Wyniki wyszukiwania: bumper

Sortowanie

2225 modeli

P
PrintablesThomas

Autodrom/Autoscooter/bumper car Chip

Printed on an Ender 3 V2 20% infill Rafts Support Surface Ironing enabled, 10% extrusion PLA, 201°C Nozzle, 60°C Bed There are a lot of these types of Models online, take a look the first picture to see if your dimensions match with my…

Pobrania
1249
Polubienia
60
Ocena
4,75
P
PrintablesQ

Safety Door Stopper/Bumper V2 (2023 Design) - 7 sizes & clip for creative design

The Safety doorstop prevents the door from slamming abruptly by gently cushioning it. This can, for example, prevent small children's fingers from being crushed when the door closes due to a gust of wind. This also prevents glass breakage…

Pobrania
927
Polubienia
282
Ocena
4,83
P
PrintablesDan

Prusa XL screen guard LCD bumper status bar dual color

Remodeled the whole thing and wanted to give everyone the freedom to do adjustments themselves.

Pobrania
393
Polubienia
75
Ocena
5
P
PrintablesQ

Safety Door Stopper/Bumper V1 (2019 Design)

The Safety Doorstop prevents the door from slamming abruptly by gently cushioning it. This can, for example, prevent small children's fingers from being crushed when the door closes due to a gust of wind. This also prevents glass breakage…

Pobrania
277
Polubienia
113
Ocena
5
P
PrintablesAlejandro

XRP Bumper

Designed to install in the front side holes. Made of PETG for correct absorption of energy in impacts. With these bumpers we can avoid damage to the structure of the robot in the event of a collision. I hope you find it useful.

Pobrania
157
Polubienia
30
Ocena
0
P
PrintablesBen

SCX10 III Basecamp Front Bumper -- Pinched

This is a front bumper that allows for good approach angle and has a much narrower profile then the original. My front bumper kept getting caught on the tires, so I designed this. I used PETG-CF as the main material and used PLA for…

Pobrania
150
Polubienia
17
Ocena
5
P
PrintablesBrian

Surface Duo 1 Slim bumper (two sets)

Slim Bumper version of the Surface Duo 1 bumper I uploaded. This is based off someone that owned a Duo 1 in which they were fine with the fit. This is two sets of bumpers. One leaves the button area and all the usb area open. The other…

Pobrania
138
Polubienia
5
Ocena
0
P
PrintablesDrakein3D

Improved Casio DW1000 Replacement Bumper/Bezel

Print this with the face laying on the bed. I recommend .15 or thinner layers to get enough material down. This is an application where a LESS stiff material like PETG is probably better than PLA. I have had good luck with all sorts of…

Pobrania
125
Polubienia
6
Ocena
0
P
PrintablesRom1

Mini-Z MR03 Front bumper

I designed this Mini-Z MR03 Front bumper for Jomurema GT-01, compatible with aluminium front lower suspension.

Pobrania
73
Polubienia
6
Ocena
0
P
PrintablesAinon3Dtisk

RC car RMT Land Rover T98 rear bumper

Hello, Welcome to my profile, full of models and miniatures :-) I have for you an RC car RMT Land Rover T98 rear bumper. They are suitable for beautifying your RC model. They are in 1:10 scale. No glue is needed to install them, they hold…

Pobrania
72
Polubienia
5
Ocena
0
P
PrintablesJoergH

Metabo LB18 Laubbläser - Kurzes Rohr Düse mit Bumper - Secure Stubby Nozzle - Leaf Blower nozzle - Detailing

Kurzes Rohr mit Düse zum Abtrocknen von Autos - Mit Bumper um nicht versehentlich den Lack zu zerkratzen. Wird wie das Original mit der roten Taste verriegelt. Es gibt jeweils Dateien für einen 2 color Druck als auch einfarbig. Der Bumper…

Pobrania
69
Polubienia
11
Ocena
5

Rear Bumper for Bamboo Winch Truck

Rear Bumper with winch from Aliexpress and Hitch for trailers. https://www.aliexpress.com/item/4001275874900.html?spm=a2g0o.order_list.0.0.519018028Aaak2

