Wyniki wyszukiwania: caddx

Sortowanie

215 modeli

P
Printablesolex

DJI FPV / Caddx Vista / Air Unit pan/tilt gimbal mount for FPV aircraft

This is a very simple two-piece pan/tilt gimbal for a Caddx Nebula Nano (the standard camera shipped with most Vista kits) or any other 14mm wide camera, a standard-sized 9g pan servo (ideally one with 180° of rotation or more), and a…

Pobrania
1287
Polubienia
124
Ocena
5

Walksnail Moonlight and Caddx GM3 Gimbal Mount with Fan and Cage

Just a simple mount for the Walksnail VTX and new Caddx GM3 Gimbal that you can use or modify to fit your needs. It has an additional mount for 40mm cooling fan, because the Moonlight VTX heats up very quickly without an active airflow.…

Pobrania
950
Polubienia
51
Ocena
4,75
P
Printablesedwardsch

Tressym Joker tinywhoop canopy (supports DJI O4 Lite, BetaFPV P1, HDZero Lux, HDZero Eco, NBD BeeEye, BetaFPV C03, Tinywhoop Pinch, Caddx Ant Lite)

In tinywhoop racing, every last hundredth of a gram counts. But you can't have your camera break in a crash either. You need to find the right balance between durability and weight. That's what the Joker is for. Material: TPU95A. For me,…

Pobrania
403
Polubienia
35
Ocena
4,5
P
PrintablesspectrexFPV

CaddxFPV Walksnail Moonlight VTX Mount for TBS Source One V5

CaddxFPV Walksnail Moonlight VTX Mount for TBS Source One V5 Made possible with @Dtuned_2160698 Features: Full protection of the Moonlight Support dual antennae setup Cutouts for port access Slit and zip tie step for easy and flexible…

Pobrania
395
Polubienia
22
Ocena
0
P
PrintablesDickie_does

Walksnail Caddx Avatar FPV Camera Lens Protection

fits the following Walksnail Avatar Caddx cameras with 14mm camera lens body Walksnail Avatar HD Nano Camera V3 Walksnail Avatar HD Mini 1s Lite Camera Walksnail Avatar HD Micro Camera Walksnail Avatar HD Pro Camera Walksnail Avatar HD…

Pobrania
290
Polubienia
17
Ocena
0
P
PrintablesNoahLikeTheArk

Tiny Whoop Camera Mounts - Caddx Ant, Foxeer Pico, FX965TW Pitch

Camera mounts for: Tiny Whoop FX965TW Pitch (11mm x 11mm) Foxeer Pico (12mm x 12mm) Caddx Ant (14mm x 14mm) FPVCycle 199C (12mm x 14mm) I've printed the 30 degree mounts without supports. The top bridge is the hardest, it may need to be…

Pobrania
279
Polubienia
25
Ocena
0
P
PrintablesPrintedForFun

Caddx Walksnail Pro Camera Protector

Printed from ABS or PETG for optimal strength. Friction fit to the camera lens and body. Adapted the design to fit on the Walksnail Pro Camera or any other 14mm camera. Simply cut it to length for shorter lenses like on the original cam.

Pobrania
243
Polubienia
12
Ocena
5
P
PrintablesGeekMystique

Easy print Moblite / Mobula canopy for Caddx Ant Lite

Strongly inspired by the very effective design of ngn33r: https://www.thingiverse.com/thing:4859251 other cam sizes & angles can be updated in the provided F360 files.

Pobrania
239
Polubienia
27
Ocena
4
P
PrintablesSSX556

M2 Caddx Ant Lite Adapter for Mobula6 & 7 1S canopy

A small adapter clip to screw a Caddx Ant Lite into a Mobula6/7/8 canopy using M2x4 screws and M2x3 heat inserts. M2x3 heat inserts from cnckitchen Be careful while melting the inserts in as the plastic walls are very thin. I added a…

Pobrania
239
Polubienia
25
Ocena
5
P
PrintablesDavid Hanuš

Caddx Nebula lens cover - protector

Flexible material only (Filaflex40)

Pobrania
229
Polubienia
9
Ocena
5
P
Printablessalamantos

ImpulseRC APEX Caddx Ratel 2 camera mount

This is mount for Caddx Ratel 2 onto ImpulseRC APEX frame. It requires only two m2 4-5mm screws to secure camera itself I have printed this in PLA and it fits just right

Pobrania
218
Polubienia
12
Ocena
0
P
Printablesrodsgear

Caddx Ant and Ant Lite Canopy for moblite style tiny whoop

Based on the model posted by MrShutterBug on Thingiverse.

