Wyniki wyszukiwania: 5g

Sortowanie

586 modeli

P

Nature's Helicopter - 2.5gm Maple Tree Seed Pod Quick Print

The frame rate doesn't do it justice, but it does indeed spin like a helicopter! Maple trees are a diverse group, boasting around 132 unique species. These trees produce seeds, commonly referred to as double samaras, which come in a range…

Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu

Pobrania
6599
Polubienia
1829
Ocena
4,66
P
PrintablesOK

VIVO v 21 5G phone case

Just a case with an integrated pay card holder.

Wydruk około 1,82 €–2,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
102
Polubienia
2
Ocena
0
P
PrintablesHarms3D

DinA5 Lineal 55Grad Template for Calligraphy Copperplate Anglaise

I designed this template for my mother, who had previously made the template out of cardboard. "Marketing on" You love calligraphy and want to bring your penmanship to a new level? Then this DIN A5 stencil is just right for you! This…

Wydruk około 3,74 €–4,57 € nettoWstępna wycena jednego wariantu

Pobrania
83
Polubienia
21
Ocena
0
P
Printables3DPrintDemon

Voron 2.4 / Trident Canopy Top Hat - REMIX Split model, half printing time & 5g supports

…Please be sure to hit like & post a make, I'd love to see your prints! EDIT: Finally! STEP file has been added!! Sorry it took so long guys, enjoy!! Add some class to your Voron with this awesome canopy / top hat! If you have a smaller…

Pobrania
14 061
Polubienia
553
Ocena
4,97
P

Ultra-thin credit-card sized phone stand (print-in-place). Only 5g of filament!

No more fiddling with resting your phone against random objects when bored on a flight of cafe after realizing you don't have a phone stand with you. Credit-card sized and ultra-thin to fit in any wallet. PS: only works with the phone in…

Pobrania
11 548
Polubienia
1984
Ocena
4,39
P
Printablesquibeck

Mini Whistle – Extremely Loud (115dB) – 1.5g Edition

This Mini Whistle – Extremely Loud (115dB) – 1.5g Edition is a slightly larger, sturdier version of the original mini whistle, still small enough to disappear on a keyring. Weighing in at 1.5 grams , it prints quickly and comes off the…

Pobrania
8742
Polubienia
1027
Ocena
4,6
P

Ubiquiti Unifi USW-Flex-Mini 2.5G 5 Wall Mount

An unofficial wall/table mount for the Ubiquiti Unifi USW-Flex-Mini 2.5G 5. It can be either screwed in place with two M3 screws or attached with double-sided tape. I have included Three versions of this model. Open mount: Uses less…

Pobrania
2239
Polubienia
124
Ocena
4,88
P
PrintablesExLoop

Servo horn round for 55G Servo (25T spline)

This is a round servo horn for a 55G Servo with 4 M3 holes.

Pobrania
2180
Polubienia
47
Ocena
4
P
PrintablesPosh7904

5g creatine long scoop

I needed a scoop with these characteristics: long handle to reach the bottom of the 500g container. pick up 5g of creatine (optimal amount for muscle growth). a hole to hang it. I designed this scoop for a 500g yamamoto creatine…

Pobrania
1795
Polubienia
205
Ocena
5
P
PrintablesAlex

Samsung Galaxy A13 4G/5G Case Remix

remix, added honeycomb on the back

Pobrania
1592
Polubienia
61
Ocena
4,33
P
Printablesjuricabi

SAMSUNG GALAXY S20 FE / S20 FE 5G TPU CASE

Bottom is flat. Case is tested. Best printed slowly in TPU.

