Wyniki wyszukiwania: 64mm

Sortowanie

Liczymy pasujące modele…

Drag Chain for CNC, two-piece, snap-open, 64mm radius, choose from two sizes: A=20x40mm, B=dual tracks, 20x26mm each (v1.14)

UPDATE April 23-24, 2024 — Remodeled how the retainer clip is attached, to get better grip strength. This involved a remix of both the chain link and the clip. Version 1.14 and up has this. Also, added two new sets. Original was renamed…

Pobrania
2856
Polubienia
336
Ocena
4,91
P
PrintablesAndrius

Audi wheel center hub cap 56/64mm

Printed with PETG at 0.10 mm layer height. So far held up for a year and still going strong. I used super glue to assemble. Epoxy glue or other strong adhesive will also work. The logo should press fit with some pressure but I advise to…

Pobrania
478
Polubienia
48
Ocena
0
P
Printablesrechn

Bikepacking Cargo Cage with 64mm mounts

Standard mounting holes for a fork bikepacking cage. If you enjoy this work, feel free to buy be a coffee! https://www.buymeacoffee.com/marleysoft

Pobrania
471
Polubienia
74
Ocena
5
P
PrintablesIanryeng

64mm Oil Filter Wrench

Needed an oil filter wrench for my Indian Chieftain. Reading online noted it was very difficult to find an actual 64mm wrench (most are 64.7 which is too big to remove the filter). Found garyfain's model but wanted something that I could…

Pobrania
454
Polubienia
42
Ocena
5
P
Printablesblackjackbender

2-1/2" - 63mm / 64mm Magnetic Dust Collection Connectors / Fittings

Inspired by the Robert Bieber magnetic dust collection fittings which I use in my shop. I needed something in the 2-½" variety and due the proximity of fittings on a couple tools using the original design was not viable so I created my…

Pobrania
392
Polubienia
54
Ocena
5
P
PrintablesmoWerk

ALUTEC Wheel Center Rim Hub Cap 64mm | Blank and Mercedes

Center cap for ALUTEC wheels. The originals are 63.8mm. This version is 64mm for a tighter fit. Choose from blank version to be customized or a provided Mercedes star Fit very tight but are easily removable due to small recess to enter…

Pobrania
318
Polubienia
27
Ocena
0
P
PrintablesRygar1432

Brushless WHOOP 65mm 24g or 64mm 21g!

Tired of the same old whoop frames breaking? Whatever your poison 1s or 2s, this should fit the bill. Yet Another rendition of my past designs. An actual whoop 64mm size with 31mm props and the latest brushless motors along with all the…

Pobrania
263
Polubienia
36
Ocena
0
P
PrintablesPhantomHeadache

EDF Housing for 64mm blades (64 / 64.5 / 65mm internal diamention)

EDF printed because the original one was a little bit too small Internal dimension is 65mm instead of 64 to prevent rubbing but I see some space between wall and propeller, so I think it can be lowered about 0.5 and still fit without…

Pobrania
261
Polubienia
22
Ocena
0
P
PrintablesEldarHan

Speaker Terminal Cup - 64mm x 22mm (84mm x 24,5mm total)

Optimized for Dayton Audio BPP Binding Posts

Pobrania
258
Polubienia
24
Ocena
0
P
Printablescjhagemeyer

3 axis thrust vectoring for 64mm edf

Was going to install on a plane, but didn't want to disassemble it to install. Its made for a 64mm edf but could most likely be scaled up or down for a larger or smaller edf. Will require 2 servos, I'd recommend at least 9g if using a…

Pobrania
248
Polubienia
14
Ocena
0
P
PrintablesLerslens

Watchmaker standard cleaning basket holder 64mm v1 suitable for ELMA machines

hi, I have just made this cleaning basket holder, it has already been through a few tests so far it is doing well. Long-term tests will follow. They should also fit Greiner machines, but I haven't tried them yet, which is why it's not…