Pobrania
199
Polubienia
27
Ocena
5
P
Printablesmaramao

Caddx Vista enclosure DJI FPV 30x30 mount

enclosure for the Caddx Vista that can be additionally secured with m2 nuts and bolts to the mount, meant to be positioned on top of a 30x30 stack feet/spacers height is 3mm, the holes are intentionally a tight fit to keep it in place…

Pobrania
198
Polubienia
14
Ocena
0
P
PrintablesIsTim

Caddx Walksnail VRX mount bracket replacement/fix

This is a small print with fine details - use the highest quality you can and 100% infill Replacement bracket for the Walksnail VRX mounting bracket which is prone to break at the mounting screw. Rafts: No Supports: No Resolution: High…

Pobrania
191
Polubienia
13
Ocena
0
P
PrintablesJGDenver

Caddx Vista Plane Mount

Remixed for the Caddx Vista. Use m2x16 screws w/ nuts to hold the vista down. I added extra holes for mounting options. Remix from https://www.thingiverse.com/thing:4775067

Pobrania
186
Polubienia
14
Ocena
5
P
Printablessimarzi

TBS Source One XT60 Mount with or without Caddx Vista Antenna holder

Hello, This is an XT60 holder for an TBS Source One Frame with or without the original Caddx Vista Antenna. I designt his because i often got the cable from my XT60 plug into my props. First i used the original Caddx Vista Antennamount…

Pobrania
184
Polubienia
10
Ocena
0
P
PrintablesMr-J

Caddx Vista Digital FPV Pod

This case turns the Caddx Vista DJI Digital FPV Air unit into a self contained FPV pod that can be attached to any RC aircraft or ground vehicle. I use Velcro to attach mine to RC planes.This allows me to convert just about any plane to…

Pobrania
167
Polubienia
17
Ocena
0
P
PrintablesMr V

Heewing T2 Nose for Caddx GM3 Gimbal

When printing the nose i laid it on it's back. Uses a lot of support but it makes for a smoother looking print. I imagine someone can cutoff the cape type thing i have on the nose to make the transition to the fuse a little smoother. Up…

Pobrania
160
Polubienia
9
Ocena
0
P
PrintablesAsalas88

Caddx Vista mount for 21mm spacing IFlight Nazgul5 v2, XL5, with HappyModel EP1 antenna holder

Standoff spacing is 21mm. Standoff height is 28mm if your frame is not the nazgul and you want to match it. This mount was meant to reduce vibrations caused by the antenna, so I printed mine with PETG. It is very stiff and doesn't flex,…

Pobrania
156
Polubienia
10
Ocena
0
P
PrintablesTfourJ 3D

Geprc Mark4 HD Nebula Pro/Caddx micro AU mount

This is a mount for 19mm cameras. Its still not completed NEW UPDATE: Added v2 where camera is moved a little bit forward Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution:…

Pobrania
155
Polubienia
5
Ocena
0
P
Printablesnat3

Caddx Walksnail VTX foldable mount

UPDATE 19/12/23: Dual antenna VTX mount added This model allows a Walksnail VTX to be mounted in a 30.5x30.5 hole spacing while not requiring any screws to mount it. The top folds over the VTX and locks in on itself to secure the vtx in…

Pobrania
155
Polubienia
15
Ocena
0
P
PrintablesSteve-K4YQ

AOS 3.5 Caddx Vista Antenna Mount (new version)

This is a mount for the newer version of the Caddx Vista antenna. You can remove the tube and run the antenna coax through the hole. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 20…

