Ikea Dagotto feet
Simply print 4 of them, snap them and profit :-)
- Pobrania
- 52
- Polubienia
- 6
- Ocena
- 4,5
160 modeli
Simply print 4 of them, snap them and profit :-)
The rubber tubes used by Ikea slides off, and the whole legrest is a bit low for me. This print fits the pipes of the legrest, and 4 felt pads from Ikea can be glued on. The pipes of the legrest are a bit wobly, so some glue or…
19 Mar 25 - Added a new looped version that's much sturdier than previous models. Also changed the latch so the hinge was coaxial to the fillet. Overall, a more refined model than any of the previous iterations. 8 May 24 - Added beefy…
Backpack coming soon. Works with the original Dummy 13 frame. Two armor sets for the arms. Material Frame ABS/ASA/PETG Armor Any Layer Height First Layer .2 Other Layers .15 Infill 20% Gyroid First Layer Speed 25% of Default Elephant Foot…
This is a remix of "Waveshare display (v1/v2) with a PiSugar 1200mAh battery and a carabiner loop" to support the PiSugar2 1200mAh (switched USB charging port/button, and added a slot for the power switch). I made the case and lid a…
Standard pwnagotchi case Build your own pwnagotchi!!! instructions here: https://youtu.be/Gw4yCRKLn3Y Checkout case overview video here: https://youtu.be/KD7heRy_vDg Checkout the how Pwnagotchi build series playlist on my channel page:…
Dragotaur Baby This little Dragon can be printed down to 60% and fit in your hand. Dragotaur looks like a bull, dragon, and a bird mixed. When I was making it I just went with it and loved how it turned out. 10% infill 3 to 4 lines .1 or…
My case for slim edition of Pwnagotchi.
The cases in the original only had versions for the Pi Sugar v1. The V2 has both a switch and a button. I rejigged the case based on both this and the Pi Sugar cases (purely used to get the hole locations correct) and updated the buttons…
Mithilfe vom WagoTower, gehören quer verteilte Wago Klemmen im Werkzeugkoffer der Vergangenheit an. Mit diesem Spender können bis zu 11 Klemmen platzsparend aufgenommen werden. Durch den Hebel an der Oberseite können diese handlich mit…
It's the sword from the kazuha's quest.
Features: USB C charging port 2 buttons (need tolerance check when printing) side hook perfect fit for the display perfect fit for the battery + the magnet mount to the Pisugar 3 the lid is a tight fit but it has 2 holes for easy removal…
I designed this case for the Geekworm X306 UPS shield. It provides constant power via a 18650 Li-Ion battery. You can plug and unplug the USB-C port on the back to charge the battery as needed, without interrupting the operation of the…
(⌐■_■) if you have the combination of an pwnagotchi based on the raspberry pi zero with the waveshare display, have an RTC installed and the UPS-Lite you want this case! i included STP and STL-Files let me know what you think!…
Here is the Tamagotchi case for Apple Watch 44mm, please scale it for easy assembly (I scaled 102.5% for my watch.) I used 5mm diameter, 2mm height neodium magnets inside. Hope you like it!
I designed my Pwnagotchi case around my build: Raspberry Pi 0 W Waveshare v2 with "slim-agotchi" low profile mod PiSugar power pack with 1200mAh battery It's a snug fit that exposes the USB ports while the cover is dovetailed and slides…
I created this case to encorporate the Waveshare V4 Epaper display, together with the UPS Lite V1.2/V1.3 and the Pi Zero or Zero 2w. The Dimensions of the case is WxDxH 75x25x36mm. It is smaller in all dimensions than a flipper zero with…
To have a good alignment the magnets need to be removed from the battery and the pisugar2. I added a version without pisugar and battery.
Simple as it sounds, just a basic bed. So your Tamagotchi isn't just rolling around on the Night stand. Easy Print, no supports.
Original: https://www.thingiverse.com/thing:3920904 Added slots for straps to carry it with a power bank attached and I also made the walls a bit thicker.
Material Frame ABS/ASA/PETG Armor Any Layer Height First Layer .15 Other Layers .15 Infill 20% Gyroid First Layer Speed 25% of Default Elephant Foot Compensation 0.15mm Supports None Additional Settings (Optional) Print External…
Remix to use the waveshare 2.13inch E-Ink display HAT. Print in place, not supports are needed.