Pobrania
1588
Polubienia
83
Ocena
4,89

Trombone Mouthpieces based on Bach Sizes 7C, 11C, 5G

These mouthpieces were designed in Fusion 360 taking inspiration from the profiles provided by the Wedge Mouthpiece website (https://wedgemouthpiece.com/all-trombone-mouthpieces). The mouthpiece files are named according to their names on…

Pobrania
1560
Polubienia
125
Ocena
5
P
PrintablesRenba

8mm Lead Screw Grease Applicator – Super Lube 21030 (85g/3oz PTFE Grease)

8mm Lead Screw Grease Applicator for Super Lube 21030 A practical grease applicator for lubricating 8mm lead screws directly from a Super Lube 21030 tube (85g / 3oz PTFE grease) . The adapter screws onto the grease tube and allows you to…

Pobrania
1541
Polubienia
468
Ocena
5
P

USW-Flex-2.5G-8-PoE 10-inch Rack Mount

A 10-inch rack mount for the Ubiquiti Unifi USW-Flex-2.5G-8-PoE switch. Add this switch to your 10-inch rack with this mount! This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . I have…

Pobrania
1465
Polubienia
145
Ocena
4,57
P
PrintablesLiebherk

5g (7.5ml) scoop for creatine

Customized version of https://www.thingiverse.com/thing:682146 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=682146 Instructions Using the following options: spoon_shape = 3 volume_1 = 7.5 unit_volume_1…

Pobrania
1419
Polubienia
24
Ocena
5
P

USW-Flex-2.5G-8-PoE 19-inch Modular Rack Mount

A modular, 2-part, 19-inch rack mount adapter for the Ubiquiti Unifi USW-Flex-2.5G-8-PoE. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models…

Pobrania
1205
Polubienia
82
Ocena
5
P
PrintablesMAZ

Samsung Galaxy S21 FE (5G) Phone Case

Case for Samsung Galaxy S21 FE (5G). Printed with TPU 95A Update V2: Added a v2 file where I removed the bit around the volume buttons to have a better access to the buttons. V1: Support recommended for gap around volume buttons at the…

Pobrania
1145
Polubienia
49
Ocena
4,67
P

Ubiquiti Unifi USW-Flex-Mini 2.5G 5 10-inch rack mount

A 10-inch rack mount for the new Ubiquiti Unifi USW-Flex-Mini 2.5G 5. To install your switch to this mount, simply slide it in. But once you reach the rubber feet on the bottom, press them a little so they can compress and enter the…

Pobrania
1118
Polubienia
113
Ocena
5
P
Printablestato_713

Samsung Galaxy A32 5G & M32 5G a326 m326 case

Originally published here: Samsung Galaxy A32 5G a326 case by tato_713 - Thingiverse Thanks to Phil Nottelling , Samuel Miller and Alex Monk for testing the test version of this case. This is the test case for the Samsung A32 5G version…

Pobrania
1115
Polubienia
53
Ocena
4,8
P

The most simple credit-card sized phone stand - less than 5g of filament - very stable with 2 viewing angles choice

No more fiddling with resting your phone against random objects when bored on a flight of cafe after realizing you don't have a phone stand with you. Credit-card sized and ultra-thin to fit in any wallet. This version can hold the phone…

Pobrania
1035
Polubienia
221
Ocena
4,58
P
PrintablesZach

Hydroponic Plant Basket for 75G Marineland Aquarium

Hydroponic Plant Basket for 75G Marineland Aquarium. Fits perfectly in the space between the glass lid and the back glass panel. One section perfectly fits 1x regular, 2x long, and 1x extra long plant basket. The basket reaches the bottom…

Pobrania
1033
Polubienia
200
Ocena
5
P

Ubiquiti Unifi USW-Flex-Mini 2.5G 5 19-inch modular rack mount

A 19-inch, 2-part, modular rack mount for the new Ubiquiti Unifi USW-Flex-Mini 2.5G 5. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models…

Pobrania
957
Polubienia
100
Ocena
5
P
Printables3DJG

Samsung A23 5G case (UPDATED)

Printable casing adapted to Samsung A23 5G. I leave you the configuration and printing files that I have used with good results. The filament I used is Flexfill 98A Fillamentum. I also leave you the stl file so you can make your own…

Pobrania
942
Polubienia
24
Ocena
5
P
PrintablesMaelstrom Reef

Ubiquiti Unifi USW-Flex-Mini 2.5G 5 Vertical Wall Mount w/ Tabs

Remix of the Open wall mount with tabs added at the bottom to allow for vertical mounting.

Pobrania
897
Polubienia
51
Ocena
5
P
Printablesjuricabi

SAMSUNG GALAXY S21 / S21 5G TPU CASE

Bottom is flat. Case is tested. Best printed slowly in TPU.