Pobrania
150
Polubienia
4
Ocena
0
P
PrintablesNikosSprocket

CADDX GM3 Gimbal Base Plate & Roll-Cage parts for AOS UL7 Quad

Base Plate & Roll-Cage parts made of ASA for CADDX GM3 Gimbal to be mounted on an AOS frames, model UL7 and probably Cine35 EVO . To check if it will fit other frames before printing everything, just print the “base” piece…

Pobrania
139
Polubienia
18
Ocena
0
P
Printables天 蒲

caddx gofilm 20 mod

caddx gofilm 20 mod

Pobrania
134
Polubienia
7
Ocena
4
P
PrintablesNordfpv

Tinywhoop canopy - Caddx Ant

This canopy is based on the work done by Slavik Nychkalo (https://www.printables.com/model/812479-tinywhoop-canopy-runcam-nano-3/related). I was looking for a new light canopy for a project and I liked his model, but his model was for a…

Pobrania
132
Polubienia
8
Ocena
0
P
PrintablesOscar Jassam

BETAFPV PAVO PICO canopy for caddx Polar Vista

This model is adecue for Caddx Polar Vista

Pobrania
127
Polubienia
10
Ocena
0
P
PrintablesIsTim

Caddx Walksnail VRX - GoPro Mount/Tripod Connector

A small connector that allows the VRX mount to be connected to a GoPro mount Print Settings Printer: Elegoo Neptune 3 Pro Rafts: No Supports: No Resolution: High Infill: 100% Filament: esun PLA Black Category: R/C Vehicles

Pobrania
122
Polubienia
11
Ocena
0
P
Printablesmuchzill4
Pobrania
122
Polubienia
15
Ocena
0
P
PrintablesTim O'Brien

Bomber Caddx Peanut GoPro Mount, ultra TPU protection

The only Caddx Peanut Mount you'll ever need Designed this to be highly protective AND easily removable. A difficult balance but I think I got it down. It protects the lens as much as absolutely possible without getting in the image. It…

Pobrania
120
Polubienia
17
Ocena
0
P
PrintablesYoufu

Caddx Ant Lite Rough 3D model

Rough 3D model of the Caddx Ant Lite for designing frames or testing fitment. Designed in blender and dimensionally accurate.

Pobrania
120
Polubienia
6
Ocena
0
P
PrintablesAnthonyH

Caddx Walksnail Ascent Lite VTX Mounting Pod Small Size

Print in something with higher heat resistance than PLA. I printed in ASA for lightness, heat and UV resistance. Attach VTX to the Body with 4* M3x4 or M3x6 screws. The Cam-Top attaches to the Body with 4* M3 screws. Camera attaches using…

Pobrania
119
Polubienia
7
Ocena
5
P
PrintablesLegoRJ35

Caddx Peanut GoPro mount

A GoPro mount for the Caddx Peanut

Pobrania
116
Polubienia
7
Ocena
5
P
PrintablesDickie_does

Caddx Walksnail Goggles X Module with Foxeer Wildfire

This is a two part body that alllows the use of the Foxeer Wildfire cover by LordKokosnuss https://www.thingiverse.com/thing:5814297 Download file includes the above cover. It does require the base to be superglued to the main body so…

Pobrania
114
Polubienia
7
Ocena
0
P
Printablesjosepilar

Dji Caddx vista soft mount cage

Made this cage a while back to protect the vista fron chopped grass and sticks that might try to get into the vista, didn't have much problem printing, onse side has cuts to allow to pull down and connect a usb cable.

Pobrania
109
Polubienia
4
Ocena
0
P
Printableskoiiiak

Caddx Ant Lite Canopy

Canopy for Caddx Ant Lite with 15° angle.

Pobrania
108
Polubienia
12
Ocena
0
P
PrintablesThe Bengineer

GEPRC Mark5 Gopro Session/Caddx Orca&Walnut mount

Fixed angle TPU mount for Gopro Session, Caddx Orca and Caddx Walnut on GEPRC Mark5 FPV drone frame. To be mounted without the carbon plate. Camera Angle: Choose the file for your preferred angle. Dm me or comment for custom angles, I can…

Pobrania
106
Polubienia
2
Ocena
0
P
PrintablesStratos

T2 Cruza CaddxFPV GM3 nose

A redesigned nose for T2 Cruza to fit the CaddxFPV GM3 gimbal.

