Liczymy pasujące modele…
Background This print file is an extensively modified remix of Arkon Lincoln SCX24 Beadlock Wide Rims on Thingiverse by CheapAZHobbies I used PrusaSlicer to scale, remove material, & correct the geometry so it could be used on my SCX24…
Wydruk około 4,12 €–5,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Some tweaking for the rim on add slot to have more grip inside the tire and make it bigger than the original for about 3mm so can get more tight i use the 1.9/107mm inch tires Hope this help Big Thanks for the 3d sets
Wydruk około 4,61 €–5,64 € nettoWstępna wycena jednego wariantu
Designed for GMADE MT-1902, but will probably fit variety of other tires. Rim diameter is 49mm and width is 30mm (+4mm with beadlocks installed). Hardware: 1x SHCS M3x16-25 through the center 21x SHCS M2x6-10 for beadlock 3x SHCS M2x6 for…
1.9" scale beadlock rims - Willys style (12mm hex) For each rim you need 5 M2 screws including nuts and one screw for fixing the front- and back- cover. Have fun. Print Settings Resolution: 0.1-0.3 Infill: 15-25% Filament material: PLA,…
2.2" Beadlock Wheel Rim for 1/10 RC Crawler Cars Fastening materials for one rims: M3x10 - 5pcs for rims M3 nut - 11pcs for rims and hex hub M3x12 - 6pcs for short hex hub (alternative M3x14 for long hex hub) M2x6 - 26pcs for ring screws…
2.2 RC Monster Truck Beadlock. 3 different offsets to fit a wide variety of models that use a standard 12mm hex. The truck pictured is an HPI Wheely King. These are specifically designed to fit JConcepts 2.2 tires, ie the Renegade Jr,…
A 1.9" 12mm hex RC rim that uses an internal beadlock design to clamp the tire to the rim. Print instructions Licence: Creative Commons - Attribution - Non-Commercial Category: R/C Vehicles Instructions Use support to print the main rim…
Inner Ring has been updated to make mounting substantially easier. Also the wheels are (and always were) compatible with Injora brass inner beadlock rings. Not to be confused with their inner wheel weights. [Rear wheel half has been…
Made some new shoes for my SCX10. 3 piece, used 10mm m3 screws to hold them together.
Beadlock wheel for TATRA 815VT 8x8 with tires from aliexpress. Aliexpress link: https://vi.aliexpress.com/item/1005005925269265.html? MLMODEL TATRA link: https://mlmodel.cz/produkt/tatra815-vt-8x8/
Koło 2.4 beadlock MAX TEAM
Hi, I desgined these Beadlock rim for my 1:12 scale project KamaZ 5350. To get a scale optic I decided to use the screws from the inside. The outher ring are 15x M2x16mm. The inner 10 srews ar more or less for the scale optic. 10x…
This is a lightweight 2.2 beadlock wheel which I made for my Bully 2 MOA crawler. The center portion is vented. To assemble you'll need a great deal of M3 screws, and a hub. I've printed it in PLA and PETG. It holds up to abuse pretty…
Beadlock Sunraysia style wheels to fit a WPL C24/C14. Uses M2*12mm hardware. v1 has more negative offset than stock, Fusion 360 file included if you want to modify the offset or use as a base for other beadlock designs. Print Settings…
I recommend to print it with 100% infill
My tire kept slipping on my rim with my Rancher wheels and Super Swamper tires. These rings help you "lock" the tire in place. There is also an option to use M3 nuts as weights — 48 per lock ring. Enjoy and post your makes! If you found…
Background ProLine’s 1/24 Hyrax tires currently only come pre-mounted on their plastic beadlocks. The wheel width is a little narrow for my taste and results in an egg shaped tire profile. When mounted to both styles of Treal beadlocks I…
A remix of the neat 1.9" 12mm hex RC rims that use an internal beadlock design to clamp the tire to the rim. Included are only my favorite bead ring as you can reuse the original ones if need be (go check out the original design, it's…
Should fit all Clodbuster 2.6" tires. Needs 96 m3x10 and an additional 24 m4x12 screws for the multi piece wheels. Stp files included for remix. Based on Drommond design from his Clodbuster and Axial chassis on Thingiverse. I just…
Issue at first run: tire pops out of the rim. I create this simple cylinder, in order to put it inside tire and lock it into the wheel when screwing the rim. (It press the tire between internal beadlock and rim). Not miraculous (still…
1.9 two tone beadlock crawler wheel for RC
Rings for the beadlocks can be found here https://www.printables.com/model/744137-bead-lock-ring-for-axial-scx10 https://www.printables.com/model/744136-axial-scx10-bead-lock-spyder-lock-19 1.9 Beadlock wheel for R/C car 12mm hex
I needed a better venting 2.2 wheel for some silicone foam inserts i made. I came up with these. I haven't had any issues with the outer “Tabs” of the bead rings yet. But I haven't ran them too much yet. Ive used PLA and also ASA for…
After making a set of functional beadlocks for stock tires I adapted them to fit the larger RC4WD tires. These work and fit like my previous beadlocks, and I've copy and pasted most of the assembly info down below incase you havent seen…
Felga pomniejszona do 1.9 cala plus oryginalny hex. Na razie jest to sam projekt. Jeszcze tego nie drukowałem i nie wiem czy bedzie pasować.
