653 modeli
A simple and quick print to replace any broken or missing clips for the affordable IKEA Schottis blinds . I needed some extras for spares and replacements so I took to may callipers and made a replacement, this has been designed to be as…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
In my caravan, a Sprite Europe, de blinds are hold by 2 little holders. Some of them were broken, therefore I copied them in Fusion 360 and printed with Prusament PETG. Sliced in PrusaSlicer 2.6.6: 0.6 nozzle, 0.15 detail, brim, organic…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A plate for weighing down Lysel slatted curtains. Measurements: 89mm x 50mm
Wydruk około 2,04 €–2,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created this model to remove the arm from a Ikea FRIDANS roller blind but the model may also be used to replace broken parts of common roller blinds. The mechanism is working quite well, if you are having issues please write a comment…
Wydruk około 5,02 €–6,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This bracket is most similar to these products (adding multiple links in case one or more go dead in the future): LEVOLOR Trim+Go 2-Piece Universal Brackets Plastic Hold Down Bracket for 2" Wood and Faux Wood Blinds Cutelec 16pcs Hold…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
This is a replacement valance clip for 2.5" blinds. I'm not sure of the brand of blinds, but if your clip looks like this one and the blinds are 2.5", it may work for you. The model prints well in draft mode (0.30mm) without any supports.…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
M50x1.5 threaded blind stuffing to close unused M50-openings. Unused PG42-openings in housings are also possible to close with this blind-stuffing set. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Highlights: An alternative for the Ikea Schottis blinds clip that some people struggle with. Can be fastened at different heights. Can remain on the blinds also when fully closed, will not fall off. Quick release to different heights,…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Using the original design (thanks to Irgendeintyp ), I turned it into a socket to repair the broken parts. In this form, the weights were reused by cutting the broken handles and trimming the edges. This saved printing time and filament…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
Originally made by Lundiplutzmus. Modificated to mount flat against the wall. Put the 2 halves together install with 1 screw against the wall. Easy to print. I'm printing all my parts in PETG (the added gcode is for PETG), but use your…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple cord pulls that were printed with PETG. These were made to replace missing cord pulls of the same shape. The center pull in the picture is an original pull made out of wood.
Wydruk około 0,46 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sometimes the sun can damage this cover, so I thought I'd print it out. Printing is very simple
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Laptop camera blinds This attachment hangs on your laptop screen and limits the viewing field of the 16:9 camera towards the 4:3 view. If you do not feel to share the 180° of your room during teem meetings. I've used it with HP, ThinkPad…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I bought these blinds very cheaply from amazon and automated them using Nema17 motors and ESPHome. Many cheap blinds come with exactly the same layout. You will need some experience with electronics to make this project work. Components…
Minimalistic Motorized Roller Blinds via esphome and homeassistant. To automate your roller blinds for: open blinds slowly and noiseless when waking up, coupled to your alarm clock close blinds on hot summer days control blinds if you are…
Blinds chain connector Print should work with 0.4 nozzle. If not, check extrusion width and decrease. Shall work with PLA but PETG recommended. ASA may be interesting alternative due to UV resistance. Print instructions Rafts: No…
I made a holder for the wooden slats on the terrace.
These pulleys are designed for chain drive roller blinds. The original pulleys supplied with the blinds often skip steps, are noisy and do not support larger and heavier blinds. Use the pulley corresponding the size and weight of the…
Dvoudílný držák pro uchycení kuličkových řetízků horizontálních žaluzií. Vhodné pro řetízky s průměrem kuliček: 3,2 mm. Rozteč středů otvorů pro upevnění krytky na okenní rám: 25 mm. Print instructions English text bellow Držáček řetízku…
Simple mount for converting an IKEA roller blind to a smart blind. BOM: 1x 608 bearing 1x 6mm, 2GT214 timing belt 1x 20 tooth 2GT 6mm pulley for stepper motor 4x 3x16mm SHCS bolts 1x Pancake Nema 17 stepper motor & driver (I used a TMC…
The original blinds cord connector does not keep tightened well because it does not provide any snap mechanism and so can easily fall apart. The model parts snap together and keep the cord well connected. Designed for cords with ball…
Dieser Blindstopfen verhindert das Eindringen von Schmutz in einen Schlauch mit Gardena-Stecksystem.
