Wyniki wyszukiwania: candleh

Sortowanie

69 modeli

Heart shaped tealight candleholder

I got the best print result with a perimeters of 1, since PrusaSlicer adds the solid infill to print the inclined walls. I also used a layer fin layer height of 0.15 mm with a 0.6 mm nozzle. No support needed. The candleholder is safe to…

Pobrania
562
Polubienia
147
Ocena
4,8

Greek pillar candleholder

Print with fuzzy skin with 0.1 thickness and 0.15 to 0.3 point distance to get a nice rough surface look.

Pobrania
390
Polubienia
112
Ocena
5
P
Printablesfluffyb

Silicon/concrete mold for candleholders and other stuff

Made from bottom up but the principal is not new. I've put some descriptions on the files and underneath. I've attached a candle-holder with room for a wick-holder ready to print that fits the model. It's possible to emboss it if you…

Pobrania
151
Polubienia
31
Ocena
0

Penta to circle candleholder

Print with lightning infill to save material Made for 21 mm diameter candles.

Pobrania
108
Polubienia
25
Ocena
0
P
PrintablesRedneck

Kerzenhalter Kuchen / Candleholer cake

Einfacher Kerzenhalter für den Kuchen. Geeignet für 12mm Kerzen. Fusion Datei wie immer dabei, feel free to remix

Pobrania
106
Polubienia
13
Ocena
5
P
PrintablesFallenAngel

Candleholder 19

Candle holder series

Pobrania
82
Polubienia
23
Ocena
5

Unity candleholder

Made for 21 mm diameter candles If you print with a very fine layer height, you can print it without support. Check my print file for more information.

Pobrania
79
Polubienia
13
Ocena
5
P
PrintablesFallenAngel

CandleHolder 16

Candle holder series

Pobrania
77
Polubienia
14
Ocena
0

Tall 3-Inch Pillar Candleholder for Electric Candles

3-Inch Pillar Candleholder A minimalist taller candleholder designed to hold a 3-inch (76mm) electric pillar candle. Featuring simple curves, this sleek, single-piece design is easy to print and blends seamlessly into any decor style.…

Pobrania
74
Polubienia
17
Ocena
5
P
Printables3DPO

Lightsaber Candleholder

This model comes in 4 pieces, the top portion of the saber, bottom, base(lukes house) and the doorway with silhouette of Luke. If printing in multicolor I recommend printing the top and bottom of the saber separately as it saves on…

Pobrania
73
Polubienia
26
Ocena
0
P
PrintablesFallenAngel

CandleHolder 11

Candle holder series I would recommend using electric candles for these holders, but you are free to use normal candles. However, please check the data sheet for melting point of your materials. You can also add small metal sheet on the…

Pobrania
69
Polubienia
15
Ocena
5

Festive Christmas tree candleholder

Print with lightning infill to save material and use support on all of them expect the bottom one.

Pobrania
61
Polubienia
21
Ocena
0
P
PrintablesMagda j

Candleholder 2

A decorative candle holder for stick candles with 20-23 mm diameter base. It also fits candles witch are tapered at the end. Candles schuld not be left unattended due to the fire hazard! PLA will burn! Follow me on printables and I will…

Pobrania
61
Polubienia
4
Ocena
0
P
PrintablesFallenAngel

CandleHolder 12

Candle holder series I would recommend using electric candles for these holders, but you are free to use normal candles. However, please check the data sheet for melting point of your materials. You can also add small metal sheet on the…

Pobrania
61
Polubienia
17
Ocena
5
P
PrintablesFallenAngel

CandleHolder 15

Candle holder series

Pobrania
60
Polubienia
14
Ocena
4

Candleholder V25

Small flower like tealight holder

Pobrania
57
Polubienia
13
Ocena
0
P
Printablesneobobkrause

Elegantly Simple Goblet Candleholder

Add a touch of simple elegance to your table, nightstand, or bathroom with this goblet candleholder. Its shape demonstrates the essential principle followed in both art and engineering that simplicity is elegance . Printed using…