Pobrania
62
Polubienia
10
Ocena
0
P
Printablescrashkg

Replacement Bumpers for Ridgid Tablesaw Fence

The Original Ridgid TS3650 Tablesaw is great except for one issue. The fence. It never stays square to the blade. This is because the little bumpers under the fence have very little surface area to clamp to the rail. I increased the size…

Pobrania
52
Polubienia
12
Ocena
0
P
Printablesdv

Print-in-place iPhone 12 bumper case

The print is designed to encase the phone itself. For achieving this, an “interface layer” has to be added to create the encasing geometry. Here's the process: First, print the interface layer and let the build plate fully cool down…

Pobrania
42
Polubienia
12
Ocena
5
P
PrintablesKiwibloke

Shower door bumper block stops

Some shower doors are made up of two or more vertical door sections. These sections slide past each other. The bumper block stops provide a small buffer to stop and cushion the sections when the door when is slid opened or closed. The…

Pobrania
37
Polubienia
5
Ocena
0
P
PrintablesJohn Begovich

Audi/Smart Car Plastic Bumper hole Cover

Print with supports, flat face down.

Pobrania
22
Polubienia
4
Ocena
0

Rear bumper for Winch Truck for AliWinch

Remodeled Winch Truck bumper for winch from Aliexpress. https://www.aliexpress.com/item/4001275874900.html?spm=a2g0o.order_list.0.0.519018028Aaak2

Pobrania
22
Polubienia
3
Ocena
0
P
PrintablesBrian

Surface Duo 1 Bumper (covers sim card slot and adds protection on opposite side of USB)

This bumper has more coverage as it covers the Sim card slot and also protects the opposite side of the USB port. ***Simple Bumper for the Surface Duo 1, BUT… I modeled it off the Duo 1 stock bumper as I do not have a Duo 1 any more.…

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesHaysar

Reely RaVage Bumper Holder /Stossfänger Halterung (Front)

Das ist eine Halterung für den Stossfänger an der Front des RC Cars ‘ Reely RaVage ’. Bei meinem Sohn ist diese Halterung leider gebrochen und ich habe sie nirgends als Ersatzteil gefunden. Gedruckt habe ich in PETG mit einem MK4S MMU: no…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesMike B.

DAF YA66 - "18" paint stencil for front and rear bumper

Paint stencil for number "18" on the bumper of a DAF YA66 military car.

Pobrania
13
Polubienia
2
Ocena
0
P
PrintablesIan Foulds

Vehicle Ski Bumper (Magnetic Rack)

This ski bumper attaches to the side of your car with strong magnets and is a temporary rack while you are getting yourself organized. We have all leaned our skis against the car only have them fall over. This ski bumper is the answer to…

Pobrania
12
Polubienia
5
Ocena
0
P
PrintablesHighTechRedNeck

XL Screen Bumper (New LCD)

Updated to have no bottom in the screen protector. This accomplishes two things. First and foremost the new style LCD fits. Other than that it makes it easier to keep neat and tidy without having tiny bits of filament caught in the tray…

Pobrania
11
Polubienia
5
Ocena
0
P
PrintablesREMLURELMI

Patio Chair Stacking Bumper

Recommended print settings: Material: PLA/PETG Layer Height: 0.20 (SPEED) Infill % : 15+ Supports: Yes, Tree/Organic Print Orientation: Default as modeled Perimeters : 5 This design is a replica of some small plastic pieces that came with…

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesRobertDaleSmith

FeatherWing Quad 2x2 Mini Bumper

A bumper for Adafruit's FeatherWing Quad 2x2.

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesCNC Kitchen

Corner Bumper (no supports)

Corner bumper prints without any supports. Use a hard TPU if possible but even some regular PLA is better than nothing. If you have adhesion problems use a brim. Use some double-sided tape to attach.

