Printing
printed with ankermake m5 in normal mode, 50% infill, support
This is a remix of one of my favorite ammo boxes. It holds 50 cases. I liked the original but wanted one for 5.56. The ones pictured were all printed in PETG and work great. Only the latch and latch hinge need support. The second picture…
Recently my family decided to remodel some parts of the house, that included cutting some walls using a grinding disk. In order to create channels to hide power cables in. I purchased a DeWALT DWE4156 along with a wall cutting disk, I was…
This model is compatible with the lego system.
This model is compatible with the lego system.
Replacement follower for Magpul Gen M3 Pmag in .223 Remington / 5.56 NATO. Modeled in Blender, I included the .blend file. If you are looking for the baseplate, @mocobaco has one at https://www.thingiverse.com/thing:2646840 Category:…
A simple holder for the AS5600 magnetic encoder. The boards press fits into the the holder. It uses the mounting holes already on the stepper motor. Printing downloads 0.2mm layer height No supports required
Wanted an easy way to mount my Dewalt 6.5" circular saw in my garage. I designed a two piece mount that the tool slides in and out of easily. Screw the two pieces into the wall with a 10" gap between them. Slide the top of the plate of…
![[Remix] Modular Watch Stand : Holder Medium Adapter for GW-M5610U-1 / G-Shock GW5xxxx](https://media.printables.com/media/prints/540338/images/4351600_41e9d409-f21a-4e93-8e71-dd39016b6e93/dsc_0482.jpg)
