113 modeli
spent primer catcher with side pipe for garden hose / tube with 12mm inner diameter. just klick in place. tube direct to a bucket or use adapter and drill a hole in water bottle cap for easy dispensing. modded the catcher and made also a…
Wydruk około 4,84 €–5,91 € nettoWstępna wycena jednego wariantu
Replacement fastener for RCBS Primer Catcher fastener. If you reload your own bullets, and have an RCBS reloading press with a primer catcher, but have broken or lost the little crecent-shaped fastener piece that holds it in place,…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Drain pan with a spout for removing powder from the RCBS Chargemaster Supreme. I did calculate the volume of the pan I felt like I needed to stop the flow of powder, dump and then resume. So, depending on the amount in your hopper watch…
Wydruk około 4,14 €–5,06 € nettoWstępna wycena jednego wariantu
A selection of Lego CCBS compatible pieces. Attached pictures show examples of Bionicle MOCs build using these 3D printed arms and legs. I recommend to print in PETG (this is what I've tested). UPDATE. After few months the sockets got a…
This is a remix to use 9 mm garden hose with this spent primer catch. These hoses have a 15 mm outside diameter which fit snug into the device. It is necessary to shave off a bit inside the hose to prevent that spent primers get stuck…
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System frame/"bone" elements produced by Lego from 2011-2016 for the Heo Factory and g2 Bionicle lines. All elements are compatible with one…
This is an OpenSCAD recreation of Adafruit's Adafruit Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs . You will still need stand-offs, and the printed versions are going to probably be too flexible for more permeant uses. That said,…
About Any owner of the RCBS Rockchucker IV knows it's a great reloading press for making high precision ammo, but the primer catch is horrible. This improved primer catch is optimized to catch every primer and leave extra room where you…
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System armor elements produced by Lego from 2011-2016 for the Heo Factory and g2 Bionicle lines. All elements are compatible with one another, as…
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System hands, feet, and armor accessory elements produced by Lego from 2011-2016 for the Hero Factory and g2 Bionicle lines. All elements are…
This insert works similarly to the old straw mod, except without the risk of pushing it too far inside the tube. The ChargeMaster tube is threaded, which moves the powder forward, but that threading causes extruded powder like Varget to…
I used the base version of DIN Rail Mount PCB (Wago 280) from @Fritzinator and added two variations: Clamp version : you can use this version to just clamp a PCB in between (There's a left and right version). Hex bolt version: you can…
To prevent spent primers jumping all over the place, you can insert these fillers into the slot of the ram of your RCBS press. Both have the same function, the T-shaped one comes out with the shell holder, the other one can stay in the…
There are other Rock Chucker primer guides, but mine uses 5x3mm magnets. I also include the F360 file so you can tune and adjust this as necessary. Since different Rock Chuckers have a different length slot in the ram, I provide both a…
The files provided are to replace all the plastic tumbler parts for a Hornady Case Tumber. The STEP files are included so you can modify it if you would like. This design may work for RCBS tumblers as well. Print with ABS+, PETG, or even…
This will print without supports in any material with any infill.
Adafruit has the Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs and included a link to a KiCad python script to generate the same. But I don't have or know how to use KiCad but I do know how to use Fusion 360. Using the description I…
This is a replacement “Drop Tube” for the RCBS powder hopper that came with my Rock Chucker Reloading Press, which I purchased in the late 90's. I haven't been able to locate this as a replacement part on the RCBS website, and this one…
TP4056 LX-LCBST type Drawn using Freecad. Easy customization by changing the value in the Spreadsheet
Hand priming can be painful after a few hundred rounds. I designed this snap over grip for the RCBS hand primer so that I can use the full leverage of my palm. Additionally, there are shields for between your thumb and index finger, as…
Do spent primers like to escape out the front of your Rock Chucker ram when you're decapping? This plug will fix that. To install: Raise the ram. Slide the plug in from the front until it is sunk below the outer surface of the ram. Lower…
Original ones didn't work well with my ender 3 pro and kobra neo. This part is edited for 0.4mm nozzle for easier printing on cheaper fdm printers
Case for Homematic "HmIP-PCBS" board
This is a easy to print case / enclosure for a Homematic HmIP-PCBS board that can be used as a repeater / range extender for a Homematic IP network. This box is tiny. I used a small piece of double sided tape to glue it to the wall where…
When I first printed Lucky 13, I noticed how similar one of the pieces was to a Lego piece i had lying around. I then had an idea: if Lucky 13 and Lego use similar ball and socket joints, then if I were to scale up the Lucky 13 parts, it…
Fits on Küpper/Kuepper Pegboard and holds RCBS Lube Pad and Bottle for reloaders.
