164 modeli
This design is an 1/8 scale model and will compliment my design of the Brewster Bomb Rack of WW2 used primarily in the Pacific Theater by U.S. Marine Corp aviation units flying the early F4u Corsairs. You will need to purchase 2 sizes of…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Intel NUC Rackmount Kit for 10" server cabinets. The NUC is attached to the cage using two VESA mounting screws on the bottom. Alternatively, it can be fixed with a velcro strap. The front plate has 6 connectors, in which a keystone…
Wydruk około 3,10 €–3,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple adapter from 3/8ths inch Microphone stand thread to the three-prong mount system used on GoPro and similar Action camera accessories. Printed in Prusament PETG black.
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my first model of a Naval Canon made in and around thw 18th Century. I used reference images in order to make this, and this is my first attempt at doing so in Blender. I would have liked to put wooden textures on to the frames,…
Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu
This is my take on a crawler teeter totter, using no nuts or bolts, just a bit of CA glue (superglue) or other glue you have that connects printed parts together. All you need to do is print 5 parts, and glue 2 of them together any you're…
Some whoops that can be made as long or short as you want them to be. The ends are reversible, and you can add as many middle sections between them as you need. They have holes to add the connectors in to help keep the pieces from moving…
This is the customizable bridge for 1/18th and 1/24th scale crawlers, like the TRX4M and SCX24. There are 3 bridge support sizes, 50mm,100mm, and 150mm. Each bridge support comes in 2 variants, flared base, and stackable. The stackable…
John Deere 4020 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A single M1x6mm screw…
Just print in whatever filament you want and prefer. Can be printed without supports easely.
Rotating Rc car stand built for the Arrma notorious but also works my infraction and other 1/8th scale RC cars. Segmented parts tray incorporated into base. Uses standard skateboard bearing for turn table. Printed in PLA with 100% infill…
This is a set of small bridge "planks" that can be printed to make a bridge any size you want. All of the planks are wide enough for a 1/18th scale crawler and smaller. They have a 4mm passthrough hole for the "rope" sized to fit standard…
Don't have acces to a 3D printer ? You can purchase them here ! This is a 3d model of some Lego compatible F40 style rims to use on 1/8th scale cars, specifically on the Ferrari F40 by Loxlego , but they should work on other models like…
John Deere 3020 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A single M1x6mm screw…
John Deere 530 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 8.75in (6.4mm x 222mm) rod used for rear axle 4mm rod used for steering wheel (Used an M4 Screw…
UPDATE jan, 1st 2024: I made a much better Shock Stand: You might want to try this one in stead: https://www.printables.com/model/694740-updated-18th-110th-offroad-rc-shock-stand *********************************** I went from 1/10th to…
UPDATE jan, 1st 2024: I made a much better Shock Stand: You might want to try this one in stead: https://www.printables.com/model/694740-updated-18th-110th-offroad-rc-shock-stand *********************************** I went from 1/10th to…
Update: Uploaded a new model of the 2.25 sander as well as new 1.125 sander. New models facilitate easier printing. A sanding block that perfectly fits a 1/8 sheet of 9x11in sand paper. Tear the sand paper sheet in half the short ways.…
Case 930 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 8.875in (6.4mm x 255.4mm) rod used for rear axle M2 rod used for steering wheel
3/8th BSP plug to neaten up buzz bars or bank sticks. I uploaded the step file so it can be modified to suit the diameter of your buzz bars for a nice flush fit. The stl has a 20mm head which was perfect for my buzz bars.
