Liczymy pasujące modele…
NEW 3 face corner bracket: https://www.printables.com/model/1390968-strong-corner-bracket Simple 55 × 55 × 15 mm corner bracket designed for M3 screws. Easily scalable for larger applications. Features: Pre-sized for M3 screws Compact and…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena jednego wariantu
3D printable Filament Shelf Brackets make storing your filament a breeze! No supports needed. I recommend mounting a bracket to each wall stud. ¾" ID PVC Pipe (1" OD) will snap into place between brackets for easy assembly. EDIT 5/6/24:…
Wydruk około 10,40 €–12,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…
Wydruk około 7,17 €–8,76 € nettoWstępna wycena jednego wariantu
The Strong Corner Bracket is designed for reinforcing corners where three panels meet at 90°. With dimensions of 50 x 50 x 50 mm , it includes screw holes suitable for screws with a diameter of 3–4 mm . To reduce material usage without…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
GOAL : Mount a display (phone in this case) below the monitor in my home office. This display shows my agenda, provides controls for lights, AC and shows temperature/time. In the (near) future it will provide more controls and info.…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
I wanted a stronger lack bracket. Print instructions 40-50% infill 3 Walls I use PETG, and 0.3mm layer height. 4 x 25mm screws works fine.
Wydruk około 7,79 €–9,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Used to detach the filament sensor from the original spool holder. You might want to do this when building a custom enclosure for your printer or when using a different spool holder. Features: Easy print without support structures Firm…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Wall mountable xbox controller and headset stand, xbox logo on top part. Category: Video Games
Wydruk około 6,09 €–7,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a print of a bracket for mounting Philips Hue Bridge to a wall. Features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…
Wydruk około 2,42 €–2,96 € nettoWstępna wycena jednego wariantu
I have change a few details from Sean&Lucia model. All the fillet are now chamfers Added chamfer in the bottom corners to add strenght Added chamfer were the Packout sits for a better stability of the case in the bracket The top surface…
Wydruk około 9,57 €–11,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you find this file valuable a $1 Venmo donation would be awesome! Thank you! Designed to work with two 1.5-inch drywall or wood screws. Run the screws in and out of the clips a few times to reduce friction. Don't overtighten or use a…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Reinforcement - stiffening for IKEA LACK table. Stiffens the table and reduces vibrations . No supports needed. PET-G recommended. For one table you need 4 pieces . Material Recommendation: PET-G. Installation Requirements: 32 screws…
Wydruk około 1,92 €–2,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mounting bracket. Recommended to print with a 0.4 nozzle with a layer height of 0.2 or less! For material, something that's more resistant to heat than PLA is advised. Commenter @jornthree_2921709 recommends PETG or ASA. I've used a PLA…
Wydruk około 0,81 €–1,00 € nettoWstępna wycena jednego wariantu
I designed this for my EGO 615. It uses very little plastic but is still very strong. I only print it with PLA and only 20% infill. The nice perk is that it has an angled design to help with self-aligning, so you don't have to be precise…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
Need to mount your shiny TS4 under your desk or monitor stand? This print will do the trick. Once the bracket is mounted, the TS4 can be easily slipped in and out via the integrated retention clips. Simply attach the cables to the back…
Wydruk około 3,40 €–4,16 € nettoWstępna wycena jednego wariantu
Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE: The "remix_drip_bracket_7.2" version (shown in blue) fits better and centers the build plate over the resin vat better. I will remove the earlier version to prevent any issue of downloading the wrong file (earlier version shown in…
Wydruk około 4,84 €–5,91 € nettoWstępna wycena jednego wariantu
Shelf bracket for M6 screws 150 x 150 x 50 mm 10 mm wall thickness 100 mm screw distance
Wydruk około 6,31 €–7,71 € nettoWstępna wycena jednego wariantu
What is it? Printed part to connect the particleboard floor of a drawer to its chipboard backpanel. Tested with a repair and enhancement on my 2012 IKEA MALM chest's drawers. Might work for others with the same design too. Why use it?…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Dyson vacuum cleaner toy is a great thing to keep your child busy while using the big vacuum yourself. But most of the time this thing just keeps lying (and flying) around in our closet which is quite annoying. So I made a wall…
Wydruk około 2,60 €–3,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printet on prusamini with low detail and 15% infill
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
Case & Brackets (2020 Extrusion) for 16x2 1602 LCD Display Screen Blue + IIC I2C Module https://amzn.to/3LPVWNE
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Despite a very expensive cleaner, the Dyson company doesn't supply another bracket for the multiple attachments. I just had to design my own. These are two wall brackets for the Dyson v11 One for holding two attachments. One for holding…
Wydruk około 6,66 €–8,13 € nettoWstępna wycena jednego wariantu
Recently I have started to enjoy plaing games on my PS2 again, if it just weren't for this noisy fan! You can hear it several meters and it annoys me. Looking for a fix I stumbled across kaputniks design on thingiverse. It lacked some…
Wydruk około 3,42 €–4,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've been working on utilizing Pico remotes to control Zigbee lights through Home Assistant , and I wanted some additional wall mounts for the extra Pico remotes that I wanted to install, so I remixed joshcarter's original wall bracket to…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Note: This design is not mine. The original creator of these parts is pekcitron . The parts were reworked by jltx and uploaded here . Many of you will never find / have found these parts on Thingiverse, but since I think this upgrade…
Wydruk około 5,36 €–6,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple cover for behind the lcd screen.