Pobrania
5870
Polubienia
2791
Ocena
4,9
P
PrintablesKucici

DJI Avata 2 Bumpers

Compatible with propeller shields: https://www.printables.com/pl/model/867950-dji-avata-2-propeller-shields Print with PLA , and secure with cable tie. 17.5 g each Note about left and right files: They are almost identical. After putting…

Pobrania
3581
Polubienia
354
Ocena
4,67
P
PrintablesFluki

Apple® iPhone XR case and bumper

D: Schutzhülle für das Apple iPhone XR. Ich habe zwei Modelle gezeichnet eines mit Rückseite und eines ohne (Bumper-Hülle). Ich habe die Hülle in PLA als harte Hülle und in FLEX als flexible Silikon ähnliche Hülle gedruckt. Die Hülle ist…

Pobrania
2322
Polubienia
89
Ocena
4,8
P
PrintablesDoc Brummbär

DJI Avata Bumper komplett

Aus dem Remix von BanditFPVprints geremixt komplett umlaufend zusammengebaut mit Tinkercad. Ausdruck in TPU, Hält wie das Original auch ohne klebeband.

Pobrania
2048
Polubienia
138
Ocena
5
P
Printablesmahluni

Bumper / Kantenschutz für navimow i Serie - i105e und i108e

Einfacher Kantenschutz für die navimow i Serie. Sie sind straff entworfen, so dass ein Aufstecken genügt. Es ist kein Schrauben oder Kleben erforderlich. Ich habe mit PETG gedruckt / 100% Infill

Pobrania
1356
Polubienia
64
Ocena
4,75
P
Printablestrrevvorr

Yet Another Apple Watch Stand With Rubber Bumpers

Remix of Yet Another Apple Watch Stand with holes on the bottom for rubber bumpers (I used 10mm diameter, 3mm thick adhesive rubber bumpers)

Pobrania
1345
Polubienia
72
Ocena
4,83
P
PrintablesCoolworlds

Nothing Phone (1) Bumper Case

Hiya! This is a printable Bumper case for the Nothing Phone (1). I wanted a case for it but couldn't find any available at launch so I just made one ;) This is designed in a way that's a little on the thick side. But has cutout's for the…

Pobrania
1326
Polubienia
52
Ocena
5
P
Printablesdaver18qc

1/10 Scale Bumper Jack SCX10

* UPDATE: I made V2 with looser tolerances, V1 was a bit tight and needed too much sanding to fit. * UPDATE2: V3 further enhances strenght, more space for the foot bolt too. Length : 127mm Base : 17mm X 17mm Should be pretty perfect scale…

Pobrania
1317
Polubienia
315
Ocena
4,89
P
PrintablesSMACKMAX_

Slab stand - PSA Slab Bumper with stand - Pokemon card Stand

Older model i never Published PLA: Fiberlogy Printer: CE 6 Program: fusion 360, made to protect the PSA slabs, print needs support, slide in carfully (slight presure fit) Enjoy, non comercial

Pobrania
1242
Polubienia
180
Ocena
0
P
PrintablesViktor Fortun

xbox series controller 1914 bumper repair fix

i got really tired of thin pushers on 1914 bumper, that brake in like 5 min of usage. so i designed spacers u can print youself. they fit tight and not tend to break, cuz they are not part of bumper itslef. place seam on the back(up)…

Pobrania
1230
Polubienia
66
Ocena
4,43
P
Printablesastosia

Pebble Time 2 screen edge bumper

A very quick to print edge protector for the raised edge on the pebble time 2 screen. Scale the model up or down slightly to get the best fit. Pictures show galaxy black PLA using a 0.6mm nozzle, and orange and matte blue PLAs using a…

Pobrania
1149
Polubienia
107
Ocena
5
P
PrintablesCarlRoos

DJI Avata 2 Bumpers - Remix from Kucici

This is a remix of the great DJI Avata 2 bumpers from Kucici. I did make a slight modification which prevents having to use cable ties. I simply added a lip to the bottom support which allows the bumper to clip perfectly in place and is…

Pobrania
1146
Polubienia
66
Ocena
5
P
PrintablesCarlRoos

DJI Avata 2 Bumpers with Propeller Guards

This version combines Kucici's excellent DJI Avata 2 Bumpers and Propeller Guards into a single model with the addition of clips to hold them firmly in place on the DJI Avata 2. Propeller guards have also been modified to provide better…

Pobrania
1098
Polubienia
74
Ocena
4,8
P
PrintablesIPCreative

DJI Avata 2 Gimbal Bumper

Bumper guards for DJI Avata 2, fits in original holes but you will need 4 longer screws M1.6x10mm. Printed with PETG 100% infill, 0.15 layer, without supports.