Just like dad/grandpa had at the farm growing up. This 1:8th scale tractor is sure to be a show stopper on your display or shelf. Uses M4 and M2 Screws
I modeled this for my wife who wanted a way of displaying the Quill Pen that we purchased a souvenir after watching Hamilton on stage for the first time. Since it is a quill pen, I thought it only right to use an Inkwell for holding said…
Cake topper created for someone's 18th birthday. Model size is ~215x140x2mm but can be resized in your slicer. Prints perfect in PLA, and i usually use 100% infill since it's only 2mm thick. You can fit 2 pieces on one Prusa Plate Should…
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D Surprise someone special with a 3D printed bouquet that never wilts! 🌷🌹 Whether it's for International Women's Day, a birthday, or just to…
Original Idea: https://www.printables.com/model/1162678-valentines-mothers-day-mama-rose Many thanks to : https://www.printables.com/@Drak
Needed way to mount iPad to Sim Rig. Main use case is to use iPad as MCDU in Flight Sims. Found great wallmount from Bear_Grills and used it as base of this work. iPad slides in pretty well and is securely hold down because of the angle…
Oliver 77 Row Crop - 1:8th Scale Assembly instructions in the download section Uses M4 and M2 Screws
Wall mount for an 8th gen iPad. Two print options: all in one, for bigger printers left and right separately
Tool to help with the installation of Shimano BB-R9100 and other similar sized 16 spline bottom brackets. I needed one for a 3/8th inch socket driver, so I remixed https://www.thingiverse.com/thing:3335307/ Printed with PolyMaker ASA…
I wanted to have a bit more space to mount electronics in my Xray XB8E 2022 buggy. I designed this battery tray which can be mounted with longer M4 bolts. The battery of “shorty”-size is held tight in place in a centre position, so not to…
IMHO best to print these (you need two) out of PETG as this is less brittle then PLA
Hi I built my Core One before @ooishoo published their screw organiser but it would have saved a lot of effort. So for the INDX FE build I was looking for an equivelent model, I made Core One INDX Conversion Kit Screw Organizer (for…
only requires four self-drilling screws easy to print on the small printers too! HAVE FUN!
Fontaine Renegade-Magnitude Trailer - 1:18th Scale Uses M4, M2, and M1 Screws Uses two 6.4mm (0.25in) x 120mm (4.75in) Rod for axles Need to make 24 Outrigger Parts
Transcraft Eagle Stepdeck Trailer - 1:18th Scale Uses M2 screws Uses two 6.4mm (0.25in) x 120mm (4.75in) Rod for axles Included in file are alternate tool boxes with diamond plate façade. Larger parts divided to fit on 400mm x 400mm print…
This is part of my SwarmBot build, details of which can be found at https://skippy.org.uk/swarmbot-introduction/ This is the Caster that I designed for the first version, it takes a 3/8th inch ball-bearing and makes it into a caster.…
Really, you shouldn't print this. Make it from cardboard or similar. I wanted to try and learn FreeCAD and use up some ancient filament, so figured “why not”. If you do want to print this, I'd suggest printing 4 with one side facing up…
10% infill works fine.
House inspired by house seen in Jewish ghetto in Trebic town in Czechia. Similar houses appeared all over Central Europe, from Germany to Poland. It is modelled based on 19th century look, but it can work both for earlier and later time -…
Got board so i made this wheel for my 1:8th R/C nitro car. Better to be printed with a raft as well as supports.
John Deere 4020 NFE (Narrow Front End) - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A…
I made this Wallmount for the iPad 7th gen. Should also fit 8th and 9th gen I made the fitment a bit tight so nobody could just pull it out. (still possible with force but be careful)
3x4 Downspout End with Cleanout and 9mm/3-8ths connector Remixed the 3x4 Downspout and merged to a 3d print file of a pill bottle. Scaled up, combined the spout end with pill bottle opening; combined the 3/8ths tube connector to the lid…
For 45lb power lifting/Olympic bars , or bars with 28mm+ shafts, use “Barbell rack holder - normal 29mm bar” For 15lb smaller/curl bars , use “Barbell rack holder - small curl bar.” The other mount will fit fine for these, but this one is…
Based on the remixed model but remade for better cookie cutter proportions. You'll still need to be careful with the stem. Disclaimer: While some 3D printing materials are technically safe for food contact you need to be careful with the…
Easy to print and put together. PLS DOWNLOAD and LIKE! THANK YOU FOR SUPPORTING ME IN MY ADVENTURE OF 3D MODELING! MRC.
John Deere 48 Front Loader - 1:8th Scale Made to fit the 3020 and 4020 tractors I have modeled. Uses M2 and M4 Screws. Indents indicate where holes need to be drilled out. Would love to see pictures of your makes!
Frankish Heavy-Armored Foot Soldier, Late 8th Century
Printed at 0.2 mm with 0.4 mm nozzle. Turn off detect thin walls in PrusaSlicer, otherwise the numbers will not be printed correctly. Numbers filled in with little bit of acrylic paint.