Wydruk około 0,53 €–0,64 € nettoWstępna wycena jednego wariantu
Hyte Y60 Fan Bracket (3x120), I made the second version of the https://makerworld.com/en/models/138628#profileId-151004
Wydruk około 1,55 €–1,90 € nettoWstępna wycena jednego wariantu
While you are staying safe at home, you might have something break that you'd typically go buy a replacement or perhaps a repair bracket for. (For example, the snack drawer's increased contents and enthusiastic children might result in…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Shelf bracket for M6 screws 150 x 150 x 50 mm 10 mm wall thickness 100 mm screw distance
Wydruk około 9,43 €–11,52 € nettoWstępna wycena jednego wariantu
Never let your shelves sag again with these strong and stylish furniture shelf brackets. Optimized for the Prusa Mini, these brackets are easy to print and will provide sturdy support for your shelves. Features: Strong and durable design…
Wydruk około 5,02 €–6,13 € nettoWstępna wycena jednego wariantu
Like this mount? Check out our brackets too! https://www.printables.com/model/1083606-govee-compatible-bracket-for-permanent-outdoor-lig Brackets to mount the power brick and switch brick for Govee Outdoor Pro lights. Suggest printing…
Wydruk około 5,69 €–6,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are some bracket designs for holding a Master Cooler QUBE 500 PC case to the underside of a desk. This is ideal for people like me, who have an already cluttered standing desk and don't like cables reaching to the floor. There are…
Wydruk około 9,15 €–11,18 € nettoWstępna wycena jednego wariantu
Plate mounting bracket for 7" Touchscreen case for Raspberry Pi 5 + slim version , 7" Touchscreen case for Raspberry Pi 4 + internal fan or 7" Touchscreen case for Raspberry Pi 3 (B/B+) + internal fan . Features Thread inserts Display…
Wydruk około 3,61 €–4,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of the Hazard Triangle Holder for BMW I3 Trunk. https://www.thingiverse.com/thing:4671592 Things Changed: Optimized Screw Holes for longer Threads to fasten it Added a Hinge and a flap to secure the Hazard Triangle in the Holder…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Set of designs to make a ‘table top’ or connector for on top of a DeWalt Tstak toolbox. I used one to create a connector to hold my Ryobi Vacuum on top using https://www.printables.com/model/1044158-ryobi-link-wall-mount-single-cleat as…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
Strong and easy to print corner brackets. Printing tips Use stronger materials such as ASA 275, PETG or Modified PLA (e.g. Strongman) Set infill to 20% Print without supports Suggested resolution is 0.2mm Variants Small - 25mm Three…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
This little bracket makes it easier to construct an ultra-light directional radio antenna using aluminum arrow shafts. The bracket slips onto an arrow shaft which acts as the antenna boom and allows simple attachment of arrow shafts to…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Compact build plate mount for your Saturn S to let excess resin drip off on an angle into your vat. Changed the original design to fit a Saturn S. Original design is too big and it doesnt fit onto the arm. Bracket now fits snuggly to the…
Wydruk około 3,14 €–3,84 € nettoWstępna wycena jednego wariantu
Bracket for mounting a Starlink Gen 3 router
Wydruk około 3,32 €–4,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a wall shelf and decided to use two of the BESTÅ Shelf, white, 22x6 1/4" from Ikea. I designed this wall bracket to hold two shelves and add a little flare to my wall. I decided to make it hang with cleats, so that it would be…
Wydruk około 8,32 €–10,17 € nettoWstępna wycena jednego wariantu
Bracket to adapt the Sunshine PIP dial indicator to the Ender 3 Neo V2 and alike head style.