Pobrania
220
Polubienia
34
Ocena
0
P
PrintablesH3dSprint

Spool winder for spools with bore Ø38mm up to Ø64mm

Part list spool winder: Conic plate (printed part / PETG) | quantity: 2 Threaded bar metric M10 | length: ≥100mm Hexagon nut (⎔17mm) | quantity: 4 Assembly instruction: Mount hexagon nut into each conic plate Turn hexagon nut to threaded…

Pobrania
193
Polubienia
34
Ocena
4,75
P
PrintablesParts Oven

GT2 Timing Belt 1164mm x 6mm Experiment

This little experiment was because I needed a 1164mm timing belt for a camera slider project. The belt is on order but is going to take about a week to get here so I designed a quick one to print so I can get this project going ASAP. I…

Pobrania
178
Polubienia
12
Ocena
0
P
PrintablesKen Mills

2020 Feet / Legs 64mm

Feet / legs for 2020 extrusions. These are 64mm high and 20mm square. Each foot only requires a single M4 bolt and t nut to attach.

Pobrania
174
Polubienia
25
Ocena
0
P
PrintablesMcMatt

Desk Cable Ports for 3"(64mm) holes (Ikea SIGNUM replacement)

I didn't like the gray cable ports that I got with my Ikea desk so designed these replacements. The main reason I wanted something different was the color but my design has a couple advantages over the original Ikea part. They are easier…

Pobrania
156
Polubienia
28
Ocena
5
P
Printablesradekrac

Cable gland - diameter 44mm/51mm/55mm/57mm/60mm/64mm/76mm

Cable gland to the work table. Diameter 44mm/51mm/55mm/57mm/60mm/64mm/76mm Board thickness 25mm and 40mm

Pobrania
146
Polubienia
16
Ocena
5

Dust Reducer Adapter for Ryobi RTS12 Table Saw - from 4" Dust Hose to 2.5" (64mm) dust port

Dust Reducer Adapter for Ryobi RTS12 Table Saw - from 4" Dust Hose to 2.5" (64mm) dust port. Prints with no supports needed. If you print with 0.3 layer height and 0.6 wall width, you can get a solid part with 2 outer walls right up…

Pobrania
132
Polubienia
15
Ocena
0
P
Printablesleoooo

Spool Spacer 64mm+ for AD5x

I remade the model by Andry Maltsev to be parameteric for spools with a larger ID than the original. Use the .f3d file in fusion to make different sizes or leave a comment and I can do it for you. Modifying the parameters won't work for…

Pobrania
129
Polubienia
14
Ocena
5
P
PrintablesHoundpup Rc

Powerfun 64mm EDF Reference Model (Design & Sizing Aid)

This is a 3D reference model of the Powerfun 64mm Electric Ducted Fan (EDF) , created as a visual and sizing aid for use in CAD and RC aircraft design work. It is intended to help with layout planning, fitment checks, and general scaling…

Pobrania
112
Polubienia
4
Ocena
0
P
PrintablesRob65

64mm Spool Centering Cone for Filament Spool Switcher & Winder

This is made for the Filament Spool Switcher & Winder found at https://www.printables.com/pl/@Damian27/collections/1304611

Pobrania
110
Polubienia
6
Ocena
5

Dust Collection Adapter for SKIL 10-inch Worm Drive Table Saw, going from 2.5" (ID 64mm) to 2.25" (ID 57mm) v1.0

Connect a 2.5" hose fitting to the amazing SKIL 10" Worm Drive Table Saw 's 2.25" dust collection port. Prints with no supports. (v1.0) I suggest printing with these settings: Filament type: PLA (I used PLA+) Nozzle diameter: can be 0.4mm…

Pobrania
109
Polubienia
10
Ocena
0
P
PrintablesTheKrCrusher

Double 45° 64mm Picatinny Rail - Top Mounted

Please Note Before Printing This is my first ever creation, and I currently do not have a 3d printer available to test printing, so this model is considered experimental . I included a model with untested custom supports as well as f3d…

Pobrania
83
Polubienia
21
Ocena
0
P
PrintablesHobbybotics

Parametric Model Rocket Fin Alignment Tool 2.64mm

Customized version of http://www.thingiverse.com/thing:695599 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=695599 Instructions Using the following options: fin_width = 2.64 wall_thickness = 4 jig_height…

Pobrania
80
Polubienia
13
Ocena
0
P
Printableste.3D

64mm Lid

this 64mm lid fits a (german) cherry glass and prints without supports. measured glass opending outer diameter without the thread. had good results using PETG at variable layer heigh. does not seal the glass for liquid, maybe a print in…

Pobrania
77
Polubienia
3
Ocena
5

FORD Center Caps 64mm

Diameter is 64mm. It is meant to be printed in colour of your wheels and logo filled with colour of your choice.