Pobrania
1062
Polubienia
87
Ocena
0
P
PrintablesCNC Kitchen

Corner Bumper (TPU Optimized)

A variation of my other corner protector, optimized to be printed in TPU. Use “Avoid Crossing Perimeters” to get rid of any stringing. Scale it for your application.

Pobrania
1059
Polubienia
306
Ocena
4,93
P
PrintablesKyne

Bumper Car Chip Autoscooter Jeton

It is difficult to print this accurately since there is no good orientation. The originals (in colour) are most probably injection moulded. I printed it horizontally , the top side came out amazing with ironing but the bottom side…

Pobrania
991
Polubienia
27
Ocena
5
P
PrintablesJoza

Bumper shackle for Traxxas TRX-4M (TRX4M)

A simple shackle for my Traxxas TRX-4M Defender bumpers. Printed in resin and painted. Paper clip can be used to be pressed in to fasten it to the bumpers. Drop of glue might be needed at the ends to secure the paper clip in (I did not…

Pobrania
972
Polubienia
95
Ocena
5
P
PrintablesMatīss Rapša

Google Pixel 7 Pro Bumper case

Google Pixel 7 Pro Bumper case the same as Rhinoshield made 5 years earlier, I really wanted to have the same awsome thing they made for my pixel 3. The fit is really thight, if printed with PETG I recomend to scale it up 0,5 % or 1%…

Pobrania
963
Polubienia
100
Ocena
4,6
P
PrintablesHelp93

Xbox One Controller Bumpers

This was remixed from RaffoSan's original & pbpunk's (From Thingiverse) Designs to create a more ascetically pleasing bumper set. I have 2 versions, A single-piece drop-in setup, and a 2 piece left & right. This may require more finesse…

Pobrania
915
Polubienia
42
Ocena
5
P
PrintablesDouggie

TBS Source One V5 Bumper

Fits the TBS source one V5. A simple bumper to keep the bottom plate from being smashed up in a crash. Print in TPU with the opening down and supports for the holes only. Use the printer settings that work best for your printer.

Pobrania
913
Polubienia
64
Ocena
5
P
PrintablesTOASTYMO

Samsung Galaxy S20 FE Bumper Phone Case

I couldn't find any S20 FE phone cases online and decided to make my own. This design was made do be an improvement of my previous design linked below. The case once printed should easily pop onto your phone one corner at a time (ending…

Pobrania
905
Polubienia
51
Ocena
4,9
P
Printablesoclastax

TRX4M Low Profile Bumpers, Bumper Delete and Hinged Body mod (STEP availible)

UPDATE 05/07/2025 : the step files are now available ! I originally created this high clearance / low profile bumper for the Trx4m Bronco to solve the issue of poor attack and departure angle, as well as to reduce rubbing of the wheels…

Pobrania
868
Polubienia
102
Ocena
5
P
PrintablesRoboDoc

Pebble Time 2 - Refined Bumper Case

I used the recently released parametric CAD files from Core Devices (thanks, Eric!) to design a sleeker Bumper Case from scratch. I printed this with a 0.1mm layer height on my Prusa Core One and Prusa Mini. I've successfully tested it…

Pobrania
836
Polubienia
65
Ocena
4,86

Voron V0 Kirigami Stealth Bumper

Compatible with: V0 Kirigami Bed Salad Fork / Tri-Zero / Pandora's Box anything with an extrusion to attach it to Supports the Rainbow Barf Logo LED or a Neopixel Mini Button BOM Item Qty. M3x5x4 Heatset Insert 2 M3 Hex Nut 2 M3x6 BHCS 4…

Pobrania
831
Polubienia
144
Ocena
4,93
P
PrintablesRapidSpatz

Bosch KIOX Protector / Bumper Case

My wife had a fall damage on her little Bosch KIOX and I thought it could help some bikers to get a protection case. It was a challenge to copy the shape and it took some iterations of the design, but here it is: A formfitting case to…