1.9 inch ZiŁ 157 beadlock rim Needed to complete the project 5x2 mm neodymium magnets to attach the cap 10 pcs M3x10mm (for each rim) aluminum insert for hex (I use 6mm.) HERE self-locking nut M3, 4 pcs (for each rim) PRINT settings…
Can be used for replacement or for color change from the boring grey. Printed one for test fit in petg. Included design if you want to remix. Added photos of ring printed in ABS with ironing and of the SBR with the rings installed.
Rings for the beadlocks can be found here https://www.printables.com/model/744137-bead-lock-ring-for-axial-scx10 https://www.printables.com/model/744136-axial-scx10-bead-lock-spyder-lock-19 1.9 Beadlock wheel for 12mm hex R/C vehicle.
1.9" RC Wheel Beadlock with 12mm Hex 1/10 wheel for rc crawler Axle diameter : 5 mm Hexagon diameter 12.3 mm (3d print tolerance) External diameter : 52.4 mm Width : 27.8 mm Screw DIN912 M2*6 - 6 pcs Screw ISO7380 M3*20 - 6 pcs Support :…
2.2 beadlock rims. Used in picture with 120mm tire. Print the two inner parts, no support needed, and join them with 4X M2x12 screws. Insert into tires ( compatible with my TPU insert V2 ), put the lip of the tire inside the hole, then…
This is a hub to retro-fit HobbySoul aluminum beadlock wheels to fit a 3dsets truck. This hub will fit the 8mm axle shaft perfectly and its adjusts the offset slightly + (closer to the car) so it will not rub. You will need to 6mm screws…
A 1/10 scale rim and tyre set compatible with standard 12mm hex hubs on RC cars. The tyres come in 3 different types, slick, paddle and trail and have been designed to be easy to print cleanly in TPU without supports (apart from the trail…
1.9" RC Wheel Beadlock with 12mm Hex 1/10 wheel for rc crawler Axle diameter : 5 mm Hexagon diameter 12.3 mm (3d print tolerance) External diameter : 52.4 mm Width : 29.8 mm Screw ISO7380 M3*20 - 12 pcs Support : no Raft : no Check out my…
1.9 Beadlock wheel 12mm hex. Uses Vanquish Products SLW style hub to mouth to hex. Modeled to match my Full size truck wheels. The file ending with BIS has a support structure already built up to support the print Category: R/C Vehicles
So I made the beadlock rings for the 3DSets rancher wheels to prevent tires from slipping of the rim. In addition, you can add 70g weights to each of the ring to lower the center of gravity. To add the extra weight, I used these Pb…
I created this beadlock disc for a 1:12 scale model of Tatra T815 VE You can use it on any similarly sized model. You can also remix the front of the disc to suit your application. It consists of: * outer disc * inner disc * locking ring…
I picked up these 1.55" wheels and tires from Amazon for 5 Euro and fell in love with look, but I wanted beadlock wheels instead of gluing the tires. I searched around and couldn't find any 1.55" wheels with a 5mm hex so I decided to take…
8 hole beadlock wheel for 12mm hex RC vehicle. Split into two pieces, thus no support required. However (5) M3x6mm screws are required to secure the back to the front. (12) M2x10mm for the rings. Rings for the wheel can be found here:…
!!!!!! WARNING!!!READ!!!!!! Be carefull when installing, tighten the first screws just a bit, then on the opposite end and so on. PLA bends and breaks easily, idk how petg reacts tho. I am not to blame if you brake it, i had no issues…
Gmade 5-Bolts Beadlock Spacers These are spacers you can bolt between the Hex Hub and Wheel to get more offset. 2, 3 and 4mm spacers published, if you need a particular size i can custom make it for you but be aware you will need longer…
beadlock disk pro mjx h12 deepdish. šrouby M2x10-12. podpěry ano. V případě zájmu můžu upravit offset a dodat další stl
For each wheel you need an inner , outer and ring part. To clamp the rim to the tire you need 9 screws, I use black 6mm M2 screws. You can print the inner and outer half on the narrow side.