Pobrania
890
Polubienia
44
Ocena
4,17
P
PrintablesMaciaIT

Protein scoop 15g

The ammount of protein in the scoop depends on how much you fill it. If you fill it like a “bro” you'll get around 15g. If you fill it just to the brim you'll get roughly 12.5g. Enjoy!

Pobrania
836
Polubienia
75
Ocena
5
P
PrintablesMaciej Wyrfel

Samsung galaxy A52 5G phone case

Bumper case for Samsung galaxy A52 5G with geometric cut-outs. Approximate walls thicknes ~2.6mm. All necessary holes (for usb socket, microphones, etc) arranged well, button tabs also. Print with TPU filament, layer height 0.15mm (first…

Pobrania
835
Polubienia
57
Ocena
5
P
PrintablesDengamleninja

Xiaomi Redmi Note 11 Pro 5g case

COMMERCIAL LICENSE ACCESS is available through a patreon membership where you help support me and get commercial license which applies to all my models except remixes i made from others work. https://www.patreon.com/Dengamleninja

Pobrania
823
Polubienia
28
Ocena
4
P
Printablescartster

GL-iNet GL-M2 5G Dev Board Case

The GL-M2 5G Development Board from GL-iNet doesn't come with a case. It is meant to be a development board. They did not create an official case, and I wanted to protect my Modem. The top and bottom pieces fit together without any screws…

Pobrania
781
Polubienia
30
Ocena
5
P
Printableszounds

Moto G Stylus 5G case

This is a remix of dirtdigger's Moto G Power Case, modified to fit the latest Motorola G Stylus 5G phone. I used Hatchbox TPU (95A hardness) with 0.3 mm layer height, 2 perimeters, and 5% infill (see the 3mf and gcode files - for the…

Pobrania
743
Polubienia
21
Ocena
5
P
PrintablesCode and Make

Tower Pro MG946R (55g) Servo Arm Disk Horn Round Mount (20mm)

20mm disk mount for Tower Pro MG946R servo. Disk diameter: 20mm Disk thickness: 2mm Center hole diameter: 3mm Outer hole diameter (with holes version): 1.5mm Outer hole distance from center (with holes version): 8mm They should be a tight…

Pobrania
635
Polubienia
25
Ocena
5
P
Printablesdziobu

Samsung A53 5G case

Simple case for Samsung A53 5G. Materiał: flexible, like TPU. Print with supports.

Pobrania
622
Polubienia
22
Ocena
4,33
P
PrintablesLilFish06

Jumping Frog Toy - less than 5g - no support

I recommend using my gcode if you have a Prusa. PLA Lightning infill no supports 0.15 mm layers

Pobrania
616
Polubienia
77
Ocena
4,63
P
PrintablesJupiterone2

Remix Unifi Flex Mini 2.5G 5Port USW-Flex-Mini-2.5G-5

Remix for the USW-Flex-2.5G-5. Unifi Switch Flex Mini 2.5G Modell For all the people which upgraded from the 1gig Model and wants to use the same mounting holes. Print as you want all options are fine

Pobrania
603
Polubienia
40
Ocena
5
P
PrintablesFilet

Filament Spool Clip (<0.5g, 3min. printing)

The Filament Spool Clip is a small, practical accessory for keeping your filament spools tidy in storage. It snaps directly onto the edge of the spool and holds the loose end of the filament securely, preventing it from unraveling and…

Pobrania
601
Polubienia
149
Ocena
4,63
P
PrintablesGorroth 1007

iPod Classic 5G (30GB) Case with Hexagon Back (and more Designs)

In Case you need one for the thick version: https://www.printables.com/de/model/638928-ipod-classic-5g-thick-case-with-hexagon-back Deutsch: Ich habe dieses iPod Case entworfen, nachdem ich meinen alten iPod wiederbelebt habe (Umrüstung…

Pobrania
586
Polubienia
55
Ocena
5
P
Printablesoclastax

Satsana light 5015, only 35g, for ender 3 (with wire management compartment) + cr touch mount

This is a remix of the very popular Satsana fan duct, i really enjoyed the look and the ease of printing of the mini satsana as it was fairly light and compact, i recently upgraded to a 5015 fan but i couldn't find a satsana design that…