Alternative Top Case for "Pwnagotchi case for Waveshare and Pi Sugar v2" You can find the Case and Buttons here: https://www.thingiverse.com/thing:4551538
This a remix of PantsManUK's remix. The original carabiner loop was a bit choppy when trying to send off to 3D Printing Services like PCBWay, so I fixed that. Also, the NEW_LID file is actually done by formlessform @formlessform_1988521…
If you use a UPS-Lite and a Waveshare 2.13" e-Paper pHAT with your Pwnagotchi this is the case for you
Enjoying the rerelease of the Tamagotchi Connection? Or do you have a classic one? Either way: with this Tamagotchi Connection Stand, you have a place on your desk for your Tama so you can always keep an eye on the little critter.…
Be careful, this case has tight tolerances! (Remove the SD card before putting your pwnagotchi in!) You will have to slightly flex the side where the micro usb ports are to make your pwnagotchi fit. If you have any issues or need help…
Here is a Pwnagotchi case i made. It's to hold a waveshare V3 + PiSugar 2 + raspberry zero 1.
I've been working on making 3D models of every Tamagotchi case to come out. This is my first one. I plan on improving it or maybe someone else will. This is just what I have so far. This is taken from the model of Tamagotchi called the…
Malleus Draconia "Roaring Drago" Tamagotchi This special treasure took on some little water damage. Luckily Deuce is ace at electronic repairs. This prop is perfect for those who can't remember to feed a sprite every day. Just don't…
A super handy pwnagotchi - for your journeys in the city :D
Check out my newest Pwnagotchi case here This is a remix of the case for the pwnagotchi by soul_Stz. I adjusted the side of the case so that the WaveShare v4 can be inserted correctly with a Raspberry Pi Zero 2. I had the problem that the…
Pwnagotchi is an A2C-based “AI” powered by bettercap and running on a Raspberry Pi Zero W that learns from its surrounding WiFi environment site of full project: https://pwnagotchi.ai this is a pwnagotchi case with protective cover for…
This is a Tamagotchi-style keychain that doubles as a mini photo frame . The photo size is about 25 × 28 mm , and you’ll need to trim the corners round to fit inside. I printed mine in PLA with 0.99 extrusion —no supports needed, just…
Approximation of a Tamagotchi shape based on photos and rough measurements.
This design is a case for a Pwnagotchi build using: Raspberry Pi Zero 2WH Waveshare UPC HAT (C) Waveshare V4 2.13" E-ink Display HAT a MOLLE Strap like this one 8x 2.5x3.5mm screws It is designed to fit a non-slim variant of Pwnagotchi…
Imprimir como se pueda…no tengo settings, solouso las predefinidas para el modelo de creality ender 3 v2 neo
One of the best pwnagotchi case - edited to be openable in any program as I had similar problem mentioned in comments of original file. All credits to the original creator ! Thicc Dual Loop version (without letters) print as it is - in…
A foldable case for pwntagotchi that uses just the screws from the hat. Printed in PETG 2. mm layers standart settings. Show off your printbed design on allmost all sides! There ale more variants of the bottom part, you can use 4…
UPDATE: Added just the bottom plug so you can print and attach ANY gem or object. My daughter collects Tamagotchi's. Many of the P's are missing their original pierce that covers the plug at the top of the face. We designed this the best…
Pwnagotchi case with antenna slot and ring for a carabiner / snap hook Pwnagotchi project: https://pwnagotchi.ai/ Used parts besides the basic pwnagotchi setup: U.FL RF Port SMD (to connect an antenna to the pi zero) wifi Antenna SMA
Portachiavi Tamagotchi personalizzato.
This is a case for a Pwnagotchi that uses a Raspberry Pi Zero, PiSugar S battery, and Waveshare V4 E-Ink screen. Note: Once you put the SD Card in it is very hard to remove.
Using Ya Ikou's Pwn-In-Place case as inspiration, I designed a new variant from scratch. Built Specifically for this setup: Raspberry Pi Zero 2WH PiSugar3 2.13" E-Ink Display HAT V4 My perceived improvements over the original: Made loop…
Tested with a Pi Zero 2WH And Waveshare 2.13 inch V4 eink screen (supports Pi Zero WH, Waveshare v3 as well) Check out my Pwnagotchi guide and plugins too How to Use: First, remove the microSD card from the Pi Zero, then attach the pi…
To print this I used eSun PLA+ on my Ender 3 Pro. These are the settings I used: 0.2mm resolution 20% infill Normal supports everywhere I recommend printing the body of the case with the USB-A hole facing up. The top cover takes a bit of…
This remix is based on the fantastic Pwnagotchi case for Waveshare and Pi Sugar v2 by MrDrem This case is designed to work with: Raspberry Pi Zero 1/2 Waveshare V2/3/4 Pisugar3 I hope this variation is helpful to others in the community!…
Pwnagotchi case with or without external antenna 4xM3*20mm 4xM3nuts 4xtiny screws that came with the waveshare display
Case for Pwnagotchi - slimagotchi mode. The model should be placed vertically when printing. The side of the SD card on the bed. Everything is without supports. I used a 9mm spacer between the UPS and the Raspberry Pi. There are two…
I took a previously existing stl, made a Tamagotchi sized hole in it, and there ya go! https://www.youtube.com/watch?v=jNYN9snMMhU This new file labeled Tamagotchi Cradle has fixed how the front vents looked on R2. Category: Electronics
It prints flat, but easily snaps together.