This part keep you collets and die parts better organized in the RCBS box. It is reversible if you prefer the die on the other side. Category: Tool Holders & Boxes
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System weapon and tool elements produced by Lego from 2011-2016 for the Hero Factory and g2 Bionicle lines. All elements are compatible with one…
Vassoio per la raccolta inneschi spenti per Pressa per ricarica munizioni RCBS Rock Chucker. Gli inneschi vengono raccolti meglio rispetto al vassoio originale. Non cascano a terra e rimangono raccolti e pronti per essere smaltiti.
Read the included RCBS Primer Feed.pdf for more info.
Soporte PCBs Para tubo de aluminio de 20x10 mm. Necesario imprimir: 2 zapatas 2 soportes 4 mandos de ajuste 6 tapones tubo Ferreteria 4 tornillos rosca chapa 3x8mm 4 tornillos de 3x10mm 2 tornillos de 4x30mm (largo aproximado) 2 tuercas…
The goal for this model was to find a solution for soldering small PCBs. I always had difficulties with holding the soldering iron stable and this is relatively important with small PCBs. That's why I wanted to design a soldering help to…
Most reloading trays that come with reloading equipment won't fit 45-70 brass. This is a 25 hole reloading tray that will fit 45-70 brass. I based it off of the original RCBS tray design, which has the two over-hanging “handles” on the…
Custom CCBS bionicle / hero factory pieces Also includes: https://www.thingiverse.com/thing:7013059 https://www.thingiverse.com/thing:7002124 Edit 05.09.25 - added beam7, beam8 and beam9 Edit 31.12.25 - added beam10, I recommend printing…
Expressive/dynamic hand compatible with lego ball joints, i thought would be useful. In the photos the print has primer sprayed on top. Probably any print orientation requires supports so keep their placement in mind. I printed the hand…
A collection of various bullet puller collet holders for different brands of collets. These are all older versions of collet holders I sell at azjake.com/shop. They all print without supports and with zero post processing.
Case for HmIP-PCBS2 actor from HomematicIP with relais board installed. Easy to print, no supports needed. You might need to press the clip for the board in with your finger before it moves freely and you can clip in the PCB. One version…
simple model of the powder measure adapter that comes with the powder measure for mounting it to the bench. Will be making additional models for raised stands, etc.
I created this to help from knocking it over and making a mess… especially after I filled the hallow base of the trickler with some cast bullets. I used m3 bolts to hold the trickler in place along with a tight friction fit. I printed it…
There are 3mm spaces below the board and 18mm spaces above the PCB. There are two lids. The first is with holes for DUPONT couplings and a 5110 display and the second is solid. The box is equipped with eyelets for mounting on surfaces. It…
It's beam A 4m but with space for pin Included in: https://www.printables.com/model/1404798-various-custom-ccbs-pieces
The only difference between the one pictured and the STL supplied is that I swapped the small primer rod and the little threaded screw for swapping between large ans small. It's better having the rod behind but as it's still usable as I…
RCBS POWDER MEASURE Tube 190mm replacement I broke mine, so designed a slip over, dab of glue helps keep it place. Best made with transparent filament (green if you looking for stock)
This is top mounting for TP4056 LX-LCBST type. The parameter can be customized on the Freecad Spreadsheet inside the file. Just change the numbers in the yellow cell. Im just learning to draw using Freecad so any suggestion are welcome.
Designed for the Lee APP, but compatible with other presses requiring similar Output Chute. Developed by the Reloading & More AD1966 team, the Chute/Funnel features a wide spout to ensure uninterrupted flow, a protective and replaceable…
This is a Remix of https://www.thingiverse.com/thing:3916949 Made it longer to fit the RCBS Rock Chucker II press. This is useful if you want the primers to fall to the bottom of the ram and prevent them from spitting out the front of the…
I got tired of primers of primers going everywhere on the RCBS Turret press so I created this primer catch chute to be able to direct the primers where I wanted them to go
I like to have my reloading tools organized so i made a box for my RCBS bullet puller die plus 4 collets.