Pobrania
574
Polubienia
78
Ocena
5
P
PrintablesJZ

Fake Dummy Prop Phone - Samsung A14 5G

Have you ever needed a fake phone? Maybe you are running a play or skit, and you need it as a prop, or you want to pull a prank on someone. Well, look no further! This prop is based on the Samsung Galaxy A14 5G, meaning it has the same…

Pobrania
547
Polubienia
26
Ocena
4,75
P
PrintablesNot DeeJ

Viper V2 Modkit (~25g)

Printing Tips- -Print as is, do not reorient the print -Squeeze the clicks inwards if there is too much pretravel -ASA was my material of choice and when done I hit 23.37g -I will be most active in the Video related to the Project here:…

Pobrania
535
Polubienia
36
Ocena
5
P
PrintablesDiew

10 inch rack Unifi USW Flex 2.5G-8-POE and 2.5G-8

USW Flex 2.5G-8-POE (212.9 x 99.4 x 33.5 mm) USW Flex 2.5G-8 (212.9 x 76 x 33.5 mm) both model share same wide and height, so it can use same rack for USW Flex 2.5G-8 just print adapter (small green one in image) and you can use M3 screw…

Pobrania
529
Polubienia
60
Ocena
5
P
PrintablesColoGeo

Fluval Flex 15g Low Flow Spray Bar

A low-flow spray bar for the 15gallon Fluval Flex, designed to reduce the flow in 3 directions. Fits inside the outlet. Use PLA or PETG, no supports required.

Pobrania
526
Polubienia
40
Ocena
5
P
Printablesquibeck

flying disc 0.65g | >5min printing! (+30 meters)

The Flying Disc is a compact throwing toy designed for one thing: distance. With a quick flick from your fingers, this tiny disc launches impressively far — tested at over 30 meters of flight distance — all while weighing under 0.65 grams…

Pobrania
504
Polubienia
80
Ocena
5
P
Printablesdavidc

Samsung A73 5g Case

I hade trouble finding a case model for the new Samsung A73 5G, so here is my effort. It is printed in TPU. Don't forget to add glue stick or similar product to aid print removal. Hope you like it.

Pobrania
499
Polubienia
11
Ocena
0
P
PrintablesDengamleninja

Xiaomi Redmi Note 11 Pro 5g case

Fits the version of the phone with following measurements: 164.2 mm x 76.1 mm x 8.1 mm COMMERCIAL LICENSE ACCESS is available through a patreon membership where you help support me and get commercial license which applies to all my models…

Pobrania
493
Polubienia
12
Ocena
0
P
PrintablesDmytro Piskun

5g Creatine Scoop v4

Updated version of 5g Creatine Scoop v3. The volume of the cavity still holds exactly 5g. The handle was lengthened and returned to the original shape from v1. Perforated handle allows for strength and saving material. The lip of the…

Pobrania
481
Polubienia
24
Ocena
5
P

USW-Flex-2.5G-8 19-inch Modular Rack Mount

A modular, 2-part, 19-inch rack mount adapter for the Ubiquiti Unifi USW-Flex-2.5G-8. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here…

Pobrania
480
Polubienia
43
Ocena
5
P
Printablesisi666

Samsung Galaxy A53 5G Cover

Das ist eine Schutzhülle für das Samsung Galaxy A53 5G. Zum Drucken muss man ein Flexibles Filament wie zum Beispiel TPU nehmen. Die Hülle auf dem Bild wurde mit Fiberlogy MattFlex 40D Rot gedruckt.

Pobrania
472
Polubienia
23
Ocena
5
P
Printablesc-arts-modelle

Samsung A22 (5g) Smartphone-Case with raised lip

Phone case for the Samsung A22 With raised lip (height about 1.5 mm) for a better protection of the display. Compared to the original model, the case is about 1.5 mm thicker. The edge is not flush with the display. Printed in PETG or PLA.…

Pobrania
470
Polubienia
15
Ocena
0
P
Printables3D Try Outs

Three ZTE 5G Model MC7010 wall mount and Base Plate

Three ZTE 5G Model MC7010 wall mount and Base Plate This is classed as an outdoor router. It uses a SIM card It needs to be mounted vertically outside the Sun.