Pobrania
105
Polubienia
4
Ocena
5
P
PrintablesmonkPL

GepRC Mark5 D o3 Vista walksnail caddx

Parts for GeprRC Mark5D (o3 version) version for walksnail b1 b2 version for caddx vista b1 b2 GPS size 15x15 (M100 mini Hglrc) UPDATE mark5_walksnail_b1_2_only_ws_v1 - version for walksnail vtx v1 (two antennas) Print Settings Printer…

Pobrania
105
Polubienia
2
Ocena
0
P
PrintablesCadme1ster

Flywoo Explorer LR4 Caddx Nebula Pro Mount

I didn't like the original camera mount on the Flywoo Explorer, therefore I designed a new camera mount. Print in TPU. Will fit Caddx Nebula Pro and probably other 19x19mm cameras.

Pobrania
101
Polubienia
7
Ocena
0
P
PrintablesManu NUMA

GEPRC Mark 4 support antennes CADDX et RX

GEPRC Mark 4 support antennes CADDX et RX en TPU. Antenne CADDX style Cherry. 2 petits trou à la base pour enlever facilement l'antenne. Bon print ;-)

Pobrania
97
Polubienia
10
Ocena
0

sturdier Kayoumini Parts (skids)(Caddx Ant canopy)(motor protectors)(vtx anenna holder)

A little Stylish rework of the canopy for the caddx ant (i actually redesigned it from the ground up, but i made it to be the same shape) with some slots to be colored with nail polish. that is a bonus if you care for color matching your…

Pobrania
95
Polubienia
8
Ocena
0
P
Printablesmuchzill4

Caddx Ant Lite Canopy for Tiny Whoop

Re-drawn https://www.thingiverse.com/thing:4882164, with slightly tighter fit and a steeper camera angle.

Pobrania
91
Polubienia
18
Ocena
0
P
PrintablesEmmabestoff

Caddx Vista Polar Starlight Schutz BetaFPV Pavo Pico

Leichter Schutz für die Starlight, es ist für den TPU Druck gedacht, und gezeichnet

Pobrania
90
Polubienia
8
Ocena
0
P
Printablesmaramao

DJI CADDX VISTA 20x20 spacer base

3mm high spacer with underneath wire "cavity" (2x10mm), yes the file it's flipped upside down for print ease Category: R/C Vehicles

Pobrania
88
Polubienia
7
Ocena
5
P
Printablesahoi

ImmpulseRC Micro Apex Caddx Vista Antenna Holder

Antenna holder for the stock caddx vista unit on the micro apex frame.

Pobrania
88
Polubienia
3
Ocena
0
P
PrintablesYusitron

Protector GOFILM20 CADDX de WALKSNAIL

Como la lente del Dron GOFILM20 está relativamente expuesta, a cualquier golpe frontal.., y los drones, andan a ratos por los suelos, le he hecho un pequeño protector tanto para la lente como para el filtro, hecho en TPU flex. Es para la…

Pobrania
86
Polubienia
6
Ocena
0
P
PrintablesYoufu

Caddx Ant lite mount for AlphaRC rocky 75mm frame

Print in TPU with the side with the camera tab facing down and the wider edge facing up. 25-degree uptilt Caddx ant lite camera mount for the AlphaRC 75mm carbon frame. Should work for other frames with 18mm spaced standoffs.

Pobrania
84
Polubienia
11
Ocena
5
P
PrintablesFilip

Caddx Gofilm 20 Fpv Drone Case

I made this from petg. Perfect fit for caddx drone. No clip for cover only tension of material, can be adjusted by extrusion if needed but on bambu x1c is perfect. You can print only one color and logo should be not visable.