Clips that fit 4mm axles, used in an 1/8th offroad buggy ... but other will too. The clip provided has a thickness of 2 mm but can easely be scaled down or up by altering the Z-value in the used slicer. I use these in my Xray XB8E I…
Hello everyone! This is my remix of N8thin 's beautiful X-shot MPP Stock-ish Stock model. I loved the stylings and feel of their stock, but I wanted a version that was a little bit longer to fit me better. So, that's what I set out to…
I designed and printed these characters as a special gift for the Cub Scout pack ("Lobinhos") of the Grupo Escoteiro do Ar América 58/PR in Brazil. The Jungle Book characters are central to their program, so I wanted to create something…
my printer is probably over extrusing so there may bee some slack How to install : used cura hihi SETTINGS Filament : ABS or better, not PLA >:( Support : ON Infill : 100% !!!
Fits 1998-2001 Corolla (8th Gen) Washer Fluid bottle. Has tabs on each side to make pulling off easier. I printed this in ABS and used acetone to "glue" the symbol on.
I invented and fine-tuned this design 5 or 6 years ago. I made some tire-bolts for myself, but also provided some to RC-friends, to clubs who could sell them and earn a buck, … My friends are using them for years now. I usually share all…
John Deere 3020 NFE (Narrow Front End) - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A…
After struggling with commercially available Y shaped 3mm spacers, I decided to design these. The design is similar to others tile spacers but sized and configured for hex shaped tiles that need 1/8th inch spacing. With the Prusa SLA…
My bosch 6th series vacuum main brush has snapped. The part that allows it to rotate broke. I included the f3d file in case you want to make some improvements. I did my best to create some placeholders of some of the parts. The V1 had to…
I did not create this model. I just ripped it from the PS2 version of the game.
Made this for my daughterl. Used a couple files and mixed them together and made some modifications to create this. (Links will be provided below for originals.) printed in TPU at 215 and a speed of 20mm for all settings except travel on…
Replacement wing for Haiboxing 1/18th scale rc car, truck thing
John Deere Rear Wheel Weights - 1:8th Scale Uses M3 screws
The fit is very snug, so indeed that it should hold even when in a bag, I don’t know of the strain to the Pencil material. So be advised. Scale to 101 - 102% if to snug for you liking. Printed in PETG for good stability. 102% flow no fan…
Easy to print 2 files. Glue together the pieces. THANK YOU! MRC.
John Deere Front Slab Weights - 1:8th Scale Designed to fit on 1:8th Scale John Deere tractors produced by Scale Models. Uses M2 Screws to attached to tractor. Holes will need to be drilled and tapped on tractor.
Metric and SAE sets each have 9 sockets. I'm including the dimensions (outside diameter) of the socket set so you can be sure it will match before printing. The sockets are inset 10mm into the holders. Socket OD 10mm 16.8mm 11mm 16.8mm…
My first upload! Hope whoever prints it enjoys it as much as I did, the figure is 5cm tall and is perfect for modelling
Printed in ASA with 5 line thick walls. in alpha V1.1 uses 30mm upgraded mount for Starlink Gen3 mOunt by Rob lackie (can print both on 250MM^2 plate) V1.0 model leverages 1 5/8ths (~41mm) post unclegeek v3 mount working to validate this…
1:8th Scale International Harvester Rear Wheel Rims Four different files. No Wheel Weights Two Wheel Weights Four Wheel Weights Six Wheel Weights
During the Napoleonic Wars, British Army officers wore gorgets as a metal, crescent-shaped badge of rank suspended from the neck, symbolizing "on duty" status rather than providing protection. These items, typically made of gilt brass,…
Add an O-ring, #324 to the bottom the cap, too! Print in PCCF, PC, or PP for autoclavable.
The first installation of a cycliq camera will require quite a bit of force, in my experience. That rounds off the edges of the lock bumps. After that, it seems to be nice & firm I printed flat with a 0.6mm nozzle, no supports, 0.3mm…
IMPORTANT: there are 2 versions of cards in the "dog universe" the original cards that come with the game and "Dog Cards" cards which are about 3mm smaller in both directions, which can be used as spare cards if the original set is played…
International Harvester IH Rear Wheel Split Weights - 1:8th Scale Designed to fit 1:8th scale International Harvester tractors produced by Scale Models Uses M3 screws to attach to tractor. Holes will need drilled and tapped in the wheel…
this is a fridge is great for if you are going to make a overland set up for your mini rig! ENJOY! PLS DOWNLOAD TO HELP MY PROFILE GROW. THANKS!!
I've remixed the minimal CANVAS tophat with a 4-tube PTFE pass through. They allow for a tight pass through.
I really liked this stand and printed a few for myself and my friends. One of them requested I put shock holes in the body to hold during rebuilds, so that's what I did.