Pobrania
470
Polubienia
10
Ocena
4,67
P
PrintablesGS

Moto G 5G 2024 Phone Case Updated

Moto G 5G 2024 phone case. After feedback from the previous model, I have modified the case, printed, and tested it several times.

Pobrania
462
Polubienia
16
Ocena
5
P
PrintablesDan

15g Silicone, Caulk Remover

A tool to remove silicone and caulk.

Pobrania
448
Polubienia
99
Ocena
5
P
PrintablesAndrea87

Lenovo M720q bracket for dual 2.5g i226 card

This is a very simple bracket to install a dual i226-v network card into a Lenovo M720q tiny. The bracket does not require any support, once printed, snap or cut off the part on the right, stick it through the protruding pins and weld in…

Pobrania
441
Polubienia
29
Ocena
5
P

USW-Flex-2.5G-8 10-inch Rack Mount

A 10-inch rack mount for the Ubiquiti Unifi USW-Flex-2.5G-8 switch. Add this switch to your 10-inch rack with this mount! This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . I have…

Pobrania
435
Polubienia
52
Ocena
5
P
PrintablesDave G.

Motor Mounts with Clearance for 1.5GT Pulleys on Upgraded CORE One/+/L

After installing the 1.5GT belts and pulleys for the Gen2 upgrade on my CORE One+ printer, one of the new pulleys was rubbing on a curved guard built into the stepper motor mount. It made a hard-to-locate scratching sound while printing…

Pobrania
433
Polubienia
181
Ocena
5
P
PrintablesGeertVB

Xiaomi Redmi Note 12 Pro 5G Case v1.0

Xiaomi Redmi Note 12 Pro 5G Case v1.0 Warning: the case does not fit tje Xiaomi Redmi 12 pro plus 5g!

Pobrania
422
Polubienia
15
Ocena
3
P
PrintablesBiTN

Mouse brain matrix (coronal, 40-75g)

Coronal brain matrices for 40-75g mouse brains 2024.04.19 - Added a version with increased slot sizes Print instructions PLA, 0.25 mm nozzle, 0.1 mm layer height --- If you'd like to support my work https://www.buymeacoffee.com/bitn

Pobrania
417
Polubienia
28
Ocena
0
P
PrintablesFoppemoa

Fluval Flex 57L (15gal) feeding hole cover

I remixed the feeding hole cover by Robware to have ventilation holes in it. Had an Amano that wanted to go exploring one day… So I just wanted a cover that keeps them in, but at the same doesn't completely block the already limited…

Pobrania
403
Polubienia
20
Ocena
5
P
PrintablesLars Becker

Samsung Galaxy S21 5G Case Hülle

Samsung Galaxy S21 5G Case. Presenting the Samsung Galaxy S21 5G Case, printed using BambuLab P1P and BambuStudio with a fuzzy skin option to provide an improved grip while holding the phone. (printed both settings on 0.1mm to achieve…

Pobrania
402
Polubienia
15
Ocena
5
P
PrintablesAngel Rivas

U1 10" Inch Rack Mount for Raspberry Pi 4 and TL-LS1005G

[Update 7th of May 2025]: Fixed the fitment issue for the switch, and also made a cutout hole for the Raspberry Pi 4's SD card slot.

Pobrania
396
Polubienia
50
Ocena
4,5
P
PrintablesDiew

10 inch rack Unifi USW Flex 2.5G-5

remix from 6.5 inch rack If you enjoy my work, please consider support at link in profile. Change Log 2025/03/11 change name 10 inch USW Flex 2.5G-5 with Patch Panel A > 10 inch USW Flex 2.5G-5 right label 10 inch USW Flex 2.5G-5 with…

Pobrania
394
Polubienia
54
Ocena
5
P
PrintablesGorroth 1007

iPod Classic 5G (Thick) Case with Hexagon Back

In Case you need the slim version: https://www.printables.com/de/model/554008-ipod-classic-5g-30gb-case-with-hexagon-back-and-mo Deutsch: Nach einigen Anfragen zu einer Version meines iPod Cases für die dicke Varianten des iPods (160GB),…

