6879 modeli
Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no Brim: recommended Assembly: Add some corc, rubber or foam at the bottom of the block. When you clamp in sand paper, the blocks will be fixed. Review: Related…
Wydruk około 5,82 €–7,11 € nettoWstępna wycena jednego wariantu
Blocky Benchy is a fun and unique twist on the popular Benchy model! With its blocky, pixelated design, this model is perfect for those who love a retro aesthetic. It's also a great way to test your printer's accuracy and performance in a…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
This is a model of the engine block made for the Original Prusa XL Five-Head.
Wydruk około 11,03 €–13,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed (Print the pipe upside down) Scale it as you like :)
Wydruk około 7,83 €–9,56 € nettoWstępna wycena jednego wariantu
A V8 engine block with a top part suitable for holding your business/name card. Test prints were made on a Prusa i3 MK3S and an Anycubic Kobra 2 from PLA with 0.2 mm layer height, 5 % infill density, 190 °C nozzle temperature and 65 °C…
Wydruk około 22,85 €–27,93 € nettoWstępna wycena jednego wariantu
Sanding block with simple construction. Made to work with a 38mm x 230mm - 240mm sandpaper stripe. After trying out a few sanding blocks, not finding anything fitting my needs. Either they were over-complicated, screws were fiddly, the…
Wydruk około 3,58 €–4,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Other parts: M3x20 bolt (2x) or you can change parameters M3n nut (4x) or you can change parameters Parameters: width lengthUp lengthDown height boltD boltHead boltHeadD nutHeight nutWidth
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
These blocks have been designed to be used with the Ender 3 V3 SE and KE models only. Another user has verified that it will work with the KE model. The right and left side are slightly different heights as the plastic molding thickness…
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
The Sock Blocker V2 has a replaceable tip for adjusting the size. It is an improved version of my original Sock Blocker with better guiding rails and a tighter fit. The two versions are NOT compatible. The tip is attached by a snapping…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena jednego wariantu
A puzzle box in the shape of a brick block. Printing All parts can be printed without supports, however Level 4 includes some long bridging that must not droop for good functionality. This project includes a version of this object with…
Wydruk około 5,03 €–6,14 € nettoWstępna wycena jednego wariantu
Multi-Material Test Block I created this small test block (50mm x 10mm x 6mm) to debug my Prusa MK3S MMU2 setup. In addition this test block allows me to evaluate the color bleed of the filaments. You will see in this print that the red…
Wydruk około 2,55 €–3,12 € nettoWstępna wycena jednego wariantu
Adjustable ruler positioning block. Highlights: Fits rulers of different sizes. Fully 3D printed, no hardware required. Just add ruler. 90° and 45° angles. Use as depth gauge, tightening nut secures measurement. Printing Tips: Model is…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
A remix of Bench Block by entomophile . It's basically identical. I reverse engineered his .STEP file as a new Fusion 360 model, just to fix some minor geometry errors that were giving me print problems. Fixing these errors allowed me to…
Wydruk około 8,13 €–9,94 € nettoWstępna wycena jednego wariantu
General information This is my slightly modified version of this model on a different platform. Initial credit therefore goes to the original creator. I made the SD card slots tighter and removed one to make room for more Switch…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
**************** If you download 💾 or collect 🗄 please hit the LIKE 👍 button. 😀 If you print 🖨 it post a picture 📷 / MAKE ! 😄 Let me know how it works for you.❔ 🙂 Don't forget you earn Prusameters🧵 when you post a MAKE ! ****************…
Wydruk około 2,08 €–2,54 € nettoWstępna wycena jednego wariantu
Check out my Amazon Page to see what kind of gear I use to make these models! This was designed to be used as a classroom exercise to teach students about 3D printing, math, and design all at once. Print out these blocks and assemble them…
Wydruk około 0,71 €–0,86 € nettoWstępna wycena jednego wariantu
Small scribing block with most common heights for woodworking. 9 - 12 - 15 - 18 - 19 - 22 mm Three models: 7,5 with “springs” inside for better hold pencil 7,5 - 9,5 simple straight holes STEP file included, to make you own custom block.…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
Combined stackable beer crate for AA, AAA, 9V Block, CR2032 and a empty crate for batterys. The crate needs a support geometry at the bottom.