Pobrania
75
Polubienia
6
Ocena
0
P
PrintablesPeatch

Mecanum Wheel 64mm V1

Only the body part needs support. Mirror the parts for the other orientation. I printed the tires out of TPU.

Pobrania
75
Polubienia
7
Ocena
0
P
PrintablesjustLayered

Lightweight Sunlu Spool Adapter (64mm - 54/50mm)

Adapter for Sunlu PETG spools that are 64mm.

Pobrania
67
Polubienia
11
Ocena
5
P
PrintablesAlessio

AeroPress Filter Paper Holder (64mm)

printed in 3DJAKE ecoPLA Matt Red using 3 perimeters, 15% infill and fuzzy skin (0.3mm thickness)

Pobrania
65
Polubienia
5
Ocena
0
P
PrintablesDrGarbinsky

64mm bladder wrench

If you have a bladder upgrade kit on your shock you may need this. These bladder upgrade kits can be hard to get off the shock body. Print this with 12 perimeters and 100% infill. I'd try CF-PC or some other technical material. I used PLA…

Pobrania
62
Polubienia
6
Ocena
0
P
PrintablesKazu-chan

Tool holder stick 64mm(scissors-tweezers) for REGAL fly tying vise

This tool holder is suitable for REGAL VISE (shaft diameter is 9.5mm) You adjust holder height by using spacer tube(20mm) ・2 square holes for scissors ・2 square holes for tweezers ・1 hole for vise shaft(dia.10mm) You can choose hole…

Pobrania
62
Polubienia
10
Ocena
5
P
PrintablesKazu-chan

Tool holder stick 64mm(bobbin) for REGAL fly tying vise

This tool holder is suitable for REGAL VISE (shaft diameter is 9.5mm) You adjust holder height by using spacer tube(20mm) ・2 shaft for bobbin ・1 hole for vise shaft(dia.10mm)

Pobrania
62
Polubienia
12
Ocena
5
P
PrintablesTomi Pohjamo

FMS Futura 64mm EDF, front landing gear support

This printed part helps you landing with FMS Futura 64mm edf. Front landing gear stay straight also in hard landings. Looks nice:-) Use rubber liquid glue to attach, its great! Shoegoo, Bison or similar Good material: ABS or Petg, Tpu and…

Pobrania
59
Polubienia
2
Ocena
5
P
PrintablesPhantomHeadache

64mm EDF thrust tube to 50-57mm

Strongly connected to EDF Housing model: https://www.printables.com/model/578828-edf-housing-for-64mm-blades-64-645-65mm-internal-d and QF2822 engine (linked there) Number on the end of the file name is a diameter on the end of the tube

Pobrania
56
Polubienia
2
Ocena
0
P
PrintablesKazu-chan

Tool holder stick 64mm for REGAL fly tying vise

This tool holder is suitable for REGAL VISE (shaft diameter is 9.5mm) You adjust holder height by using spacer tube(20mm) ・3 holes(dia.4mm and square) for bobbin holders ・2 holes(dia. 5mm) for other tools ・8 holes(dia. 3mm)for other tools…

Pobrania
55
Polubienia
6
Ocena
0
P
Printableswavexx

Air trimmer for printer enclosure (64mm bore)

Keep your enclosure's temperature optimal using this (manual) air trimmer. Designed for a 64mm bore (press-fit). I placed two holes in the enclosure: one directly under the build plate (to avoid side drafts) and one on the side near the…

Pobrania
52
Polubienia
12
Ocena
0
P
PrintablesMintyHero

Stackable Craft Bins 127 x 127 x 64mm (5" x 5" x 2.52")