This is a heavy remix of a case that I found on Thingiverse. Added a lot more holes and accesses for Pisugar 3 new buttons and LEDs, and Waveshare 4 e-ink panel. Also changed some tolerances and added some reliefs so the e-ink ribbon…
I printed it in .2mm layer height without supports, it went well on my printer. The model has a hole on the back to accomodate the heatsink.
Two simple display stands for the Tamagotchi Nano. One is a basic stand, and the other has grooves to help redirect the sound. (kind of)
Náhradní konektor pro listové hodiny Pragotron IPJ 0612, ICON 20 atd. Dutinky je možno získat ze starých PC zdrojů.
Use with Pi Zero W + PiSugar3 + Qi charger 2 different button sizes, print 2 per case Hardware: #6-32 hex cap screws, any length less than ¾" or 20mm will work Here's the original model if you need to make specific modification for your…
This is a case for a pwnagotchi made with a Raspberry Pi Zero/2W or similar SBC, a Waveshare 2.13" Touch ePaper, a Waveshare UPS-HAT, and an Alinan GT-U7 GPS Module and antenna. The GPS module goes underneath the UPS-HAT, and the GPS…
Check out my newest Pwnagotchi case here Very compact 3D printed case designed to works with: Raspberry Pi Zero WaveShare 2.13inch E-Ink Display HAT,250x122 Pixel Black 550 paracord (if using loop) Supports 3D printed Pico mounting…
With this adapter, you can send gifts and other data to a Tamagotchi Paradise. The adapter uses the CH340G Yellow variant, it's important to set it to 3.3 V mode! Case needs some supports, I recommend printing with PETG . PLA is too…
Made as a remix of Cyberpunk Pwnagotchi Case by kat_stuck_in_a_tree designed to accommodate: PiSugar S Battery, 5ghz USB antenna, RGB function indicator, DS3231 Hardware clock. Design is still a work and progress, I have not yet assembled…
Pwnagotchi case with molle clip on the back. This model has support for the clip included.
Be careful when printing the pin that it doesn't warp off the bed.
UPDATE added new improved side holes for the USB ports Two versions one that is solid, and another that has access to the USB ports, 2 ports for Raspberry Pi and 1 port for the PiSugar. Also two different lids one with ventilation and one…
A tamagotchi holder for most models. Pix and 4U are a slight to big and you need to scale it up by 10% atleast. Also doubles as a fun baby toy if you print it out in food safe material. My 10 month old liked the different textures and was…
Original model requires shorter spacers for the ups lite battery pack. In my pwnagotchi I am unable to install the shorter spacers as it causes the pi board to press on the battery and is very dangerous. There is heat etc. and the battery…
The original lid is about 1.5mm too deep (front to back), so I've cut that much out of the middle of it and merged the resulting parts. It now fits perfectly.
A simple 3D model for a Tamagotchi Uni case consists of two interlocking parts: a front shell with button and screen cutouts, and a back cover for protection. The design is lightweight and easy to assemble.
Slimagotchi case: Fits Pi 0W ( no header flush pins) with waveshare 2.13 screen Learn how to build a "slim" pwnagotchi here: https://youtu.be/rlTzREaGmII Checkout case overview video here: https://youtu.be/KD7heRy_vDg Checkout the how…
This is old (2018~2021) - I created this for the different pwnagotchi I gifted friends. They often times ran quite hot, which directly affected the performance. Rasberry Zero - Waveshare 2.13inch E-Paper Display HAT V4 Version 250x122…
Charger cover for your Apple Watch shaped like a Tamagotchi.