@Osfald's connector is cool but not strong enough for my use so I have connected two of them together. Let's see how long it will last :) Also because my chain balls are smaller (2.8mm), I have scale the connector down a little Printed…
The included 'gears' that came with my DIY blind motors weren't doing a great job of moving my specific blinds, so I designed this gear to suit. The blind motor kit is a Moeshouse CM-LS DIY Smart Motorized Chain Roller Blinds setup that…
A simple window blinds support. I made it a little bit bulkier for increased resistance. I also attached Fusion360 save for anyone who wants to remix it. I print them from PETG standing up with 30% infill 4 wall loops and using support…
Print from material that can withstand sun exposure. Vhodé tisknout z materialu, ktery odolava slunecnimu zareni.
08-June I had the tolerance for the curved chain guide to gear spacing too tight causing it to bind when printed on some printers. I have increased this distance by 0.5mm which has removed the binding and allows the motor to move freely.…
Roller Blinds Replacement Parts for both sides of your window blinds. These are used mostly in Australia and original blinds were purchased at Spotlight. In this Thing is both side of the holder, the mechanical switch to roll up/down…
Easy fix to get (at least part) of your rent deposit back :). I used this clip to repair a falling vertical blinds vanes. It held well without glue but if you looking for extra strength, crazy glue will work great
M20x1.5 threaded blind stuffing to close unused M20-openings. Unused PG11-openings or PG13.5-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details…
IKEA's SCHOTTIS blinds are great, because they're cheap. And since they're cheap, the clips for adjusting the length of the blinds are also cheap. That's not great. Actually, IKEA's flat clips are ingenious, since they can expand as…
Jednoduchá tlač bez podpier z odolnejších materialov PETG,ABS,ASA. Stl obsahuje pravú aj ľavú krytku.
M25x1.5 threaded blind stuffing to close unused M25-openings. Unused PG21-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details below). [1] Thread…
Small smarthome motor upgrade for roller blinds recently sold at LIDL or compatible models. Made with easy installation and small space requirements in mind, without modifying the original blinds to much. Everything done here can easily…
The original parts keep breaking… so I do replace them on demand. None of the printed parts broke yet ;)
Window roller blinds system parts.
M16x1.5 threaded blind stuffing to close unused M16-openings in housings. Unused PG9-openings or PG11-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases…
I liked both designs of this holder, yet I needed it to hold on the wall by itself, like the original non-motorized one. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 15% Filament: doesn't matter…
This is a DIY project requiring some electronics, soldering, Arduino IDE and basic knowledge uploading code to a compatible board You can follow all the relevant step by step on my blog page here:…
Two parts that commonly break on cheap roller blinds. ChainSideBracket.stl is the mounting bracket for the side with the chain pull, while idlerSideTubeInsert is the piece that slots into the idler side of the core tube of the blinds to…
I made this as our guests kept switching off the lights. This replaces the normal Fuga switches. Print the Hue Smart switch model as shown above. There is a notch for the smart switch on this part as well on the downward facing side.…
It's the part you put on the window frame and it holds the rest on the roller blinds on that window. Mine got knocked out and broken by the damn cats eating thru the plants and I tought it's a shame to throw away a perfectly good shades…
I wanted a nice way to tidy up long cords for window blinds, so I designed this simple cleat to wrap the cord around. I only like to drill holes in the wall when necessary, so I designed this to be mounted with a small Command strip.…
Parts I used to convert regular typical blinds into motorized ones using 28BYJ-48 stepper motor. The set consists of two sides - the one with a motor, and the free-rotating one. You need to mirror some of the cover parts to have the motor…
Somehow my blinds bead chaing connector broke. So I designed and printed a replacement. Designed in Fusion 360 printed withe resing on Anycubic Photon Mono.
PG21 threaded blind stuffing to close unused PG21-openings in housings. [1] Thread type: PG thread [2] Diameters for PG21 opening: a) threaded hole: 26.8mm / PG thread b) drill hole without thread: 28.3mm [3] Sealing: An optional…
Roller blinds curtain attachment for normal curtain rail, adaptor bracket for curtain rail, curtain track holder for zebra blinds, kornise stor perde takma aparati, rollo vorhangschienen adapter …easy to print and fits perfectly
Do you have ball cord driven Venetian blinds and do you want them automated? This project is direct drive approach with low cost stepper motor. Print instructions I have many windows with ISSO style venetian blinds (type with ball chain…
Flat sided - to print on its side for layering strength. The number on the bottom of the original pull tab - P15BH2 I included a 5mm thick test part so you can check the fit before final printing. I'm not sure if there are more than one…
Replacements for old Ikea roller blinds Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Prusament PETG Category: 3D Printer Parts
Old holder broke. Daighter asked to receive a remake, so I remade. TinkerCad. Prusa MK4. PETG. End of story. Explore my other Printables: https://www.printables.com/de/@Tritschi
I printed from PLA with 100% infill, 4 walls. I recommend using PETG. I also printed at an angle of 30 degrees, but you can experiment.
