48 535 modeli
New version of the wallet available here Update 04/08/2022 : I changed the tolerances, it should now be less tight for the cards. I also made a little change to prevent the last card from going behind the mechanism. These updates are only…
Wydruk około 2,68 €–3,28 € nettoWstępna wycena jednego wariantu
Original model was good, except for the hinge, it's a perfect candidate for printing in place. That's my first print in place model, so any hints, makes, comments are very appreciated! Print settings PLA 0.2 height 3 perimeters 30% infill…
Wydruk około 0,73 €–0,90 € nettoWstępna wycena jednego wariantu
This is my design for a case for holding Gridfinity bins. My design goals included: Clean design No Hardware Able to stand on ends and back Contents stay in place Easy to open and securely close Stackable Designed for 3D printing While I…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Case for glasses that uses 3D flexible structure. This model is printed flat and then folded into its final shape. Introducing video: Printing: There are small user support blocks under the side wall radiuses and it is intended to be…
Wydruk około 3,64 €–4,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place…
Wydruk około 0,45 €–0,54 € nettoWstępna wycena jednego wariantu
Slim Arduino Uno Case Overview: -This sleek, two-part case is specifically designed to house and protect an Arduino Uno. It's compact and streamlined, ensuring your Arduino remains secure and accessible. Assembly Instructions: - Required…
Wydruk około 1,81 €–2,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I DM for a group of players new to TTRPGs and saw that they tend to need help finding the right die to roll or end up using the wrong ones for their actions. My goal for this case was to reinforce the differences between the dice and to…
Wydruk około 5,45 €–6,66 € nettoWstępna wycena jednego wariantu
PHILIPS OneBlade - Compact travel case 🔑 Key Features: Easy to Use - No Assembly, No Supports, just print and use. New and Original Locking system – Custom designed locking mechanism keeps the case secure, in addition the printed…
Wydruk około 9,12 €–11,15 € nettoWstępna wycena jednego wariantu
The set includes chess pieces and a playing field. For maximum compactness, all parts are placed one inside another. This is similar to the principle of nesting dolls or stacked chairs. I did similar projects before, but here for the…
Wydruk około 3,46 €–4,22 € nettoWstępna wycena jednego wariantu
UPDATE 12 November 2023: I've received a consistent handful of messages from people who have been downloading the wrong original files so I've reuploaded the correct lid/seal files here as well. UPDATE 13 July 2023: Added a version with…
Wydruk około 4,48 €–5,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Overview A fully printable, fully functional printable harmonica in a simple 3-piece form factor that clips together - no fasteners needed! The design features swappable reed plates which set the playable notes. The attached reed plate…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
A small holding case of the standard tools provided with most entry level printers (EG: Creality Ender series). Good for on-the-go storage for quick simple maintenance on most 3D printers. Side 1 holds: Clippers Screw driver 4x spare…
Wydruk około 7,14 €–8,73 € nettoWstępna wycena jednego wariantu
Here is my design of a happy cloud lamp - the cute little light for your toddler! The lamp will cast a shadow of the stars to the ceiling (see pictures). You won't need anything but an LED strip as additional hardware for this lamp, also…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
A Minimalist IPhone case with hexagonal Design on the back and a nice snug fit. Works fine with Both PLA and PETG.