Pobrania
53
Polubienia
2
Ocena
5
P
PrintablesFallenAngel

CandleHolder 9

I would recommend using electric candles for these holders, but you are free to use normal candles. However, please check the data sheet for melting point of your materials. You can also add small metal sheet on the surface and place…

Pobrania
53
Polubienia
16
Ocena
5
P
PrintablesFallenAngel

Candleholder 20

Candle holder series

Pobrania
53
Polubienia
14
Ocena
0
P
PrintablesChristiansen

MODERN CANDLEHOLDER FOR CHRISTMAS OR WEDDING

Deutsch: Dieser klassische Kerzenhalter im modernen Design vereint Tradition mit zeitgemäßer Ästhetik. Die spiralförmige Textur verleiht ihm eine elegante Dynamik, die in jedem Raum für ein stilvolles Ambiente sorgt. Hergestellt aus…

Pobrania
52
Polubienia
11
Ocena
0

Keri candleholder

I added a color change at 60 and 100 mm. The model is made for candles with a diameter of 21 mm

Pobrania
47
Polubienia
2
Ocena
0

3 in 1 candleholder

Rotate the model so it is facing down. Print time is between 2 to 4 hours depending on layer height. No need for support in the hole if you use a low enough layer height. I printed them all without on 0.20mm layer height. Made for 21 mm…

Pobrania
47
Polubienia
14
Ocena
0
P
PrintablesFallenAngel

Candleholder 18

Candle holder series

Pobrania
47
Polubienia
12
Ocena
0

Short 3-Inch Pillar Candleholder for Electric Candles

3-Inch Pillar Candleholder A minimalist candleholder designed to hold a 3-inch (76mm) electric pillar candle. Featuring simple curves, this sleek, single-piece design is easy to print and blends seamlessly into any decor style. Complete…

Pobrania
46
Polubienia
11
Ocena
0
P
PrintablesFallenAngel

Candleholder 17

Candle holder seriesde

Pobrania
45
Polubienia
10
Ocena
0

Stripes tealight candleholder

Can be printed with no support. Print at 195C to avoid stringing. Rotate the model so the base is vertical. Made for tealights with a diameter of 39.5mm

Pobrania
39
Polubienia
11
Ocena
0

Triangle square pattern candleholder

Can be printed with the lightning infill to save material

Pobrania
37
Polubienia
6
Ocena
0

Easter egg silhouette candleholder

Make sure you have a good first layer. Easy to make with different colors. To assemble it just insert the inner part into the outer and squeeze the outer a little bit to make it flex so the inner can slide into the joints.

Pobrania
37
Polubienia
13
Ocena
0
P
Printablesjonteohr

Electronic Candleholder

Basic candleholder in hexagonal pattern design. Works for basic electronic candles. Sizes: Diameter inside: 77mm Height: 114mm Printed in PLA and gives a nice little “shine-through” effect with my electronic candles.

Pobrania
35
Polubienia
8
Ocena
0
P
PrintablesFallenAngel

Candleholder 22

Candle holder series

Pobrania
35
Polubienia
5
Ocena
0

Medium 3-Inch Pillar Candleholder for Electric Candles

3-Inch Pillar Candleholder A minimalist candleholder designed to hold a 3-inch (76mm) electric pillar candle. Featuring simple curves, this sleek, single-piece design is easy to print and blends seamlessly into any decor style. Complete…

Pobrania
34
Polubienia
13
Ocena
0
P
PrintablesFallenAngel

CandleHolder 14

Candle holder series

Pobrania
34
Polubienia
8
Ocena
0
P

Twisty Vase Mode Candleholder

Description Print Settings Printer Brand: Prusa Printer: Prusa Mini+ Rafts: No Supports: No Resolution: 0.2 Infill: 0% printed in Vase Mode Notes: Esun Pla+

Pobrania
33
Polubienia
14
Ocena
0
P
PrintablesAitasWorkshop

Minimalist Candleholder

Was cleaning out my cupboards the other day and found a pack of candles that I have in case of a blackout. This led me to think of safer ways to hold it instead of risking burning my hands with wax. For some reason this led to me thinking…

Pobrania
33
Polubienia
1
Ocena
0
P
PrintablesHayvosh

Wall hung candleholder

Was unable to find a good wall hung candle holder for larger led candles, that was similar to one that I've bought years ago. So I made one that looks somewhat similar, this is also my first published design, so bare with me :-) It has a…

Pobrania
33
Polubienia
4
Ocena
0
P
PrintablesFallenAngel

Candleholder 21

Candle holder series

Pobrania
32
Polubienia
10
Ocena
0

Parvum tealight candleholder

Made for 40 mm diameter tealight candles.