This is a picatinny to dovetail adaptor for mounting optics to whatever you have picatinny on. Feel free to judge my f360 files. All files are 50mm in length, if you want a dif size just send a comment. PRINT INSTRUCTIONS Print both the…
International Harvester IH Rear Wheel Weights - 1:8th Scale Designed to fit 1:8th scale International Harvester tractors produced by Scale Models Uses M3 screws to attach to tractor. Holes will need drilled and tapped in the wheel rims to…
Grab Bars for your Kindle Fire tablet. Finally, with this large tablet case, you can hold onto your tablet. You can hold it with your left hand or right hand or both hands. You can hold it portrait mode or landscape mode. If you have had…
18th Level Birthday Cake Topper
A model of an 18th century french chanteaux I made in tinkercad.
hard 1/18th scale rc car track
This is a clean 2D 3D-printable model of the Honda Civic Hatchback 8th generation (2006–2011), designed for fans of JDM and modern classics. The model can be used as a keychain, wall art, or just a cool display piece on your desk. It…
Unscrew the mic shock a little and insert this where the old stand insert goes and you're good to go
its always the 10mm best to print in titanium or stainless steel or some other exotic super material and pint like 50 of them
Decorative shoe buckles, meant to be attached to existing shoes to give them an 18th century aristocratic French Revolution vibe. Works well when attached to an elastic band worn around the shoe. You can also stitch them directly to the…
This is a servo arm for the 18th Scale OpenRC F1. It fits on the 3,7g cheap ebay servos. I used my soldering iron to quickly melt the inside of the hole and quickly pushed the servo arm onto the servo to get the teeth marks inside. After…
I have included the obj files if anybody wants to adjust it for there own needs. as this is my first remix it was made in tinkercad (still need to learn fusion 360) it is simple but functional. I printed it with the same settings I used…
Tired of dealing with a sagging sun visor? I've found a solution for you - a delete cover that fits for factory mounting hole perfectly.
1:8th Scale John Deere Heavy Cast Rear Wheel Rims
Farmall H Steel Wheel Set - 1:8th Scale Made to fit the Scale Models 1:8th Farmall H.
Easy to break the original part and unavailable the replacement at the moment. Print Setup: 0.2 layer height 0.4 nozzle ABS Put a piece of filament (about 10mm) and glue it into the small hole as you see on the second picture.
I Printed on an elegoo century carbon 2 Printed with a 0.4 mm nozzle Printed in Elegoo PETG - CF / Main Bed, Gooseneck, Backend, Wheels, Test Block Elegoo TPU 95A / Tiers, Mudflaps Elegoo Rapid PETG / Everything else Hardware 6 2M x 6mm…
This model is perfect for any cake. It can be customised and fitted to any size cake. The design is uniform and designed to be scaled up and down to fit all cake sizes. Print with a 0.2 layer height. It can easily be sprayed painted, as…
This is one of my brackets for my Cycliq cameras. Mount style ‘C’ refers to the bolt counterbored straight down from the mount face, and with the locating pyramid/pin hole. Designed for an M4x20 SHCS This bracket can be used with my…
Lengths: 10mm Hexhead - 16mm 1" - 8mm 1/8"
I designed those brackets to do the sunroof delete on my 8th Gen Civic Si sedan. The brackets are made for a 1/8-inch ABS sheet. There are 3 variations of my design. Front, side, and rear. All the brackets are designed to use an m5 bolt…
Testing out some experimental parts for the 18th Scale OpenRC F1. These parts are not yet intended for general use. The may not work properly or even print properly. Use them at your own risk. Category: Vehicles
![[OLD] 1/8th 1/10th offroad RC shock stand](https://media.printables.com/media/prints/45948/images/456918_4cc12716-beb6-45b0-abb9-2851c64e2d02/large_display_img_0624_45948.jpg)
![[OLD] 1/8th 1/10th offroad RC shock stand](https://media.printables.com/media/prints/34737/images/343226_9b9466f3-bb6b-4da5-a50f-75003b8de8e9/img_0625.jpg)
![Starlink V3 [30mm] & [1 5/8ths (~41mm)] wall mount for fence](https://media.printables.com/media/prints/c2fdbff4-6dd9-4fa7-994d-9a250545e74b/images/10597901_b387d8c1-0931-4266-9be5-a1772ab21d4b_1b22638d-e4e4-4101-96cf-2f0f5c7435e5/screenshot-2025-09-03-at-100725-am.png)