I wanted to control the tilt of my 2" venetian blinds through Home Assistant using ESPHome. My first setup was using a 28BYJ-48 stepper motor which worked but is was barely strong enough for the job. I had to use gear reduction to power…
I had several of these broken valance clips and these 3D printed replacements work great! I'd imagine that any filament like PLA will work just fine. Basically a copy of these.…
M32x1.5 threaded blind stuffing to close unused M32-openings. Unused PG29-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details below). [1] Thread…
PG11 threaded blind stuffing to close unused PG11-openings in housings. [1] Thread type: PG thread [2] Diameters for PG11 opening: a) threaded hole: 17.3mm / PG thread b) drill hole without thread: 18.6mm [3] Sealing: An optional…
Hidden Valance clip, for faux and real wood window blinds. Category: Household
This is a small cone for the window blinds strings. 4 of the original small cones has broke on our window blinds at home. So I designed and printed new ones. They are a little bigger and thicker then the original to give a better grip.…
This is designed to hold a 28BYJ stepper motor in place to rotate the worm gear driver found in most household blinds. There are other projects which mount a motor in a 2" track and drive the rod directly. My blinds are a 1" track and…
The bottom weight of the vertical blinds kept breaking repeatedly, and I decided to design my own version that incorporates washers/coins, allowing for easy weight adjustment. The version I created is made to accommodate the dimensions of…
Ball Chain Connector / Bead Chain Joiner / Blind Chain Connector (5mm) This durable connector is designed to securely join the ends of a 5mm diameter bead chain, commonly used in roller and vertical blinds. Ideal for repairing or…
PG9 threaded blind stuffing to close unused PG9-openings in housings. (normal usage) [Extension for PGxx to PG9 adapters] For the use with PG-adapters (PGxx to PG9) with very little space between the PG9 cable gland openings, I added a…
This is a simple cone-shaped tassel for the pull cords on blinds. My dog ate the originals. Print instructions Print Settings Printer: Anycubic i3 Mega-S Rafts: No Supports: No Resolution: 0.2
M12x1.5 threaded blind stuffing to close unused M12-openings or PG7-openings in housings. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for M12x1.5 opening: a) threaded hole: 10.5mm / M12x1.5 thread b) drill…
Window roller blinds system parts 2 See also: Window roller blinds system parts 1
*Updates 24/01/2024: i've noticed there is a little gap between the cap and the motor holder and the cover, i'll try to rething the locking system. *End of updates Since I had some 5v small motors I've tried to integrate them with my…
Window coverings that operate with continuous cord or bead chain loops are a strangulation hazard to kids. Limiting access to the cord or bead chain loop is a simple way to make these window covering safer for kids. Free-hanging loops…
PG13.5 threaded blind stuffing to close unused PG13.5-openings in housings. [1] Thread type: PG thread [2] Diameters for PG13.5 opening: a) threaded hole: 19.1mm / PG thread b) drill hole without thread: 20.4mm [3] Sealing: An optional…
Am besten mit 5 Wandlinien und 30% Füllung drucken. ABS oder PTFE sind zu empfehlen.
The cover was modelled to be identical to the original. The original covers become fragile with age and crumble. Printed in Prusament PETG, no supports, 0.15 mm layer height (to make the fillets nice), 0.4 mm nozzle. Left and right models…
Box for storing automation for opening/closing blinds. There are 2 compartments in the box: for storing Nema 17 motor for storing ESP32 + motor driver + eventually a step up/down current chip Nema 17 sample file is just a sample of nema…
Remixed to fit wider slats that are a reference width of 127mm or 5 inches.