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
You can download with or without the inscription.
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Flipable. Cases friction fit and can face either direction. Print instructions prints in ABS, .2mm layers no supports
Wydruk około 1,37 €–1,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Background I have a small form factor (SFF) PC tower that I needed to put a WiFi card into. I somehow lost the one that came with the TP-Link Archer T4E WiFi card, so I made this to fit in the case :) Model description This PCI Low…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
The bracket in SLA file has some arbitrary dimensions I have used for one of the power bricks I wanted to mount from the bottom of my desk. Mounting is done using self-tapping screw. Adjust dimensions according to the size of your own in…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
See photo for placement on prusa mini and you can print directly without any support. Printet as speed print and 15% infill
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
Bracket for mounting a 2.5" SSD or HDD in place of a PCI Express expansion card
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
This bracket holds two 120mm fans for the front of the case, it's about 10mm thick to avoid turbulence It pretty much maxes out the width of my mk3 printer and I also designed it to not require supports I added some slots for some magnets…
Wydruk około 6,49 €–7,93 € nettoWstępna wycena jednego wariantu
I recently added a heat pump to our pool, so I had to redo some of the piping and needed some brackets to hold them in place. Off the shelf brackets didn't work so I made my own ones and thought I'd share them, in case someone has the…
Wydruk około 2,27 €–2,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed on 15% infill, 0.2 mm layer heights on an Ender 3 V2 and works great. Be careful when screwing in because in the past I've had issues with models splitting in 2. I designed this 90 degree corner bracket holder with slots for…
Wydruk około 3,19 €–3,90 € nettoWstępna wycena jednego wariantu
Installs into the secondary display port, just above the built-in network and USB ports. Requires: 4x M3x4x5 heat-set inserts 2x M3x8mm countersunk screws Also uses 2 screws removed from the original metal bracket Potentially worth…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick. Printing Print with screw holes for PCB flat on the build plate. Material: PLA or PETG Print Settings (PrusaSlicer): 0.20mm…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
PCIe Mining Bracket Is your mining rig keeping you up at night, dreading that those unsupported PCIe adapters are going to wriggle lose destroying your rig and precious hopes and dreams? Rest easy with the PCIe Mining Bracket. This puppy…
Wydruk około 0,96 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made these brackets for the xtrons PX7439BL radio because the supplied radio brackets did not fit very well. Printed from ASA for heat resistance and strength. No need to buy additional screws or nuts, just the original BMW radio screws…
Wydruk około 1,74 €–2,13 € nettoWstępna wycena jednego wariantu
This was designed in tinker cad and is being used to hold signs ontop of multiple mailboxes. It was printed in PETG for outdoor durability. It has a support built into it for stability.
Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of Ikea Lack enclosure reinforcing bracket that I recreated from scratch in FreeCAD to be parametric with countersinks for Grip Rite exterior screws. Screw part number: PTN114S1 https://grip-rite.com/product/grip…
Wydruk około 21,66 €–26,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Features Combines the Adjustable Thermometer Bracket and the Filament Guide Enables to use a second spool holder on the left side Uses the same hardware as for the filament guide What you need Printed parts thermometer_bracket_A (1x)…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Update 02/28/25. – A few people have had issues with this fitting their vehicle. It was designed to fit my Nov. 2023 R1S VIN 23 XXX. I don't know whether this is related to a change in the tow hook size by Rivian in later builds or a…
Wydruk około 6,83 €–8,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this bracket is to be mounted on the steering column on my Segway Ninebot Kickscooter MAX G30D II (Please note that im on a beginner level, when it comes to designing parts in fusion 360) Its a tight fit around the steering colom,…
Wydruk około 3,70 €–4,53 € nettoWstępna wycena jednego wariantu
A simple under desk mounting solution for the Focusrite Scarlett Solo (4th Gen) audio interface. I couldn't find any solutions that I liked for mounting, so I designed my own! This is also designed using Zoo's modeling app ! The included…
Wydruk około 5,62 €–6,87 € nettoWstępna wycena jednego wariantu
This is my design of fully functional corner brackets. I created them especially for the FFF process to be printed using PETG or ASA material. If these corner brackets are printed with the correct settings and materials, they can…