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4 *** New case for Raspberry Pi Touch Display 2 *** Updates Alternative top case part with additional slot for camera ribbon cable, see subfolder "case top v2". Features Internal fan…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After seeing many other container projects, and old products like the Dutch Roly Kit, I thought I'd try my hand at designing my own. I spent weeks worth of manhours working on prototypes and iterations, so please, if you really like it,…
Wydruk około 2,66 €–3,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
2 part sleeve case for the Raspberry Pi 3, their spilt in the middle of the headphone jack. The 2 parts of the case slides over Raspberry Pi, and held together by friction between the 2 part of the case and the Raspberry Pi. So no need of…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Für meinen Virtuellen Flipper (VPin) habe ich eine einfache und kompakte PC ATX Halterung gebraucht. Es sind vier Druckteile notwendig. Das linke und mittlere hat eine Aufnahme, um das Netzteil darunter festzuhalten. In dem Beispiel ist…
Wydruk około 5,59 €–6,84 € nettoWstępna wycena jednego wariantu
Galaxy Buds Case that snaps on. No glue or tape. It will fit Buds Pro, Buds Live, Buds2 and Buds2 pro, and Buds FE. I printed in PLA. 0.15mm QUALITY settings in Prusaslicer. Ironing for top layer only. Supports so it can be printed easily…
Wydruk około 0,90 €–1,09 € nettoWstępna wycena jednego wariantu
Why YZ Case ? I wanted to create a Bear Upgrade, at no cost... once the Power Supply was removed, (Keeping it out of the heated enclosure) I needed a bracket to tie together the missing structure that the Power Supply provided. The YZ…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
This case fits the Teyleten Robot ESP32-S3 Development Kit sold by Amazon… https://www.amazon.com/dp/B0B6HT7V7P?psc=1&ref=ppx_yo2ov_dt_b_product_details This development kit has two USB-C connectors without the pins soldered to the board.…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a modification to the Original Prusa I3 MK3/MK3S Einsy case that implements appropriate housing for a Raspberry Pi 1B+/2B/3B/3B+/(4B - Now available as the first download ). This part allows for one of the aforementioned Raspberry…
Wydruk około 5,59 €–6,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The story: Wanted to print small case for condoms which could be thrown in a bag and forgotten about without worry that the condoms will get damaged, because you know you should not keep condoms in a wallet. I could not find a single…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena jednego wariantu
I made a remix to fit my ESP-WROOM-32D because the ESP won't fit with the original case. I also changed the fittings a little bit so that it can be easy reopened.
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
YubiKey 5C NFC Case/Keychain (USB C only) I needed something to protect my YubiKey from random bumps and scratches in my pocket. Printing in different colors to differentiate them. It is intended to use case cap as main holder of the key…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was looking for an Raspberry Case that could fit the Pi and a Stepdown (Buck) Converter to power the Pi directly from the power supply of my MK3S. I couldn't find anything I like so I decided to create my own. I designed 2 versions of…
Wydruk około 4,59 €–5,61 € nettoWstępna wycena jednego wariantu
Designed for Octoprint If you are looking for a nice Octoprint case, this is right for you. Also, RaspiCam is supported! Updates 01-16-21: New version available! All suggestions have been accepted and implemented in the new version.…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple earplugs case for travelling or just for storage. It prints in place without the need for supports or other mechanical operations after printing. It might close and open a bit harder at the beginning, but after a few…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
A friend wanted his own case for the new Samsung Galaxy A33, so I was happy to model and print it for him. After two iterations it was done. He wanted this "beam" ornament. But you can create your own . In the files you will also find the…
Wydruk około 1,43 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you like my design, I really appreciate if you can consider a coffee ☕ for me! ( LINK ) Version 2 released! Snaps on sides, slightly easier to open. Overview A business card stand for an exhibition booth or an event table. It folds and…
Wydruk około 2,56 €–3,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Important: Please check the pictures how to change the print settings for a successful print :) There will be an imprint on the first layer, for that you have to place the surface on the bottom and set an outer rim of 15mm. With those…
Wydruk około 5,71 €–6,98 € nettoWstępna wycena jednego wariantu
This is a press-fit Pi 5 case, with customisable options for vents and ports, that also supports the optional active cooler. V1.1 has more tolerant clearances, less crush ribs and a slight taper to the longer pins. V1.2 has no specific…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
Apple Watch Charger Case With Cord Winder. This is a Print in Place cord winding case for Apple Watch chargers. Two separate models to work with variations in Apple Watch Chargers. I have also added the gcode and 3mf files for the color…
Wydruk około 2,37 €–2,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE - 3-15-2023 This case is meant to be a little loose in order to protect your expensive in-ear monitors or earbuds from getting tossed around or wound tightly which can add wear and tear and strain cables over time. BUT i always…
Wydruk około 4,39 €–5,37 € nettoWstępna wycena jednego wariantu
A modification of my original model. This one is enlarged to 80 mm height to the size of a banknote. If your Christmas presents also include money you can hide it here and hang it on the tree. Of course you don't have to print the bottom…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
These wheel chocks will stop your Hot Wheels / Matchbox 1:64 cars from rolling around on unlevel surfaces. They work on the front wheels, back wheels or both. Very quick print! HW Chocks-ChockA is easier to print and comes off the build…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
So this is a thin and minimal protection case for Apple Watch Series 7 45mm. Prints in 14m and uses only 1,4g of material.