Got a nice RCBS 10-10 Scale but it was missing the dust cover. This is my attempt at creating a new one. To make it all rounded like the original, you either need a LOT of supports or it looks horrible like this one: Added a bevel to the…
Spill tray to collect powder that bounces off during dispensing on RCBS Chargemaster Supreme. Still allows for full operation of the device. The .scad file is easily configurable to allow for taller walls if the powder still bounces off.
its a very rough draft, might be a bit to small going to do some redesigns within the week
Support Post with 51mm hight. General purpose. Built for soldering large PCBs on MHP30
Copy of RCBS' Shell Rack. Haven't printed yet ... work in progress. Sloped and Flat designs included. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2-ish Infill: 10-20% Filament: eSun PLA+…
Description: This distance piece, together with a M3 nut and a screw serves as a spacer for a PCB in order to attach the PCB to a surface. I recommend to print at least 4 pieces per PCB. For the rest, I hope the pictures are…
Elevate your reloading experience with our custom-designed, 3D printed bench top holder, crafted exclusively for the RCBS Turret. This innovative accessory is the perfect addition to your reloading bench, providing a seamless and…
ORBITA FLEX has been designed to use 2 LED ring lights to illuminate your living space as you like it. The housing is very easy to mount to any given surface by using only 2 screws. The ORIBITA rings can easily be clicked into the housing…
Details can be found as well on : https://laderampe.net/ITatHome/WLED No Supports. Printed on Voron V2 (min. 280mm bed required) with esun ABS+ fire red, 0.2mm Warning / Safety Notice No liability or warranty of any kind is assumed.…
Part of the greebles video on my channel: First, PCBs To make your own, you'll need to get the PCBs ordered first, because there will probably be a bit of a wait time on that order (1-2 weeks or so). The PCBs are the ones that give this…
This a is just another part of me moving things off the bench to the peg board, I've taken to printing the pegs separate from part so I have included both versions Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
This is a pen holder holds pens with ~10mm diameter and is installed instead of the proximity sensor on the right side of the extruder. This allows for fast switching between regular printing and pen holder mode. You can use it to create…
A simple way to stack PCBs, especially while they are waiting to be populated. Works with populated boards too, providing there is a little bit of the edge to hold on to. Design is parametric within Fusion 360 - just change the number of…
This is a slightly tweaked version of Open Hardware Design's awesome IoT button . The design is great. Their instructions are awesome. So I am going to keep this brief. The original version was not very flexible in the size of PCBs it…
Somewhat parametric mounting bracket for PCBs. The STL is for a 7 cm x 5 cm proto PCB, but you can easily change that in the included OpenSCAD file. I have uploaded two variants: one for a common DIN rail clip, and another one with…
also need: 2 magnets (6x2mm)
So this is an upgrade of the adapter base that allows for a much easier and repeatable use of the RCBS 505 scale. I had used that version for a number of years and enjoyed it, but after seeing The Target Master video on Youtube of just…
No supports required. If you need a grid of a different size, you can get it from Darren's fusion 360 model, then it's just a case of adding a honeycomb piece to the back. Rather than use standoffs I've had success using 16mm M3 bolts,…
Organize and store your powder or shot bushings effortlessly with these wall-mounted racks. The powder rack can hold up to eight bushings with a 0.875" (7/8") outside diameter, while the shot rack accommodates eight bushings with a 1"…
Este diseño fue desarrollado para ser compatible con una amplia variedad de PCBs (tarjetas) bootleg chinas para Famicom, ya que existen numerosos fabricantes y revisiones diferentes. Para lograr esa compatibilidad, el interior del…
Primer feed tube adapter for the RCBS Piggyback press. A piece that often breaks and is not available anymore "anywhere". Here is the small and the larger primer version. Prints best on a resin printer, but FDM with high resolution should…
This replaces the factory cap on the RCBS Uniflow powder dispenser with a cap that allows you to put a removeable label plate to keep tract what powder you have in the hopper tube. The label plate was designed to print as many as you need…
Vise mount for the RCBS Automatic Priming Tool. I didn't want to mount it permanently to my bench. This mounts in a vise, and hangs on the wall when not in use. It also has provision for 2 Akro bins. The section that mounts in the vise…
09/13/2026...I just uploaded the correct file and deleted the other one. I had the unfinished file that didnt have bevels on the nubs on the inside of the cap produced a replacement powder hopper cap for the RCBS Chargemaster 1500…
Case for Discipline65 keyboard with PCBsnap mounting. I was amazed how PCBsnap mounting worked on my other mechanical keyboards so I tried to create my own case that is supporting this style of mount. Disclaimer: None of the links are…
Strong tray to store RCBS collets. I print with 5/5/5 walls/top/bottom and 25% gyroid infill for strength.