Wydruk około 1,65 €–2,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nachdem eine Halterung unserer Kleiderstange zerbrochen war, lagen die gesamten Kleidungsstücke unten im Kleiderschrank. Das passiert natürlich an einem Sonntag, alle Geschäfte sind geschlossen und wir wissen nicht, ob es überhaupt Ersatz…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE: (2024-11-25) I have added a version of the underslung right bracket with a full protective cover for the PD board. I have previously created a 22.5° remix of the MMU2 brackets due to my use of a cabinet and feeding from above.…
Wydruk około 2,34 €–2,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A bracket for mounting a collection bin (Akro/Uline type) under the exit ramp of a Lee Automatic Processing Press (APP) mounted to an InLine Fabrication Quick Change plate. The bracket indexes off the right mounting bolt on the APP and…
Wydruk około 2,01 €–2,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've developed these straightforward brackets to mount 19" rack devices vertically onto walls. My design stands out by creating a small air gap between the device and the wall for improved ventilation. The fully parametric Fusion360…
Wydruk około 5,67 €–6,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Making your own eurorack case? Then you might want a 1U row! Modeled this bracket based on the Intellijel 3U Z-Rail brackets so it's sized to work with M4 screws. Holes are countersunk as well for a nice flush mount. Attach the bracket to…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Microserver Gen8 SSD stacker The optional 7MM stacker so that you can stack two SSD's on top of each other. For use with Microserver Gen8 SSD bracket for four SSD's. Has text “7mm drives” printed onto the print. Made with Rhinoceros 3D…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Designed for Dell optiplex 7060 SFF with 8.gen intel processor (2018). Left and right side mount version. Safe lock protect before overturn. Designed for M5 countersunk head screw. I made it from PETG. 3 perimeters, 30prc infill.
Wydruk około 3,58 €–4,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I used wood screws and mounted it directly to the wooden board. Power supply uses similar bracket. Also cables are held up with zip ties using this easy print: https://www.printables.com/model/205265-cable-management-easy-solution
Wydruk około 9,30 €–11,37 € nettoWstępna wycena jednego wariantu
Movable z axis belt tensioner added bracket for filament sensor for Ender 3 V3 KE original screws can be used - cannot be used together with the original spool holder!!! Required parts: 1x M3 x 12mm 1x M5 Washer 2x F695 Bearings 2 parts -…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
EN: The bracket is suitable for mounting 20 cm wide shelves on drywalls. M5 dowels can be used as cavity dowels. The hole can be subsequently extended for larger M6 dowels. If you like my model(s) please leave me a like to support my…
Wydruk około 5,07 €–6,20 € nettoWstępna wycena jednego wariantu
When you are camping at night, it is really useful to be able to hang your lantern in your pop-up tent. This bracket attaches to the post and stays secure with a simple wedge fit. The bracket arm extends diagonally into the tent so your…
Wydruk około 4,41 €–5,39 € nettoWstępna wycena jednego wariantu
Simple design counter sunk holes for screws. 10% infill printed in PLA (esun). Ps. If you MAKE it and LIKE it, please POST a make. 👍😊
Wydruk około 2,29 €–2,80 € nettoWstępna wycena jednego wariantu
This is my design of fully functional angle brackets. I created them especially for the FFF process to be printed using PETG or ASA material. These prints require a well-calibrated printer and high-quality filament to be functional. If…
Wydruk około 1,02 €–1,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple bracket that can be printed as a half-height bracket for single-port Mellanox ConnectX-2 PCI cards. This is a remix of rasarmg's “PCI Bracket Generator” on Thingiverse , and is only a very small addition to it. If you…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Microserver Gen8 SSD stacker The accompanying 9.5MM stacker so that you can stack two SSD's on top of each other. For use with Microserver Gen8 SSD bracket for four SSD's. Has text “9.5mm drives” printed onto the print. Made with…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Led strip bracket for fan shroud.
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
A simple bracket to mount a CyberPower Surge Protector (model P704U) under a desk. The screws holes were sized for my #8 screws (5mm) - in theory, any #8 screws would work. Printing I used HatchBox Matte Black PLA filament @ 220C. I…
Wydruk około 2,19 €–2,68 € nettoWstępna wycena jednego wariantu
The files are made for a MMU3 (here with MK4) Whereas the Chars (I|O, + and -) are changeable Also the used Extruder, here Main (Display 1) = 3, I|O, + and - = 1 Bracket X for place for two additional mosfet (fan and Led strip) There is…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this part in onshape for mounting rear light (link in below) to my bike saddle. https://amzn.eu/d/aiM4XWi if you want to customize my design you can access the design here…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
Bracket to install fans (Noctua NF-A8) to cooldown your TV media cabinet. The fans are all connected together and controlled by an AC Infinity Controller with Thermal trigger.