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . NOTE: Could try printing the case with ZERO top and bottom layers, perimeters: 8-10, honeycomb infill at 5-15%. Supports everywhere, style: grid, top Z distance: 0.25mm(for 0.2mm layer), top…
Wydruk około 2,64 €–3,23 € nettoWstępna wycena jednego wariantu
Create your own customized electric guitar effortlessly with this modular design. Inspired by the original Prusacaster and using the Harley Benton Electric Guitar Kit T-Style from Thomann too, you can easily swap parts to change the…
Wydruk około 2,53 €–3,09 € nettoWstępna wycena jednego wariantu
Let your kids explore the world of construction with this fun and realistic Sand Mason Toy Set ! This 3-piece set is perfect for building detailed sand structures at the beach or in the sandbox. It includes: 🧱 Brick Mold – a block-shaped…
Wydruk około 2,05 €–2,51 € nettoWstępna wycena jednego wariantu
Airpods Pro Case with the Google dinosaur
Wydruk około 9,53 €–11,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple bracket holding the case for a Raspberry Pi 3 B+ and SenseHat boards.... serving Octoprint etc. 2 M3 cap screws required. Print instructions ABS no supports.
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
This card tower is designed to hold both the Karak and Karak Regent expansion cards. For Carcassonne, it has been tested with the Basic game and the Inns and Cathedrals expansion. For optimal use with Karak, I recommend pairing it with…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
My friend bought a Raspberry Pi 7 inch Capacitive Touch Screen HDMI Monitor. He wanted a case and stand for it. I found a case for a similar monitor and remixed/remodeled it to fit. I made a lot of improvements to the case for printing…
Wydruk około 1,97 €–2,40 € nettoWstępna wycena jednego wariantu
This is a Hot Wheels / Matchbox 1:43 scale model of a 4-post car lift for displaying different size diecast cars. These snap together so you don't have to worry about extra hardware or glue. I've added added a wheel chock near the front…
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
I made this quick and easy USB Case to use and remix it into way more interresting Cases. I used this USB Sticks from Amazon because it is a widespread model and easy to take apart. I look forward to see your remixes and will add some…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Updated the hole size and made the back feet more firm. Also named all components in the .3mf file to make things easier. This is the kind of toy I would fidget with when I was a kid. A little Transformers Micro-cassette. While it does…
Wydruk około 5,36 €–6,55 € nettoWstępna wycena jednego wariantu
A half-shell case for the Galaxy Tab S6 Lite. Covers the back, sides, and corners. Also provides a bezel to protect screen when device is face-down on a surface. Hard shell design: Fills-up the MK3S build space (1-2mm to spare) Prints…
Wydruk około 3,88 €–4,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A retro case that's simple and functional. Designed for use with pi's active cooler. I was aiming for a retro, Art Deco vibe, and also tried to capture the classic look of an RTX or Radeon reference GPU. Print Instructions: Settings: ~38g…
Wydruk około 3,27 €–4,00 € nettoWstępna wycena jednego wariantu
Mouth Guard Print In Place. For those who want a new case with a hinge to hold your mouth guards. I made this in PLA.
Wydruk około 2,19 €–2,67 € nettoWstępna wycena jednego wariantu
A nice case for your 7" Raspberry Pi Touch Display 2 (https://www.raspberrypi.com/products/touch-display-2/ ) and a Raspberry Pi. Features easy access to the USB and Ethernet ports. Designed to use the M2.5 x 6mm screws included with the…
Wydruk około 5,70 €–6,97 € nettoWstępna wycena jednego wariantu
a minimal case for a HC-SR04 sensor, fits without screwing.