The Tubular Mounting Grid for 0.1" Spaced PCBs is inspired by the Adafruit Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs. It is designed for multi-directional projects that integrate electronics prototyping. The tube has a depth and…
Replacement for the original rubber vibration isolation feet. This print makes use of the original hardware including the nut that is glued inside. Part dimensions should be close enough to allow replacing of only one foot as needed but…
Introducing our innovative, custom-designed 3D printed wall-mounted holder, specifically crafted for 1 RCBS Turret. This unique accessory offers fast and secure storage, revolutionizing the way you organize your reloading bench. Key…
To make nice LED art projects with ESP32 / ESP8266 and WLED or FastLED Software.
The Mounting Grid Disk for 0.1" Spaced PCBs is inspired by the Adafruit Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs. It is designed for cylindrical projects that integrate electronics prototyping. The disk has an outer diameter of…
Ich habe eine Halterung für einen Homematic HmIP-PCBS2 Aktor in einem Sommer Antriebe Schaltkasten gezeichnet und gedruckt. Mit dem Modul kann über ein Handy oder andere Homematic Taster usw. das Hoftor geöffnet werden. Die Halterung…
Helps when packaging part kits for the Dreame Adapter PCBs (for flashing Valetudo). Sources for the PCBs https://github.com/Hypfer/valetudo-dreameadapter
Supporto HSW per parete attrezzata Honeycomb Storage Wall per RCBS Universal hand Primer. Il supporto può essere fissato alla parete attrezzata attraverso due inserti standard.
For individuals reloading with RCBS MatchMaster dies, this holds 7 neck bushings and fits inside the die case. You may need to sand the lid slightly with 600 grit sandpaper to get the proper interference fit depending on your filament and…
Replace the RCBS Chargemaster factory cap with this cap that has a label plate holder so you can keep track of what powder you have in the hopper. I will also have a file for the label plate which you can either modify to print what it…
Pilot for RCBS case trimmers. 0.152 inch diameter shank. Might be a tight fit the first case but cranking and slowly applying pressure it should work itself into the case mouth. Not sure on the lifespan of this pilot but should work good…
Just another tool holder for reloading as I continue to move things from nails and the like onto the pegboard, this time for the RCBS trim plates that I have, again if anyone wants the numbering changed just ask. At some point I'll sort…
Just a holder for the RCBS collet bullet puller tool. This only holds 4 of the collets but that is all I have at this time so I didn't make it any larger. As well it pushes the max size horizontal on the Ender 3. When I buy more collet…
This is the mounting plate described in our blog post: https://subreption.com/blog/fpv-ipc-reverse-engineering/ This is not a drone related design and cannot be used for any other purpose except providing lab test assembly support , like…
I needed an easy way to mount my Logitech Brio above my monitor without it resting on top of it (the bezel was thin enough that the webcam base obscured some of my screen). The insert sits within the slots for the VESA mounting plate of…
It is a shorter lid for the round RCBS reloading tray to prevent small rifle or small pistol primers from being able to flip over inadvertently in the primer tray. The top of the tray is marked with SPP/SRP. I tried printing it with clear…
This tray used to collect powder that bounces off during dispensing. Printed with PLA White so easy to see spilled powder, Shout out to missingno for the spill tray designed for the RCBS Chargemaster Supreme and the customizable Scad file.
Customizable Soldering Jig For Soldering PCBs With Alignment Holes Author: Brian Khuu (2019) If you use alignment pins in your project to help align your castellation modules with your PCB, you may find this useful. Defaults below assumes…
This is a was going to happen sooner or later as it is just the evolution of the collet holder I had done up before but this is for the pegboard to go with everything else I have moved to the pegboard. I still have another version of this…
Simple case with text for prototype PCBs. Case fit PCBs in dimension 5 x 7 cm with small gap for easy put out.
Atleast some (mine, atleast) shifters that use hall effect sensors have mounting holes in different place
Remixed Meliodas' RCBS 5-0-2 Foot design to add support and make hole bigger, glued the original screw into the new foot. RCBS Foot V3 file. Changed the hole to go all the way through so that the end of the screw sits on the table. Also…
socket organiser for cornwell set CBSM823S 8 piece set with numbers, multicolor not required but give an awsome pop to the numbers!
Ein einfach zu druckendes Gehäuse für ein HmIP-PCBS. Keine supports nötig (den Deckel auf dem Kopf stehend drucken). Zur Zugentlastung werden die Kabel mittels Kabelbindern festgezurrt. Der Deckel mit mit 2x M4x12 Senkkopfschrauben an den…