Pobrania
825
Polubienia
85
Ocena
5
P
Printablesmattiabiondi

Bumper cars - token and parking key

Bumper cars SCAD files and STLs for bumper cars tokens and parking keys. These files should be compatible with hardware produced by "SOLI Bumper Cars" , which can be commonly found (AFAIK) in the Northeast area of Italy. Token Tested and…

Pobrania
806
Polubienia
29
Ocena
5
P
PrintablesKatharsis

TOPLINE 1/10 Mazda FC3S RX-7 Body Accessories (GT Wing, Spoiler, Pop Up Lights, Front Bumper Support)

This is a compilation of body accessories I designed for the TOPLIINE FC3S body I'm using on my 1/10 RC drift car. Pop-up assembly: All of these parts can be attached with clear Gorilla double-sided mounting tape. It is strong enough to…

Pobrania
752
Polubienia
103
Ocena
5
P
PrintablesJeff Chen

iPhone 14 Pro Slim Bumper Case

I have got myself an iPhone 14 Pro. Naturally I need to make this, just like 2 years ago ;) I added two cat ears to make sure when set on a flat surface, the cameras will have a 0.5mm clearance, and the entire phone doesn't teeter-totter…

Pobrania
727
Polubienia
69
Ocena
5
P
PrintablesEric W

Roomba Bumper Extension

Roomba robot vacuum bumper extension prevents robot from getting stuck under furniture. Attach with VHB tape to the top of the bumper. Window allows IR sensor to find docking station.

Pobrania
695
Polubienia
66
Ocena
5
P
PrintablesAudi

N Scale Bumper

This was designed to be functional first, then aesthetically pleasing, with realism and scale being my least concern. I wanted a "bumper" that was actually a wheel stop. I did not want my couplers crashing into anything, and I didn't…

Pobrania
639
Polubienia
83
Ocena
4,67
P
PrintablesJr. Hames

iPhone 15/16 Pro/Pro Max Minimalist Camera Bumper

I'm not very fond of full-on cases, not to mentioned that they make the already large iPhone 15/16 Pro Max huge. I had already designed a bumper for my Apple Watch Ultra 2 (check my profile) and thought of doing the same for the iPhone…

Pobrania
632
Polubienia
44
Ocena
5
P
PrintablesMa24

Redmi note 13 cover and camera bumper.

Redmi note 13 cover and camera bumper. Please read the text file before the customizing.

Pobrania
628
Polubienia
18
Ocena
0
P
Printablesgabe

iPhone 13 Pro Max Bumper Case

This is a model for a bumper case for the iPhone 13 Pro Max. It has a strap in the back to help you hold it with one hand. I printed it in TPU with a 0.15 mm height. It does need supports.

Pobrania
623
Polubienia
59
Ocena
0
P
PrintablesPatrick Hart

Iphone 15 Pro Max Bumper Case

Iphone 15 Pro Max Bumper Case made in Fusion 360 you can probably get away with no supports but still easy to remove.

Pobrania
619
Polubienia
34
Ocena
4

Simple bumper case for Pebble Time 2

This was made by modeling a simple outer geometry, then subtracting a slightly-enlarged mesh of the watch from the official Pebble repo. This was a quick and dirty lunch-break project, so there is a lot of room for improvement I'm sure.…

Pobrania
595
Polubienia
60
Ocena
5
P
PrintablesKnowicz

APEX Evo 5 GoPro mount and front bumper

Supports: No Resolution: 0.2 Infill: 20%

Pobrania
592
Polubienia
18
Ocena
5
P
Printablesdildesigns

R36S TPU Sleeve / Bumper Case

Keeps the R36S protected pretty well! Print with the screen side up, paint supports near the triggers and around the smaller button holes. Have some precision scissors ready to get rid of stringing! I printed this with Overture high speed…

Pobrania
588
Polubienia
90
Ocena
5
P
PrintablesMicah

Glock 17 Holster with TPU Bumpers

Use a 25mm M3 bolt and nut and an 8mm diameter spring.