Wydruk około 6,90 €–8,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a revision of my previous Prusa mini z-axis bracket a little bit lighter. 8mm thickness and improved exagonal cosmetics.
Wydruk około 4,73 €–5,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Spare Part for most whiteboards. Use the drilling at the downside and the oval drilling at the top of the whiteboard.
Wydruk około 3,76 €–4,60 € nettoWstępna wycena jednego wariantu
Remixed from IKEA Lack ATX PSU Mount by tjsc5f. Additional cutout for ECO Mode switch added for a perfect fit to my EVGA 650 GQ ATX power supply. Print instructions Printer brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution:…
Wydruk około 1,78 €–2,17 € nettoWstępna wycena jednego wariantu
I printed the brackets with glow in the dark PLA filament so my daughter can see the ladder steps better at night. Each of the brackets is pushed onto the ladder rung from the front and rear and screwed on with two screws. One of the…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
The default Reolink mount is designed for mounting to a wall with masonry screws or wall anchors. That's fine, but some applications need a clamping surface instead. This is particularly the case if you want to mount it onto a gutter, on…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have been looking for a good way to allow the base plate to drain on my Elegoo Saturn resin printer. I tried the one by Luca, ( https://www.printables.com/model/552669-elegoo-mars-3-3-pro-build-plate-45deg-dripping-sup) but it didn't…
Wydruk około 1,62 €–1,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After drilling a unnecessary 10mm hole in my filament box, I decided to use it as a mounting point for a hygrometer. So here is the bracket. Printed with 0,15mm in PETG Original Onshape Project right here:…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Strong corner bracket Coin de blocage à visser.
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
a small multi-purpose angle bracket (36mm x 30mm x 38.5mm)
Wydruk około 0,76 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After designing the CPAP hook , I was asked to also make a bracket which allows to hold and guide the hose for convenient use. The hose snaps in nicely and sits firm but not too tight and allows for little adjustments in length. Mounted…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
printed a few others from around the place, but as ever, couldn't find one that was just right, so we designed our own. two versions, one with a two mm gap, which wobbles a little, one with a "spring" to make things wobble less. think…
Wydruk około 1,34 €–1,64 € nettoWstępna wycena jednego wariantu
Simple Bracket to install a webcam on the Prusa Mini. WebCam Model: Microsoft LifeCam HD-3000 Its purpose is to offer a clear view of the nozzle and layers. Here's an example of what you could see during printing. Because the Cam is…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena jednego wariantu
Do you know “Flying” power strips because the cords are too short or clutter on the floor. With this easy to print wall bracket / stand bracket you have a better "home" for a power strip. Fix it with two or four screws on the wall or…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I built this angle for a makita 18V battery model to hang on the wall. The battery model is from this maker: https://www.printables.com/cs/model/25617-makita-wall-mounts-holders-for-battery-and-tools-1%2Fcomments
Wydruk około 8,61 €–10,52 € nettoWstępna wycena jednego wariantu
This support is permanent and therefore always ready to receive the tray. Very convenient when you already have a busy hand. Printing: PLA, no support, 100% cooling, no special precautions. Place it 5cm from the front. Print Settings…
Wydruk około 1,49 €–1,82 € nettoWstępna wycena jednego wariantu
Bracket designed for my SUNLU FilaDryer S1 Plus Drybox. So that I can place it on my Ankermake MC5. Please note that placing this bracket is tight, but it all fits very well. You can move them once you have placed them. Top Bracket is…
Wydruk około 1,83 €–2,23 € nettoWstępna wycena jednego wariantu
Wife wanted a way to store the sprayers without them falling over or getting tangled in their tubing. Position upside down on the build plate to avoid supports. Recommend PETG or ASA if in barn or shed. 4 or 5 walls with 20% infill should…
Wydruk około 8,95 €–10,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was looking for a commercial made vinyl siding bracket to mount an Arlo wired video doorbell but could not find one. So I made one. I’m including a step file for anyone that wants to mod this, should make it easier. I used 4 perimeters…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
![Prusa Mini - Webcam Bracket [Microsoft LifeCam HD-3000]](https://media.printables.com/media/prints/266287/images/2372282_53a8f52f-bd66-4ee3-8ed8-b10978ce0876/prusa-mini-braket-for-cam-v2.png)