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
A Fun and easy to print hard case remote for your Chromecast with Google TV. Designed for 0.2mm layer heights and prints with no supports. Does a great job preventing accidental volume changes!
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
In order to attach the case to the Prusa Mini in a reasonable way and to find fixing points for the mounting bracket, I had to turn it upside down. Accordingly I renamed both parts. In order to guarantee nevertheless the ventilation, I…
Wydruk około 3,76 €–4,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Available in both branded and unbranded versions, this case offers a protective layer in both a snug and padded variant. The padded version accommodates 1 mm EVA foam lining for added protection. To ensure a flush fit, the latches have…
Wydruk około 4,84 €–5,91 € nettoWstępna wycena jednego wariantu
Print both the lid and the body. The ESP32-C6-DEVKIT-M-1 can be pressed in and should be held in by friction. The tolerances are designed for this purpose. I printed it on my Ender 3 with Prusament PLA Galaxy Black and 0.2mm Layer Height…
Wydruk około 0,95 €–1,17 € nettoWstępna wycena jednego wariantu
The Dyson vacuum cleaner toy is a great thing to keep your child busy while using the big vacuum yourself. But most of the time this thing just keeps lying (and flying) around in our closet which is quite annoying. So I made a wall…
Wydruk około 2,60 €–3,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The case looks like a smiling mouth. Print Settings: Material: PLA, PETG Layer height: 0.15 - 0.20mm Supports: no Perimeters: 2 Download Gear wheel and Spring here: https://www.printables.com/model/231691-fidget-clicking-wheel-20 My Other…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
Phone case for the Samsung A22 Printed in PETG or PLA. Printable in TPU with adjusted scale-factors. (x,y: ca. 99% ; z: ca. 105%) More 3d-printing tips on my website:…
Wydruk około 3,52 €–4,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Système de clips qui permet de fixer une visière sur une casquette standard. Pour la visière j'ai utilisé une feuille transparente percée avec une perforatrice de bureau standard (trous de 5 mm de diamètre). Le but est des pouvoir offrir…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've been working on utilizing Pico remotes to control Zigbee lights through Home Assistant , and I wanted some additional wall mounts for the extra Pico remotes that I wanted to install, so I remixed joshcarter's original wall bracket to…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's made for the LOLIN D1 Mini v4.0.0. The case doesn't fit older versions of the D1 Mini with micro-USB or components on the backside. Video: https://youtube.com/shorts/DUVmJcQiBqA Buy: https://spacehuhn.store/products/deauther-d1-mini…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
So this is a Samsung Galaxy Fold 3 case with an optional add-on of an s-pen(fold edition) holder from the Flip cover case (Link below). The s-pen holder is quickly removable with a slide on hinge. Transfer of the s-pen holder from the…
Wydruk około 2,82 €–3,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Created a Google TV Chromecast Remote Wall Mount Caddy to be mounted to the back of our TV. Used command strips for mounting. Printed in PETG (incase the back of the TV gets hot) at 0.2mm layer height.
Wydruk około 1,56 €–1,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Parts required: 4x m2.5x12mm screws 4x m2.5 nuts While slicing, I used supports for the SD card slot and the screw holes but it's possible they may not all need supports. After printing, poke holes through the thin top layer that is…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
I designed a case to hold every (currently) available screwdriver bit from lttstore.com (with the exception of the bits you store in the regular-sized screwdriver). This case holds 60 20mm bits, AKA the five additional bit sets you can…
Wydruk około 6,83 €–8,35 € nettoWstępna wycena jednego wariantu
Create your own customized electric guitar effortlessly with this modular design. Inspired by the original Prusacaster and using the Harley Benton Electric Guitar Kit T-Style from Thomann too, you can easily swap parts to change the…
Wydruk około 3,27 €–4,00 € nettoWstępna wycena jednego wariantu
BMP280 / BME280 Sensor Case with strain relief for 2-8mm diameter Cables You need 2x M3x10 DIN912 Screws This is a composite Part, click on “Split to Parts” in PrusaSlicer and right click on the intended elements. Add the following Part…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Overview: Looking for a tough, practical way to carry and protect your eyewear? This remix of the Flexi Glasses Case is now part of my RangeVault series—designed for Everyday Carry (EDC) durability and convenience. Whether you’re on the…
Wydruk około 2,96 €–3,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on ISO/IEC 7810 - ID-1 for perfect fit in your credit card wallet. Thickness 4mm.