Stackable Craft Bins: 127 x 127 x 64mm (5" x 5" x 2.52") A great catch all for my 3d printing accessories, these craft bins are designed to be 5" square and stackable. Awesome for organizing craft supplies, market sale containers, and…

Pobrania
47
Polubienia
8
Ocena
0
P
PrintablesGrrr

Mazzer Mini/Jolly 64mm SSP Lab Sweet Burrs Centering Ring

This is a centering tool that can be used on both sides. First plugged via the inner hole on the motor axis for the bottom spinning burr. Secondly on the other side narrower outer surface into the hole of the aluminium frame holding the…

Pobrania
46
Polubienia
3
Ocena
0
P
PrintablesDi-Jo Heemskerk

Gridfinity 2x3 hole saw 64mm

store your hole saw in a need and compact way Seems like the Dutch gamma version is the same

Pobrania
42
Polubienia
8
Ocena
0
P
PrintablesEASY print

64mm pipe 90

this is for my dust collection system in my shop

Pobrania
40
Polubienia
4
Ocena
0
P
Printablespynefox

1.6" (40.64mm) PVC tube connector

Made with PLA, use supports. Any layer height can be done, Z-axis tolerances do not matter

Pobrania
33
Polubienia
8
Ocena
0
P
Printablesgminnick

Hose Adapter_2.5inch(64mm) OD to 2.28(58mm) OD

Hose Adapter_2.5inch(64mm) OD to 2.28(58mm) OD and 3.5"(90mm) tall Works for connecting a 2.5"(64mm) Hose to the Dust Deputy with a 2.28"(58mm) inlet. Their instructions list the inlet ID as 2 5/16 (58mm) but 5/16 is really .231 which is…

Pobrania
32
Polubienia
2
Ocena
0
P
PrintablesFarfro

58mm Dosing Cup Holder for Shardor Professional 64mm Grinder

I am not using the cup that came with the grinder as it does not work well with the 58mm portafilter so I designed a holder for the generic 58mm dosing cup. It can be adjusted up and down slightly. For version 7 an allen wrench with a…

Pobrania
28
Polubienia
3
Ocena
0
P
PrintablesSwitchPrint

Freewing LED Afterburner Mount for 64mm EDF Outrunner (No-Screw, Channel Insert)

Most commercial kits are designed for larger inrunners, making secure and centered mounting difficult for the smaller 64mm unit. Key Dimensions: Outer Diameter (OD): 63 mm (Designed for a tight friction fit in the air duct) LED Inner…

Pobrania
26
Polubienia
1
Ocena
0
P
PrintablesXYZeross

Disková krytka bez loga 64mm/Wheel cover without logo 64mm

Stredová krytka ALU disku bez loga,priemer vnútorný 58mm / 64mm vonkajší.Plocha pre nalepenie emblému 64mm./ALU wheel center cap without logo, inner diameter 58mm / outer 64mm. Area for sticking the emblem 64mm.

Pobrania
26
Polubienia
2
Ocena
0
P
Printablesap2danyo

Shardor Professional 64mm Grinder Dosing Cup Holder

I didn't like how the dosing cup danced around the base when griding so I designed a small base plate to keep it in place centered under the grinds spout. Use the same hex socket cap screw that comes with the grinder for the portafilter…

Pobrania
25
Polubienia
2
Ocena
0
P
PrintablesGST

Kettenhemd gegen Dornen für Fahrradreifen der Größe 64mm Breite.

“Kettenhemd” zur Verteidigung des Fahrradschlauches gegen Brombeerdornen. Designed für die Breite 26cm, Montainbike. Zum einlegen zwischen Schlauch und Reifen, - ich hoffe meine Platten sind dann seltener!

Pobrania
24
Polubienia
2
Ocena
0
P
Printables3uDo

Abdeckung für Kabelloch D64mm | Cover for cable hole D64mm

Musste einen Verteiler durch eine Holzplatte führen und wollte dann das Loch wieder abdecken. Had to run a manifold through a wooden panel and then wanted to cover the hole again.