Pobrania
82
Polubienia
6
Ocena
0
P
Printablesprinterfps

TBS Source One V5 caddx vista / ERLS antenna holder

Material: TPU Support: Tree / Organic fits normal 8cm caddx vista antenna and happymodel ep1 antenna

Pobrania
82
Polubienia
6
Ocena
0
P
PrintablesmouseFPV
Pobrania
77
Polubienia
10
Ocena
0
P
PrintablesSwissFreek

Caddx Vista Mount

Good day, all! We all love the quality of our DJI FPV setups, right? But it's expensive to put a Vista or Air Unit in every single plane you own (assuming you can find one in stock). Meanwhile, lots of molded FPV wings, like the…

Pobrania
76
Polubienia
6
Ocena
0
P
PrintablesAndrás Bognár

1S/2S Toothpick CrazyBee frame, Whoop VTX mount and CaddX EOS2 camera mount

I made this frame after creating my 1S frame and decided to experiment more with a more powerful 1S/2S size. After so many iterations finally it is here. The cam and VTX mount should be printed but the main frame should be made of Carbon…

Pobrania
74
Polubienia
15
Ocena
0
P
Printableslachtan86

Caddx Ratel 2 Lens Cap

Hey pilots, this is little design of Lens Cap for FPV drone camera Caddx Ratel 2. Have you ever lost the original camera cover? You can print it many times again. If you would like to support my designs to give me a small tip, click on…

Pobrania
74
Polubienia
4
Ocena
0
P
PrintablesSuperWilli

Caddx GoFilm20 Rugged Box carrying case

Simple carrying case for the GoFilm20, fits perfectly, no rattling. You will need 6x M3x20 screws. Print everything without supports, use TPU or similar flexible material for the seal (you can also just use it without the seal as well).…

Pobrania
72
Polubienia
14
Ocena
5
P
PrintablesBoA

SpeedyBee Mario Fold8 mount for caddx GM2

This is set of elements to replace front ALU part and mount caddx GM2 gimbal. For the mod You need: M2x10 screw 2pcs (or M1.4x6 if do not want to drill out threads to 2mm dia) 4 silicone dampers - dimensions as shown on pictures -…

Pobrania
72
Polubienia
7
Ocena
0
P
PrintablesMOSKAU

Caddx Ratel 2 Crash protection sleeve (TPU)

Mounting holes are exposed so it can still fit into the mounting bracket. Be sure to print with TPU and enable supports (on build plate only) with 0.2mm Z gap. A bit tedious to fit the camera inside, its a tight fit. Don't be scared to…

Pobrania
72
Polubienia
2
Ocena
0
P
PrintablesSartor

Caddx Ratel, Walksnail Avatar 14mm camera lens cover

Can be used with any 14mm RC cameras. Print with soft TPU. I recommend to print two or three at once (even if you need only one piece), because of possible insufficient cooling and fast print time Tested on: Caddx Ratel 2 Caddx Ratel Pro…

Pobrania
71
Polubienia
5
Ocena
5
P
PrintablesAnthonyH

Caddx Walksnail Ascent Lite VTX Mounting Pod

I have a small form factor version as well. Get it here . Print in something with higher heat resistance than PLA. I printed in ASA for lightness, heat and UV resistance. Screw VTX to the Body with 4* M3x4 or M3x6 screws. The Cam-Holder…

Pobrania
70
Polubienia
7
Ocena
0
P
Printablesaudries

Armattan Marmotte/Badger DJI O3 / Caddx Vista antenna mount/ TBS Crossfire / GPS BN-220 BN180

Pulled out the antenna and fold it for better storage. Use 2 zip ties through the hole (1mm) and secure the tbs crossfire antenna

Pobrania
69
Polubienia
6
Ocena
0
P
PrintablesGerdS

Caddx Vista Standalone Unit

Just put a Caddx Vista unit together with a 30x30x6mm fan and a 5V regulator into a special designed housing to be used as a standalone unit for applications without guaranteed cooling and flight controller, e.g. into the hull of my FPV…

Pobrania
68
Polubienia
6
Ocena
0
P
PrintablesIsTim

Caddx Walksnail VRX mount infill Cap

The mount for the Walksnail VRX is prone to breaking, if you don't want to replace it or don't intend to ever use it this print provides an infill so that you're not left with a gap in the top of your VRX If you're looking for the…