Pobrania
576
Polubienia
70
Ocena
4,5
P
Printablesstevenmarx

Fairphone 4 Cases, Bumper & Card Wallet

The first design (dummy) was created by Paperpilot and was discussed here . I have remixed the design from Warc , adapted it and made it ready to print. Thank you for the work. I moved a few things around until it fit for me. From that I…

Pobrania
559
Polubienia
58
Ocena
4,67
P
PrintablesMacNavy

controller per Xbox Series S Bumper LB RB

da stampare con materiali resistenti come il PETG-CF, nel mio caso ha funzionato benissimo. Ho voluto postarlo anche qui in quanto il modello è presente solo su makerworld Ringrazio l'autore “ Sade Daniels ”

Pobrania
556
Polubienia
19
Ocena
0
P
PrintablesSDHayes

HO Scale Bumper

Clips on to the track pretty nicely.

Pobrania
546
Polubienia
80
Ocena
5
P
PrintablesM.D.M.

[ITA] Gettone Autoscontri - [ENG] Bumper Cars Token

[ITA] Dimensioni: Diametro Gettone : 34.88mm Diametro Estrusione Interna : 21.55mm Diametro Foro Interno : 10.91mm [ENG] Dimensions: Token Diameter: 34.88mm Internal Extrusion Diameter: 21.55mm Internal Hole Diameter: 10.91mm

Pobrania
546
Polubienia
19
Ocena
0
P
PrintablesRobertoooo

Creality CFS Roller Bumper / Pusher / Tensioner / Adapter for better spool stability

This add-on improves the filament retraction of the spool in Creality CFS, by eliminating the friction between the factory bumpers and the spool, which can become problematic as spools get lighter with less filament on them. Also no more…

Pobrania
537
Polubienia
131
Ocena
5
P
PrintablesJerry Lee

Apple TV 4K remote bumper

Update: shout out to @kull_1740928 with a great suggestion. Added D-pad offset. Apple TV 4K remote TPU bumper will help protect your remote control from nicks and scratches. Also easier to hold the remote. Printed using TPU with no supports

Pobrania
525
Polubienia
78
Ocena
4,82
P
PrintablesJoseph Fraser

7 - 7.5 inch FPV Drone Prop Guards and Bumpers

**Work in Progress** Tested** *Updated - May.25.23 *Made For iFlight Chimera7 Pro V2. Can fit other 7-7.5 inch models, Verify yourself** • Prop Guards V6.4 - I added MT30 Connector Holders with 2 Zip Ties slopes. • Prop Guards V6.3 - I…

Pobrania
518
Polubienia
36
Ocena
0
P
Printablespetther

Bumper for PARKSIDE PMRA 20

Vodící lišta pro sekačku PARKSIDE PMRA 20

Pobrania
514
Polubienia
30
Ocena
5
P
PrintablesStrankler

Bumpercase for Google Pixel 6

This Case is designed as flexible Bumpercase to protect your Google Pixel 6 against minor impacts and hits. The backside is as thick as the camera kit protrudes, so you have a homogeneous flat surface. It has cutouts for the speaker /…

Pobrania
501
Polubienia
46
Ocena
4,86
P
PrintablesDylan C

Olympic Barbell Vertical Wall Mount + Bumper

I really liked Todd Pousson's design for an Olympic Barbell Vertical Wall Mount , but wanted to mount the barbell holder on a brick wall and use larger bolts to secure it. I designed the mount from scratch and added in the required holes…

Pobrania
495
Polubienia
65
Ocena
5
P
PrintablesHarleyA

2020 Extrusion LED Light Bars, wire duct, wire management & bumper.

This was inspired by a similar concept but is a totally designed from the ground up using OneCNC XR7 software. In searching for a suitable LED lighting solution for my Ender 5, I couldn't come up with just the right combination. So I…

Pobrania
490
Polubienia
82
Ocena
4,5
P
PrintablesMadu

Miyoo Mini TPU Bumper

I printed this in 85A TPU with supports.