Pobrania
23
Polubienia
2
Ocena
0
P
PrintablesDockGuy

Snap together Case for 24V/12V -> 5V USB Buck converter PCB [64mm x 28mm]

Works with generic 12-24V -> 5V @3-6amp buck converters with PCB size of 64mm x 28mm and up to 12mm tall such as this one: https://amzn.to/4xDOHAS Print in ASA or ABS for automotive use. PETG is probably OK too.

Pobrania
23
Polubienia
3
Ocena
5
P
Printablesbrass_ring

7X64mm Stacking Loading Block

7X64mm stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

Pobrania
22
Polubienia
0
Ocena
0
P
PrintablesAnson Liu

IKEA KNOPPÄNG 24"x35.75" (64mmx94mm) Frame Stand

End caps and middle support stands to hold a picture frame upright. Made to fit frames with a depth of 25mm.

Pobrania
22
Polubienia
1
Ocena
0
P
PrintablesLars

Deskhole 64mm

This is a deskhole part that fits perfect for the 64mm or 2 1/2" ikea fixxa holesaw. height fits the ikea table top "LINNMON".

Pobrania
21
Polubienia
1
Ocena
0
P
PrintablesJonas_sa

Seifenspenderhalter Durchmesser: 64mm

Einfacher Seifenspenderhalter

Pobrania
21
Polubienia
6
Ocena
0
P
PrintablesLawzy

FMS Futura 64mm EDF Speed Nozzle (Performance Accessory)

This is a light weight exhaust nozzle modification for the FMS Futura 64 mm EDF jet intended as a speed optimisation, not a thrust modification. The stock outlet on the Futura is approximately 58 mm. These designs reduce the exit diameter…

Pobrania
20
Polubienia
2
Ocena
5
P
PrintablesJiří Šmíd

cover/holder EDF 64mm QX-motor

EDF 50mm QX-model blower holder / cover used in my RQ-170 drone inspired flying wing

Pobrania
19
Polubienia
1
Ocena
0
P
PrintablesCartridge_Man
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
17
Polubienia
3
Ocena
0
P
Printablesbrass_ring

7X64mm Vase Mode Stacking Loading Block

7X64mm Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

Pobrania
17
Polubienia
1
Ocena
0
P
PrintablesChristophe_C

Ventilation Grid 64mm Voronoi

Voronoi design Ventilation Grid Diameter 64mm (drilling hole) Outer diameter 73mm Thickness 12mm (9mm recessed) ------------------------------------ Grille de ventilation avec design Voronoi Diamètre 64mm (trou de perçage) Diamètre…

Pobrania
17
Polubienia
5
Ocena
0
P
PrintablesBattooKooppu

Cat Tree Scratcher Post Base Reinforcement 64mm Diameter

The scratcher post on my cat tree was getting a little wonky, since it's only secured by a single threaded shaft in the center of it. I decided to add some reinforcement to it, so my cat doesn't completely rip it off it's base. Designed…

Pobrania
17
Polubienia
3
Ocena
0
P
PrintablesYell

PAS Sensor BZ-10C to 64mm adapter

Mounts a BZ-10C to a 64 symmetrical bolt pattern on the drive wheel for hollowtech. For this BZ-10C https://s.click.aliexpress.com/e/_onhyE2f

Pobrania
16
Polubienia
1
Ocena
0

ventilator/blower/fan id=64mm,od=111mm

To replace a broken impellerto replace a broken impeller. Gaps of ≈ 1mm. the size has been changed, the outer diameter, the inner part has been removed.

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesJosh Hartmann

14-Flute 64mm Oil Filter Wrench

14-Flute 45mm Oil Filter Wrench Tested on my 2008 Toyota Camry. Car Compatibility Common size for: Toyota Lexus Scion Less common for: Mazda Nissan Infinity Honda, Kawasaki, and Yamaha "powersport" vehicles Design Notes Short handle for…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesDu6hsue-

Garmin Edge Top Tube Mount (64mm)

This is a remix of the great model for the Garmin Edge mount. It is intended to use this to mount the Garmin Edge device (e.g. Explore 2) to the top tube of a bike. To reduce reflections and to make the screen a lot more readable, the…