Pobrania
68
Polubienia
2
Ocena
5
P
PrintablesDionarap

AR Wing Pro pan mount for Caddx Vista

Pan cameramount that also holds the vista. It fits in the reces of the FPV canopy of the AR wing Pro. also secure the canopy in some way, else you will lose it! its operatred with a normal 9g servo. the Clamp part goes on the inside of…

Pobrania
67
Polubienia
4
Ocena
0
P
Printablespiero menetti

CADDX Avatar VRX bracket

Replace your fan shield with the orginal 4 screws and hold the caddx avatar vrx.

Pobrania
65
Polubienia
6
Ocena
0
P
PrintablesDrift638

Caddx Vista USB Plug protector

null Print Settings Rafts: No Supports: No Infill: 20 Filament: Saintsmart TPU Category: 3D Printing

Pobrania
65
Polubienia
6
Ocena
0
P
PrintablesMcFly

ImpulseRC APEX BN-180 GPS, Caddx Antenne and Immortal t mount backpack

Little backpack for impulse-rc apex for crossfire gps and caddx vista antenna no support needed tpu 100% infill if you like this give me a sub on IG or YT https://www.instagram.com/martymcfly_fpv…

Pobrania
64
Polubienia
3
Ocena
0
P
PrintablesF. Mandel

DJI F450 - Caddx Vista Mount

The antenna mount can be bend upwards with a heatgun or a lighter

Pobrania
64
Polubienia
6
Ocena
0
P
PrintablesMcFly

Caddx Vista Nebula Pro Pod - GoPro Session 5 Style Case

Designed a cases for standalone Caddx Vista Nebula Pro to mount on my rc-car. Same size like GoPro Session 5. Printed in TPU 98A.

Pobrania
63
Polubienia
6
Ocena
0
P
PrintablesHyperflyt

X-Knight Canopy for Naked Vista and Caddx Polar Camera

This canopy was created for use with the X-knight frame, but can also be use with the Twig XL. It allows for the use of a naked DJi vista and caddx polar camera.

Pobrania
62
Polubienia
3
Ocena
0
P
PrintablesBddha

AOS 5 V2 Caddx Antenna Mount

Antenna Mount for the original Caddx Vista Antenna for Chris Rosser's AOS 5 V2 frame

Pobrania
62
Polubienia
2
Ocena
0
P
PrintablesIsaac Alich

FPVCycle Glide Caddx Vista Antenna Holder

A glide friction fit antenna holder for the caddx vista. I recommend heating it with a heat gun at like 170c for around 30 seconds to soften up the plastic so you can shove the antenna in and then it will shrink down onto the antenna when…

Pobrania
61
Polubienia
3
Ocena
0
P
PrintablesEl Flecko

ZOHD Dart 250G FC + VTX Mount - Matek F411 WSE + Caddx Vista

I use a Matek F411 WSE and a Caddx Vista, and fly a 4s 850mAH battery in my ZOHD Dart 250g. I try some variants to put all together and get the CG in the right position, but nothing satisfied me. So i build a Mount for the FC and the…

Pobrania
60
Polubienia
6
Ocena
0
P
PrintablesAnthonyH

Caddx Walksnail Ascent Lite+ VTX Swappable Mounting Pod

Print in something with higher heat resistance than PLA. I printed in ASA for lightness, heat and UV resistance. Attach VTX to the Body Lite+ with 2 of the short screws included in the kit. The Cam-Top attaches to the Body with 4* M3…

Pobrania
57
Polubienia
3
Ocena
0
P
PrintablesM600

T-Motor Tron 80 Caddx Vista lollipop Antenna Mount

Mounting frame for the Caddx Vista antenna lollipop style. The antenna come with the drone but there's no mounting option for it. You will need two self taping screw or an M2 screw/nut. Total additional weight is 1gr.