Pobrania
486
Polubienia
43
Ocena
4,67
P
Printablesyzfr6drw

TT02 TPU Bumper

Tamiya TT02 TPU Bumper that fits Bitty Design Hyper-HR body. Printed in 95A shore TPU. Category: R/C Vehicles

Pobrania
479
Polubienia
34
Ocena
5
P
PrintablesEnDiMa_Designer

Flipper Zero soft TPU bumper See-through

This bumper for Flipper Zero was designed specifically for all the transparent variant or customized transparent mods. The cover is 2mm thick and to facilitate insertion, I recommend using filaments that have a hardness equal to or lower…

Pobrania
478
Polubienia
79
Ocena
5

wall bumper for vacuum cleaner

modular fast and easy to print flexible wall bumper for a vacuum cleaner

Pobrania
469
Polubienia
26
Ocena
5
P
Printableskcarhart

Nazgul5 v2 - XL5 V5 Frame Arm Guards / Bumpers

Tried to make this as true to the original as possible. This fits a Nazgul5 v2 perfectly. Print with no supports in the original orientation I have provided. For a full set, print two of the left and two of the right. I highly suggest…

Pobrania
464
Polubienia
24
Ocena
0
P
Printablesk-eye

Apple TV Remote Bumper Case

Just another Apple TV Case... If you, just like me, always touch the wrong side of your Apple TV Remote and you're always wondering why nothing is happen, this case may be useful.... I closed the "untouchable" side of the case, so there…

Pobrania
462
Polubienia
66
Ocena
4,67
P
PrintablesMoshe

IPhone 11/XR Bumper Case

Remix of https://www.thingiverse.com/thing:4946346 to remove back and make it compatible with the IPhone 11 Print Settings Printer: Biqu B1 Rafts: No Supports: No Resolution: 0.15 Infill: 100% Filament: 3DJake TPU Orange Category: 3D…

Pobrania
456
Polubienia
37
Ocena
0
P
PrintablesRoboDoc

Pebble Time 2 Simple Bumper Case (Snap-Fit)

I added some small brackets to the bottom to secure the bumper to the watch. This is a quick and dirty remix. It could use some refinement, but @astosia might come up with a nicer version soon anyway. Needs to be printed face down, it…

Pobrania
453
Polubienia
48
Ocena
4,88
P
PrintablesOxmstr

WLToys 144001 Front Bumper

Modified the original design to accomodate the upper 2 screw holes, making it more sturdy. 299 174 10.07 Category: R/C Vehicles

Pobrania
451
Polubienia
38
Ocena
5
P
PrintablesGonzoStrange

The Last X-Maxx Bumper Mounts

Tired of buying and replacing the bumper mounts every time you turn on your X-Maxx? I was so I modeled up these bumper mounts. Hopefully these will be the last bumper mounts you will ever need. Front and rear mounts are included. Print…

Pobrania
449
Polubienia
40
Ocena
0
P
PrintablesJindrove

Loona Petbot Face Bumper

The Keyi Tech made a funny Petbot which is called a Loona . But still, it is a robot.. Sometimes made crazy things and could damage yourself. So, I made a Face Bumper to take care of her front display and other parts around it. After tons…

Pobrania
448
Polubienia
20
Ocena
4
P
PrintablesSIERRASTRIKE

Xbox Elite Controller Series 2 Bumper repair spacers

Bumper contacts get bent from hard use or being dropped. Print these, pop the top on controller and install. These are approx. 6mmx7mmx2.7mm thick. I printed in PLA+, 100%infill, with 8mm brim for good bed adhesion. 6 minute print

Pobrania
448
Polubienia
54
Ocena
5

Pixel Watch Bumper Case v2 (now with TPU version)

This is a bumper case for the Pixel Watch 1 (41mm). The case comes up above the surface of the glass by 1mm, but far enough out to not affect swiping gestures. Holes are made for the microphones and speaker, and a cutout around the button…

Pobrania
443
Polubienia
59
Ocena
5
P
PrintablesSFS

iPhone 17 Pro Max Dual-Material Bumper Case (IDEX TPU + PLA)

This is a hybrid dual-material bumper case for the iPhone 17 Pro Max, inspired by Apple’s original bumper case and redesigned for modern camera bumps, MagSafe, and multi-material 3D printing. The case is designed specifically for IDEX…

Pobrania
440
Polubienia
21
Ocena
4
P
Printablesgabe

iPhone 14 Pro Max bumper case

This is a bumper case for the iPhone 14 Pro Max. It protects the lenses and lets the phone lay flat on a table. It is meant to be printed in TPU. It's quite a difficult print. The included 3mf file has the settings I used in PrusaSlicer.…

Pobrania
437
Polubienia
41
Ocena
5
P
PrintablesKarel2003

Logitech G29G923G290G27G25 foot pedal bumper

Protects your pedal cable, preventing it from being crushed against the wall when breaking. Essential modification for those who don't have a cockpit.