Pobrania
31
Polubienia
7
Ocena
0
P
PrintablesFallenAngel

CandleHolder 13

Candle holder series I would recommend using electric candles for these holders, but you are free to use normal candles. However, please check the data sheet for melting point of your materials. You can also add small metal sheet on the…

Pobrania
31
Polubienia
8
Ocena
0
P
PrintablesFallenAngel

CandleHolder 10

I would recommend using electric candles for these holders, but you are free to use normal candles. However, please check the data sheet for melting point of your materials. You can also add small metal sheet on the surface and place…

Pobrania
29
Polubienia
6
Ocena
5
P
PrintablesFallenAngel

Candleholder 23

Candle holder series

Pobrania
28
Polubienia
7
Ocena
0
P
Printablesmdj

Candleholder

We got a candle of unusual diameter (42 mm), so I went ahead and made a holder for it. It was fun to use four of the XL extruders: Noulei gold satin filament Prusament PETG V0 for the fire safe cup in the middle Natural PLA for support…

Pobrania
26
Polubienia
3
Ocena
0
P
PrintablesMrHegger

Candleholder

Candleholder with a spike to attach Candles onto your Advent wreath. Comes in two sizes, 25 and 20 mm Diameter. Print upsite down with no supports.

Pobrania
23
Polubienia
7
Ocena
0

Caduceus candleholder

Made for candles with a diameter with 21 mm The two pots on the picture can be found here: https://www.printables.com/model/1183648-pot-21 and https://www.printables.com/model/1017732-pot-18

Pobrania
22
Polubienia
1
Ocena
0
P
PrintablesFallenAngel

Candleholder 24

Candle holder series

Pobrania
22
Polubienia
4
Ocena
0

Selekoh candleholder

The part print easily on its side. Made for 21 mm diameter candles

Pobrania
20
Polubienia
6
Ocena
0
P
PrintablesCarperone

Vertical Skulls Candleholder

Design Concept The Vertical Skulls Candleholder features a unique and edgy design featuring stacked skulls, perfect for adding a gothic or Halloween-inspired aesthetic to any room. Use This candleholder is designed to securely hold…

Pobrania
20
Polubienia
4
Ocena
0
P
Printablesneobobkrause

Festive Votive Candleholder

As winter approaches I'm reminded of this votive candleholder created last year by one of my students, Lauren. Its pure design perfectly leverages the opportunities afforded by transparent filament and dual extrusion printing -- though it…

Pobrania
18
Polubienia
0
Ocena
0
P
PrintablesSchollinger

Kerzenhalter Kommunionkerze / Candleholder Communion candle holder

Kerzenhalter Kommunionkerze / Candleholder Communion candle holder 7cm Kerzendurchmesser Gedruckt mit 0.12mm Infill: Grid ohne Support

Pobrania
16
Polubienia
0
Ocena
0

Aevn candleholder

Made for 21 mm diameter candles. Be aware it can seem a bit unstable, but if you just leave it alone it stand alright.

Pobrania
15
Polubienia
4
Ocena
0
P
PrintablesDan

Minimalist Candleholder

I created it for candles with a diameter of 22mm or 0.87 inches. The fit should be tight, since I didn't want the candle to fall out. If its too tight, consider scaling the model up by a few %. I would recommend a high infill, since its a…

Pobrania
15
Polubienia
4
Ocena
0

Customizable infill pattern tealight candleholder

You need to print the following amount of parts: 4 under 4 top 6 (3+3) full, I.e. 3 in each color. This model is almost a first layer test. Depending on your infill type. I printed mine with the following settings: No bottom or top layer!…

Pobrania
15
Polubienia
4
Ocena
0

Paramietry candleholder

Print the "part" two times with no bottom and no top and a selected infill of your choice. Made for 21 mm diameter candlesticks.