Wydruk około 1,71 €–2,10 € nettoWstępna wycena jednego wariantu
You need 2x M8-35mm Screws 2x M8 nut Hot glue (Optional) General Information I printed the parts in PLA, the base should be printed in PETG/ABS because it can endure more heat. The 3d Model was drawn in FreeCAD and I used the PrusaSlicer…
Wydruk około 8,22 €–10,04 € nettoWstępna wycena jednego wariantu
Since was almost impossible to find a bleed block for my Shimano brakes I've checked the measurements of the original one and printed it. Works great! Print and check thickness should be between 10 and 10.2mm to get regular bleeding of…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is ECI mag block for a Ruger 10/22. Keeps the bolt from closing.
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Now supports Mosaic Canvas!!! During MultiColor 3D printing the default way of purging the old color during transition between colors is to use a purge block or wipe tower. The main problems with purge blocks are that they must be printed…
Wydruk około 2,33 €–2,85 € nettoWstępna wycena jednego wariantu
Made for 75mm wide sandpaper. Print instructions 3-4 perimeters 15% infill
Wydruk około 11,40 €–13,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of Micke's Simple Sanding Block with Brainanator's cornering remix, plus my own remix of curved end. This will allow this sanding block to be useful for flat surfaces, inner corners and contours. I also shrink the model so…
A calibration block for 3D printers. This has gaps from 0.05 up to 0.5mm with labels on each one. Test it with whatever your preferred print settings are.
Wydruk około 2,50 €–3,05 € nettoWstępna wycena jednego wariantu
Original model can be found here . Montessori block and barrels is a simple model to help kids learn sizes and shapes. Each of the three block present a different challenge type. Recommended to print them in different colour, and also…
Wydruk około 5,65 €–6,91 € nettoWstępna wycena jednego wariantu
Very practical sandpaper holder. If the sandpaper is used up, the sanding belt can simply be moved a few centimeters. The sandpaper belt holder consists of 3 printed components: Block Tensioner Eccentric Other accessories: Cylindrical pin…
Wydruk około 4,32 €–5,28 € nettoWstępna wycena jednego wariantu
Festool Upcycling hand sanding block – Give your sanding pad a second life! What are you currently doing with old sanding pads? Turn them into something unique – print your own Festool hand sanding block and give them a second life. Don't…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
At home, we're making our own tablets for toilet cleaning (environmentally friendly and cheaper). So I designed and 3D printed a basket to put it inside the toilet bowl. Design inspired by another model available here →…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small sanding blocks good for post printing wet sanding. We like to use and created them to wet-sand earrings. Round one has 10mm radius. Flat one is 10mm wide with 5 degrees negative sidewalls for easier sanding in the corners. Effective…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This was my first ever designed object using Fusion 360 and has been really popular over at that other "things you can print" site. At the time, we didn't have a lot of space and the printer lived in the bedroom. I was astonished that my…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Updated the Screw in V2 a bit to be way stronger and not break as easily.
Wydruk około 4,14 €–5,06 € nettoWstępna wycena jednego wariantu
Everyone sooner or later needs to sand their models. This is my version of a handy little sanding block. You can specify the used hardware. My defaults assume a standard M8 bolt and nut. But you can specify the values for M6, or whatever…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
There are some great soil blocker designs out there, but I had a need to fill a bunch of 1020 trays and I knew I could fit the footprint on the Prusa Mk3. The blocks are approximately 38mm square and fill the tray in a 6 by 12 pattern.…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Oldschool minecraft ore block. Can be printed in one go with a multicolor printer. Fits nicely with an grass block . Made in onshape It has a 16x16 grid where you can select pixels, if you want to make a custom block. The design is fully…
Wydruk około 0,78 €–0,96 € nettoWstępna wycena jednego wariantu
I first learned about the power of the Snatch Block from Destin's SmarterEveryDay video - and I've been curious about putting together a printable design for one ever since - so this challenge was a perfect excuse. These are meant to be…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
This is ECI mag block for a Ruger 10/22 or Ruger Precision Rifle. Keeps the bolt from closing.
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this model from scratch for my father-in-law, who broke his blocks and needed replacements. I've tried to track dimensions as best as it is possible. I'm not using the print, but my father-in-law was very happy with the results and…
Wydruk około 2,60 €–3,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
E3D socks will fit the mini and worked well for me, but there is some noise in the community about how stable they are. I wanted my own. If you're based in the UK and would like one of my prototype moulds or socks, private message me.…
Wydruk około 2,02 €–2,47 € nettoWstępna wycena jednego wariantu
Store up to 6 pairs of scissors with this knife-block inspired organizer. The channels measure 15.8mm x 22.8mm, make sure your scissors will fit before printing! I recommend adjusting the infill and set to your desired weight. The block…
Wydruk około 17,21 €–21,03 € nettoWstępna wycena jednego wariantu
A token to block a board space when a player uses the "The Voice" card in the board game Dune: Imperium. Could be need of 2 tokens at a time. Category: Games
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
Now you can print the block and valve covers in different colors of the 3DLabPrint Piper J-3 Cub for a more detailed look.