Check out my newest Pwnagotchi case here Fourteen versions of the case are included: Inky display. Inky display with a carabiner loop. Inky display slimagotchi mod. Inky display slimagotchi mod with a carabiner loop. Waveshare display…
Pwnagotchi Case with WeAct 2.9" ePaper Display "Sources" of the Model can be found on OnShape: https://cad.onshape.com/documents/172fee915b4cc3dc319ceb2f/w/33094c145713f3fa30397bbe/e/763a9c2fd96bd14b04fed502
The fuzzy skin settings for my print is: Fuzzy skin thickness: 0.2 Fuzzy skin point distance: 0.2
Case for pwnagotchi that can store on this order: Screen 2.13" e-Paper Display Hat V2 with slimagotchi mod (remove connector) Raspberry pi Zero WH UPS Lite V1.2 GPS Module GY-NEO8MV2 THe GPS module go on the back of the case and an open…
This is my version of the case for pwnagotchi. Waveshare V4 e-Ink display Raspberry Pi Zero W PiSugar 3 PLA with 0.28mm layer height. No supports. Use M2.5 screws 10mm or longer. Tolerances are pretty tight, but mine fits like a glove…
I wanted to have a frame between the E-Ink Display Hat and the Raspberry Pi for my pwnagotchi. I also use the PiSugar battery pack so I needed a version that would sit down over the screw heads. So I offer two versions: one with the pegs…
3D printable replacement battery door for the Tamagotchi connection. Print Settings Supports: For support enforcers only (See Additional Information below) Infill: 15% Brim: false Additional Information Notes Paint-on supports have been…
Fichas con dos lados, uno para marcar si la carta está preparada y el otro lado para cundo está agotada. Mejora la organización de la mesa al no tener que estar girando cartas todo el tiempo. Las diseñé para el Marvel Champins pero, al…
Same Case, but with a base to stand it upright and it will not turn off or on!
I designed a case for the pwnagotchi that uses a 2.13" e ink screen a raspberry pi zero w 2 a powerbank board and battery that all fits in a iPhone 13 case. Full info can be found at my blog post below Blog post -…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Small Notice I recommend adding some glue on the sides of bottom snap covers to keep the lid attached better to the main case. NEW AMS OPTION ON MAKERWORLD: https://makerworld.com/en/models/494603#profileId-408615 Components for…
Ricordo dei giochi più gettonati degli anni '90.
This will allow you to power up and down your Raspberry Pi Zero 2 W devices with the addition of a hot swappable battery. 6mm x 2mm magnets m2.5x6mm screws printer and a dream The parts I used are as follows Raspberry Pi Zero 2 W Screen:…
Tapon de desagote para ventana de aluminio
Removed clip and added some holes in the back for air flow.
This is a remix of Jeremy702's great non-low profile case. The main changes are to move the Micro SD-Card slot from one end to the other and to add an opening so you can access the ON/OFF switch on the PiSugar2 power board. Print Settings…
To install board may need to be tipped so the HDMI connector is inserted first. Clips may be tight. Print parts standing for best clip strength. Designed and printed at 3 wall 15% infill. Tested in PLA and PETG
This is easy installation stand for Pragotron IPJ 0612. No need any modification of clock, It's friendly to the original state! Just stick legs on the stand and screw the stand to the clock. 9.6.2022 update: added V2 stand to reduce the…
This is a grippy case for the Tamagotchi Uni, in variations with and without a carabiner, and held together with either zipties or threaded inserts. Design ideas The general idea is that the Uni is already pretty durable, being made out…
found my old Tamagotchi, added a new battery and had no pull tab to turn it off and save battery,, could have just used piece of plastic sheet but decided to add a little flair.
Case includes precise cutouts for USBs and SD card, as well as a mounting loop for attachment to bags or keyrings. 📦Hardware used in this build: 🧠 Raspberry Pi Zero WH ⏰ RTC Module : RTC Pi DS1307 - Real Time Clock Shield 🔋 Power…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
I wanted the stand to be tipped back a bit so I could see the screen while sitting at my desk. I printed this at 15% infill with supports on build plate only.
This dog tag is inspired by the old retro tamagotchi's and features a pixelated dog face and can be personalised with your own dogs name. The print is separated into individual parts that can be either printed separately and assembled or…
This is a flat assembly of the pwnagotchie. Requirements 4x m3 screws 6-10 mm raspberry pi zero pisugar v2 wave share epaper Assembly The 2.54 mm spacer goes on the GPIO pinheaded of the raspberry pi to get the correct distance. The…
The original rubber feet broke on my IKEA Dagotto. I printed the model designed by Axl_K, but on a hardwood floor it slid around. I recreated the design in OpenSCAD, and made the bottom part hollow, so I could insert a piece of rubber…