Pobrania
11
Polubienia
3
Ocena
0
P
PrintablesCosmic Spool

Drawer Handle - Holes (3.5mm) 64mm apart

I created this handle to replace the original handle of a dresser. I have the FreeCAD file with parameters for size, hole distance and diameter, but I have to make sure I can share the *.FCStd file without leaking my local filesystem…

Pobrania
9
Polubienia
2
Ocena
0
P
PrintablesRazr

Coffee filter holder - 51mm round in 64mm round

一个51mm粉碗用咖啡滤纸的滤纸架,能放进64mm滤纸(爱乐压)的滤纸架(见图1)。 A coffee filter holder for 51mm round filter, that fits in a 64mm filter holder (e.g. accessory for Aeropress, see Fig.1.). 它现在的尺寸大约可以放下200片滤纸。 The current size will fit ~200 pieces of filter…

Pobrania
9
Polubienia
2
Ocena
0
P
PrintablesRobertoooo

64mm pipe adapter for Dalap vent air deflector

The Dalap 3163 vent air deflector inlet (see https://dalap.eu/distribution-elements/164-2971-pvc-disc-valves manufacturer site) is designed for pipes with internal diameter of 80mm, however, many heat recovery ventilation systems use…

Pobrania
8
Polubienia
2
Ocena
0
P
PrintablesErika Gili

RIO tuna can stacker 64mm

Tuna cans don't stack nicely, and it can also happen that for long periods tuna is not consumed at all, so I didn't want a bulky solution. I found this nice and slim design, but I needed to remix it to decrease the diameter for the cans…

Pobrania
8
Polubienia
0
Ocena
0
P
PrintablesSkabning

Raaco cabinet drawer insert - 150-01 64mm

Fits the 150-01 64mm wide drawers

Pobrania
8
Polubienia
1
Ocena
0
P
PrintablesSHOWTYS

Anemometer (64mm) Adapter 140mm x 140mm

Anemometer Adapter 140mm x 140mm Settings: 0.2mm layer 2 walls 15% infill No supports Filament: AURAPOL PLA-HT (you can use whatever you want)

Pobrania
5
Polubienia
1
Ocena
0
P
Printablesreemo3dp
Pobrania
4
Polubienia
0
Ocena
0
P
Printablesitalic

Burr Box - 64mm

If you've got multiple sets of burrs around awaiting use, you either have the original boxes or bubble wrap or a foam box (like the Zerno foam box) to hold them. I don't like keeping original boxes around; often they are bulky and end up…

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesAlturo Chen

64mm funnel

Top inner diameter: 64mm Bottom inner diameter: 12mm Top outer diameter: 70mm Bottom outer diameter: ~13.3mm

Pobrania
3
Polubienia
2
Ocena
0
P
Printables

FORD Center Caps 64mm

Diameter is 64mm. It is meant to be printed in colour of your wheels and logo filled with colour of your choice.

P
Printables

Drawer Handle - Holes (3.5mm) 64mm apart

I created this handle to replace the original handle of a dresser. I have the FreeCAD file with parameters for size, hole distance and diameter, but I have to make sure I can share the *.FCStd file without leaking my local filesystem…

P
Printables

Coffee filter holder - 51mm round in 64mm round

一个51mm粉碗用咖啡滤纸的滤纸架,能放进64mm滤纸(爱乐压)的滤纸架(见图1)。 A coffee filter holder for 51mm round filter, that fits in a 64mm filter holder (e.g. accessory for Aeropress, see Fig.1.). 它现在的尺寸大约可以放下200片滤纸。 The current size will fit ~200 pieces of filter…

P
Printables

Disková krytka bez loga 64mm/Wheel cover without logo 64mm

Stredová krytka ALU disku bez loga,priemer vnútorný 58mm / 64mm vonkajší.Plocha pre nalepenie emblému 64mm./ALU wheel center cap without logo, inner diameter 58mm / outer 64mm. Area for sticking the emblem 64mm.