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
hi zusammen :), ich habe einen Adapter/Aufnahme für einen wie ich finde sehr coolen vorhanden Federkamm entwickelt um diesen unverändert an dem Parallelanschlag (horizontale Anwendung) der GTS 10 XC verwenden zu können. Anwendungsidee:…
Dual color version of Minecraft grass block. Fits nicely with ore blocks . I know the one green pixel in the left corner is missing, but otherwise it would not work. Made in onshape .
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Down Town block buildings. Downscaled from N scale. Prints easily with the supplied g-code files.
Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu
Letter blocks - Play & Learn. Písmenková stavebnice, hračka i učební pomůcka. Print instructions English text bellow ... PrusaSnake - Letters Kit (písmenková stavebnice) Je hračkou, učební i protistresovou pomůckou ve formě skládání…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
The Noble NB4/NB4+ remote is really great, and the movable steering wheel ‘arm’ is nice to allow left and righ-handed driving, as well as going ‘flat’ for easier transport. The only negative I've found is that the wheel arm tends to move…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I subtracted the chamfer of Mike Ant's module from FluffyBunny's model. Now it works for an extruder with a sock and nests neatly inside IBNobody's MK4 Nextruder Nozzle Change Heater Block Clamp. I'm sorry it looks that way.
Wydruk około 0,50 €–0,62 € nettoWstępna wycena jednego wariantu
My first design. It's a simple stand for an acrylic photo frame that can be bought on aliexpress. It is designed for the 254x203mm that is 19.4mm thick. It's best printed on its side. Link to product.…
Wydruk około 2,15 €–2,62 € nettoWstępna wycena jednego wariantu
Goal is to get the pin in and out of the block without breaking the block. Printing (in PLA! ): Block: Layer 0.2 / Nozzle 0.4 / Perimeters:8 / Infill 100% / no support or brim / Print flat as positioned in the STL Pin: Layer 0.2 / Nozzle…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Simple drill block for most common drill sizes, 3mm to 10mm. Should help with guiding the drill to be under 90° into the material.
Wydruk około 2,02 €–2,46 € nettoWstępna wycena jednego wariantu
You can use the height gauge to measure and keep track of your settings on any piece of equipment in your shop. Use the ruler in the center of the gauge to lock in a measurement and then setup all your equipment to match the height or…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
I recently made some mounts for suet balls to avoid using the still often sold suetballs with a net around them. Those nets are really dangerous for small birds (risk of entangling) and produce even more plastic waste. Our birds need…
This model represents a generic industrial interlocking concrete block system , inspired by real-world construction and infrastructure elements, commonly used for retaining walls, temporary structures, ballast containment, and industrial…
Hello, Welcome to my profile, full of models and miniatures :-) I have Block, Brick, LEGO Flowerpot, Vase for you. It prints really well. You need to use supports! If you are interested in my work, the links are here:…
Wydruk około 7,30 €–8,92 € nettoWstępna wycena jednego wariantu
A knurled, screwable Stackbox for a Blockmit style seed phrase backup for M8 stainless steel washers with 24 mm outer diameter). The box can hold up to 25 washers. Print with 0.15 mm layer height or lower, and at least 4 perimeters for a…
Wydruk około 5,43 €–6,63 € nettoWstępna wycena jednego wariantu
This calibration cube is also an educational toy for kids. It works as an interlock construction block, and also as an aid to learn math . The cube is designed specifically to stress: Measure accuracy Bridging Stringing Overhangs (in the…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
A very very simple remix of a model that's already itself a remix. Print as oriented with your chosen infill; 100% infill makes for very strong pegs. You'll have to print the original model in order to make use of this model.
An educational toy for children that helps them visualize simple additions. It has 10 different blocks from 1 to 10, each one with its number on it and a matching height in centimeters. The blocks are 4cm wide and 3cm deep. They stack…
Wydruk około 12,61 €–15,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This desiccant block fits the rubbermaid 21 cup containers. It has strong walls so it can support 1 Kg spools easily. Print Instructions: YOU MUST FOLLOW THE PRINT INSTRUCTIONS!!! Print using ZERO top and bottom layers (REQUIRED.) Use 45…
Noticed when using a trigger lock that it was loose and was still able to manipulate the trigger. For added safety and keep the lock from 'rattling' came up with a simple block that protects the trigger.