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
Public domain medieval castle tower model by PineStudio . Originally uploaded to Blend Swap .
Wydruk około 2,65 €–3,24 € nettoWstępna wycena jednego wariantu
I designed this mini-itx case for the 10 inch rack i printed. The tray and the frontpanel are modular so you can remix the frontpanel without printing the whole model again. The case will fit a mini-itx motherboard and 3 2.5" ssds/hdds. I…
Wydruk około 1,72 €–2,11 € nettoWstępna wycena jednego wariantu
Remix of the Korg Volca stand by beejums . This version of the stand will hold 2 Korg Volcas. Additional supports/parts are not required to keep the Korg Volca's in place. Print 2 and slide onto each side of the devices. Originally…
Wydruk około 3,57 €–4,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My daily use 1s LiPo battery case. Very lightweight at only ~35g per case. It fits any pocket. I can keep track of used and unused Lipos by taking new ones from left to right. It does fit the charger/Lipo-checker from BetaFPV. 450 and 550…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I vectorized and transformed an original artwork by Will Pjigg into a design suitable for 3D printing, specifically to embellish my PC case. My computer is placed on an office cabinet next to me, and I thought its large black surface…
Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu
🇮🇪 Fáilte go hÉirinn! ☘ Welcome to Ireland! This model was created by Dany Sánchez . The Rock of Cashel (Irish: Carraig Phádraig ), also known as Cashel of the Kings and St. Patrick's Rock , is a historical site located at Cashel, County…
Wydruk około 2,89 €–3,54 € nettoWstępna wycena jednego wariantu
This a case for the Raspberry Pi 4 that allows you to stack an arbitrary number of cases on top of each other for cluster raspberry pi builds. The thumbnail shows 3 but go as high as you like. Each middle clips into the ones above and…
Wydruk około 0,63 €–0,76 € nettoWstępna wycena jednego wariantu
An RFID chip repair case is a practical accessory designed to address common issues with RFID chips. When a new RFID chip is inexpensive but new one may encounter registration problems, this case offers an alternative. If the side cover…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
The spacing between the holes in the bottom is 18 mm. There are three 2 mm holes for mounting the Nucleo board. You need mini screws like DIN 7981 2,2 mm x 6,5 mm. The holes in the bottom are 3.5 mm to comfortably fit M3 screws. Other…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
So this is MK2 of my Samsung Galaxy Fold 3 case with a built-in stand. I added a matching car mount plate which I use in my daily commute… Just glue the plate to any mounting system you have in your car. I use my own custom mount for…
Wydruk około 2,24 €–2,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This illusion shows the Disney castle from one view and Disney from another
Wydruk około 6,14 €–7,50 € nettoWstępna wycena jednego wariantu
Weather protection with a 3D-printed gill shield (Stevenson screen is a box) for RuuviTag temperature/humidity/pressure sensor. Basically a DIY bluetooth weather station. Keeps the water out yet enables the air and bluetooth to go…
Wydruk około 2,05 €–2,51 € nettoWstępna wycena jednego wariantu
Box designed to hold toothpicks with and without individual plastic casing. Easy access: you can shake out couple toothpicks through hole in lid. I also include a plain box without pattern and lid without hole. Build instructions Print in…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Features Holds 56 standard bits + 9 Long ones (my kit has 52+4, so there are slots to spare) Holds the magnetizer/demagnetizer thingy Has a small pocket for carrying miscellaneous items, plus 7 more slots in the lid, where you can put…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
A case made for mounting your Raspberry Pi4 to your Prusa i3 MK3. Smallest form factor possible for a Pi4. All peripheral ports accessible (not the Pi headers). Break away window for Pi-cam. Windows for status lights. Easy to print: no…