P
Printables

Drag Chain for CNC, two-piece, snap-open, 64mm radius, choose from two sizes: A=20x40mm, B=dual tracks, 20x26mm each (v1.14)

UPDATE April 23-24, 2024 — Remodeled how the retainer clip is attached, to get better grip strength. This involved a remix of both the chain link and the clip. Version 1.14 and up has this. Also, added two new sets. Original was renamed…

P
Printables

2-1/2" - 63mm / 64mm Magnetic Dust Collection Connectors / Fittings

Inspired by the Robert Bieber magnetic dust collection fittings which I use in my shop. I needed something in the 2-½" variety and due the proximity of fittings on a couple tools using the original design was not viable so I created my…

P
Printables

7X64mm, Recessed Spring Latch Modular Ammo Box

These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…

P
Printables

64mm oil filter wrench for Mazda, Honda

I added the detents in the socket opening so my quick-release wrench would hold better. Clearance on my car is awkward and this made it stop falling off the wrench when I went to reposition. Printed with ‘fuzzy skin" to improve grip when…

P
Printables

7X64mm, Spring Latch, Snap Hinge Modular Ammo Box

This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…

P
Printables

7X64mm, Snap Latch, Snap Hinge Modular Ammo Box

This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…

P
Printables

7X64mm, Double Spring Latch, Snap Hinge Modular Ammo Box

This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…

P
PrintablesTrafton

Ventus 64mm EDF Jet

Ventus 64mm EDF Jet By Zephyr Dynamics Experience the pinnacle of precision engineering with the Ventus 64mm EDF Jet. Designed for advanced pilots and enthusiasts, this high-performance model combines sleek aerodynamics, modular assembly,…

Polubienia
18
Ocena
0
P
PrintablesTrafton

Thrust Vector Unit for Ventus 64mm Jet

VENTUS 64MM THRUST VECTORING ADD-ON Elevate your Ventus 64mm EDF jet with this optional thrust vectoring upgrade by Zephyr Dynamics . Designed for advanced performance, this add-on delivers enhanced maneuverability and precision, making…

Polubienia
13
Ocena
0
P
Printables

7X64mm, Double Snap Latch, Snap Hinge Modular Ammo Box

This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…

P
Printables

64mm Oil filter wrench

64mm Oil filter wrench

P
Printables

Simple Tote Tray 170x110x64mm

This trey is very nice for storing my stuff in my wooden drawers. But they are also nice a s general tote or tray. With this size you can print on a smaller printer with no supports. One Note : The sides are at a slight angle of 2°…

P
Printables

64mm Sprout Lid & Stand

this 64mm lid fits a (german) cherry glass and prints without supports. measured glass opending outer diameter without the thread. had good results using PETG at variable layer height. can be used like other (commercial) sprout…

P
Printables

Handle (64mm/96mm/128mm/160mm)

Standard size hole spacing. 3 mm diameter hole.

P
Printables

Deckel für ESP Cam an 64mm Wasserzähler

Deckel für ESP32Cam als Aufsatz für einen Wasserzähler mit einem Durchmesser von 64mm. Die Röhre für den Abstand der Kamera zum Zähler wird aus einem dickeren Papier (160g/m²) ausgeführt.

P
Printables

7X64mm, Pocket Spring Latch Modular Ammo Box

This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…

P
Printables

7X64mm, Pocket Snap Latch Modular Ammo Box

This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…

P
Printables

7X64mm, Double Latch Modular Ammo Box

Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Flex Latch…

P
Printables

7X64mm, Double Snap Latch, PIP Hinge Modular Ammo Box

The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…

P
Printablesbrass_ring

7X64mm, Double Spring/Snap Latch, PIP Hinge Modular Ammo Box

This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in…

Polubienia
1
Ocena
0
P
Printables

7X64mm, Spring Latch, PIP Hinge Modular Ammo Box

Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Spring Latch…

P
Printables

7X64mm, Snap Latch, PIP Hinge Modular Ammo Box

The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…

P
Printables

64MM EDF RC mount

64MM EDF RC mount. Can be used on a thrust tester. Or added to a front of an RC plane. Print Settings Rafts: No Supports: Yes Resolution: 200 Filament: ESUN PLA or PETG Category: R/C Vehicles

P
Printablesbrass_ring

7X64mm, Recessed Spring Latch Modular Ammo Box

These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…

Polubienia
0
Ocena
0