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
The Acerbis Chain Guide Block 2.0 easily replaces the entire OEM unit and ensures durablity and high resistance to shock and wear from the chain. Why pay top dollar when you can make it yourself =) ---- Reservdel Kedjestyrare Acerbis…
Wydruk około 3,12 €–3,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A basic case for Arduino Mega + BTE16-06 screw terminal blocks.
Wydruk około 3,37 €–4,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was able to find block off plates for the exhaust ports and water pump ports, but not the intakes so I designed one!
I needed cheap, low-working-load sheave blocks for theatrical rigging to fit 3-4mm VB (Venetian blind) polyester cord, so I decided to design some that use ubiquitous & cheap 608/608ZZ bearings for smooth running. I had a bunch already…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Basic baby blocks that include all 26 uppercase letters of the alphabet and numbers 0-9. 6 blocks for all 26 letters and 10 numbers Block A - A,G,M,S,Y,5 Block B - B,H,N,T,Z,6 Block C - C,I,O,U,1,7 Block D - D,J,P,V,2,8 Block E -…
Wydruk około 2,11 €–2,57 € nettoWstępna wycena jednego wariantu
I created this quickly to help sand those difficult areas and acute angles of models i was making 2x M3 bolts 2x M3 nuts Assembly Steps Use images for reference Cut a strip of sand paper 10mm wide Fold around sanding block Insert screws…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
· Name : Chess Board with Interlocking Blocks · Description : This chess board consists of 64 separate blocks which are interlocking with each other, designed for easy and faster printing. Each block represents a square on the chess…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
Needed a way to store a extra parts Lego Kit. A place for parts and the manuals. Also it makes for a nick way to display the models put together. printed at 0.2 layer height using Silk PLA on a Prusa MK4s with MMU3
Wydruk około 4,99 €–6,10 € nettoWstępna wycena jednego wariantu
This model was created from a single photo taken of the Block Island ferry this summer, using Rodin ( https://hyperhuman.deemos.com/rodin). The ferry runs from the fishing village of Galilee in Narragansett, Rhode Island to Block Island.
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
use for user testing angle
Wydruk około 4,80 €–5,86 € nettoWstępna wycena jednego wariantu
Stargate Rings Puzzle - Blocked! I designed a Stargate Ring Platform for use in a game I am working on. After scaling the platform up, I realized this would make an interesting puzzle. This is the result of that effort. Puzzle concists of…
Wydruk około 5,56 €–6,79 € nettoWstępna wycena jednego wariantu
I needed an adjustable bearing block so i modified JoesTinman's design. This design is compatible with SC8UU bearing blocks. Printing: Print with 3 Perimeters & solid infill threshold: 15mm^2 There are two versions of this design, sc8uu…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of simple hole cover that should be compatible with any AeroGarden product. Additional layers on the top of the cover (base of the print) completely block out the light, reducing the possibility of algae growth in the water…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
This model represents a typical modern railway fence and is designed as a single solid piece , avoiding complex assembly. The comb-style structure ensures strength, precise alignment and easy printing , even on small FDM printers like the…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
Replacement for this rod you need to lock the Hamax Caress (and possibly other stuff?) to your bike. I lost mine for some reason, so remodeleted the original one from our other bike in SolveSpace. It prints rather terribly due to the…
Helps push bits of stuck paper through a shredder - scale it to fit your shredder!