Pobrania
375
Polubienia
25
Ocena
5
P
PrintablesFoppemoa

Fluval Flex 57L (15gal) lid arms

Two simple arms/props to hold open the lid of the 57L (15gal) Fluval Flex aquarium. They are long enough so that they just fit diagonally on a Prusa MK3S printer bed (just a smidge over 29cm in total length). Update: Two shorter…

Pobrania
372
Polubienia
20
Ocena
5
P
PrintablesStany

Creality K1C / K1 / K1 MAX - ROOT FREE linear rail gantry for stock / powge ( MGN12 MGN9 and 2GT 1.5GT )

Lets save our K1s :-) This is my linear conversion for X axis. Every version i found was complete makeover. Not this one. This is cost effective coz you reuse most of your stock hardware. Designed for STOCK or POWGE idlers. No software…

Pobrania
367
Polubienia
104
Ocena
5
P
PrintablesGrhmhome

Samsung Galaxy A71 5G phone case

Update: I added rounded edges for people who want more comfort. I designed a phone case for my Samsung Galaxy A71 5G case. This might work with the original Samsung A71, I'm not sure. Feel free to do whatever you want with this phone…

Pobrania
365
Polubienia
19
Ocena
0
P
Printableskumuji

Lenovo M920q/M720q Baffle for dual port 2.5GBit NIC

Baffle for dual port 2.5GBit NIC for Lenovo M920q/M720q, in principle should work for other Lenovo-tiny series PC. Here is a link to the file created in onshape:…

Pobrania
351
Polubienia
22
Ocena
5
P
PrintablesLuke

Hose bucket clip for 5gal orange bucket

To hold a fish tank hose on a big orange 5 gallon bucket. Remixed from this model to better fit a big orange bucket from “the big orange hardware store”; it now properly grips one of the rings near the top. I fixed the slanted hook before…

Pobrania
351
Polubienia
47
Ocena
5
P
Printables3DJG

Samsung A25 5G case

Printable casing adapted to Samsung A25 5G. I leave you the configuration and printing files that I have used with good results. The filament I used is TPU Flexfill 92A from Fillamentum. I also leave you the stl file so you can make your…

Pobrania
347
Polubienia
11
Ocena
0
P
PrintablesDouglas Hale

HORACO 8 Port 2.5GbE and 10GbE Ethernet Switch rack mount bracket -Mokerlink Sodola Nicgiga

Rack mount for cheap 2.5GbE switches with 1 SFP+ port. Use one of the models from the original model to fill in the other side. This includes a backstop and block to hold the power cable. These 2 features require support, but no other…

Pobrania
346
Polubienia
32
Ocena
0
P
Printablesludufre

NAS/Storage Mini-ITX 6 disks + 2.5Gbps

Mini ITX NAS with external power supply and 6 HDDs bays. Print parts with 30% infill and 0.20mm (Standard Quality) The dust.stl must be printed without top and bottom layers and with 75% or more infill. The…

Pobrania
339
Polubienia
75
Ocena
0
P
PrintablesWCTT

Moto G Stylus 5G (2022) Snap in Case

I modified the original phone case for my Moto G Stylus 5G (2022) to be able to be printed with PLA and then just snap into place. The original design was great, but it wouldn't fit in the case without it being printed in TPU. This one is…

Pobrania
325
Polubienia
13
Ocena
3
P
PrintablesTANOYCIA 3D

Funda Samsung Galaxy A06 - 5G + Archivo Fusion360 - TANO3D

Funda para Samsung Galaxy A06 5G, mas archivo en Fusion 360 para seguir modificandola y mejorandola a gusto.... Y GRATIS

Pobrania
313
Polubienia
9
Ocena
0
P
PrintablesDmytro Piskun

5g Creatine Scoop v1

A simple scoop for creatine. The cavity holds exactly 5g or 5000mm^3. Prints well without support upside down. Use supports for the handle printing right side up for a smoother cavity result. Check out updated versions of the scoop with…

Pobrania
308
Polubienia
8
Ocena
4
P
PrintablesArt Pud

Case for Samsung S20, S20 5g

I couldn't find any case for S20 so i made one. Might not be super pro but it works. I printed it in 0.1 with supports. Printer was sweating on these hexes. Hopefully someone will have a use of it.