Currently this is a WIP, so it will be updated from time to time… Be sure to flash the Wemos before connecting the stepper motor or you run the risk of overheating it, the firmware turns of the power to the stepper motor when not in use,…
slouží ke spojení přestřiženého provázku
First try on making a replacement bracket for the old style of mounting bracket for pleated blinds from Jysk. Printed with PLA and it has been working fine for a few weeks now.
The original one was to small to fit the connection piece of the roller blind chain. Made one by myself, just a little bit taller - simple and easy. PS: It was my first model, made with tinkerCAD. No bevels or rounded edges - just the…
A small, easy-to-print model designed to replace the connector piece that links the beaded chains of Heytens roller blinds. Whether the original clip breaks or the chain itself snaps, this connector allows you to quickly reattach the…
PG7 threaded blind stuffing to close unused PG7-openings in housings. [1] Thread type: PG thread [2] Diameters for PG7 opening: a) threaded hole: 11.3mm / PG thread b) drill hole without thread: 12.5mm [3] Sealing: An optional TPU-sealing…
Replacement valance clip for blinds. Mine are "A Better Blind" brand with a 3" tall valance and 2" slats. The long dimension is ~1-7/8"(~46mm) and the clips are ~0.5" (~12.6mm) tip-to-tip. I initially printed with PETG, but PLA gives it a…
A short blinds rod with round connector for venetian blinds. Designed to print flat with no supports.
A simple replacement for the self-gluing installation helper. My approach works without drilling opr gluing. It might be required to adjust the size for your needs (Step/3MF/STL files are included)
This is a remix of Window Blinds String Winder Nob by Snille . English In the original "Window Blinds String Winder Nob by Snille" the hole has a diameter of 32 mm. A little too small for my screws, so here the remix where the hole has a…
Covers for the ugly holes left by unused 5mm shelf support pins. Print without infill.
PG16 threaded blind stuffing to close unused PG16-openings in housings. [1] Thread type: PG thread [2] Diameters for PG16 opening: a) threaded hole: 21.2mm / PG thread b) drill hole without thread: 22.5mm [3] Sealing: An optional…
A great low-cost DIY vertical blind system everybody can print and make. I used tracing paper as main material for the blinds as it is 15 times cheaper than the dedicated fabric. (still holds up after 4 years) (standard 33cm rol cut in…
Old school “box” style mounting brackets for window blinds. Can be used to replace existing or used to replace the mounting brackets that “click” in. Will fit blinds with a mounting bar dimensions no larger than 28mm tall and 33mm deep.
PG29 threaded blind stuffing to close unused PG29-openings in housings. [1] Thread type: PG thread [2] Diameters for PG29 opening: a) threaded hole: 35.5mm / PG thread b) drill hole without thread: 37.0mm [3] Sealing: An optional…
идеально подходит
In my house some of these were broken, so had to design and print a couple as I was not able to find them online... Printed in PETG at 1.12, but PLA should work as well.
ball diameter up to 5mm/do průměru kuličky 5mm
Nothing much to introduce. I managed to loose my tokens at my last poker night, so decide to print up some more (I love 3D printing :D)
This is my replacement printed cover pieces for hiding the machanism of classical window blinds Download -> Share -> Print -> Rate -> Donate -> Enjoy -> Thank you Created for printing without supports Print instructions Model is created…
This is a ball chain connector designed for chains with balls approximately 4.3 mm in diameter. I couldn’t find a model that matched my chain, so I made one myself based on the original part. Material recomendations: Something…
Don't know what else to say here… Mine broke so I designed a new one. Works like a charm. Hope it helps you, too.
M40x1.5 threaded blind stuffing to close unused M40-openings. Unused PG36-openings in housings are also possible to close with this blind-stuffing set. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for…
A replacement carrier/slider for velux manual blinds. NOTE! Lubricate the strings of the blinds by, for example, running them across a candle, otherwise the part WILL melt and jam up from the friction. Mirror the part in your slicer if…
I love double layered roller blinds but I hate that ding noise they make when you open the door / window and the lower bar moves away and bangs on the frame. So I designed this little clip that makes the blind adhere to the frame when…
We replaced our bedroom blinds with Home Depot's Home Decorations Cordless Blinds. Our previous blinds had pull handles that kept dirt and oil from our hands off the blinds. The new blinds did not come with pull handles. This simple…
Simple motorized blind, gearless, for those of us who don't have a perfectly calibrated printer. It's an addition to @Lush_727880's model, where the mounting method has been changed, eliminating the need for screws and attaching the…