Dirty Life Ring Spacer for 9302/9303/9304 - 17" - 24 bolt bead lock wheels, I printed in PETG, prusa,.stl,step,.3mf,.3dm file attached. .25" thick. I use 4 spacers per wheel with a Mickey Thompson Baja Pro XS 40X13.50-17LT C on the Dirty…
1.9" RC Wheel Beadlock with 12mm Hex 1/10 wheel for rc crawler Axle diameter : 5 mm Hexagon diameter 12.3 mm (3d print tolerance) External diameter : 52.4 mm Width : 27.8 mm Screw DIN 7380 M3*12 - 8 pcs Support : no Raft : no Check out my…
1.9" RC Wheel Beadlock with 12mm Hex 1/10 wheel for rc crawler Axle diameter : 5 mm Hexagon diameter 12.3 mm (3d print tolerance) External diameter : 52.4 mm Width : 27.8 mm Screw DIN 7380 M3*12 - 8 pcs Support : no Raft : no Check out my…
RC 1:10 Scale 2.2" Truck-Style Beadlock Wheel Set This is a highly detailed, modular 1:10 scale RC wheel designed for 2.2" tires (~62 mm outer diameter). The design is inspired by real heavy-duty truck wheels, featuring interchangeable…
1.9" RC Wheel Beadlock with 12mm Hex 1/10 wheel for rc crawler Axle diameter : 5 mm Hexagon diameter 12.3 mm (3d print tolerance) External diameter : 52.4 mm Width : 27.8 mm Screw DIN912 M2*6 - 5 pcs Screw ISO7380 M3*20 - 5 pcs Support :…
1.9" RC Wheel Beadlock with 12mm Hex 1/10 wheel for rc crawler Axle diameter : 5 mm Hexagon diameter 12.3 mm (3d print tolerance) External diameter : 52.4 mm Width : 27.8 mm Screw DIN 7380 M3*20 - 8 pcs Support : no Raft : no Check out my…
1.9" RC Wheel Beadlock with 12mm Hex 1/10 wheel for rc crawler Axle diameter : 5 mm Hexagon diameter 12.3 mm (3d print tolerance) External diameter : 52.4 mm Width : 27.8 mm Screw ISO7380 M3*20 - 9 pcs Check out my collection of wheels…
1.9" RC Wheel Beadlock with 12mm Hex 1/10 wheel for rc crawler Axle diameter : 5 mm Hexagon diameter 12.3 mm (3d print tolerance) External diameter : 52.4 mm Width : 27.8 mm Screw DIN 7380 M3*20 - 12 pcs Support : no Raft : no Check out…
R/C crawler 2.2 beadlock wheels. Designed to work with stock Axial Wraith hubs. (May also work with Vanquish hubs??) 5 part design which can be printed without supports. 2 outer beadlock ring face styles; flat or strengthened. 4 different…
needed to make new, old ones are blue ;-(
1.9" RC Wheel Beadlock with 12mm Hex 1/10 wheel for rc crawler Axle diameter : 5 mm Hexagon diameter 12.3 mm (3d print tolerance) External diameter : 52.4 mm Width : 27.8 mm Screw DIN 7380 M3*20 - 10 pcs Support : no Raft : no Check out…
Update 22.11.2025 i updated the file, i uploaded wrong one, opps. sorry!
Fix all the problems with fitting those tires
1.9" RC Wheel Beadlock with 12mm Hex 1/10 wheel for rc crawler Axle diameter : 5 mm Hexagon diameter 12.3 mm (3d print tolerance) External diameter : 52.4 mm Width : 27.8 mm Screw DIN 7380 M3*20 - 10 pcs Support : no Raft : no Check out…
1.9" RC Wheel Beadlock with 12mm Hex 1/10 wheel for rc crawler Axle diameter : 5 mm Hexagon diameter 12.3 mm (3d print tolerance) External diameter : 52.4 mm Width : 27.8 mm Screw DIN 7380 M3*20 - 8 pcs Support : no Raft : no Check out my…
1.9" RC Wheel Beadlock with 12mm Hex 1/10 wheel for rc crawler Axle diameter : 5 mm Hexagon diameter 12.3 mm (3d print tolerance) External diameter : 52.4 mm Width : 27.8 mm Screw DIN912 M2*6 - 5 pcs Screw ISO7380 M3*20 - 10 pcs Support :…
1.9" RC Wheel Beadlock with 12mm Hex 1/10 wheel for rc crawler Axle diameter : 5 mm Hexagon diameter 12.3 mm (3d print tolerance) External diameter : 52.4 mm Width : 27.8 mm Screw DIN912 M2*6 - 6 pcs Screw ISO7380 M3*20 - 6 pcs Support :…
1.9" RC Wheel Beadlock with 12mm Hex 1/10 wheel for rc crawler Axle diameter : 5 mm Hexagon diameter 12.3 mm (3d print tolerance) External diameter : 52.4 mm Width : 27.8 mm Screw DIN 7380 M3*20 - 10 pcs Support : no Raft : no Check out…
This is a beadlock rim inspired by the Black Rhino Armory rims ( https://www.blackrhinowheels.com/black-rhino-hard-alloys-armory ) for 2.2 rc tires. The rim is 33 mm wide and can be used with a wide range of SLW hubs (Injora, SSD, etc.).…