Pobrania
304
Polubienia
14
Ocena
0
P
PrintablesDET-Man

CORE One Pins Mod 5G

The 🥰 CORE One is an excellent printer with a well-designed stock system, but the Pins Mod offers mechanical improvements for enthusiasts seeking enhanced precision and reliability. Inspired by the VORON community, it upgrades the XY…

Pobrania
302
Polubienia
92
Ocena
5

Handyhülle Samsung S21 Ultra 5G

Druckbare Handyhülle für das Samsung S21 Ultra 5G Sollte mit TPU welches einen ashore von ca A85 gedruckt werden

Pobrania
298
Polubienia
23
Ocena
0
P
PrintablesSpartiak

Honor 90 Lite 5G ochranný obal - pouzdro

Tiskl jsem to na PLA, 0,2mm s podpěry všude. Opatrně při odstraňování podpěr.

Pobrania
295
Polubienia
9
Ocena
0
P
PrintablesRoboprint3d

Dji mini 2, leichte Landefüße +35mm ca. 4,5gr

Landefüße DJI Mini 2 - Gewicht ca. 4,4 Gramm - Erhöhung ca. 35mm Hinweis: bei Montage Pfeile und Anlegefläche nach außen zeigend anbringen bis sie relativ fest sitzen

Pobrania
293
Polubienia
26
Ocena
5
P

5.56 NATO/.223 Rem Ammo Can Label Stencils (55gr/77gr)

Two spray paint stencils for your 5.56/.223 Ammo Cans (or other storage containers)! - 55gr FMJ - 77gr FMJ More ammo can label stencils to come!

Pobrania
289
Polubienia
43
Ocena
5
P
PrintablesOxy

Motorola One 5G Ace Phone case

TPU .2mm layer height No supports needed

Pobrania
281
Polubienia
9
Ocena
5
P
Printablesdarken

Lenovo ThinkCentre M920q - Slot-cover/baffle for 2.5GbE RJ45

M920q cover for a 2.5gbe A+E keyed RTL8125B adapter. Probably also fits other Lenovo ThinkCentre variants

Pobrania
276
Polubienia
31
Ocena
5
P
PrintablesAdrien

Prusa to Super Lube 85g greasing cap adapter

This adapter allows the Prusa lubricant bearing pacifier included with Prusa printers to be attached to a 85g tube of Super Lube. Recommended settings: PETG 0.15 mm 15% infill

Pobrania
275
Polubienia
41
Ocena
4,75
P

Galaxy S21 Ultra 5G Case

A case I made for my S21 Ultra... I made the back blank so you can emboss any design you want on the back. Print Settings Printer: Ender 5 Plus Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Ramberry TPU Black Category:…

Pobrania
271
Polubienia
20
Ocena
4
P
PrintablesChris Heinonen

Ubiquiti Unifi USW-Flex-Mini 2.5G 5 10-inch rack mount remix with Keystone Jack, USB-C pass-through

I took the existing model and added a hole that fits the USB-C power connector and a keystone jack to clean up how it looks in my rack. Keystone is very useful for passing Ethernet back to another device, in my case my Eero router that's…

Pobrania
266
Polubienia
31
Ocena
0
P
Printablesmoi

Oneplus Nord CE 5G Case

NOTE : Camera isn't protected No supports required Minimum 2 walls I am kinda new to 3d modelling, this model isn't perfect, but works perfectly for me, I included as well the .f3d file

Pobrania
264
Polubienia
4
Ocena
5
P
Printablesbullitt168

Omada Fusion 2.5G Rack Mount (19-inch + 10-inch)

A rack mount for the TP-Link Omada Fusion 2.5G Gateway , available in two versions: 10"-version works standalone 19"-version designed to integrate with @Mixmeister’s modular rack mount system is intended to be paired with another…

Pobrania
262
Polubienia
9
Ocena
0
P
Printableszrail

HP Flex IO V1 Bracket for 2.5Gbe m.2 Network Card

A while back I bought an HP Elitedesk 800 G3 mini to serve as my primary home server. A little bit later I decided to try to put a 2.5Gbe network card in, so I ordered one (aliexpress or Amazon keywords: a+e key m.2 2.5gbe RTL8125B) and…