Wydruk około 2,61 €–3,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Two-part 3D printable enclosure case (base + lid) designed for the ESP32 2.8 inch display module (ESP32E). Features a screen window on the lid, ventilation slots, USB port cutout and screw posts for assembly. Footprint 96.4 × 60.4 mm.…
Wydruk około 2,50 €–3,05 € nettoWstępna wycena jednego wariantu
This is a case to house an Arduino Uno board with CNC Shield (V3), plus mount an 80mm fan. The case and fan are assembled using M4 cap head screws. You can use individual screws for each layer, or longer screws for the whole assembly.…
Wydruk około 7,23 €–8,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
simple case for the Redmi Note 7 Print instructions recommended to print with PLA no supports
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
This is a remix of the pax storage case from thingiverse by maker giek2000 . I modified this case to include an insert for the pax charger, so the device can be charged while being stored, combining all accessories in one single neat…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
Hylian Shield Nintendo switch game case. Room for 10 switch games. Holes in both base and lid for 6x3mm magnets. The games are a tight fit to keep them in place during transportation. Photos show the top face of the extruded design…
Wydruk około 4,14 €–5,06 € nettoWstępna wycena jednego wariantu
A case & lid for the DJI Mini 4K drone case & lid, also should work for the Mini 2 / SE / 2 SE based on the drone dimensions from DJI's website - tested on the Mini 4k. Designed to fit pretty well to the shape of the drone, interior is…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Phone case for the Samsung A22 With raised lip (height about 1.5 mm) for a better protection of the display. Compared to the original model, the case is about 1.5 mm thicker. The edge is not flush with the display. Printed in PETG or PLA.…
Wydruk około 3,69 €–4,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed in ASA to be able to withstand the heat in my car. Edit 6/18/24: I added 2 files one for 162mm length phone w/ case and a Step file to be able to adjust the model to your liking. Just make sure the pegs that go into the vents…
Wydruk około 5,98 €–7,31 € nettoWstępna wycena jednego wariantu
For 30x30x2mm aluminum corner profile
Wydruk około 1,91 €–2,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This case is designed for Nixie clocks with top-view tubes, but can easily be modded to accommodate other displays and controls. It is inspired by the lovely midcentury design of the Italy-made IME KB6 calculator input/display unit. The…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
This case was designed to house a Raspberry Pi 5, the Pimoroni NVMe Base and an optional official RPi Active Cooler. It is a 3-part print: The bottom of the case The lid of the case The power button Holes have been added in several places…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The PiSCSI Slim Case protects your Raspberry Pi 4 and PiSCSI (formerly known as RaSCSI), streamlining your vintage computer setup, and looking completely at-home next to your "Snow White" Apple Macintosh computers (like the Macintosh…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
The PiSCSI (formerly known as the RaSCSI) is an exciting project by the retro Mac community, which turns a Raspberry Pi into a virtual SCSI device. It can host virtual hard drives and CD-ROM drives, which can all be attached and detached…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
A simple, stylish, and effective ways to organize your batteries inside your GoPro carrying case. If you're like me, you probably like to put your GoPro, batteries, and various accessories inside the original carrying case when you're…
Wydruk około 4,17 €–5,09 € nettoWstępna wycena jednego wariantu
This screw together case keeps your toothbrush clean and safe while traveling. It needs to be printed in spiral vase mode. Since it is in vase mode, you need to print each part separately. I used a 0.6 mm nozzle with 1 mm external…
Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu
![Business Card Case Holder & Stand [& Credit Card too!] (print-in-place, no support)](https://media.printables.com/media/prints/846c1284-c782-4628-b4ad-1f2f17dfd173/images/11630392_08724ebf-b08e-42b6-a261-58a1bf8a7450_f93918e8-9f3f-411a-b996-adeb883684e5/version-2.jpg)