Silicone insert mold for 2.2 inch wheel. Thickness 34 mm, inner diameter 62 mm, outer diameter 92 mm. The form is twisted with 3 M3 screws, you need 2 M3 12mm and 1 M3 50mm. I used silicone with a hardness of 25 shore scale to make the…
I had a 120mm tires that i wanted to apply to stock wltoys 12428 discs, unfortunately stock discs has different diameter for the beadlock rings, this thing could help you if you want to do the same. See results here: I used tires from an…
I still haven't set-up my 3D printer so I haven't printed and tried this but I am pretty satisfied that it should work very well. I'm looking forward to setting up my printer and printing some of these so I can get my TRX-4 kit trail…
1.9" RC Wheel Beadlock with 12mm Hex 1/10 wheel for rc crawler Axle diameter : 5 mm Hexagon diameter 12.3 mm (3d print tolerance) External diameter : 52.4 mm Width : 27.8 mm Screw DIN 7380 M3*20 - 8 pcs Support : no Raft : no Check out my…
Attrezzo copiato da immagini prese online utile per tenere aderenti le due parti dei cerchi Beadlock funziona con cerchioni 1'9 e 2'2 saranno necessari oltre ad i pezzi stampati dado M5 1 pz bullone M5 70 mm minimo 1 pz rondella M5 1 pz…
Problem with original is that the hole for the hex axle is 1mm deeper than it should be, I added 1mm of material.
I had issues with the small tabs breaking off and/or not printing nice. Remixed to add a bit of support. Also found that printing these face down will leave a better mating surface between the rim and hex nut. At the expense of appearance…
beadlock 1,7 vytvořený pro možnost osadit i 1.55 gumy. šrouby M2x8-10. podpěry ano.
Print facedown on a texture plate with supports. 4 Walls, 60%+ infill for PLA. ABS or Carbon PLA recommended.
Each wheel will require 10 2x20mm screws.
These are front and rear beadlock rings for the new 5IVE-TE 3.0. They use the same length and type of screws as the originals. I would suggest printing at 100% infill in a tough filament.
Beadlock ring which can carry the 70g grams of the additional weight. Squeezes the tyre bead as much as possible and acxeptable with respect to the PLA rims. Recommendation from the original creator: To add the extra weight, I used these…
Custom beadlock-style rims designed for the MN82 RC crawler . They feature an offset similar to the stock wheels and mount directly to the hubs using your original stock axle screws. All files are pre-oriented for printing and feature…
Update 22.11.2025 i updated the file, i uploaded wrong one, opps. sorry!
Dirty Life Ring Spacer for 9302/9303/9304 - 17" - 24 bolt bead lock wheels, I printed in PETG, prusa,.stl,step,.3mf,.3dm file attached. .25" thick. I use 4 spacers per wheel with a Mickey Thompson Baja Pro XS 40X13.50-17LT C on the Dirty…
Problem with original is that the hole for the hex axle is 1mm deeper than it should be, I added 1mm of material.
RC 1:10 Scale 2.2" Truck-Style Beadlock Wheel Set This is a highly detailed, modular 1:10 scale RC wheel designed for 2.2" tires (~62 mm outer diameter). The design is inspired by real heavy-duty truck wheels, featuring interchangeable…
1.9" RC Wheel Beadlock with 12mm Hex 1/10 wheel for rc crawler Axle diameter : 5 mm Hexagon diameter 12.3 mm (3d print tolerance) External diameter : 52.4 mm Width : 27.8 mm Screw DIN 7380 M3*20 - 8 pcs Support : no Raft : no Check out my…
1.9" RC Wheel Beadlock with 12mm Hex 1/10 wheel for rc crawler Axle diameter : 5 mm Hexagon diameter 12.3 mm (3d print tolerance) External diameter : 52.4 mm Width : 27.8 mm Screw DIN912 M2*6 - 6 pcs Screw ISO7380 M3*20 - 6 pcs Support :…
Been wanting to replace the worn out wheels for my kids ride-on toys, so I designed a 3 piece Beadlock Wheel that can mount off road ATV & Go-Kart tires. Mounting rubber tires allows for better traction (no more spinning tires) and faster…