Pobrania
261
Polubienia
28
Ocena
0

HP EliteDesk/ProDesk Mini Flex 2 2.5Gb Ethernet Bracket

This works with HP EliteDesk and ProDesk G6 (and possibly G9?) Mini systems. It replaces the blank panel on the Flex IO 2 Port and let's you mount an ethernet adapter. It might work with other Ethernet adapters, but I've only tested it…

Pobrania
260
Polubienia
46
Ocena
5
P
Printablesxfalax

Case for Samsung Galaxy S10 5G

Case for Samsunf Galaxy S10 5G

Pobrania
258
Polubienia
12
Ocena
0
P
PrintablesNikita Che

Creality K1 belt clamp maximum reinforced 2GT and 1.5GT

Creality K1 belt clamps. Added as much material and strength in this tiny part as possible. Print in ABS/ASA-CF/GF or HT-PLA-GF or PPA-CF, 0.2 layer height, 3 perimeters, 100% infill. Holes are 2.8mm - slightly undersized for better…

Pobrania
256
Polubienia
23
Ocena
0
P
PrintablesRedAura

Galaxy S21 5G PETG Case

I have added a cut-out for the microphone, which is located at the top of the frame. PETG can be a bit slippery, so my tip: print it on a rough PEI spring steel plate. This way I was able to create a fabric-like feel. Feel free to leave a…

Pobrania
252
Polubienia
13
Ocena
4,67
P
PrintablesDesignBot

10 inch rack for ZimaBlade with PCIe 2.5G ports

This is my customized 10-inch rack mount for the ZimaBlade. I kept the original black metal heatsink module from the ZimaBlade. Since my home network runs at 2.5G, I added a PCIe network card. Because I also added a 2.5” hard drive mount,…

Pobrania
251
Polubienia
25
Ocena
4,5
P
PrintablesIglou.eu

Bumper Case for Oneplus Nord 5G, OnePlus 8 NORD 5G, OnePlus Z

– EN -- This shell provides a full coverage. You need to print it with TPU and a printing cooling fan. There is two model of Oneplus Nord 5g, this one is the none jack output. My reference model is my new AC2003, and this website :…

Pobrania
247
Polubienia
14
Ocena
5
P
PrintablesKubiczek
Pobrania
242
Polubienia
9
Ocena
4
P
PrintablesLuke Macmenamie

magnetic phone case for motorola g stylus 5g 2023.

I used high speed tpu from overture but regular tpu works fine for the magnets the model is made to use 60x10x3 mm magnets but feel free to edit the model. And if you want a harder case increase the infill or if you want a squishy phone…

Pobrania
240
Polubienia
8
Ocena
5
P
PrintablesFinsonian

Case for Galaxy A53 5G

The fruits of my longest labours so far. The first model I've made from scratch, and my first contribution anywhere. Heavily inspired by a similar model: https://www.printables.com/model/187430-galaxy-a53-case. So far I'm pretty happy…

Pobrania
239
Polubienia
11
Ocena
0
P
PrintablesŁukasz Dudek

(UPDATED) Xiaomi redmi note 10 5G case

TPU filament is recommended Stiff filaments may damage the case during assembly. UPDATE: I created new better model. Better fit, now you can print with PETG. Tested - showed on photos. ( The holes don't look very good because it was a…

Pobrania
236
Polubienia
7
Ocena
0
P
PrintablesHarjeeth4444

Xiaomi Redmi 13 5G Phone Case V4

Can be printed in any tough material (PLA, PETG). Sand or melt the excess flange to ensure a perfect fit. V4 Update: All holes align pretty much perfectly!

Pobrania
236
Polubienia
7
Ocena
5
P
PrintablesBen

2.5G Ethernet adapter bracket for Optiplex Micro 7050

Installs into the secondary display port, just above the built-in network and USB ports. Requires: 4x M3x4x5 heat-set inserts 2x M3x8mm countersunk screws Also uses 2 screws removed from the original metal bracket Potentially worth…

Pobrania
234
Polubienia
25
Ocena
5

Samsung Galaxy A52-5G

Samsung Galaxy A52-5G case

Pobrania
234
Polubienia
8
Ocena
0