Pobrania
55
Polubienia
1
Ocena
0
P
Printablesdarken

Caddx Vista Single Standoff Antenna Mount

For 4mm standoffs. Works well for my FlexRC Skyhopper. Category: R/C Vehicles

Pobrania
54
Polubienia
2
Ocena
0
P
PrintablesRoiS

ZOHD Drift - CADDX Ant Nano Mount

CADDX Ant Nano Mount Camera mount for ZOHD Drift

Pobrania
53
Polubienia
4
Ocena
0

Tinywhoop Canopy for Caddx Ant Lite (variable angle)(flywoo 2s)

a canopy canopy for the Ant Lite designed to hold the cam at different angles (15°-45°). Multiple versions

Pobrania
53
Polubienia
6
Ocena
0
P
PrintablesJack Lenders

QAV-S Caddx Vista Antenna Holder

VTX antenna holder for original Caddx Vista antenna for Lumenier QAV-S. Print in ABS or PETG Also look at my other QAV-S models: QAV-S Skids https://www.thingiverse.com/thing:6121858 QAV-S Stack Protectors…

Pobrania
53
Polubienia
0
Ocena
0
P
PrintablesJurgiz

CADDX Ant cover

Some space were left so that the lense would not touch the cover directly. Enjoy!

Pobrania
53
Polubienia
4
Ocena
0
P
PrintablesMrWhite

naked Caddx Vista - Spacer

Spacer for naked Caddx Vista Print with support.

Pobrania
52
Polubienia
5
Ocena
0
P
PrintablesEl Flecko

Diatone Ripper / HEE Wing F-01 Caddx Vista Drop-In with Camera Mount

Mount for the Caddx Vista or Runcam Link in the front of a Diatone Ripper / HEE Wing F-01. Single Mount for the Vista an the Camera. It's designed as a Drop in, so you can switch it to different Models. Fit's in my ZOHD Dart 250g to. Two…

Pobrania
50
Polubienia
5
Ocena
0
P
Printablesshaks

CADDXFPV Ant lite STEP

CADDXFPV Ant lite

Pobrania
49
Polubienia
6
Ocena
0
P
PrintablesIsaac Alich

Improved Caddx Vista + Nebula Pro Pod

An improved version of the red pod and made for the nebula pro instead of full dji camera. Uses long metal m2x16mm screws to screw the vista down. Cuts in pics not needed for USB-C port, this has been fixed in uploaded versions. M3 Screws…

Pobrania
49
Polubienia
4
Ocena
0
P
PrintablesMachisCZ

AlfaRC Fi-115 caddx vista antenna mount

This mount will help you secure antenna from caddx vista to AlfaRC Fi-115 frame. Print with tpu for best results.

Pobrania
47
Polubienia
2
Ocena
0
P
PrintablesJantar

Lumenier QAV-S Caddx Vista Antenna Mount QAV S

Small lightweight Caddx Vista antenna mount for the lumenier QAV-S 5'' quad. Printed in TPU with a 0.2mm layer height, 20% infill, no supports needed. Antenna is mounted with two M2 x 8 screws and two lock nuts. Print Settings Rafts: No…

Pobrania
47
Polubienia
1
Ocena
0
P
PrintablesFagge

DJI Caddx Vista on a FMS ASW-17 aircraft

Print in TPU or PETG for the mid part that is in contact with the hot Vista unit. Print the mid section upside down with the curved surface facing up. Support is required, but that is easily broken off. Print with 0.1mm layer height, for…

Pobrania
46
Polubienia
3
Ocena
0
P
PrintablesCraftyCodes

Caddx polar camera protector

Must be printed with TPU or other soft material.

Pobrania
45
Polubienia
3
Ocena
0
P
PrintablesBananas on Mars

FPV camera lens caps, 9, 10, 14mm, Caddx Ratel 2, Baby, Ant

Printed in TPU, Lenscaps that protect the lens during transport but don't touch the lens itself. Printed in TPU 95 Shore. If to tight or to loose for your lens, just scale the model a few percent in your slicer.