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
I used: Infill 15% Borders (for stability, but I'm just anxious, I need them for my mental health) Standart 0.2mm layer with 0.4 nozzle Fast print - one takes around 8 minutes
Wydruk około 0,15 €–0,19 € nettoWstępna wycena jednego wariantu
Whenever I was riding on the zero motorcycle and there was mud on the road, I would find myself having to clean the rear braking light constantly. When you have the brake light covered in mud, it is really dangerous as other drivers wont…
Wydruk około 1,22 €–1,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Black & Decker Workmate WM550 Type 9 4 Loch Halter für Spannbacken. Wird gesteckt, verschrauben nicht nötig. Der Halter sollte sich stramm aufstecken lassen und dann einrasten. Filament PETG Flashforce PETG Black
Wydruk około 9,17 €–11,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To prevent forgetting the clamp on the heating block, I added an extension to the side of the clamp. Now the print fan door can't close. Damit die Klammer nicht mehr so leicht am Heizblock vergessen werden kann, hat dieser Remix eine…
When you need more than the seat post adjustment can provide, adding blocks attached to the pedals to bridge the gap. Don't pedal on your tiptoes, print some pedal blocks that snap onto your existing Assault Fitnesss Airbike pedals.…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
CockBlock modeled after a plushie I saw on the internet. Show your friends when you need to. Can be printed in the current position, supports are recommended, very easy to print. Added the gcode for FDM just in case
Wydruk około 2,04 €–2,49 € nettoWstępna wycena jednego wariantu
Knobelspiel Block puzzle: Bringt alle Blöcke in der Box unter, aber natürlich nur durch die Deckelöffnung. Der Druck ist einfach, ich habe PETG verwendet, aber PLA ist mindestens ebenso geeignet Block puzzle cover.3mf: Deckel Block puzzle…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Same as my previous model (https://www.printables.com/model/66378-blocky-heart), but I added a new variable, half , to the OpenSCAD code. Setting this variable to true only renders half the model, allowing you to easily print the model in…
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
Black&Decker Workmate WM825 - Stanley Deluxe 4 Loch Halter für Spannbacken. Wird gesteckt, verschrauben nicht nötig. Der Halter sollte sich stramm aufstecken lassen und dann einrasten. Filament PETG Flashforce PETG Black
Wydruk około 8,46 €–10,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Quick Wire / cable Connector Terminal Block Spring Connector wire holder (Multiple types) with space for small labels. I needed a holder to hold multiple types of these different type of wire connectors. The fit is tight because I don't…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Function The Blocks have a special pattern of tiny octagons on each side, allowing a connection between to cubes in any of the 4 usual orientations. The patters is also repeated 4 times per side to allow connecting the blocks in a shifted…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Use M3 screws (≤ 9mm) and washers to fixate the two parts.
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
Helo, when you buy your knives set you are limited to 5 pieces. Like in my case i bought more knives separately, but had no place to put them. Block is printed 0,15mm in Antracite PLA from Fiberology, I am begginer so did not wanted to…
Wydruk około 25,40 €–31,05 € nettoWstępna wycena jednego wariantu
The 1x1x1 building block is a 3 inch by 3 inch by 3 inch (76mm by 76mm by 76mm) cube intended to be used as a fill in size for commonly found cardboard building blocks. This is meant to be a child's toy to help further bolster creative…
Wydruk około 3,75 €–4,58 € nettoWstępna wycena jednego wariantu
Replacement part for food dispenser HoneyGuaridan A28 (Code model: HG-A28D), Print only in PET/PETG for flexibility.
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I really liked this model and there was a suggestion to create a 45 version of it so I made this. Print with the 45 degree side down. It requires no supports. Happy Printing! Edit 10.6.24: Added an M5 nut for the back of the Dock plate…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
I recently found this instructable for building a sanding block that can be used with a belt from a belt sander. One part (the lever) looked a bit difficult to manufacture from wood, so I made a model and printed it out. Works perfectly.
Wydruk około 1,03 €–1,25 € nettoWstępna wycena jednego wariantu
As you can probably garner by the name, this is a very inspired MagSafe charging cube. But I'm cheap and wanted a bit of a reason to learn proper modeling techniques. It is split into 3 printed parts for both ease of replacing something…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this to block the white led that indicates sleep on the Koorui Monitors. I find this uncomftorble to sleep. These just slot over the existing light. Print in very fine resolution (0,1). The model is very fast, so you are done…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Beschreibung: Dieser Einflugblock wurde speziell entwickelt, um Honigbienenvölker vor Angriffen der Asiatischen Hornisse ( Vespa velutina ) zu schützen. Diese invasive Art breitet sich seit Jahren in Europa aus und übt durch ihr…
Wydruk około 2,85 €–3,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holds flyscreens in place within window frame
Wydruk około 0,71 €–0,86 € nettoWstępna wycena jednego wariantu
Black & Decker Workmate WM550 Type 9 1 Loch Halter für Spannbacken. Wird gesteckt, verschrauben nicht nötig. Der Halter sollte sich stramm aufstecken lassen und dann einrasten. Filament PETG Flashforce PETG Black
Wydruk około 2,21 €–2,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi, We have a an Alligator Slicer to slice our vegetables, however after long term use the clips holding the blade block in place have broken off. So there clips are a replacement for the orignal clips.
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