Pobrania
434
Polubienia
64
Ocena
5
P
Printableswgcv

Apple Watch Serie 8 / 7 41mm Case Bumper

Based on https://www.printables.com/model/452840-apple-watch-8-7-41mm-case-perfect-fit-with-step-fi , this case perfectly matches the contours of the watch to create a firm snap-on fit with round borders. Works with any 41mm Apple Watch…

Pobrania
425
Polubienia
33
Ocena
5
P
PrintablesLukas Oktaba

Bash Bar RC bumper drift

hello . i created a bash bar , rear bumper for drift rc models

Pobrania
419
Polubienia
44
Ocena
0
P
Printablespbechard

N-scale Track Bumper (1:160)

This is a really fine track bumper for N-scale model railroads. It's measurements are based on the Walthers model that is commercially available. I suggest printing on a resin printer. Included is an STL file of 10 bumpers with supports…

Pobrania
414
Polubienia
56
Ocena
5
P
PrintablesTomek

TPU shelf corner bumper

When I hit myself in head I decided to print soft bumper for sharp edges of my shelf. I wasn't happy with the designs that were available on Printables so i decided to design my own project from scratch. The main difference is that walls…

Pobrania
413
Polubienia
121
Ocena
5
P
PrintablesDevNull8

Kallax Record Bumper

Created to keep all my records in line. Records are kept about 2.5 cm from front of the shelf. This is a pressure fit which holds well enough but if you are moving lots of records in and out the bumper can be pushed back. Suggest using…

Pobrania
412
Polubienia
119
Ocena
5
P
PrintablesRT3D

Roborock S5 Max Bumper

Recently purchased the Roborock S5 Max and I noticed it would be caught in one of the bedrooms which had a metal hammock with tubular frame. The robot would go over it and get stuck. You can set a no go zone, but I still wanted to have it…

Pobrania
409
Polubienia
48
Ocena
4,83
P
PrintablesAdafruit

iPhone 11 Pro Bumper Case

NinjaFlex colors: https://www.adafruit.com/category/783 Edit the Fusion 360 file: https://a360.co/2m5mhRS Flexible bumper case for the iPhone 11 Pro. Tested in NinjaFlex 85A and Cheetah TPU 95A. Features raised outlines to keep the screen…

Pobrania
409
Polubienia
40
Ocena
3
P
Printablesmbe075

mAx Team Bull Bar Bumper Upgrade for 3D SETS Model 14 (Max Team)

Warning Already printed but not yet assembled with all the Max Team van. Modeling seems to be ok but it should be tested in the real life. Definition C1 is the bottom color, C2 the middle one and C3 the top one. Printing Is required the…

Pobrania
404
Polubienia
46
Ocena
4,83
P
PrintablesMichael

Anschlagpuffer Bumper similar to Opel 0176731 GM 24427457

German: Anschlagpuffer Heckklappe für z.b Opel Vectra C Teilenummern: Opel-Nummer: 0176731 GM-Nummer:24427457 English: Bumber tailgate for example Opel Vectra C Part Numbers: Opel-Nr: 0176731 GM-Nr:24427457 Note: This is not a original…

Pobrania
399
Polubienia
7
Ocena
5
P
PrintablesScav

Samsung A52 bumper corner case

I needed a sturdy, yet relatively low profile case with tactile buttons and couldn't find an existing model. I printed it in NinjaFlex with a Shore hardness of 85A. Print settings: 0.2mm layer height 3-4 walls 20% infill NO supports!…

Pobrania
397
Polubienia
23
Ocena
5

TRX-4 Sport bumpers

*** EN *** Brand new bumpers for the TRX-4 Sport in a slim design for DIY 3D printing. I created new slim bumpers for the TRX-4 Sport. Traversability through the terrain will improve a lot, because the slim bumpers will not catch on roots…

Pobrania
386
Polubienia
62
Ocena
5