Pobrania
43
Polubienia
2
Ocena
0
P
PrintablesNotamed Closed

Heewing T-1 Ranger Camera Mount - Insta360 Go2 / Caddx Peanut

Glue on with a strong glue like E6000 in place of the stock front and rear vents. You'll need an M4 bolt and nut for the mount. The Insta360 Go 2 mount is pretty tight. May be worth slightly upscaling it. Peanut mount is pretty good…but…

Pobrania
43
Polubienia
4
Ocena
0
P
PrintablesDr.Print

FPVCycle Glide BN-880 GPS and Caddx Antenna Mount

GPS and antenna mount for the FPVCycle Glide frame for the Caddx stock antenna and BN-880 GPS unit

Pobrania
42
Polubienia
5
Ocena
0
P
Printablesbposu2008

DJI Caddx micro camera vtx antenna holder

Print to hold the Caddx Vista VTX (20x20 holes), micro camera, and antenna. I printed mine with TPU and no supports. I use M2 screws to attach the VTX and heat shrink to hold the antenna. Just add velcro to the bottom and the desired…

Pobrania
42
Polubienia
5
Ocena
0
P
PrintablesM. Tops

iFlight RC iH3 DJI Caddx Vista Long Range GPS, TBS Immortal T & Caps

DJI Caddx Vista, TBS Immortal T, GPS (BN-180) and CAPS (10mm) holder for iFlight iH3.

Pobrania
42
Polubienia
3
Ocena
0
P
PrintablesMilesy

Nano Skyhunter HD Pod for caddx vista

A FPV pod for the caddx vista air unit to mount on to the Skyhunter racing/nano canopy. Print Settings Printer: P3 steel Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: Filamentive Petg White Category: R/C Vehicles

Pobrania
41
Polubienia
3
Ocena
0
P
PrintablesLeoMGames

CaddxFPV GM3 V2

3D Scan and Model of the CaddxFPV Gimbal GM3 V2 since they only provide one for V1 https://de.caddxfpv.com/products/caddxfpv-gimbal-gm3-v2

Pobrania
41
Polubienia
2
Ocena
0
P
PrintablesEl Flecko

ZOHD Dart 250G Antenna Support - Caddx Vista

This Design is inspired from Painless360s Antenna Mount, Name "ZOHD Dart 250G Antenna Support", ID 4726331. As Painless 4mm Antenna Mount don't allow remixes, it's completely self designed for a Caddx Vista Antenna with 3mm Dia. Category:…

Pobrania
41
Polubienia
0
Ocena
0
P
PrintablesWizardOfWas

Flywoo Explorer LR feet protector and caddx peanut cam with charger holder

Flywoo Explorer LR. I liked the protector with feet. However, printing them was difficult, so I made a flat spot so they can be (more) easily printed. My TPU settings aren't great, but include the .3mf so at least you don't have to mirror…

Pobrania
40
Polubienia
2
Ocena
0
P
Printableshariedo

Field Case for Caddx Peanut Camera Kit

This is yet another organizing case for all the fiddly accessories which come with a Caddx Peanut (the lightweight drone-ready version of the Insta360 Go 2). It's a lot more compact than the original box and keeps things safe together in…

Pobrania
37
Polubienia
6
Ocena
5
P
PrintablesHussain

DarwinFPV Baby Ape Caddx Peanut Mount

This is a modified CaddxFPV Peanut Camera mount to fit DarwinFPV Baby Ape Pro V2. Printed in TPU 0.15mm Quality. No Supports Needed.

Pobrania
37
Polubienia
3
Ocena
0
P
PrintablesJack Lenders

QAV-S Caddx Vista Antenna Holder

VTX antenna holder for original Caddx Vista antenna for Lumenier QAV-S. Print in ABS or PETG

Pobrania
36
Polubienia
0
Ocena
0
P
PrintablesOren Hazi

Hornet origami canopy for Caddx Ant Lite

Designed to fit Caddx Ant Lite analog camera and Maple Wireless “Lite 1s” antenna. Camera and antenna mounting areas have grooves for zip ties. Prints flat without supports. Tested with Sainsmart 95A TPU. Camera should sit somewhere…

Pobrania
35
Polubienia
6
Ocena
0