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesDr. Stefan Lux

Candleholder for Halloween Lantern

This design adds a simple fixture for up to three candles or tealights to the very beauty halloween latern mentioned above

Pobrania
14
Polubienia
3
Ocena
0
P
PrintablesM. Churavý

Translucent candleholder (Průsvitný svícen)

Transculent candle holder for tea candle or small eletric candle. Good for painting with marker. (Průsvitný svícen na čajovou nebo elektrickou svíčku. Vhodný na pomalování fixou.)

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesBit

Star shaped Candleholder

This is Star shaped candleholder I made for my daughter based on she's design, it is better to use aluminum insert if use with ordinary candles.

Pobrania
12
Polubienia
0
Ocena
0
P
PrintablesCilace

Decorative Candleholder

A candleholder, bottom screws out but you can also leave it off, good for tealights. Inspired by another candleholder on here, the bottom part is not required but its a simple screw on, so if you want to glue the top parts together you…

Pobrania
11
Polubienia
6
Ocena
0
P
PrintablesCarperone

Candleholder with heart

A decorative 2 pieces candleholder with a heart. Each one of the pieces has one half of the heart so to get the heart shaped ornament you must print the 2 of them. Nozzle size 0.4mm, Layer Height 0.2mm, Print speed 300ms, Minimum Infill…

Pobrania
10
Polubienia
4
Ocena
0
P
PrintablesDebris Design

Triforce electric candleholder

Holder for electric candle lights based on the triforce. 41mm hole for the light

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesClemens Mart

Candleholder

Candle holder for typical household candles (approx. 2.2mm)

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesBrumik

A Halloween candleholder with a ghost stirring soup in a pot

A Halloween candleholder with a ghost stirring soup in a pot

Pobrania
4
Polubienia
0
Ocena
0
P
Printableslonestar

Geometrical Candleholder

This geometrical candleholder has an abstract design made up from three parts, which are recommended to be printed in different colors. The bottom section is a bent-outward cylinder with twisted ribs, the middle section a quadratic…

Pobrania
2
Polubienia
2
Ocena
0
P
PrintablesLoolo100

Sprial-LED Candleholder

Made to fit a regular sized tealight led candle, or other similar models It is NOT recommend to use a real candle as it may make the shade plastic soft, if you do decide to print it in PLA, this model was not tested with other materials…

Pobrania
1
Polubienia
2
Ocena
0
P
Printables

Parvum tealight candleholder

Made for 40 mm diameter tealight candles.

P
Printables

Minimalist Candleholder

I created it for candles with a diameter of 22mm or 0.87 inches. The fit should be tight, since I didn't want the candle to fall out. If its too tight, consider scaling the model up by a few %. I would recommend a high infill, since its a…

P
Printables

Kerzenhalter Kommunionkerze / Candleholder Communion candle holder

Kerzenhalter Kommunionkerze / Candleholder Communion candle holder 7cm Kerzendurchmesser Gedruckt mit 0.12mm Infill: Grid ohne Support

P
Printables

Geometrical Candleholder

This geometrical candleholder has an abstract design made up from three parts, which are recommended to be printed in different colors. The bottom section is a bent-outward cylinder with twisted ribs, the middle section a quadratic…

P
Printables

CandleHolder 11

Candle holder series I would recommend using electric candles for these holders, but you are free to use normal candles. However, please check the data sheet for melting point of your materials. You can also add small metal sheet on the…

P
Printables

CandleHolder 12

Candle holder series I would recommend using electric candles for these holders, but you are free to use normal candles. However, please check the data sheet for melting point of your materials. You can also add small metal sheet on the…

P
Printables

CandleHolder 13

Candle holder series I would recommend using electric candles for these holders, but you are free to use normal candles. However, please check the data sheet for melting point of your materials. You can also add small metal sheet on the…